Activity

From 11/05/2021 to 12/04/2021

Today

12:45 pm New Model #9577 (New): Please include the Baofeng UV9G in the Chirp software: UV9G is not yet included. Possibly contact Baofeng to obtain a radio. Bill Mauer
05:16 am New Model #9575 (New): Abbree AR-F5: Looking to see if this new radio can be added to the CHIRP programming. There is not software available from the man... David McGlothlin

12/02/2021

07:15 am Bug #9573: UV-9R plus: Attach an image from the radio while it is in its "working" state. Then one-by-one make a single change and upload it... Jim Unroe
07:04 am Bug #9573 (Feedback): UV-9R plus: Whoops. Looks like I accidentally selected "resolved" when I meant to select "feedback".
Jim
Jim Unroe
05:23 am Bug #9573: UV-9R plus: Jim,
I've tried that also.. No matter what I do when uploaded radio receive goes to crap. EX..when I put it i nFM on... mark stone
04:29 am Bug #9573 (Resolved): UV-9R plus: It is not a good practice to directly upload a CHIRP Radio Images (*.img) file from a radio that is not the target ra... Jim Unroe

12/01/2021

02:41 pm Bug #9573 (Feedback): UV-9R plus: Recently purchased few more UV-9r plus radios in September. Programmed with updated CHIRP and noticed receive was awf... mark stone

11/29/2021

08:49 pm Bug #9571 (New): Won't start...crash: I am running a macOS Monterey 12.1 (beta) and CHIRP won't start. I am aware I am on a beta Os, but may be helpful fo... Tracy Clark
09:34 am Bug #9283: Yaesu FT-8800 not accepting non-standard repeater shift (offset): Update: This can be closed. The answer was to use "Split" and just define the TX Frequency. Anthony Naia
01:00 am New Model #7693: Retevis RT-648: Software Link in Issue Description does not work
Found Software at https://retevis.info/file.php?dir=software/RT/&fi... Hitmare Chelien

11/28/2021

08:27 pm New Model #8803: Wouxun KG-UV8H: Greetings Pavel, hoping you are feeling better. You're in our thoughts and prayers. I know this is off topic and were... JJ Jericho

11/27/2021

04:38 pm Bug #9569 (Feedback): Cannot install chirp-daily-20211118: You can't upgrade CHIRP while it is running. Close CHIRP, then run the CHIRP installer.
Check this "How to Avoid t... Jim Unroe
03:41 pm Bug #9569 (Feedback): Cannot install chirp-daily-20211118: Hello,
I have an older Dell Latitude E7250 Win10 64bit Notebook and I get an error code can't write file. Any help?
... James Aiu
02:10 pm Bug #9567 (New): TH-D7A(G) - not showing memory 0 and doesn't import CSV file: Chirp doesn't show the memory number 0 for Kenwood TH-D7A(G). It starts from memory number 1 and the last memory is... Luiz Tresso

11/26/2021

11:24 am Bug #9515 (Resolved): [BTech UV-5X3] Six VFO's are present in radio but not in Chirp.: A patch has been submitted. Support will be in the next CHIRP daily build following acceptance.
Jim KC9HI Jim Unroe
07:58 am Bug #9515 (In Progress): [BTech UV-5X3] Six VFO's are present in radio but not in Chirp.: Jim Unroe
02:45 am Bug #9515: [BTech UV-5X3] Six VFO's are present in radio but not in Chirp.: @#5@ works for me, Jim!
Thanks!
@-Rusty-@
AE5AE Rusty Haddock

11/25/2021

12:07 pm Bug #9515: [BTech UV-5X3] Six VFO's are present in radio but not in Chirp.: Played around with this some more today. Here are some additional samples...
@#4@: same layout as @#3@ except repl... Jim Unroe

11/23/2021

05:58 pm New Model #8123 (Resolved): Retevis RT68 / RT668 support: Patches have been submitted for both the Retevis RT68 and the Retevis RT668. Support will be in the next CHIRP daily ... Jim Unroe
04:57 pm New Model #8123 (In Progress): Retevis RT68 / RT668 support: RT68 and RT668 radios have been provided by Retevis.
Jim KC9HI Jim Unroe
05:16 am Bug #9565: Baofeng UV-5R MK5 - SCSN bypass SKIP setting changes other configuration settings: Obviously my mistake, I thought I did the clone download before changing the setting but must have not. The MDF shoul... kerry cole

