Bug #8933
closedYaesu FT-70D download config from radio OK, will not upload
0%
Description
I can put the radio into ADMS and can download the current config. Port is /dev/cu.usbmodem000000
However, when I try to upload a file (modified or unmodified back to the radio, while still continuing to be in ADMS, the radio Vendor and Model are greyed out. Attempting to proceed results ins a "failure to ack block 1".
Other problem is that CHIRP freezes while entering data, but this is not the main problem.
I think I've read everything that might help. Further advice appreciated
Updated by Roger Barson over 3 years ago
Solved - read the instructions again and despite the maker etc being greyed out, pressed the MODE button then the OK button and it worked fine.
Updated by Bernhard Hailer over 3 years ago
- Subject changed from FT70D download config from radio OK, will not upload to Yaesu FT-70D download config from radio OK, will not upload
- Status changed from New to Closed
- Model affected changed from (All models) to Yaesu FT-70D
Resolved by submitter.