Project

General

Profile

Actions

Bug #8315

closed

Radioddity GA-510: Chirp will not accept OFF as a Duplex selection to restrict Transmit

Added by David Little over 3 years ago. Updated about 3 years ago.

Status:
Closed
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
10/07/2020
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
Radioddity GA-510
Platform:
All
Debug Log:
I read the instructions above:

Description

Error received "Invalid value for this field" Second Line "Unkown attribute_data in chirp.bitwise.arrayDataElement


Files

debug.log (52.5 KB) debug.log Radioddity GA-510 Debug Log David Little, 10/07/2020 07:45 PM
Radioddity_GA-510_ Test image.img (7.24 KB) Radioddity_GA-510_ Test image.img Radioddity GA-510 Test Image David Little, 10/07/2020 07:50 PM
Actions #1

Updated by Bernhard Hailer over 3 years ago

  • Status changed from New to Feedback
  • Model affected changed from GA-510 to Radioddity GA-510
  • Platform changed from Windows to All

Could you please provide a full debug log as described in the Wiki: "How To Report Issues"? Thanks!

Actions #2

Updated by David Little over 3 years ago

Radioddity GA-510 Debug Log - Will not allow Duplex selection to be off

Actions #3

Updated by David Little over 3 years ago

Radioddity GA-510 Test Image - Will not allow Duplex selection to be off

Actions #4

Updated by Jim Unroe over 3 years ago

Not all radios support disabling TX on a per-channel basis. Are you able to disable TX using the factory programming software? If yes, then program 2 channels using the factory software, both identical except for one being TX disabled. Then download from the radio with CHIRP and save it to a CHIRP Radio Images (*.img) file and attach it to this issue.

Jim KC9HI

Actions #5

Updated by David Little over 3 years ago

Hi Jim, I felt that may be the case and it will be reported (as confirmed) to the Radioddity Development Team. Sorry to waste your time on this. I needed to know if it was a shortcoming in the CPS, or Firmware/Hardware. The Radio only offers None, and the CPS handles it by having entries for RX and TX frequency. Neither Duplex or RX Only fields are offered. I believe it could be cured by more intuitive Firmware but is not a firmware updatable radio as far as I can tell. Although it appears to be UV-5R based, and the option is accepted there, it has not been made available on the GS-5B. Thank you for the time and consideration.

Actions #6

Updated by Jim Unroe over 3 years ago

David,

With most factory CPS I have used for these Chinese radios, there is no actual setting to disable TX. TX is disabled by leaving the TX frequency field blank.

Jim KC9HI

Actions #7

Updated by Bernhard Hailer about 3 years ago

  • Status changed from Feedback to Closed

It looks like the topic is sufficiently discussed. Please let us know in case this ticket should remain open.

Actions

Also available in: Atom PDF