11/22/2021

09:41 pm Bug #9515: [BTech UV-5X3] Six VFO's are present in radio but not in Chirp.: I think I still prefer "Saved" but "Preset" is fine. Ship it! :)
Rusty Haddock
08:11 pm Bug #9515: [BTech UV-5X3] Six VFO's are present in radio but not in Chirp.: Yeah. They aren't the VFOs. I agree, they are kind of like "storage" or "presets" that can be loaded to into the corr... Jim Unroe
07:46 pm New Model #9217 (Resolved): Retevis RB618: Patch submitted. Support will be in the next CHIRP daily build following acceptance.
Jim KC9HI Jim Unroe
07:44 pm New Model #9217 (In Progress): Retevis RB618: RB618 radio provided by Retevis.
Jim KC9HI Jim Unroe
06:39 pm Bug #9565 (Feedback): Baofeng UV-5R MK5 - SCSN bypass SKIP setting changes other configuration s...: That's because you didn't download from the radio first to capture the Memory Display Format (MDF) setting first. The... Jim Unroe
06:16 pm Bug #9515: [BTech UV-5X3] Six VFO's are present in radio but not in Chirp.: Jim Unroe wrote:
> Rusty,
>
> I've been thinking about this off-and-on and since I finished a new radio yesterday... Rusty Haddock
01:53 pm Bug #9565 (Feedback): Baofeng UV-5R MK5 - SCSN bypass SKIP setting changes other configuration s...: I have NOASA on channel 1. When I mark it to (S) SKIP (when scanning) and upload the configuration to the radio(s), ... kerry cole
07:49 am New Model #9559: Retevis RB18: Thanks Jim, awaiting addition to CHIRP.
These are nice little radios.
Will be nice to be able to program thru CHIR... David Billcheck
03:08 am Feature #9383: Yaesu FT991: Riccardo Ricci wrote:
> Is in planning add functionality to manage FT-991 or FT-991A memories via CAT interface? Sof... Alexander Hahn

11/21/2021

08:30 pm Feature #9563 (New): Leixen vv898sp access to 480mhz: Hi, I'm new to this, but I have an Leixen vv898sp and require access up to 480mhz which the radio is capable of but C... Phil Coleman
02:08 pm New Model #9511: Retevis RB-18: No problem Jim. As long as it get's addressed.
Dave David Billcheck
02:04 pm New Model #9511 (Feedback): Retevis RB-18: This is being addressed with issue #9559. Sorry about the duplicate.
Jim KC9HI Jim Unroe
02:02 pm New Model #9559: Retevis RB18: Yeah. I thought there was an open issue because I requested radios from Retevis that people has requested. Unfortunat... Jim Unroe
01:04 pm New Model #9559: Retevis RB18: Asked about this #9511 David Billcheck
11:30 am Bug #9515: [BTech UV-5X3] Six VFO's are present in radio but not in Chirp.: Rusty,
I've been thinking about this off-and-on and since I finished a new radio yesterday, I spent some time with... Jim Unroe
08:54 am Feature #8205: Leixen vv 898 - 898S setting squelch step: Hi,
any news about this feature request?
thanks
Iw2evk Roberto
Roberto perotti
04:39 am New Model #9407 (Closed): Radioddity DB25-G: The Radioddity DB25-G is now supported in the latest CHIRP daily build.
Jim KC9HI Jim Unroe

11/20/2021

07:05 pm New Model #9559 (Resolved): Retevis RB18: Patch submitted. Support will be in the next CHIRP daily build following acceptance.
Jim KC9HI Jim Unroe
05:35 pm Feature #9561 (New): Anytone driver: Additional Option Settings: I have a PowerWerx DB-750X (Anytone driver). With it, I've researched several more settings than what anytone.py curr... Craig Jones
04:59 pm New Model #9237: Radioddity GM-30: This is an update regarding Alex Martin's post about the Pofung P15UV. I saw a new listing for the radio and it looks... Joseph David
04:32 pm New Model #9559 (Resolved): Retevis RB18: Add the Retevis RB18 as a CHIRP supported radio model. Retevis has provided sample radios to be used for the project. Jim Unroe

