# Copyright 2015 David Fannin KK6DF # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . import os import struct import time import logging from chirp import bitwise from chirp import chirp_common from chirp import directory from chirp import errors from chirp import memmap from chirp import util from chirp.settings import RadioSettingGroup, RadioSetting, RadioSettings, \ RadioSettingValueList, RadioSettingValueString, RadioSettingValueBoolean, \ RadioSettingValueInteger, RadioSettingValueString, \ RadioSettingValueFloat, InvalidValueError LOG = logging.getLogger(__name__) # # Chirp Driver for TYT TH-9000D (models: 2M (144 Mhz), 1.25M (220 Mhz) and 70cm (440 Mhz) radios) # # Version 1.0 # # - Skip channels # # Global Parameters # MMAPSIZE = 16384 TONES = [62.5] + list(chirp_common.TONES) TMODES = ['','Tone','DTCS',''] DUPLEXES = ['','err','-','+'] # index 2 not used MODES = ['WFM','FM','NFM'] # 25k, 20k,15k bw TUNING_STEPS=[ 5.0, 6.25, 8.33, 10.0, 12.5, 15.0, 20.0, 25.0, 30.0, 50.0 ] # index 0-9 POWER_LEVELS=[chirp_common.PowerLevel("High", watts=65), chirp_common.PowerLevel("Mid", watts=25), chirp_common.PowerLevel("Low", watts=10)] CROSS_MODES = chirp_common.CROSS_MODES APO_LIST = [ "Off","30 min","1 hr","2 hrs" ] BGCOLOR_LIST = ["Blue","Orange","Purple"] BGBRIGHT_LIST = ["%s" % x for x in range(1,32)] SQUELCH_LIST = ["Off"] + ["Level %s" % x for x in range(1,20)] TIMEOUT_LIST = ["Off"] + ["%s min" % x for x in range(1,30)] TXPWR_LIST = ["60W","25W"] # maximum power for Hi setting TBSTFREQ_LIST = ["1750Hz","2100Hz","1000Hz","1450Hz"] BEEP_LIST = ["Off","On"] SETTING_LISTS = { "auto_power_off": APO_LIST, "bg_color" : BGCOLOR_LIST, "bg_brightness" : BGBRIGHT_LIST, "squelch" : SQUELCH_LIST, "timeout_timer" : TIMEOUT_LIST, "choose_tx_power": TXPWR_LIST, "tbst_freq" : TBSTFREQ_LIST, "voice_prompt" : BEEP_LIST } MEM_FORMAT = """ #seekto 0x0000; struct { u8 unknown0000[16]; char idhdr[16]; u8 unknown0001[16]; } fidhdr; """ #Overall Memory Map: # # Memory Map (Range 0x0100-3FF0, step 0x10): # # Field Start End Size # (hex) (hex) (hex) # # 1 Channel Set Flag 0100 011F 20 # 2 Channel Skip Flag 0120 013F 20 # 3 Blank/Unknown 0140 01EF B0 # 4 Unknown 01F0 01FF 10 # 5 TX/RX Range 0200 020F 10 # 6 Bootup Passwd 0210 021F 10 # 7 Options, Radio 0220 023F 20 # 8 Unknown 0240 019F # 8B Startup Label 03E0 03E7 07 # 9 Channel Bank 2000 38FF 1900 # Channel 000 2000 201F 20 # Channel 001 2020 202F 20 # ... # Channel 199 38E0 38FF 20 # 10 Blank/Unknown 3900 3FFF 6FF 14592 16383 1792 # Total Map Size 16128 (2^8 = 16384) # # TH9000/220 memory map # section: 1 and 2: Channel Set/Skip Flags # # Channel Set (starts 0x100) : Channel Set bit is value 0 if a memory location in the channel bank is active. # Channel Skip (starts 0x120): Channel Skip bit is value 0 if a memory location in the channel bank is active. # # Both flag maps are a total 24 bytes in length, aligned on 32 byte records. # bit = 0 channel set/no skip, 1 is channel not set/skip # # to index a channel: # cbyte = channel / 8 ; # cbit = channel % 8 ; # setflag = csetflag[cbyte].c[cbit] ; # skipflag = cskipflag[cbyte].c[cbit] ; # # channel range is 0-199, range is 32 bytes (last 7 