# Copyright 2014 Ron Wellsted M0RNW # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . """Wouxun KG-UV8D radio management module""" import time import logging from chirp import util, chirp_common, bitwise, memmap, errors, directory from chirp.settings import RadioSetting, RadioSettingGroup, \ RadioSettingValueBoolean, RadioSettingValueList, \ RadioSettingValueInteger, RadioSettingValueString, \ RadioSettings import struct LOG = logging.getLogger(__name__) CMD_ID = 128 CMD_END = 129 CMD_RD = 130 CMD_WR = 131 MEM_VALID = 158 AB_LIST = ["A", "B"] STEPS = [2.5, 5.0, 6.25, 10.0, 12.5, 25.0, 50.0, 100.0] STEP_LIST = [str(x) for x in STEPS] ROGER_LIST = ["Off", "BOT", "EOT", "Both"] TIMEOUT_LIST = ["Off"] + [str(x) + "s" for x in range(15, 901, 15)] VOX_LIST = ["Off"] + ["%s" % x for x in range(1, 10)] BANDWIDTH_LIST = ["Narrow", "Wide"] VOICE_LIST = ["Off", "On"] LANGUAGE_LIST = ["Chinese", "English"] SCANMODE_LIST = ["TO", "CO", "SE"] PF1KEY_LIST = ["Call", "VFTX"] PF3KEY_LIST = ["Scan", "Lamp", "Tele Alarm", "SOS-CH", "Radio", "Disable"] WORKMODE_LIST = ["VFO", "Channel No.", "Ch. No.+Freq.", "Ch. No.+Name"] BACKLIGHT_LIST = ["Always On"] + [str(x) + "s" for x in range(1, 21)] + \ ["Always Off"] OFFSET_LIST = ["+", "-"] PONMSG_LIST = ["Bitmap", "Battery Volts"] SPMUTE_LIST = ["QT", "QT+DTMF", "QT*DTMF"] DTMFST_LIST = ["DT-ST", "ANI-ST", "DT-ANI", "Off"] DTMF_TIMES = ["%s" % x for x in range(50, 501, 10)] RPTSET_LIST = ["X-TWRPT", "X-DIRRPT"] ALERTS = [1750, 2100, 1000, 1450] ALERTS_LIST = [str(x) for x in ALERTS] PTTID_LIST = ["BOT", "EOT", "Both"] LIST_10 = ["Off"] + ["%s" % x for x in range(1, 11)] SCANGRP_LIST = ["All"] + ["%s" % x for x in range(1, 11)] SCQT_LIST = ["All", "Decoder", "Encoder"] SMUTESET_LIST = ["Off", "Tx", "Rx", "Tx/Rx"] POWER_LIST = ["Lo", "Hi"] HOLD_TIMES = ["Off"] + ["%s" % x for x in range(100, 5001, 100)] RPTMODE_LIST = ["Radio", "Repeater"] # memory slot 0 is not used, start at 1 (so need 1000 slots, not 999) # structure elements whose name starts with x are currently unidentified _MEM_FORMAT = """ #seekto 0x0044; struct { u32 rx_start; u32 rx_stop; u32 tx_start; u32 tx_stop; } uhf_limits; #seekto 0x0054; struct { u32 rx_start; u32 rx_stop; u32 tx_start; u32 tx_stop; } vhf_limits; #seekto 0x0400; struct { u8 model[8]; u8 unknown[2]; u8 oem1[10]; u8 oem2[10]; u8 unknown2[8]; u8 version[10]; u8 unknown3[6]; u8 date[8]; } oem_info; #seekto 0x0480; struct { u16 lower; u16 upper; } scan_groups[10]; #seekto 0x0500; struct { u8 call_code[6]; } call_groups[20]; #seekto 0x0580; struct { char call_name[6]; } call_group_name[20]; #seekto 0x0800; struct { u8 ponmsg; char dispstr[15]; u8 x0810; u8 x0811; u8 x0812; u8 x0813; u8 x0814; u8 voice; u8 timeout; u8 toalarm; u8 channel_menu; u8 power_save; u8 autolock; u8 keylock; u8 beep; u8 stopwatch; u8 vox; u8 scan_rev; u8 backlight; u8 roger_beep; u8 mode_sw_pwd[6]; u8 reset_pwd[6]; u16 pri_ch; u8 ani_sw; u8 ptt_delay; u8 ani[6]; u8 dtmf_st; u8 bcl_a; u8 bcl_b; u8 ptt_id; u8 prich_sw; u8 rpt_set; u8 rpt_spk; u8 rpt_ptt; u8 alert; u8 pf1_func; u8 pf3_func; u8 workmode_b; u8 workmode_a; u8 x0845; u8 dtmf_tx_time; u8 dtmf_interval; u8 main_ab; u16 work_cha; u16 work_chb; u8 x084d; u8 x084e; u8 x084f; u8 x0850; u8 x0851; u8 x0852; u8 x0853; u8 x0854; u8 rpt_mode; u8 language; u8 