Number	Title		Options				Description
1	Tone Mode	Off, Tx, Rx, Tx+Rx	
2	Tone Sel	62.5 thru 254.1			Off if "Tone Mode" = Off and no selections are available.
3	Repeater	Off, +, -	
4	Squelch		1, 2, 3, 4, 5, 6, 7, 8, 9	
5	Dual Rx		Off, On	
6	Lamp Mode	Auto, Off, On	
7	Brightness	1, 2, 3, 4, 5, 6, 7	
8	Beep		Off, On	
9	Power		Low, High, Medium	
10	Battery						7.7 VDC	No option, shows battery voltage
11	Vox		Off, On	
12	Vox Level	1, 2, 3, 4, 5, 6, 7	
13	Scan Mode	Carrier, Stop, Time	
14	Scan						If selected, starts scanning VFO in VFO  modes, channels in channel mode
15	Tx Block	Off, Busy	
16	Offset		0.60000				Seems like it's only visible in VFO Mode, in Channel Mode, menu skips 15-17
							0.60000 default, adjustable in .0250 increments."
17	Welcome		Off, DC, Message	
18	Rx Sleep	Off 1;1 1;2 1;4	
19	Time Out	Off, 30, 60, 90, 120, 150, 
			180, 210, 240, 270	

20	Step		2.5k,  5k, 6.25k, 10k, 12.5k,
			 25k, 50k, 100k 		Only available in VFO Mode

21	Nar/Wide	Narrow, Wide, Medium	
22	Tone Scan	scans tones when selected
23	Lock Mode	Key, Key + S, All, PTT	
24	Disp Mode	Frequency, Channel, Name	
25	Dual Watch	Off, On	
26	Reset		All, Full, VFO	
27	Firmware	MCU B1.66			No selections, shows firmware version