unknown) # MEM_FORMAT = MEM_FORMAT + """ #seekto 0x0100; struct { bit c[8]; } csetflag[32]; struct { u8 unknown0100[7]; } ropt0100; #seekto 0x0120; struct { bit c[8]; } cskipflag[32]; struct { u8 unknown0120[7]; } ropt0120; """ # TH9000 memory map # section: 5 TX/RX Range # used to set the TX/RX range of the radio (e.g. 222-228Mhz for 220 meter) # possible to set range for tx/rx # MEM_FORMAT = MEM_FORMAT + """ #seekto 0x0200; struct { bbcd txrangelow[4]; bbcd txrangehi[4]; bbcd rxrangelow[4]; bbcd rxrangehi[4]; } freqrange; """ # TH9000 memory map # section: 6 bootup_passwd # used to set bootup passwd (see boot_passwd checkbox option) # # options - bootup password # # bytes:bit type description # --------------------------------------------------------------------------- # 6 u8 bootup_passwd[6] bootup passwd, 6 chars, numberic chars 30-39 , see boot_passwd checkbox to set # 10 u8 unknown; # MEM_FORMAT = MEM_FORMAT + """ #seekto 0x0210; struct { u8 bootup_passwd[6]; u8 unknown2010[10]; } ropt0210; """ # TH9000/220 memory map # section: 7 Radio Options # used to set a number of radio options # # bytes:bit type description # --------------------------------------------------------------------------- # 1 u8 display_mode display mode, range 0-2, 0=freq,1=channel,2=name (selecting name affects vfo_mr) # 1 u8 vfo_mr; vfo_mr , 0=vfo, mr=1 # 1 u8 unknown; # 1 u8 squelch; squelch level, range 0-19, hex for menu # 1 u8 unknown[2]; # 1 u8 channel_lock; if display_mode[channel] selected, then lock=1,no lock =0 # 1 u8 unknown; # 1 u8 bg_brightness ; background brightness, range 0-21, hex, menu index # 1 u8 unknown; # 1 u8 bg_color ; bg color, menu index, blue 0 , orange 1, purple 2 # 1 u8 tbst_freq ; tbst freq , menu 0 = 1750Hz, 1=2100 , 2=1000 , 3=1450hz # 1 u8 timeout_timer; timeout timer, hex, value = minutes, 0= no timeout # 1 u8 unknown; # 1 u8 auto_power_off; auto power off, range 0-3, off,30min, 1hr, 2hr, hex menu index # 1 u8 voice_prompt; voice prompt, value 0,1 , Beep ON = 1, Beep Off = 2 # # description of function setup options, starting at 0x0230 # # bytes:bit type description # --------------------------------------------------------------------------- # 1 u8 // 0 # :4 unknown:6 # :1 elim_sql_tail:1 eliminate squelsh tail when no ctcss checkbox (1=checked) # :1 sql_key_function "squelch off" 1 , "squelch momentary off" 0 , menu index # 2 u8 unknown[2] /1-2 # 1 u8 // 3 # :4 unknown:4 # :1 inhibit_init_ops:1 //bit 5 # :1 unknownD:1 # :1 inhibit_setup_bg_chk:1 //bit 7 # :1 unknown:1 # 1 u8 tail_elim_type menu , (off=0,120=1,180=2), // 4 # 1 u8 choose_tx_power menu , (60w=0,25w=1) // 5 # 2 u8 unknown[2]; // 6-7 # 1 u8 bootup_passwd_flag checkbox 1=on, 0=off // 8 # 7 u8 unknown[7]; // 9-F # MEM_FORMAT = MEM_FORMAT + """ #seekto 0x0220; struct { u8 display_mode; u8 vfo_mr; u8 unknown0220A; u8 squelch; u8 unknown0220B[2]; u8 channel_lock; u8 unknown0220C; u8 bg_brightness; u8 unknown0220D; u8 bg_color; u8 tbst_freq; u8 timeout_timer; u8 unknown0220E; u8 auto_power_off; u8 voice_prompt; u8 unknown0230A:6, elim_sql_tail:1, sql_key_function:1; u8 unknown0230B[2]; u8 unknown0230C:4, inhibit_init_ops:1, unknown0230D:1, inhibit_setup_bg_chk:1, unknown0230E:1; u8 