11/19/2021

04:55 pm Bug #9495: Wouxun KG-UV8E settings will not populate uhf tx limits are out of range: Great news, Enjoy!
Feeling well now, I sometimes get cramps in my legs and knees, but nothing serious...
Little... Pavel Milanes
01:38 pm Bug #9495: Wouxun KG-UV8E settings will not populate uhf tx limits are out of range: Hey Pavel,
The new patch dropped yesterday and I got it installed and hooked up to the Wouxun today. It worked gre... Daniel Winsor

11/18/2021

11:27 pm New Model #9557 (New): Kingru Radio: Need help with this radio. Any similiar product type that can use for this radio software?
KINGRU SC-111
400-520MHz Rizky Sudiantoro
12:28 pm Bug #9539 (Closed): Baofeng 888S-Squelch level: Please don't copy tickets from other people and create duplicates from it: it creates unnecessary clutter which is ha... Bernhard Hailer
12:25 pm Bug #9497 (Feedback): Baofeng 888S-Squelch level: Please review #7255, possibly the comments there help.
There's also useful information in #8733.
Please let us know... Bernhard Hailer
12:14 pm New Model #9529: Baofeng UV-XR: Please follow and post on #6959. Thanks. Bernhard Hailer
12:08 pm Bug #9531 (Feedback): SPLIT NOT WORK !!!!: It would have helped if you listed the maker and model of the radio, and also describe the problem you have - debug l... Bernhard Hailer
11:58 am New Model #8803: Wouxun KG-UV8H: Pavel Milanes wrote:
> Joseph 'et al.'
>
> Sadly, the COVID waves has impacted everybody life in a way or another... Joseph Poe
11:49 am New Model #8803: Wouxun KG-UV8H: Joseph 'et al.'
Sadly, the COVID waves has impacted everybody life in a way or another, in my case I'm getting les... Pavel Milanes
08:48 am Bug #9555: python 3 branch syntax errors: Well. Actually, the py3 branch is littered with py2 constructs... :-/
Failed to import /nvme2/projects/chirp.hg/ch... Anders Knudsen
08:44 am New Model #8803: Wouxun KG-UV8H: Pavel Milanes wrote:
> Pentti Pärnänen wrote:
> > Hi
> >
> > Any progress on this one?
>
> Yes, slow but prog... Joseph Poe
08:38 am Bug #9555 (New): python 3 branch syntax errors: A few py2 things sneaked into the py3 branch.
Here's the diff to fix:... Anders Knudsen
07:21 am New Model #9553: Luiton LT-458: A CHIRP developer most likely cannot reverse engineer the radio's cloning protocol without a radio and working factor... Jim Unroe
06:27 am New Model #9553: Luiton LT-458: My initial comment may have been worded incorrectly. I have four LT-458 radios. 2 I bought a few years ago, and a pai... Sean Smith
05:26 am New Model #9553 (Feedback): Luiton LT-458: The Luiton LT-458 doesn't appear to be new. It seem to have been available since at least 2017. The OEM software can ... Jim Unroe

11/17/2021

11:35 am Bug #9051 (Closed): Settings tab empty for QYT KT-8R: Applied in changeset commit:11b922422d1d. Anonymous
11:34 am Revision 3620:87039272c040: Fix missing _gmrs attribute on btech base class: Related to the fix for #9407 Dan Smith
11:14 am Revision 3619:11b922422d1d: [KT-8R] Settings tab empty for QYT KT-8R: The Settings tabs in CHIRP are empty when the KT-8R has TMR set to M+ABCD.
This driver was derived from the QYT mobil... Jim Unroe
11:13 am Revision 3618:368b14dc7e27: [DB25-G] Radioddity DB25-G: This patch adds support for the Radioddity DB25-G GMRS mobile radio.
resolves #9407 Jim Unroe
10:47 am New Model #9553 (Feedback): Luiton LT-458: It seems that the new LT-458 radios aren't supported with the available programming software from Luiton Sean Smith
09:47 am New Model #9551 (New): Retevis RB-27B: New Retevis RB-27B FRS
22FRS-11NOAA Dual Watch
0.5-2watt
FM Radio
Would like to see support for this radio David Billcheck
09:05 am Feature #9535: Comment line: Thanks Jim. After much trial and error I did figure out a way to keep a "master list" of frequency where I can popul... Randal Donnell