x0857; u8 x0858; u8 x0859; u8 x085a; u8 x085b; u8 x085c; u8 x085d; u8 x085e; u8 single_display; u8 ring_time; u8 scg_a; u8 scg_b; u8 x0863; u8 rpt_tone; u8 rpt_hold; u8 scan_det; u8 sc_qt; u8 x0868; u8 smuteset; u8 callcode; } settings; #seekto 0x0880; struct { u32 rxfreq; u32 txoffset; u16 rxtone; u16 txtone; u8 unknown1:6, power:1, unknown2:1; u8 unknown3:1, shift_dir:2, unknown4:2, mute_mode:2, iswide:1; u8 step; u8 squelch; } vfoa; #seekto 0x08c0; struct { u32 rxfreq; u32 txoffset; u16 rxtone; u16 txtone; u8 unknown1:6, power:1, unknown2:1; u8 unknown3:1, shift_dir:2, unknown4:2, mute_mode:2, iswide:1; u8 step; u8 squelch; } vfob; #seekto 0x0900; struct { u32 rxfreq; u32 txfreq; u16 rxtone; u16 txtone; u8 unknown1:6, power:1, unknown2:1; u8 unknown3:2, scan_add:1, unknown4:2, mute_mode:2, iswide:1; u16 padding; } memory[1000]; #seekto 0x4780; struct { u8 name[8]; } names[1000]; #seekto 0x6700; u8 valid[1000]; """ # Support for the Wouxun KG-UV8D radio # Serial coms are at 19200 baud # The data is passed in variable length records # Record structure: # Offset Usage # 0 start of record (\x7d) # 1 Command (\x80 Identify \x81 End/Reboot \x82 Read \x83 Write) # 2 direction (\xff PC-> Radio, \x00 Radio -> PC) # 3 length of payload (excluding header/checksum) (n) # 4 payload (n bytes) # 4+n+1 checksum - byte sum (% 256) of bytes 1 -> 4+n # # Memory Read Records: # the payload is 3 bytes, first 2 are offset (big endian), # 3rd is number of bytes to read # Memory Write Records: # the maximum payload size (from the Wouxun software) seems to be 66 bytes # (2 bytes location + 64 bytes data). @directory.register class KGUV8DRadio(chirp_common.CloneModeRadio, chirp_common.ExperimentalRadio): """Wouxun KG-UV8D""" VENDOR = "Wouxun" MODEL = "KG-UV8D" _model = b"KG-UV8D" _file_ident = b"KGUV8D" BAUD_RATE = 19200 POWER_LEVELS = [chirp_common.PowerLevel("L", watts=1), chirp_common.PowerLevel("H", watts=5)] NEEDS_COMPAT_SERIAL = False _record_start = 0x7D def _checksum(self, data): cs = 0 for byte in data: cs += byte return cs % 256 def _write_record(self, cmd, payload=None): # build the packet _length = 0 if payload: _length = len(payload) _packet = struct.pack('BBBB', self._record_start, cmd, 0xFF, _length) if payload: # add the chars to the packet _packet += payload # calculate and add the checksum to the packet _packet += bytes([self._checksum(_packet[1:])]) LOG.debug("Sent:\n%s" % util.hexprint(_packet)) self.pipe.write(_packet) def _read_record(self): # read 4 chars for the header _header = self.pipe.read(4) if len(_header) != 4: raise errors.RadioError('Radio did not respond') _length = struct.unpack('xxxB', _header)[0] _packet = self.pipe.read(_length) _cs = self._checksum(_header[1:]) _cs += self._checksum(_packet) _cs %= 256 _rcs = self.pipe.read(1)[0] LOG.debug("_cs =%x", _cs) LOG.debug("_rcs=%x", _rcs) return (_rcs != _cs, _packet) # Identify the radio # # A Gotcha: the first identify packet returns a bad checksum, subsequent # attempts return the correct checksum... (well it does on my radio!) # # The ID record returned by the radio also includes the current frequency range # as 4 bytes big-endian in 10 Hz increments # # Offset # 0:10 Model, zero padded (Use first 7 chars for 'KG-UV8D') # 11:14 UHF rx lower limit (in units of 10 Hz) # 15:18 UHF rx