CHIRP

Do you have a programming cable and the Icom software? Typically I need either programming software or ability to program via the front panel before I can reverse engineer the memory.

Have the programming software. Haven't done a lot of looking into for the programming cable but I'll do a little research on that.

I'll also need the radio and programming cable. See Rules for loaning a radio.

Alright. Finally have everything together. Had to wait on the programming cable to get here from Hong Kong. My understanding (after reading the rules) is that you will need a copy of the programming software (which I have uploaded), the radio (which has power poles) and the programming cable. I don't believe a microphone will be needed but please correct me if I am wrong.

It is NOT OKAY to upload commercial licensed software to this page. Any and everyone has the ability to view and download those items, which puts the chirp project and development team at a huge legal liability risk. Please DO NOT DO THAT AGAIN.

Software must be shipped on some sort of legal media with your radio.

Thanks for your understanding and further consideration.

Sorry about that. Pretty sure I uploaded everything minus the product keys (won't install without them) but it won't happen again.

Take your time. I'm trying to get a hold of one of the 128 channel radios as well but those are little more difficult to come by.

Hi All. I have an 8 channel VHF IC-F121s (non-Display) available for loan. I know the LCD and non-LCD software is different on older model ICOM LMR/PMR Radios. Does that help move this forward?