11/16/2021

11:07 am New Model #9241: Radioddity DB20-G: Keith Benicek wrote:
> Since it appears that someone, perhaps it is Radioddity that is offering to LOAN a DB-20G
>... Jim Unroe
10:09 am New Model #9241: Radioddity DB20-G: Since it appears that someone, perhaps it is Radioddity that is offering to LOAN a DB-20G
(Equipment Loan Offered: ... Keith Benicek
08:40 am Bug #9547: Retevis RT95: Yes. Since Ubuntu/Mint 20 it is recommended that you use the CHIRP flatpak to get the missing dependencies. But that ... Jim Unroe
08:34 am Bug #9547: Retevis RT95: now i found information about this bug... Joerg Korte
08:25 am Bug #9547: Retevis RT95: your are right , _i dont like monday , ahm micky$oft_ , so im am using Linux Mint or Debian
but now i found a ... Joerg Korte
08:04 am Bug #9547 (Feedback): Retevis RT95: On my Windows PC I was at *CHIRP daily-20211016*. I just upgraded to *CHIRP daily-20211105* and then to *CHIRP daily-... Jim Unroe
06:22 am New Model #9549 (New): Midland CT999: hi guys,
could not find this model nor any one that corresponds.
probably chinese inside but what kind :) kim Meul
02:49 am Bug #9547 (Feedback): Retevis RT95: last time i have had RT95 set by chirp. i don't know witch day i lost RT95 in my list (see picture)
anyone have an... Joerg Korte

11/15/2021

04:31 pm New Model #9453 (Closed): TechSide TS-T9+: Support will be in tomorrow's CHIRP daily build.
Jim KC9HI Jim Unroe
04:29 pm Bug #9495 (Closed): Wouxun KG-UV8E settings will not populate uhf tx limits are out of range: Applied in changeset commit:3422af0cedf3. Pavel Milanes
03:58 pm Revision 3617:3422af0cedf3: [KG-UV8E] Add support for new version with lowe UHF band, fixes #9495: A new hardware revision, it has a UHF RX range from 350-520 Mhz (TX restricted
from 400-520Mhz); it's lower in 50 Mhz... Pavel Milanes
03:58 pm Revision 3616:4bc0697ed378: [TS-T9+] TechSide TS-T9+: This patch adds support for the TechSide TS-T9+.
Addresses #9453 Jim Unroe
07:57 am New Model #9545: Pofung P11UV: Hit wrong key before I was done typing. Sorry about that! Handheld is clone of Retevis RB-27 or Baofeng G11S. Was abl... K. Orr
07:41 am New Model #9545 (New): Pofung P11UV: K. Orr

11/14/2021

04:54 pm Feature #9535 (Feedback): Comment line: CHIRP reads the memory from the radio. It is this memory "image" that you manipulate, store to a CHIRP Radio Images (... Jim Unroe
04:17 pm Feature #9535: Comment line: Better yet, if possible, I wish a column called "City" or "City/State" would auto populate even though it would not u... Randal Donnell

11/13/2021

02:09 pm Bug #9543: Can't install chirp-daily in Ubuntu 20.04: S Michael Smith wrote:
> One other thing needed on Ubuntu 20.04 (and likely most Ubuntu distros):
>
> sudo usermo... Jim Unroe
07:31 am Bug #9543: Can't install chirp-daily in Ubuntu 20.04: One other thing needed on Ubuntu 20.04 (and likely most Ubuntu distros):
sudo usermod -a -G tty $USER
sudo usermo... S Michael Smith
06:21 am Bug #9543: Can't install chirp-daily in Ubuntu 20.04: h1. Success!
The magic was "sudo dpkg-reconfigure ca-certificates" and just letting it do its thing. Once certifi... S Michael Smith
06:07 am Bug #9543: Can't install chirp-daily in Ubuntu 20.04: Thanks Jim,
I have tried all of these. Here's an example of what I get just by trying to update flatpak (yes, I've ... S Michael Smith
05:45 am Bug #9543: Can't install chirp-daily in Ubuntu 20.04: S Michael Smith wrote:
> Also, isn't there a Python 3 version under way? I'm not great with Python, but would be gl... Jim Unroe
05:41 am Bug #9543: Can't install chirp-daily in Ubuntu 20.04: S Michael Smith wrote:
> Thanks, Jim, but as I mentioned, I can't get flatpak to work for *_any_* install. I don't ... Jim Unroe