tail_elim_type; u8 choose_tx_power; u8 unknown0230F[2]; u8 bootup_passwd_flag; u8 unknown0230G[7]; } settings; """ # TH9000 memory map # section: 8B Startup Label # # bytes:bit type description # --------------------------------------------------------------------------- # 7 char start_label[7] label displayed at startup (usually your call sign) # MEM_FORMAT = MEM_FORMAT + """ #seekto 0x03E0; struct { char startname[7]; } slabel; """ # TH9000/220 memory map # section: 9 Channel Bank # description of channel bank (200 channels , range 0-199) # Each 32 Byte (0x20 hex) record: # bytes:bit type description # --------------------------------------------------------------------------- # 4 bbcd freq[4] receive frequency in packed binary coded decimal # 4 bbcd offset[4] transmit offset in packed binary coded decimal (note: plus/minus direction set by 'duplex' field) # 1 u8 # :4 unknown:4 # :4 tuning_step:4 tuning step, menu index value from 0-9 # 5,6.25,8.33,10,12.5,15,20,25,30,50 # 1 u8 # :4 unknown:4 not yet decoded, used for DCS coding? # :2 channel_width:2 channel spacing, menu index value from 0-3 # 25,20,12.5 # :1 reverse:1 reverse flag, 0=off, 1=on (reverses tx and rx freqs) # :1 txoff:1 transmitt off flag, 0=transmit , 1=do not transmit # 1 u8 # :1 talkaround:1 talkaround flag, 0=off, 1=on (bypasses repeater) # :1 compander:1 compander flag, 0=off, 1=on (turns on/off voice compander option) # :2 unknown:2 # :2 power:2 tx power setting, value range 0-2, 0=hi,1=med,2=lo # :2 duplex:2 duplex settings, 0=simplex,2= minus(-) offset, 3= plus (+) offset (see offset field) # # 1 u8 # :4 unknown:4 # :2 rxtmode:2 rx tone mode, value range 0-2, 0=none, 1=CTCSS, 2=DCS (ctcss tone in field rxtone) # :2 txtmode:2 tx tone mode, value range 0-2, 0=none, 1=CTCSS, 3=DCS (ctcss tone in field txtone) # 1 u8 # :2 unknown:2 # :6 txtone:6 tx ctcss tone, menu index # 1 u8 # :2 unknown:2 # :6 rxtone:6 rx ctcss tone, menu index # 1 u8 txcode ?, not used for ctcss # 1 u8 rxcode ?, not used for ctcss # 3 u8 unknown[3] # 7 char name[7] 7 byte char string for channel name # 1 u8 # :6 unknown:6, # :2 busychannellockout:2 busy channel lockout option , 0=off, 1=repeater, 2=busy (lock out tx if channel busy) # 4 u8 unknownI[4]; # 1 u8 # :7 unknown:7 # :1 scrambler:1 scrambler flag, 0=off, 1=on (turns on tyt scrambler option) # MEM_FORMAT = MEM_FORMAT + """ #seekto 0x2000; struct { bbcd freq[4]; bbcd offset[4]; u8 unknown2000A:4, tuning_step:4; u8 rxdcsextra:1, txdcsextra:1, rxinv:1, txinv:1, channel_width:2, reverse:1, txoff:1; u8 talkaround:1, compander:1, unknown2000C:2, power:2, duplex:2; u8 unknown2000D:4, rxtmode:2, txtmode:2; u8 unknown2000E:2, txtone:6; u8 unknown2000F:2, rxtone:6; u8 txcode; u8 rxcode; u8 unknown2000G[3]; char name[7]; u8 unknown2000H:6, busychannellockout:2; u8 unknown2000I[4]; u8 unknown2000J:7, scrambler:1; } memory[200] ; """ def _echo_write(radio, data): try: radio.pipe.write(data) radio.pipe.read(len(data)) except Exception, e: LOG.error("Error writing to radio: %s" % e) raise errors.RadioError("Unable to write to radio") def _checksum(data): cs = 0 for byte in data: cs += ord(byte) return cs % 256 def _read(radio, length): try: data = radio.pipe.read(length) except Exception, e: LOG.error( "Error reading from radio: %s" % e) raise errors.RadioError("Unable to read from radio") if len(data) != length: LOG.error( "Short read from radio (%i, expected %i)" % (len(data), length)) LOG.debug(util.hexprint(data)) raise errors.RadioError("Short read from radio") return data def _ident(radio): radio.pipe.timeout = 1 _echo_write(radio,"PROGRAM") response = radio.pipe.read(3) if response != "QX\06": LOG.debug( "Response was :\n%s" % util.hexprint(response)) raise errors.RadioError("Unsupported model") _echo_write(radio, "\x02") response = radio.pipe.read(16) LOG.debug(util.hexprint(response)) if response[1:8] != "TH-9000": LOG.error( "Looking for:\n%s" % util.hexprint("TH-9000")) LOG.error( "Response was:\n%s" % util.hexprint(response)) raise errors.RadioError("Unsupported model") def _send(radio, cmd, addr, length, data=None): frame = struct.pack(">cHb", cmd, addr, length) if data: frame += data frame += chr(_checksum(frame[1:])) frame += "\x06" _echo_write(radio, frame) LOG.debug("Sent:\n%s" % util.hexprint(frame)) if data: result = radio.pipe.read(1) if result != "\x06": LOG.debug( "Ack was: %s" % repr(result)) raise errors.RadioError("Radio did not accept block at %04x" % addr) return result = _read(radio, length + 6) LOG.debug("Got:\n%s" % util.hexprint(result)) header = result[0:4] data = result[4:-2] ack = result[-1] if ack != "\x06": LOG.debug("Ack was: %s" % repr(ack)) raise errors.RadioError("Radio NAK'd block at %04x" % addr) _cmd, _addr, _length = struct.unpack(">cHb", header) if _addr != addr or _length != _length: LOG.debug( "Expected/Received:") LOG.debug(" Length: %02x/%02x" % (length, _length)) LOG.debug( " Addr: %04x/%04x" % (addr, _addr)) raise errors.RadioError("Radio send unexpected block") cs = _checksum(result[1:-2]) if cs != ord(result[-2]): LOG.debug( "Calculated: %02x" % cs) LOG.debug( "Actual: %02x" % ord(result[-2])) raise errors.RadioError("Block at 0x%04x failed checksum" % addr) return data def _finish(radio): endframe = "\x45\x4E\x44" _echo_write(radio, endframe) result = radio.pipe.read(1) # TYT radios acknowledge the "endframe" command, Luiton radios do not. if result != "" and result != "\x06": LOG.error( "Got:\n%s" % util.hexprint(result)) raise errors.RadioError("Radio did not finish cleanly") def do_download(radio): _ident(radio) _memobj = None data = "" for start,end in radio._ranges: for addr in range(start,end,0x10): block = _send(radio,'R',addr,0x10) data += block status = chirp_common.Status() status.cur = len(data) status.max = end status.msg = "Downloading from radio" radio.status_fn(status) _finish(radio) return memmap.MemoryMap(data) def do_upload(radio): _ident(radio) for start,end in radio._ranges: for addr in range(start,end,0x10): if addr < 0x0100: continue block = radio._mmap[addr:addr+0x10] _send(radio,'W',addr,len(block),block) status = chirp_common.Status() status.cur = addr status.max = end status.msg = "Uploading to Radio" radio.status_fn(status) _finish(radio) # # The base class, extended for use with other models # class Th9000Radio(chirp_common.CloneModeRadio, chirp_common.ExperimentalRadio): """TYT