upper limit # 19:22 UHF tx lower limit # 23:26 UHF tx upper limit # 27:30 VHF rx lower limit # 31:34 VHF rx upper limit # 35:38 VHF tx lower limit # 39:42 VHF tx upper limit # @classmethod def match_model(cls, filedata, filename): return cls._file_ident in filedata[0x400:0x408] def _identify(self): """Do the identification dance""" for _i in range(0, 10): self._write_record(CMD_ID) _chksum_err, _resp = self._read_record() LOG.debug("Got:\n%s" % util.hexprint(_resp)) if _chksum_err: LOG.error("Checksum error: retrying ident...") time.sleep(0.100) continue LOG.debug("Model %s" % util.hexprint(_resp[0:7])) if _resp[0:7] == self._model: return if len(_resp) == 0: raise Exception("Radio not responding") else: raise Exception("Unable to identify radio") def _finish(self): self._write_record(CMD_END) def process_mmap(self): self._memobj = bitwise.parse(_MEM_FORMAT, self._mmap) def sync_in(self): try: self._mmap = self._download() except errors.RadioError: raise except Exception as e: raise errors.RadioError("Failed to communicate with radio: %s" % e) self.process_mmap() def sync_out(self): self._upload() # TODO: This is a dumb, brute force method of downloading the memory. # it would be smarter to only load the active areas and none of # the padding/unused areas. def _download(self): """Talk to a Wouxun KG-UV8D and do a download""" try: self._identify() return self._do_download(0, 32768, 64) except errors.RadioError: raise except Exception as e: LOG.exception('Unknown error during download process') raise errors.RadioError("Failed to communicate with radio: %s" % e) def _do_download(self, start, end, blocksize): # allocate & fill memory image = b"" for i in range(start, end, blocksize): req = struct.pack('>HB', i, blocksize) self._write_record(CMD_RD, req) cs_error, resp = self._read_record() if cs_error: # TODO: probably should retry a few times here LOG.debug(util.hexprint(resp)) raise Exception("Checksum error on read") LOG.debug("Got:\n%s" % util.hexprint(resp)) image += resp[2:] if self.status_fn: status = chirp_common.Status() status.cur = i status.max = end status.msg = "Cloning from radio" self.status_fn(status) self._finish() return memmap.MemoryMapBytes(image) def _upload(self): """Talk to a Wouxun KG-UV8D and do a upload""" try: self._identify() self._do_upload(0, 32768, 64) except errors.RadioError: raise except Exception as e: raise errors.RadioError("Failed to communicate with radio: %s" % e) return def _do_upload(self, start, end, blocksize): ptr = start for i in range(start, end, blocksize): req = struct.pack('>H', i) chunk = self.get_mmap()[ptr:ptr + blocksize] self._write_record(CMD_WR, req + chunk) LOG.debug(util.hexprint(req + chunk)) cserr, ack = self._read_record() LOG.debug(util.hexprint(ack)) j = struct.unpack('>H', ack)[0] if cserr or j != ptr: raise Exception("Radio did not ack block %i" % ptr) ptr += blocksize if self.status_fn: status = chirp_common.Status() status.cur = i status.max = end status.msg = "Cloning to radio" self.status_fn(status) self._finish() def get_features(self): # TODO: This probably needs to be setup correctly to match the true # features of the radio rf = chirp_common.RadioFeatures() rf.has_settings = True rf.has_ctone = True rf.has_rx_dtcs = True rf.has_cross = True rf.has_tuning_step = False