Project

General

Profile

Actions
Copy link

Bug #2937

closed

TYT TH-9800: 'frequency out of range' for valid frequencies

Added by Simon Rodda about 9 years ago. Updated over 4 years ago.

Status:
Closed
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
10/21/2015
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
TYT TH-9800
Platform:
Windows
Debug Log:
I read the instructions above:

Description

I understand that CHIRP supports certain bands.

But would it not be possible to enable bands that are supported by the radio?

The TH-9800 covers 4M | 70MHz; I downloaded the img from the radio, then populated that. But CHIRP complained about the frequency.

Files

Download all files
TH9800 capabilities.PNG (33.7 KB) TH9800 capabilities.PNG Simon Rodda, 03/29/2016 02:28 AM
TH9800 band snippet.PNG (11.1 KB) TH9800 band snippet.PNG Simon Rodda, 03/29/2016 03:57 AM

Related issues 1 (0 open — 1 closed)

Related to Bug #3367: TYT TH-9800(B)Closed02/21/2016

Actions
Actions
Copy link
 #1

Updated by Jens Jensen about 9 years ago

Hi Simon, perhaps you have a model which has different band support than the ones we have.
Can you please provide an unmodified radio image which we can examine.

Please download an image from the radio and, without any further modification in chirp, save the .img, and attach here.

Actions
Copy link
 #2

Updated by Simon Rodda over 8 years ago

Apologies for the delay; I will do this later.

This is the same problem as RM 3367, reported by William Michalson, for 220MHz.

Actions
Copy link
 #3

Updated by Simon Rodda over 8 years ago

Here's a screenshot in the meantime of the radio's capabilities -

You can see that if the [TX|RX] start/end is blank, it can't handle that range.

And that 60MHz start/end for both TX & RX is SET to 66 - 88 MHz.

Actions
Copy link
 #4

Updated by Simon Rodda over 8 years ago

It's raining like a so-and-so out there; so I ain't going to the car to download an img.

However, here's what's in a previous download.. see dat file format for explanation.

Actions
Copy link
 #5

Updated by Simon Rodda over 8 years ago

Me again...

It seems revision 2565 was to fix this /very/ issue...

Actions
Copy link
 #6

Updated by Simon Rodda over 8 years ago

Resolved...

Changed the max value for the 60M band in th9800.py to 71MHz:

    rf.valid_bands = [(26000000,  33000000),
                      (47000000,  *71000000*),
                      (108000000, 180000000),
                      (350000000, 399995000),
                      (400000000, 512000000),
                      (750000000, 950000000)]
  • SR
Actions
Copy link
 #7

Updated by Bernhard Hailer over 4 years ago

  • Status changed from New to Closed
  • Model affected changed from TH-9800 to TYT TH-9800

This appears to be complete (see #3367).
If there are further issues with this driver, please open a new bug report. Thanks!

Actions
Copy link

Also available in: Atom PDF

Copyright 2023 CHIRP Software LLC