TH-9000""" VENDOR = "TYT" MODEL = "TH9000 Base" BAUD_RATE = 9600 valid_freq = [(900000000, 999000000)] _memsize = MMAPSIZE _ranges = [(0x0000,0x4000)] @classmethod def get_prompts(cls): rp = chirp_common.RadioPrompts() rp.experimental = ("The TYT TH-9000 driver is an beta version." "Proceed with Caution and backup your data") return rp def get_features(self): rf = chirp_common.RadioFeatures() rf.has_settings = True rf.has_bank = False rf.has_cross = True rf.has_tuning_step = False rf.has_rx_dtcs = True rf.valid_skips = ["","S"] rf.memory_bounds = (0, 199) rf.valid_name_length = 7 rf.valid_characters = chirp_common.CHARSET_UPPER_NUMERIC + "-" rf.valid_modes = MODES rf.valid_tmodes = ['','Tone','TSQL','DTCS','Cross'] rf.valid_cross_modes = ['Tone->DTCS','DTCS->Tone', '->Tone','->DTCS','Tone->Tone'] rf.valid_power_levels = POWER_LEVELS rf.valid_dtcs_codes = chirp_common.ALL_DTCS_CODES rf.valid_bands = self.valid_freq return rf # Do a download of the radio from the serial port def sync_in(self): self._mmap = do_download(self) self.process_mmap() # Do an upload of the radio to the serial port def sync_out(self): do_upload(self) def process_mmap(self): self._memobj = bitwise.parse(MEM_FORMAT, self._mmap) # Return a raw representation of the memory object, which # is very helpful for development def get_raw_memory(self, number): return repr(self._memobj.memory[number]) # not working yet def _get_dcs_index(self, _mem,which): base = getattr(_mem, '%scode' % which) extra = getattr(_mem, '%sdcsextra' % which) return (int(extra) << 8) | int(base) def _set_dcs_index(self, _mem, which, index): base = getattr(_mem, '%scode' % which) extra = getattr(_mem, '%sdcsextra' % which) base.set_value(index & 0xFF) extra.set_value(index >> 8) # Extract a high-level memory object from the low-level memory map # This is called to populate a memory in the UI def get_memory(self, number): # Get a low-level memory object mapped to the image _mem = self._memobj.memory[number] # get flag info cbyte = number / 8 ; cbit = 7 - (number % 8) ; setflag = self._memobj.csetflag[cbyte].c[cbit]; skipflag = self._memobj.cskipflag[cbyte].c[cbit]; mem = chirp_common.Memory() mem.number = number # Set the memory number if setflag == 1: mem.empty = True return mem mem.freq = int(_mem.freq) * 100 mem.offset = int(_mem.offset) * 100 mem.name = str(_mem.name).rstrip() # Set the alpha tag mem.duplex = DUPLEXES[_mem.duplex] mem.mode = MODES[_mem.channel_width] mem.power = POWER_LEVELS[_mem.power] rxtone = txtone = None rxmode = TMODES[_mem.rxtmode] txmode = TMODES[_mem.txtmode] # doesn't work if rxmode == "Tone": rxtone = TONES[_mem.rxtone] elif rxmode == "DTCS": rxtone = chirp_common.ALL_DTCS_CODES[self._get_dcs_index(_mem,'rx')] if txmode == "Tone": txtone = TONES[_mem.txtone] elif txmode == "DTCS": txtone = chirp_common.ALL_DTCS_CODES[self._get_dcs_index(_mem,'tx')] rxpol = _mem.rxinv and "R" or "N" txpol = _mem.txinv and "R" or "N" chirp_common.split_tone_decode(mem, (txmode, txtone, txpol), (rxmode, rxtone, rxpol)) mem.skip = "S" if skipflag == 1 else "" # We'll consider any blank (i.e. 0MHz frequency) to be empty if mem.freq == 0: mem.empty = True return mem # Store