11/12/2021

08:04 pm Bug #9543: Can't install chirp-daily in Ubuntu 20.04: Also, isn't there a Python 3 version under way? I'm not great with Python, but would be glad to help if I can unders... S Michael Smith
08:02 pm Bug #9543: Can't install chirp-daily in Ubuntu 20.04: BTW, I'm KY4IX... S Michael Smith
08:02 pm Bug #9543: Can't install chirp-daily in Ubuntu 20.04: Thanks, Jim, but as I mentioned, I can't get flatpak to work for *_any_* install. I don't know what's wrong with it,... S Michael Smith
06:59 pm Bug #9543 (Feedback): Can't install chirp-daily in Ubuntu 20.04: On distributions that have dropped python2 and other CHIRP dependencies, the recommended way to install CHIRP is by u... Jim Unroe
06:17 pm Bug #9543 (Feedback): Can't install chirp-daily in Ubuntu 20.04: I have attempted in several ways to install chirp 20211105 to a new Ubuntu 20.04. Python 2 is no longer supported, b... S Michael Smith
05:22 pm Bug #9541 (New): Cannot Download from TYT TH-7800: local variable 'ack' referenced before assignment: I'm having an issue downloading the data from my TYT TH7800. I have seen other users report something similar in the ... Patrick Snyder
11:15 am Bug #9539 (Closed): Baofeng 888S-Squelch level: I put the Squelch level to 0 and write it to the radio.
Now, the green led is always ON.
I try to change it through... Cesar Williams
09:38 am Bug #9495: Wouxun KG-UV8E settings will not populate uhf tx limits are out of range: Sorry to hear about the extended recovery path for you Pavel. Thank you for getting the patch submitted. I sure do ... Daniel Winsor
09:11 am New Model #9537 (In Progress): Yaesu FTL-2001, 2007, 7002, 7007: This is an ancient model from Yaesu, but still working on the wild.
The page http://www.tfd.hu/tfdhu/index.php?n=3... Pavel Milanes
09:02 am Bug #9495 (In Progress): Wouxun KG-UV8E settings will not populate uhf tx limits are out of range: Patch sent to dev queue.
Sorry for the delay, COVID was no big deal, but post covid... oh boy... I can't walk more... Pavel Milanes

11/11/2021

06:39 pm Feature #9535 (Feedback): Comment line: I wish there was a free form comment line off to the right where we could enter something like City/state etc. I wou... Randal Donnell
03:09 pm Bug #8639: Mac M1 Chip: Ok, my instructions earlier assume you're copying it to the Applications directory in your user directory (~/Applicat... Scott Lopez
03:00 pm New Model #9529 (Closed): Baofeng UV-XR: This looks to be just another one of many so-called "waterproof" variants. Try BF-A58 if it only supports 6 character... Jim Unroe
02:58 pm New Model #6959 (Feedback): Baofeng UV-XR: This looks to be just another one of many so-called "waterproof" variants. Try BF-A58 if it only supports 6 character... Jim Unroe
01:48 pm Bug #8639: Mac M1 Chip: Oddly, when loaded in "Error Reporting Mode, I was able to connect and download my config from my Baofeng UV-5R. But ... Brian Jalet
01:45 pm Bug #8639: Mac M1 Chip: Ok, sorry for all the noise from me here. I ran chirp.app while holding the <COMMAND> key. It actually launched indic... Brian Jalet
01:37 pm Bug #8639: Mac M1 Chip: In fact, I can't even find the ~/.chirp directory at all. Confused....Thanks again for any help you can provide. Brian Jalet
01:24 pm Bug #8639: Mac M1 Chip: I'm sorry, I should also probably state that for whatever reason, I cannot find the debug log where it the instructio... Brian Jalet
01:21 pm Bug #8639: Mac M1 Chip: Thanks for the response. I should know this, but can you tell me how to sow the diagnostic information? Forgive me if... Brian Jalet
12:33 pm Bug #8639: Mac M1 Chip: The instructions I gave still work for me, on a MBA M1, running 12.1 as well. Can you please provide some diagnostic ... Scott Lopez
11:51 am Feature #9533 (New): Questions about Flatpak: Is the Flatpak version of Chirp Daily x86 only?
Is there, or will there be a version for ARM?
Anyone considering D... Kevin Shumaker
08:06 am Bug #8639: Mac M1 Chip: Still not working for me, after following every instruction above. I am on 12.1 Monterey, so I know I'm bleeding edge... Brian Jalet