rf.has_bank = False rf.can_odd_split = True rf.valid_skips = ["", "S"] rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"] rf.valid_tuning_steps = STEPS rf.valid_cross_modes = [ "Tone->Tone", "Tone->DTCS", "DTCS->Tone", "DTCS->", "->Tone", "->DTCS", "DTCS->DTCS", ] rf.valid_modes = ["FM", "NFM"] rf.valid_power_levels = self.POWER_LEVELS rf.valid_name_length = 8 rf.valid_duplexes = ["", "-", "+", "split", "off"] rf.valid_bands = [(134000000, 175000000), # supports 2m (400000000, 520000000)] # supports 70cm rf.valid_characters = chirp_common.CHARSET_ASCII rf.memory_bounds = (1, 999) # 999 memories return rf @classmethod def get_prompts(cls): rp = chirp_common.RadioPrompts() rp.experimental = ("This radio driver is currently under development. " "There are no known issues with it, but you should " "proceed with caution.") return rp def get_raw_memory(self, number): return repr(self._memobj.memory[number]) def _get_tone(self, _mem, mem): def _get_dcs(val): code = int("%03o" % (val & 0x07FF)) pol = (val & 0x2000) and "R" or "N" return code, pol tpol = False if _mem.txtone != 0xFFFF and (_mem.txtone & 0x4000) == 0x4000: tcode, tpol = _get_dcs(_mem.txtone) mem.dtcs = tcode txmode = "DTCS" elif _mem.txtone != 0xFFFF and _mem.txtone != 0x0: mem.rtone = (_mem.txtone & 0x7fff) / 10.0 txmode = "Tone" else: txmode = "" _mem.txtone = 0x0 rpol = False if _mem.rxtone != 0xFFFF and (_mem.rxtone & 0x4000) == 0x4000: rcode, rpol = _get_dcs(_mem.rxtone) mem.rx_dtcs = rcode rxmode = "DTCS" elif _mem.rxtone != 0xFFFF and _mem.rxtone != 0x0: mem.ctone = (_mem.rxtone & 0x7fff) / 10.0 rxmode = "Tone" else: rxmode = "" _mem.rxtone = 0x0 if txmode == "Tone" and not rxmode: mem.tmode = "Tone" elif txmode == rxmode and txmode == "Tone" and mem.rtone == mem.ctone: mem.tmode = "TSQL" elif txmode == rxmode and txmode == "DTCS" and mem.dtcs == mem.rx_dtcs: mem.tmode = "DTCS" elif rxmode or txmode: mem.tmode = "Cross" mem.cross_mode = "%s->%s" % (txmode, rxmode) # always set it even if no dtcs is used mem.dtcs_polarity = "%s%s" % (tpol or "N", rpol or "N") LOG.debug("Got TX %s (%i) RX %s (%i)" % (txmode, _mem.txtone, rxmode, _mem.rxtone)) def get_memory(self, number): _mem = self._memobj.memory[number] _nam = self._memobj.names[number] mem = chirp_common.Memory() mem.number = number _valid = self._memobj.valid[mem.number] LOG.debug("%d %s", number, _valid == MEM_VALID) if _valid != MEM_VALID: mem.empty = True return mem else: mem.empty = False mem.freq = int(_mem.rxfreq) * 10 if _mem.txfreq == 0xFFFFFFFF: # TX freq not set mem.duplex = "off" mem.offset = 0 elif int(_mem.rxfreq) == int(_mem.txfreq): mem.duplex = "" mem.offset = 0 elif abs(int(_mem.rxfreq) * 10 - int(_mem.txfreq) * 10) > 70000000: mem.duplex = "split" mem.offset = int(_mem.txfreq) * 10 else: mem.duplex = int(_mem.rxfreq) > int(_mem.txfreq) and "-" or "+" mem.offset = abs(int(_mem.rxfreq) - int(_mem.txfreq)) * 10 for char in _nam.name: if char != 0: mem.name += chr(char) mem.name = mem.name.rstrip() self._get_tone(_mem, mem) mem.skip = "" if bool(_mem.scan_add) else "S" mem.power = self.POWER_LEVELS[_mem.power] mem.mode = _mem.iswide and "FM" or "NFM" return mem def _set_tone(self, mem, _mem): def _set_dcs(code, pol): val = int("%i" % code, 8) + 0x4000 if pol == "R": val += 0x2000 return val rx_mode = tx_mode = None rxtone = txtone = 0x0000 if mem.tmode == "Tone": tx_mode = "Tone" rx_mode = None txtone = int(mem.rtone * 10) + 0x8000 elif mem.tmode == "TSQL": rx_mode = tx_mode = "Tone" rxtone = txtone = int(mem.ctone * 10) + 0x8000 elif mem.tmode == "DTCS": tx_mode = rx_mode = "DTCS" txtone = _set_dcs(mem.dtcs, mem.dtcs_polarity[0]) rxtone = _set_dcs(mem.dtcs, mem.dtcs_polarity[1]) elif mem.tmode == "Cross": tx_mode, rx_mode = mem.cross_mode.split("->") if tx_mode == "DTCS": txtone = _set_dcs(mem.dtcs, mem.dtcs_polarity[0]) elif tx_mode == "Tone": txtone = int(mem.rtone * 10) + 0x8000 if rx_mode == "DTCS": rxtone = _set_dcs(mem.rx_dtcs, mem.dtcs_polarity[1]) elif rx_mode == "Tone": rxtone = int(mem.ctone * 10) + 0x8000 _mem.rxtone = rxtone _mem.txtone = txtone LOG.debug("Set TX %s (%i) RX %s (%i)" % (tx_mode, _mem.txtone, rx_mode, _mem.rxtone)) def set_memory(self, mem): number = mem.number _mem = self._memobj.memory[number] _nam = self._memobj.names[number] if mem.empty: _mem.set_raw("\x00" * (_mem.size() // 8)) self._memobj.valid[number] = 0 self._memobj.names[number].set_raw("\x00" * (_nam.size() // 8)) return _mem.rxfreq = int(mem.freq / 10) if mem.duplex == "off": _mem.txfreq = 0xFFFFFFFF elif mem.duplex == "split": _mem.txfreq = int(mem.offset / 10) elif mem.duplex == "off": for i in range(0, 4): _mem.txfreq[i].set_raw("\xFF") elif mem.duplex == "+": _mem.txfreq = int(mem.freq / 10) + int(mem.offset / 10) elif mem.duplex == "-": _mem.txfreq = int(mem.freq / 10) - int(mem.offset / 10) else: _mem.txfreq = int(mem.freq / 10) _mem.scan_add = int(mem.skip != "S") _mem.iswide = int(mem.mode == "FM") # set the tone self._set_tone(mem, _mem) # set the power if mem.power: _mem.power = self.POWER_LEVELS.index(mem.power) else: _mem.power = True # TODO: set the correct mute mode, for now just # set to mute mode to QT (not QT+DTMF or QT*DTMF) _mem.mute_mode = 0 for i in range(0, len(_nam.name)): if i < len(mem.name) and mem.name[i]: _nam.name[i] = ord(mem.name[i]) else: _nam.name[i] = 0x0 self._memobj.valid[mem.number] = MEM_VALID def _get_settings(self): _settings = self._memobj.settings _vfoa = self._memobj.vfoa _vfob = self._memobj.vfob cfg_grp = RadioSettingGroup("cfg_grp", "Configuration") vfoa_grp = RadioSettingGroup("vfoa_grp", "VFO A Settings") vfob_grp = RadioSettingGroup("vfob_grp", "VFO B Settings") key_grp = RadioSettingGroup("key_grp", "Key Settings") lmt_grp = RadioSettingGroup("lmt_grp", "Frequency Limits") oem_grp = RadioSettingGroup("oem_grp", "OEM Info") group = RadioSettings(cfg_grp, vfoa_grp, vfob_grp, key_grp, lmt_grp, oem_grp) # # Configuration Settings # rs = RadioSetting("channel_menu", "Menu available in channel mode", RadioSettingValueBoolean(_settings.channel_menu)) cfg_grp.append(rs) rs = RadioSetting("ponmsg", "Poweron message", RadioSettingValueList( PONMSG_LIST, PONMSG_LIST[_settings.ponmsg])) cfg_grp.append(rs) rs = RadioSetting("voice", "Voice Guide", RadioSettingValueBoolean(_settings.voice)) cfg_grp.append(rs) rs = RadioSetting("language", "Language", RadioSettingValueList(LANGUAGE_LIST, LANGUAGE_LIST[_settings. language])) cfg_grp.append(rs) rs = RadioSetting("timeout", "Timeout Timer", RadioSettingValueInteger(15, 900, _settings.timeout * 15, 15)) cfg_grp.append(rs) rs = RadioSetting("toalarm", "Timeout