details about a high-level memory to the memory map # This is called when a user edits a memory in the UI def set_memory(self, mem): # Get a low-level memory object mapped to the image _mem = self._memobj.memory[mem.number] cbyte = mem.number / 8 cbit = 7 - (mem.number % 8) if mem.empty: self._memobj.csetflag[cbyte].c[cbit] = 1 self._memobj.cskipflag[cbyte].c[cbit] = 1 return self._memobj.csetflag[cbyte].c[cbit] = 0 self._memobj.cskipflag[cbyte].c[cbit] = 1 if (mem.skip == "S") else 0 _mem.set_raw("\x00" * 32) _mem.freq = mem.freq / 100 # Convert to low-level frequency _mem.offset = mem.offset / 100 # Convert to low-level frequency _mem.name = mem.name.ljust(7)[:7] # Store the alpha tag _mem.duplex = DUPLEXES.index(mem.duplex) try: _mem.channel_width = MODES.index(mem.mode) except ValueError: _mem.channel_width = 0 ((txmode, txtone, txpol), (rxmode, rxtone, rxpol)) = chirp_common.split_tone_encode(mem) _mem.txtmode = TMODES.index(txmode) _mem.rxtmode = TMODES.index(rxmode) if txmode == "Tone": _mem.txtone = TONES.index(txtone) elif txmode == "DTCS": self._set_dcs_index(_mem,'tx',chirp_common.ALL_DTCS_CODES.index(txtone)) if rxmode == "Tone": _mem.rxtone = TONES.index(rxtone) elif rxmode == "DTCS": self._set_dcs_index(_mem, 'rx', chirp_common.ALL_DTCS_CODES.index(rxtone)) _mem.txinv = txpol == "R" _mem.rxinv = rxpol == "R" if mem.power: _mem.power = POWER_LEVELS.index(mem.power) else: _mem.power = 0 def _get_settings(self): _settings = self._memobj.settings _freqrange = self._memobj.freqrange _slabel = self._memobj.slabel basic = RadioSettingGroup("basic","Global Settings") freqrange = RadioSettingGroup("freqrange","Frequency Ranges") top = RadioSettingGroup("top","All Settings",basic,freqrange) settings = RadioSettings(top) def _filter(name): filtered = "" for char in str(name): if char in chirp_common.CHARSET_ASCII: filtered += char else: filtered += "" return filtered val = RadioSettingValueString(0,7,_filter(_slabel.startname)) rs = RadioSetting("startname","Startup Label",val) basic.append(rs) rs = RadioSetting("bg_color","LCD Color", RadioSettingValueList(BGCOLOR_LIST, BGCOLOR_LIST[_settings.bg_color])) basic.append(rs) rs = RadioSetting("bg_brightness","LCD Brightness", RadioSettingValueList(BGBRIGHT_LIST, BGBRIGHT_LIST[_settings.bg_brightness])) basic.append(rs) rs = RadioSetting("squelch","Squelch Level", RadioSettingValueList(SQUELCH_LIST, SQUELCH_LIST[_settings.squelch])) basic.append(rs) rs = RadioSetting("timeout_timer","Timeout Timer (TOT)", RadioSettingValueList(TIMEOUT_LIST, TIMEOUT_LIST[_settings.timeout_timer])) basic.append(rs) rs = RadioSetting("auto_power_off","Auto Power Off (APO)", RadioSettingValueList(APO_LIST, APO_LIST[_settings.auto_power_off])) basic.append(rs) rs = RadioSetting("voice_prompt","Beep Prompt", RadioSettingValueList(BEEP_LIST, BEEP_LIST[_settings.voice_prompt])) basic.append(rs) rs = RadioSetting("tbst_freq","Tone Burst Frequency", RadioSettingValueList(TBSTFREQ_LIST, TBSTFREQ_LIST[_settings.tbst_freq])) basic.append(rs) rs = RadioSetting("choose_tx_power","Max Level of TX Power", RadioSettingValueList(TXPWR_LIST, TXPWR_LIST[_settings.choose_tx_power])) basic.append(rs) (flow,fhigh) = self.valid_freq[0] flow /= 1000 fhigh /= 1000 fmidrange = (fhigh- flow)/2 rs = RadioSetting("txrangelow","TX Freq, Lower Limit (khz)", RadioSettingValueInteger(flow, flow + fmidrange, int(_freqrange.txrangelow)/10)) freqrange.append(rs) rs = RadioSetting("txrangehi","TX Freq, Upper Limit (khz)", RadioSettingValueInteger(fhigh-fmidrange, fhigh, int(_freqrange.txrangehi)/10)) freqrange.append(rs) rs = RadioSetting("rxrangelow","RX Freq, Lower Limit (khz)", RadioSettingValueInteger(flow, flow+fmidrange, int(_freqrange.rxrangelow)/10)) freqrange.append(rs) rs = RadioSetting("rxrangehi","RX Freq, Upper Limit (khz)", RadioSettingValueInteger(fhigh-fmidrange, fhigh, int(_freqrange.rxrangehi)/10)) freqrange.append(rs) return settings def get_settings(self): try: return self._get_settings() except: import traceback LOG.error( "failed to parse settings") traceback.print_exc() return None def set_settings(self,settings): _settings = self._memobj.settings for element in settings: if not isinstance(element,RadioSetting): self.set_settings(element) continue else: try: name = element.get_name() if name in ["txrangelow","txrangehi","rxrangelow","rxrangehi"]: LOG.debug( "setting %s = %s" % (name,int(element.value)*10)) setattr(self._memobj.freqrange,name,int(element.value)*10) continue if name in ["startname"]: LOG.debug( "setting %s = %s" % (name, element.value)) setattr(self._memobj.slabel,name,element.value) continue obj = _settings setting = element.get_name() if element.has_apply_callback(): LOG.debug( "using apply callback") element.run_apply_callback() else: LOG.debug( "Setting %s = %s" % (setting, element.value)) setattr(obj, setting, element.value) except Exception, e: LOG.debug( element.get_name()) raise @classmethod def match_model(cls, filedata, filename): if MMAPSIZE == len(filedata): (flow,fhigh) = cls.valid_freq[0] flow /= 1000000 fhigh /= 1000000 txmin=ord(filedata[0x200])*100 + (ord(filedata[0x201])>>4)*10 + ord(filedata[0x201])%16 txmax=ord(filedata[0x204])*100 + (ord(filedata[0x205])>>4)*10 + ord(filedata[0x205])%16 rxmin=ord(filedata[0x208])*100 + (ord(filedata[0x209])>>4)*10 + ord(filedata[0x209])%16 rxmax=ord(filedata[0x20C])*100 + (ord(filedata[0x20D])>>4)*10 + ord(filedata[0x20D])%16 if ( rxmin >= flow and rxmax <= fhigh and txmin >= flow and txmax <= fhigh ): return True return False # Declaring Aliases (Clones of the real radios) class LT580VHF(chirp_common.Alias): VENDOR = "LUITON" MODEL = "LT-580_VHF" class LT580UHF(chirp_common.Alias): VENDOR = "LUITON" MODEL = "LT-580_UHF" class AT588220(chirp_common.Alias): VENDOR = "Anytone" MODEL = "AT-588_220" @directory.register class Th9000220Radio(Th9000Radio): """TYT TH-9000 220""" VENDOR = "TYT" MODEL = "TH9000_220" BAUD_RATE = 9600 valid_freq = [(220000000, 260000000)] ALIASES = [AT588220, ] @directory.register class Th9000144Radio(Th9000220Radio): """TYT TH-9000 144""" VENDOR = "TYT" MODEL = "TH9000_144" BAUD_RATE = 9600 valid_freq = [(136000000, 174000000)] ALIASES = [LT580VHF, ] @directory.register class Th9000440Radio(Th9000220Radio): """TYT TH-9000 440""" VENDOR = "TYT" MODEL = "TH9000_440" BAUD_RATE = 9600 valid_freq = [(400000000, 490000000)] ALIASES = [LT580UHF, ]