11/10/2021

08:06 am Bug #9531 (Feedback): SPLIT NOT WORK !!!!: [[https://www.youtube.com/watch?v=Oq3wStx-JZE]] Marek Zientarek
06:32 am New Model #9529: Baofeng UV-XR: Sorry, This one https://chirp.danplanet.com/issues/6959#change-18147 David Billcheck
06:28 am New Model #9529: Baofeng UV-XR: I asked about this in https://chirp.danplanet.com/issues/6957#change-18149
No response from the team. David Billcheck
05:30 am New Model #9529 (Closed): Baofeng UV-XR: Good morning,
I recently bought a Baofeng UV-XR but I realize that it is not present in your list of models.
This ... Guillaume MEILLEUR

11/09/2021

08:21 am Bug #9495: Wouxun KG-UV8E settings will not populate uhf tx limits are out of range: Hey Pavel,
How are you feeling? How are you doing with your healing journey from the muckity-muck? Hope you are... Daniel Winsor
07:01 am Feature #9527 (New): chrip-daily fails to install on RaspiOS Bullseye: The following packages have unmet dependencies:
chirp-daily : Depends: python-libxslt1 but it is not installable
... Mikhail Grushinskiy

11/07/2021

05:11 pm Bug #9461: KENWOOD TK732G: WITH THE NEW VERSION SAME ERROR MICHEL ANTOINE DRIVET AMADOR
05:02 pm Bug #9409: radio stuck in either kill or stun mode: Don't import them into any other image. Pick one and upload it directly to your radio. Then report back.
Jim KC9HI Jim Unroe
04:54 pm Bug #9409: radio stuck in either kill or stun mode: The parent file should be how the radio was configured from the factory and the only difference between configured an... noah becker
01:17 pm Bug #9515: [BTech UV-5X3] Six VFO's are present in radio but not in Chirp.: Jim Unroe wrote:
> Rusty Haddock wrote:
> > Bernhard Hailer wrote:
> > > Looks like we can close this ticket? Than... Rusty Haddock
12:42 pm Bug #9515: [BTech UV-5X3] Six VFO's are present in radio but not in Chirp.: Rusty Haddock wrote:
> Bernhard Hailer wrote:
> > Looks like we can close this ticket? Thanks.
>
> Jim, were you... Jim Unroe
12:37 pm New Model #9521 (Feedback): ZASTONE D900: ... but it's also a DMR radio which currently can't be supported by Chirp. The infrastructure for DMR has yet to be d... Bernhard Hailer
12:37 pm Bug #9515: [BTech UV-5X3] Six VFO's are present in radio but not in Chirp.: Bernhard Hailer wrote:
> Looks like we can close this ticket? Thanks.
No. I am not sure if this satisfies Rusty's... Jim Unroe
12:35 pm New Model #2311: Quansheng TG-UV2: This is a closed ticket. Please post on #177 as suggested. Thanks! Bernhard Hailer
12:33 pm Bug #9515: [BTech UV-5X3] Six VFO's are present in radio but not in Chirp.: Bernhard Hailer wrote:
> Looks like we can close this ticket? Thanks.
Jim, were you going to add displays of all ... Rusty Haddock
12:25 pm Bug #9515: [BTech UV-5X3] Six VFO's are present in radio but not in Chirp.: Looks like we can close this ticket? Thanks. Bernhard Hailer
12:23 pm New Model #6957: UV-S9: I believe we could close this ticket? Thanks. Bernhard Hailer
06:39 am Bug #9525: estandir rango en Baofen UV-5R (expand range on Baofeng UV-5R): Jorge Ortiz HP8-GAL wrote:
> LA VENTANA DE CONFIGURACION NE APARESE EN BLANCO, CON EL PROGRAMA CHIRP
This is usua... Jim Unroe
05:06 am New Model #6957: UV-S9: Thanks Jim. Didn't know it was a hardware thing. David Billcheck

