MacOS Tips

Version 13 (Dan Smith, 03/26/2014 10:51 am)

1 13 Dan Smith
h1. Application Security in 10.9.x
2 13 Dan Smith
3 13 Dan Smith
As of 10.9, signed packages are required by default. Apple charges for this capability, and requires use of their tooling to do it. For the time being, MacOS users should disable signed package checking for CHIRP. Instructions provided by Jim, K2SON:
4 13 Dan Smith
5 13 Dan Smith
 # Locate the app in Finder.
6 13 Dan Smith
 # Right click (control-click if you don't have a Magic Mouse) on the app and click Open.
7 13 Dan Smith
 # You will get a dialog box about it being an unsigned app, click the Open button.
8 13 Dan Smith
 # Enter the userid and password of the Administrative login.
9 13 Dan Smith
 # The app will now be flagged to allow it to be opened normally in the future.
10 13 Dan Smith
11 13 Dan Smith
Alternately, you can disable them for your entire system, although this has security implications that should not be ignored. Instructions for this provided by Tom, KD7LXL:
12 13 Dan Smith
13 13 Dan Smith
 # Open your System Preferences
14 13 Dan Smith
 # Go to Security & Privacy, General tab.
15 13 Dan Smith
 # Click the lock
16 13 Dan Smith
 # Then choose Allow apps downloaded from: Anywhere.
17 13 Dan Smith
18 11 Tom Hayward
h1.  Mac USB Drivers 
19 1 Dan Smith
20 11 Tom Hayward
h2.  FTDI cables
21 6 Dave Nathanson
22 1 Dan Smith
23 6 Dave Nathanson
Version 1.5.1 is available for Mac OS X on 64 bit, 32 bit and PPC machines. 
24 6 Dave Nathanson
25 11 Tom Hayward
h2. Prolific PL-2303 cables - official drivers for the genuine Prolific cables
26 11 Tom Hayward
27 6 Dave Nathanson 
28 6 Dave Nathanson
Login as guest/ guest & look in the Support section. Specified to work with Mac OSX 10.6, 10.7, & 10.8. 
29 1 Dan Smith
30 11 Tom Hayward
h2. Generic PL-2303 cables (counterfeit and/or “Generic”)
31 11 Tom Hayward
32 1 Dan Smith
For Lion (10.7.x) and Mountain Lion (10.8.x):
33 1 Dan Smith
34 11 Tom Hayward
35 9 Dave Nathanson
For earlier versions of Mac OS X up to 10.5 Leopard. Also some reports of success with Snow Leopard, Lion:
36 1 Dan Smith
37 1 Dan Smith
38 11 Tom Hayward
h2. RTSystems cables
39 11 Tom Hayward
40 1 Dan Smith
41 1 Dan Smith
42 1 Dan Smith
43 11 Tom Hayward
h2. Silicon Labs CP210x USB to UART Bridge VCP Drivers (including Kenwood TH-D72)
44 11 Tom Hayward
45 12 Tom Hayward
46 12 Tom Hayward
Macintosh OSX driver for the Intel and PowerPC Platforms versions 10.4, 10.5, 10.6, 10.7, 10.8, and 10.9.
47 1 Dan Smith
48 11 Tom Hayward
h1. Tips
49 1 Dan Smith
50 11 Tom Hayward
* In many cases you need to connect the cable to the radio first, then power the radio on, while holding down some buttons. The exact procedure varies by radio.
51 11 Tom Hayward
* Some radios need to be put into a "clone" mode to transfer to PC, some radios may need to be configured to use the mic/speaker jacks for PC transfer instead of for the speaker/mic. The exact procedure varies by radio. 
52 11 Tom Hayward
* You will need to download from the radio to CHIRP first, before uploading anything to the radio. CHIRP creates a template from the radio download so it knows how to talk to the radio. 
53 11 Tom Hayward
* If you want to download from one radio and upload those settings to another radio, first download from each radio to a separate “tab” of CHIRP. Then copy/paste from one tab to the other & upload back to the same radio that produced that tab. Do not try to upload to a radio directly from a tab that was not downloaded from that same radio. 
54 11 Tom Hayward
* Many USB to serial cables include a counterfeit Prolific chip. This can cause connection problems because the official Prolific driver will ignore the counterfeit chip. Some people have reported success by using an older version of the Prolific driver, or a 3rd party driver. 
55 11 Tom Hayward
* If you are using multiple USB cables, each will create a different “virtual port”, meaning that you will need to select the correct virtual port for your radio when connecting to your radio. CHIRP will give you this opportunity each time you download from the radio. 
56 11 Tom Hayward
* If CHIRP won’t launch & won't run, you may have neglected to install the Python runtime. CHIRP needs that. Even though Mac OS X includes Python built-in, the runtime has to be installed is because it includes PyGTK and some other libraries that Chirp requires, in addition to Python itself:
57 11 Tom Hayward
* If your radio is not "Supported", you can try downloading the newest Daily Build to see if support was recently added.
58 1 Dan Smith
59 11 Tom Hayward
h1. Troubleshooting
60 8 Dave Nathanson
61 11 Tom Hayward
You can verify that the drivers are installed & working by connecting the USB cable to your Mac, then running “System Profiler”, or “System Information” (found in  /Applications/Utilities ). When the USB cable is connected and drivers correctly installed, the cable will show up in the USB section of the System Profiler. 
62 6 Dave Nathanson
63 11 Tom Hayward
Another way to see that the driver is correctly installed is to open Terminal and type:
64 6 Dave Nathanson
65 11 Tom Hayward
    ls /dev/cu*
66 6 Dave Nathanson
67 11 Tom Hayward
It will return a list of virtual serial ports including something similar to:
68 6 Dave Nathanson
69 11 Tom Hayward
    /dev/cu.usbserial-A501XQ5I     (suffix will vary)
70 6 Dave Nathanson
71 11 Tom Hayward
You may also type:
72 6 Dave Nathanson
73 11 Tom Hayward
74 6 Dave Nathanson
75 6 Dave Nathanson
That will return a long list of kexts, including something similar to this at the bottom (most recently installed are listed last):
76 6 Dave Nathanson
77 11 Tom Hayward
    142    0 0xffffff7f81fc8000 0x8000      0x8000     com.FTDI.driver.FTDIUSBSerialDriver (2.2.18) <112 32 5 4 3 1>
78 11 Tom Hayward
79 6 Dave Nathanson
Look at the CHIRP log for clues.
80 6 Dave Nathanson
81 11 Tom Hayward
82 11 Tom Hayward
83 6 Dave Nathanson
Join the Mailing list & search the archives for similar problem reports & how they were resolved, and/or ask the group. Please include enough info about the problem and situation so the community will be able to help you. 
84 6 Dave Nathanson
85 1 Dan Smith
Not all functionality is supported on all radios. See "Model Support":
86 1 Dan Smith
87 11 Tom Hayward
h2. CHIRP Beginners Guide
88 11 Tom Hayward
89 11 Tom Hayward
[[Beginners Guide]]