Project

General

Profile

Actions

Bug #2879

open

Chirp does not readout radio correctly

Added by Willi Doe over 8 years ago. Updated almost 4 years ago.

Status:
Feedback
Priority:
Normal
Assignee:
-
Category:
-
Target version:
Start date:
09/29/2015
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
Yaesu FT-90
Platform:
All
Debug Log:
I read the instructions above:

Description

Hello developers!

In 2013, I programmed my Yaesu FT-90 with Chirp. Everything went fine after I've clarified some transmission problems with Jens Jensen. I did not touch the radio since then because everything was fine.

Today I tried reading out the radio to reprogram some memory channels, and I realized that the "Duplex" value is set to "none" after I read out the radio for all memory channels. The VFO duplex settings are read out correctly.

Moreover, when I tried setting the duplex settings in the channel list to the correct value "-", Chirp also changes the 70cm/430MHz-Band offset frequency from 7.6MHz to 5MHz, which I also have to edit manually for each programmed channel.

I tried Chirp 0.4.0 under Debian Jessie and the latest Chirp weekly build (20150814?) under Windows XP, and the problem occurs in both versions.

Can you please have a look?

Many Thanks & Best Regards,

Willi

Actions

Also available in: Atom PDF