Project

General

Profile

Actions

Bug #1381

closed

Chirp seems to randomly enable "beep prompt" in settings

Added by M B about 10 years ago. Updated about 10 years ago.

Status:
Closed
Priority:
Normal
Assignee:
Category:
-
Target version:
Start date:
01/19/2014
Due date:
% Done:

100%

Estimated time:
Chirp Version:
daily
Model affected:
UV-B6
Platform:
All
Debug Log:
I read the instructions above:

Description

I'm having a hard time pinning down exactly what causes this, but CHIRP seems to randomly enable the "beep prompt" in UV-B6.

If I toggle off "beep prompt" and save and upload the file to the radio, beep prompt is still enabled.

Saving and re-loading the file in Chirp shows the beep prompt re-enabled.

Disabling the beep prompt in the radio, downloading the image off the radio, and saving it to disk seems to work for a while, but at some point it gets randomly re-enabled.

I'd take any advice or suggestions, or toubleshooting, or requests to help pin this down.

Actions #1

Updated by Jim Unroe about 10 years ago

  • Assignee set to Jim Unroe
  • Target version set to 0.4.0
  • Platform changed from Windows to All

Mike,
I can duplicate the problem here with my UV-B5. I am working on it.
Jim KC9HI

Actions #2

Updated by Jim Unroe about 10 years ago

Patch submitted.

Actions #3

Updated by Jim Unroe about 10 years ago

  • Status changed from New to Closed
  • % Done changed from 0 to 100
Actions

Also available in: Atom PDF