11/06/2021

09:44 pm Bug #9515: [BTech UV-5X3] Six VFO's are present in radio but not in Chirp.: Jim Unroe wrote:
>....
> So once again...
>
> 1 set the 6 VFO in the radio how you would like them to be
> 2 do... Rusty Haddock
08:40 pm Bug #9525 (New): estandir rango en Baofen UV-5R (expand range on Baofeng UV-5R): LA VENTANA DE CONFIGURACION NE APARESE EN BLANCO, CON EL PROGRAMA CHIRP
_THE CONFIGURATION WINDOW IS [NOT] BLANK, ... Jorge Ortiz HP8-GAL
05:44 pm Bug #9409: radio stuck in either kill or stun mode: Do any of the added files make any difference?
Jim KC9HI Jim Unroe
03:44 pm New Model #9523 (New): Kenwood ProTalk TK-3201 et 3301: Bonjour, pouvez vous me dire si les PMR446 Kenwood TK-3201 et TK-3301 sont pris en charge par Chirp ?
Un grand mer... Nathanaël RAMPHFT
02:50 pm New Model #6957 (Feedback): UV-S9: David Billcheck wrote:
> Also no separate section for squelch adjustments for 220 freq's
> Downloads and uploads O.... Jim Unroe
02:42 pm Bug #9515: [BTech UV-5X3] Six VFO's are present in radio but not in Chirp.: Rusty Haddock wrote:
> Sorry Jim, but I'm using (gasp) build #666, downloaded your Python module,
> loaded it with ... Jim Unroe
01:45 pm Bug #9515: [BTech UV-5X3] Six VFO's are present in radio but not in Chirp.: Sorry Jim, but I'm using (gasp) build #666, downloaded your Python module,
loaded it with File->Load Module, and my ... Rusty Haddock
01:41 pm Bug #9409: radio stuck in either kill or stun mode: I've tried to fash the radio with the factory settings from chirp but it still reads TX STOP!. If I flash it to the c... noah becker
08:20 am New Model #6957: UV-S9: Wondering if there will be any movement on this. David Billcheck

11/05/2021

08:13 pm Bug #9515 (Feedback): [BTech UV-5X3] Six VFO's are present in radio but not in Chirp.: Rusty,
Give this demo driver module a try to see if this will suit your needs. It includes the "6 VFOs" in the upl... Jim Unroe
07:29 pm New Model #9453 (Resolved): TechSide TS-T9+: Patch submitted. Support will be in the next CHIRP daily build following acceptance.
Jim KC9HI Jim Unroe
07:11 pm Bug #9471: Checksum error: I downloaded the Nov 5 chirp-unified-daily-20211105.app.zip. The new Chirp app for Mac does NOT correct the error: Ch... Guy Immega
06:53 pm New Model #9407 (Resolved): Radioddity DB25-G: Patch submitted. Support will be in the next CHIRP daily build following acceptance.
In the mean time, continue us... Jim Unroe
05:55 pm Bug #9051 (Resolved): Settings tab empty for QYT KT-8R: Patch submitted. The fix will be in the next CHIRP daily build following acceptance.
In the mean time you can sele... Jim Unroe
05:09 pm Bug #9519 (Closed): REF: Bug #9051 Settings tab empty for QYT KT-8R: I'm going to close this issue and do the work under the original issue (since this one is a dupe of #9051).
Jim KC9HI Jim Unroe
04:55 pm Bug #9519 (Feedback): REF: Bug #9051 Settings tab empty for QYT KT-8R: Please provide the list of choices from TMR menu in your radio.
Thanks,
Jim KC9HI Jim Unroe
04:29 pm New Model #2311: Quansheng TG-UV2: So it's been 6 years since this was requested, is there any light at the end of the tunnel? I have several of these r... Paul Dyke
04:02 pm New Model #9521 (Feedback): ZASTONE D900: This radio has been out a long time now, it's a clone of the TYT MD380 and several other radios, none of which are su... Paul Dyke
03:57 pm Bug #9519 (Closed): REF: Bug #9051 Settings tab empty for QYT KT-8R: I seem to be still having this same bug on my QYT KT-8R, if I have the TMR (Transceiver Multi Reception) set to M+ABC... Paul Dyke
01:45 pm Bug #8773 (Closed): Need help getting Chirp to download and open: No feedback. Bernhard Hailer

« Previous

Also available in: Atom