This section mapped from Chirp img file	
NOT MAPPED: Key Assignments, DTMF, FleetSync

x41		// 1 Byte, TOT(Dispatch)[sec]: 15-600, increments of 15
x43		// 1 Byte, TOT(TEL)[sec]: 15-600, increments of 15
x45-x46	// 2 Bytes, Transpond Delay Time [sec]: 0-300
x47-x48	// 2 Bytes, TX Inhibit Time [sec]: 0.5-8.0 in increments of 0.5
x49		// 1 Byte, System Search: '30'=None, '31'=Manual, '32'=Auto
x60-x61	// 2 Bytes, [Scan]Dropout Delay Time[sec]: 0-300
x62-x63	// 2 Bytes, [Scan]Dwell Time[sec]: 0-300
x64-x65	// 2 Bytes, [Scan]Look Back Time A[sec]: 0.35-5.00 in .05 increments
x66-x67	// 2 Bytes, [Scan]Look Back Time B[sec]: 0.5-5.00 in .05 increments
x68		// 1 Byte, Scan Type: '30'=Fixed System Scan, '31'=List Type System Scan
x69		// 1 Byte, [Scan]Revert System Type:
		//	'32'=Selected+TalkBack, '33'=Selected, '31'=Last Used, '30'=Last Called
x72		// 1 Byte, # of Banks/Systems programmed
x7F		// 1 Byte, All below interact: (incomplete, pain in my a**)
		//	   Clear to Talk: 'FF'=true, 'FB'=false
		//	   Free System Ringback: 'FD'=true
		//	   Dispatch(PTT Release Tone): 'EF'=true
		//	   Telephone(PTT Release Tone): 'DF'=true
		//	   Conventional(PTT Release Tone): 'BF'=true
		//	   Encode Data Type: 'FF'=Normal, '7F'=Invert
		//	   [Scan]Revert Group Display: 'F7'=true
		//	   [Scan]Off Hook Scan: 'FE'=true		
x80		// 1 Byte, All below interact (incomplete, pain in my a**)
		//	   Off Hook Decode: 'E5'=true, 'ED'=false
		//	   Off Hook Horn Alert: 'E1'=true
		//	   Conventional Busy LED: 'E7'=true
		//	   Selective Call Alert LED: 'C5'=false
		//	   Display Character: 'E5'=Group Name, 'E4'=Sys#/Grp#
x82		// 1 Byte, All below interact (incomplete, pain in my a**)
		//	   Panel Test: 'EF'=true, 'EE'=false
		//	   Panel Tuning: 'ED'=false
		//	   Firmware Programming: 'EB'=false
		//	   Cloning: 'E7'=false
x84		// 1 Byte, All below interact: 'F8'=ALL false (incomplete, pain in my a**)
		//	   Power on Tone: 'FF'=true, 'FE'=false
		//	   Warning Tone: 'FB'=false
		//	   Control Tone: 'FD'=false
x8A		// 1 Byte, Minimum Tone Volume: 0-31, 0=off
x8B		// 1 Byte, Tone Volume: 0-31, 0=off, 'Continuous'='FF'
x8C		// 1 Byte, Sub LCD Display: '31'=Group, '30'=System, 'FF'=None
x8D		// 1 Byte, Bank/System name text length 0-10
x8E-x8F	// 2 Bytes, Horn Alert Time [sec]: 0-30
x90		// 1 Byte, All below interact (incomplete, pain in my a**)
		//	   Squelch Logic Type: 'BF'=Active Low, 'BE'=Active High
		//	   Squelch Logic Symbol: 'B7'=TOR, 'BF'=COR
		//	   Access Logic Type: 'BD'=Active High, 'BF'=Active Low
		//	   Access Logic Symbol: 'AF'=Pulse, 'BF'=Continuous
		//	   Horn Alert Logic Symbol: '9F'=Pulse, 'BF'=Continous
x94-x9F	// 12 Byte, Power-on Message
xA7-xAE	// 5 Bytes, Radio Ident. e.g. 'M0981' 0A,FF,F2  ***Overlaps with below? shortened ident in code
xAE		// 1 Byte, Related to Data password enable. 'F2' = disabled 'B2' = enabled
xAF-B4		// 6 Bytes, Radio Password
xB5-xBA	// 6 Bytes, Data Password
xD5-xE4	// 16 Bytes, Begin of TX
xE5-xF4	// 16 Bytes, End of TX value
xFE		// 1 Byte, All below interact (incomplete, pain in my a**)
		//	   Signalling: 'FD'=OR, 'FC'=AND
		//	   PTT ID: 'FD'=BOT, 'FB'=EOT, 'F9'=Both (see xD5-xF4 above for values)
x1E9		// 1 Byte, PTT ID Type: '00'=DTMF, '01'=FleetSync
x1EA		// 1 Byte, Timed Power Off [hour]: 0-8, 0=off
x1EB		// 1 Byte, Com0(Microphone Jack): 'FF'=None, '30'=Data, '33'=REM, '35'=Data+GPS	
x1EC		// 1 Byte, Com1(Internal Port): 'FF'=None, '30'=Data, '33'=REM, '31'=GPS, '35'=Data+GPS
x1ED		// 1 Byte, Com2(Internal Port):
		//	'FF'=None, '30'=Data, '32'=AUX Hook/PTT, '33'=REM, '34'=Data PTT', '35'=Data+GPS
x6021		// 1 Byte, All below interact: (incomplete, pain in my a**)
		// 	   Data TX with QT/DQT: 'F0'=true, 'F8'=false
		//	   ARQ Mode: 'B0'=true
	
[Bank section:]
x300		// 1 Byte, Bank/System number
x301		// 1 Byte, Number of Channels/Groups in this Bank
x302		// 1 Byte, Priority Group true=01  false=FF
x303-x30C	// 10 Bytes, Bank/System Name
x30D-x31F	// 15 Bytes, Unknown,Same on most banks:'00 00 00 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF'

[channel section: 32 Bytes per channel]
x320		// 1 Byte, Channel/Group number. Starts over at 01 in each new bank.
x321		// 1 Byte, Unknown
x322-x32A	// 9 Bytes, FCC Channel, determines Freq
x32B-x32C	// 2 Bytes, QT/DQT Decode. Too many to map. I would bet Kenwood re-uses same code for all radios
		// 	67    = '9E 02'
		// 	69.3  = 'B5 02'
		// 	71.9  = 'CF 02'
		// 	74.4  = 'E8 02
		// 	77    = '02 03'
		// 	79.7  = '1D 03'
		// 	82.5  = '39 03'
		// 	85.4  = '56 03'
		// 	88.5  = '75 03'
		// 	91.5  = '93 03'
		// 	94.8  = 'B4 03'
		// 	97.4  = 'CE 03'
		// 	100   = 'E8 03'
		// 	103.5 = '0B 04'
		// 	...
		// 	D745N = 'EC 29'
x32D-x32E	// 2 Bytes, QT/DQT Encode. Same values as Decode above.
x32F-x338	// 10 Bytes, Channel/Group Name
x339		// 1 Byte, Unknown
x33A		// 1 Byte, All below interact: (incomplete, pain in my a**)
		// Horn Alert
		// Compander
		// Data
		// PTT
x33B		// 1 Byte, All below interact: (incomplete, pain in my a**)
		// Call Indicator
		// Group Lockout
		// TX Inhibit
		// Talk Around
		// Option Signaling
		// Busy Channel Lockout
x33C-33F	// 4 Bytes, Unknown. Same on every channel I programmed: 'FF FF FF FF'