Alarm", RadioSettingValueInteger(0, 10, _settings.toalarm)) cfg_grp.append(rs) rs = RadioSetting("roger_beep", "Roger Beep", RadioSettingValueBoolean(_settings.roger_beep)) cfg_grp.append(rs) rs = RadioSetting("power_save", "Power save", RadioSettingValueBoolean(_settings.power_save)) cfg_grp.append(rs) rs = RadioSetting("autolock", "Autolock", RadioSettingValueBoolean(_settings.autolock)) cfg_grp.append(rs) rs = RadioSetting("keylock", "Keypad Lock", RadioSettingValueBoolean(_settings.keylock)) cfg_grp.append(rs) rs = RadioSetting("beep", "Keypad Beep", RadioSettingValueBoolean(_settings.beep)) cfg_grp.append(rs) rs = RadioSetting("stopwatch", "Stopwatch", RadioSettingValueBoolean(_settings.stopwatch)) cfg_grp.append(rs) rs = RadioSetting("backlight", "Backlight", RadioSettingValueList(BACKLIGHT_LIST, BACKLIGHT_LIST[_settings. backlight])) cfg_grp.append(rs) rs = RadioSetting("dtmf_st", "DTMF Sidetone", RadioSettingValueList(DTMFST_LIST, DTMFST_LIST[_settings. dtmf_st])) cfg_grp.append(rs) rs = RadioSetting("ani-id_sw", "ANI-ID Switch", RadioSettingValueBoolean(_settings.ani_sw)) cfg_grp.append(rs) rs = RadioSetting("ptt-id_delay", "PTT-ID Delay", RadioSettingValueList(PTTID_LIST, PTTID_LIST[_settings.ptt_id])) cfg_grp.append(rs) rs = RadioSetting("ring_time", "Ring Time", RadioSettingValueList(LIST_10, LIST_10[_settings.ring_time])) cfg_grp.append(rs) rs = RadioSetting("scan_rev", "Scan Mode", RadioSettingValueList(SCANMODE_LIST, SCANMODE_LIST[_settings. scan_rev])) cfg_grp.append(rs) rs = RadioSetting("vox", "VOX", RadioSettingValueList(LIST_10, LIST_10[_settings.vox])) cfg_grp.append(rs) rs = RadioSetting("prich_sw", "Priority Channel Switch", RadioSettingValueBoolean(_settings.prich_sw)) cfg_grp.append(rs) rs = RadioSetting("pri_ch", "Priority Channel", RadioSettingValueInteger(1, 999, _settings.pri_ch)) cfg_grp.append(rs) rs = RadioSetting("rpt_mode", "Radio Mode", RadioSettingValueList(RPTMODE_LIST, RPTMODE_LIST[_settings. rpt_mode])) cfg_grp.append(rs) rs = RadioSetting("rpt_set", "Repeater Setting", RadioSettingValueList(RPTSET_LIST, RPTSET_LIST[_settings. rpt_set])) cfg_grp.append(rs) rs = RadioSetting("rpt_spk", "Repeater Mode Speaker", RadioSettingValueBoolean(_settings.rpt_spk)) cfg_grp.append(rs) rs = RadioSetting("rpt_ptt", "Repeater PTT", RadioSettingValueBoolean(_settings.rpt_ptt)) cfg_grp.append(rs) rs = RadioSetting("dtmf_tx_time", "DTMF Tx Duration", RadioSettingValueList(DTMF_TIMES, DTMF_TIMES[_settings. dtmf_tx_time])) cfg_grp.append(rs) rs = RadioSetting("dtmf_interval", "DTMF Interval", RadioSettingValueList(DTMF_TIMES, DTMF_TIMES[_settings. dtmf_interval])) cfg_grp.append(rs) rs = RadioSetting("alert", "Alert Tone", RadioSettingValueList(ALERTS_LIST, ALERTS_LIST[_settings.alert])) cfg_grp.append(rs) rs = RadioSetting("rpt_tone", "Repeater Tone", RadioSettingValueBoolean(_settings.rpt_tone)) cfg_grp.append(rs) rs = RadioSetting("rpt_hold", "Repeater Hold Time", RadioSettingValueList(HOLD_TIMES, HOLD_TIMES[_settings. rpt_hold])) cfg_grp.append(rs) rs = RadioSetting("scan_det", "Scan DET", RadioSettingValueBoolean(_settings.scan_det)) cfg_grp.append(rs) rs = RadioSetting("sc_qt", "SC-QT", RadioSettingValueList(SCQT_LIST, SCQT_LIST[_settings.smuteset])) cfg_grp.append(rs) rs = RadioSetting("smuteset", "SubFreq Mute", RadioSettingValueList(SMUTESET_LIST, SMUTESET_LIST[_settings. smuteset])) cfg_grp.append(rs) _pwd = "".join(map(chr, _settings.mode_sw_pwd)) val = RadioSettingValueString(0, 6, _pwd) val.set_mutable(True) rs = RadioSetting("mode_sw_pwd", "Mode Switch Password", val) cfg_grp.append(rs) _pwd = "".join(map(chr, _settings.reset_pwd)) val = RadioSettingValueString(0, 6, _pwd) val.set_mutable(True) rs = RadioSetting("reset_pwd", "Reset Password", val) cfg_grp.append(rs) # # VFO A Settings # rs = RadioSetting("vfoa_mode", "VFO A Workmode", RadioSettingValueList(WORKMODE_LIST, WORKMODE_LIST[_settings. workmode_a])) vfoa_grp.append(rs) rs = RadioSetting("vfoa_chan", "VFO A Channel", RadioSettingValueInteger(1, 999, _settings.work_cha)) vfoa_grp.append(rs) rs = RadioSetting("rxfreqa", "VFO A Rx Frequency", RadioSettingValueInteger( 134000000, 520000000, _vfoa.rxfreq * 10, 5000)) vfoa_grp.append(rs) rs = RadioSetting("txoffa", "VFO A Tx Offset", RadioSettingValueInteger( 0, 520000000, _vfoa.txoffset * 10, 5000)) vfoa_grp.append(rs) # u16 rxtone; # u16 txtone; rs = RadioSetting("vfoa_power", "VFO A Power", RadioSettingValueList( POWER_LIST, POWER_LIST[_vfoa.power])) vfoa_grp.append(rs) # shift_dir:2 rs = RadioSetting("vfoa_iswide", "VFO A NBFM", RadioSettingValueList( BANDWIDTH_LIST, BANDWIDTH_LIST[_vfoa.iswide])) vfoa_grp.append(rs) rs = RadioSetting("vfoa_mute_mode", "VFO A Mute", RadioSettingValueList( SPMUTE_LIST, SPMUTE_LIST[_vfoa.mute_mode])) vfoa_grp.append(rs) rs = RadioSetting("vfoa_step", "VFO A Step (kHz)", RadioSettingValueList( STEP_LIST, STEP_LIST[_vfoa.step])) vfoa_grp.append(rs) rs = RadioSetting("vfoa_squelch", "VFO A Squelch", RadioSettingValueList( LIST_10, LIST_10[_vfoa.squelch])) vfoa_grp.append(rs) rs = RadioSetting("bcl_a", "Busy Channel Lock-out A", RadioSettingValueBoolean(_settings.bcl_a)) vfoa_grp.append(rs) # # VFO B Settings # rs = RadioSetting("vfob_mode", "VFO B Workmode", RadioSettingValueList( WORKMODE_LIST, WORKMODE_LIST[_settings.workmode_b])) vfob_grp.append(rs) rs = RadioSetting("vfob_chan", "VFO B Channel", RadioSettingValueInteger(1, 999, _settings.work_chb)) vfob_grp.append(rs) rs = RadioSetting("rxfreqb", "VFO B Rx Frequency", RadioSettingValueInteger( 134000000, 520000000, _vfob.rxfreq * 10, 5000)) vfob_grp.append(rs) rs = RadioSetting("txoffb", "VFO B Tx Offset", RadioSettingValueInteger( 0, 520000000, _vfob.txoffset * 10, 5000)) vfob_grp.append(rs) # u16 rxtone; # u16 txtone; rs = RadioSetting("vfob_power", "VFO B Power", RadioSettingValueList( POWER_LIST, POWER_LIST[_vfob.power])) vfob_grp.append(rs) # shift_dir:2 rs = RadioSetting("vfob_iswide", "VFO B NBFM", RadioSettingValueList( BANDWIDTH_LIST, BANDWIDTH_LIST[_vfob.iswide])) vfob_grp.append(rs) rs = RadioSetting("vfob_mute_mode", "VFO B Mute", RadioSettingValueList( SPMUTE_LIST, SPMUTE_LIST[_vfob.mute_mode])) vfob_grp.append(rs) rs = RadioSetting("vfob_step", "VFO B Step (kHz)", RadioSettingValueList( STEP_LIST, STEP_LIST[_vfob.step])) vfob_grp.append(rs) rs = RadioSetting("vfob_squelch", "VFO B Squelch", RadioSettingValueList( LIST_10, LIST_10[_vfob.squelch])) vfob_grp.append(rs) rs = RadioSetting("bcl_b", "Busy Channel Lock-out B", RadioSettingValueBoolean(_settings.bcl_b)) vfob_grp.append(rs) # # Key Settings # _msg = str(_settings.dispstr).split("\0")[0] val = RadioSettingValueString(0, 15, _msg) val.set_mutable(True) rs = RadioSetting("dispstr", "Display Message", val) key_grp.append(rs) _ani = "" for i in _settings.ani: if i < 10: _ani += chr(i + 0x30) else: break val = RadioSettingValueString(0, 6, _ani) val.set_mutable(True) rs = RadioSetting("ani", "ANI code", val) key_grp.append(rs) rs = RadioSetting("pf1_func", "PF1 Key function", RadioSettingValueList( PF1KEY_LIST, PF1KEY_LIST[self._memobj.settings.pf1_func])) key_grp.append(rs) rs = RadioSetting("pf3_func", "PF3 Key function", RadioSettingValueList( PF3KEY_LIST, PF3KEY_LIST[self._memobj.settings.pf3_func])) key_grp.append(rs) # # Scan Group Settings # # settings: # u8 scg_a; # u8 scg_b; # # struct { # u16 lower; # u16 upper; # } scan_groups[10]; # # Call group settings # # # Limits settings # rs = RadioSetting("urx_start", "UHF RX Lower Limit", RadioSettingValueInteger( 400000000, 520000000, self._memobj.uhf_limits.rx_start * 10, 5000)) lmt_grp.append(rs) rs = RadioSetting("urx_stop", "UHF RX Upper Limit", RadioSettingValueInteger( 400000000, 520000000, self._memobj.uhf_limits.rx_stop * 10, 5000)) lmt_grp.append(rs) rs = RadioSetting("utx_start", "UHF TX Lower Limit", RadioSettingValueInteger( 400000000, 520000000, self._memobj.uhf_limits.tx_start * 10, 5000)) lmt_grp.append(rs) rs = RadioSetting("utx_stop", "UHF TX Upper Limit", RadioSettingValueInteger( 400000000, 520000000, self._memobj.uhf_limits.tx_stop * 10, 5000)) lmt_grp.append(rs) rs = RadioSetting("vrx_start", "VHF RX Lower Limit", RadioSettingValueInteger( 134000000, 174997500, self._memobj.vhf_limits.rx_start * 10, 5000)) lmt_grp.append(rs) rs = RadioSetting("vrx_stop", "VHF RX Upper Limit", RadioSettingValueInteger( 134000000, 174997500, self._memobj.vhf_limits.rx_stop * 10, 5000)) lmt_grp.append(rs) rs = RadioSetting("vtx_start", "VHF TX Lower Limit", RadioSettingValueInteger( 134000000, 174997500, self._memobj.vhf_limits.tx_start * 10, 5000)) lmt_grp.append(rs) rs = RadioSetting("vtx_stop", "VHF TX Upper Limit", RadioSettingValueInteger( 134000000, 174997500, self._memobj.vhf_limits.tx_stop * 10, 5000)) lmt_grp.append(rs) # # OEM info # def _decode(lst): _str = ''.join([chr(c) for c in lst if chr(c) in chirp_common.CHARSET_ASCII]) return _str _str = _decode(self._memobj.oem_info.model) val = RadioSettingValueString(0, 15, _str) val.set_mutable(False) rs = RadioSetting("model", "Model", val) oem_grp.append(rs) _str = _decode(self._memobj.oem_info.oem1) val = RadioSettingValueString(0, 15, _str) val.set_mutable(False) rs = RadioSetting("oem1", "OEM String 1", val) oem_grp.append(rs) _str = _decode(self._memobj.oem_info.oem2) val = RadioSettingValueString(0, 15, _str) val.set_mutable(False) rs = RadioSetting("oem2", "OEM String 2", val) oem_grp.append(rs) _str = _decode(self._memobj.oem_info.version) val = RadioSettingValueString(0, 15, _str) val.set_mutable(False) rs = RadioSetting("version", "Software Version", val) oem_grp.append(rs) _str = _decode(self._memobj.oem_info.date) val = RadioSettingValueString(0, 15, _str) val.set_mutable(False) rs = RadioSetting("date", "OEM Date", val) oem_grp.append(rs) return group def get_settings(self): try: return self._get_settings() except Exception: import traceback LOG.error("Failed to parse settings: %s", traceback.format_exc()) return None