Roadmap

chirp-daily

71%

968 closed (70%)   417 open (30%)

Related issues
Bug #169: VX-7 doesn't recognize memory groups until one is set on the radio's keypad
Bug #209: need py27-suds for osx
Bug #334: TYT TH-UV3R :: chirp program seems to access radio but writes empty .img file
Bug #409: vx-8dr, banks not working
Bug #695: UV-5RA Backlights are gone.
Bug #711: Repeaterbook query in DC does not work
Bug #921: Incomplete CSV data
Bug #929: Alinco DR-235TMKIII not programming NFM
Bug #955: Icom IC-91AD banks missing
Bug #963: Yaesu VX-7R fail to communicate
Bug #1053: Baojie BJ-UV99
Bug #1081: wrong repeater offset in Icom ID-51
Bug #1089: stock_configs file not opening properly in Windows 8
Bug #1113: IC-2100H
Bug #1189: Anytone AT-5888UV Read Error
Bug #1227: TYT TH-UV3R :: radio does not upload memories to CHIRP
Bug #1241: locales not included in Linux builds
Bug #1355: Chirp dooes not populate the frequencies
Bug #1373: Error when downloading from VX-8DR on Mac
Bug #1419: FT-60R loss of skip feature during upload and download
Bug #1437: tpe exports
Bug #1491: AnyTone AT-5888UV tone squelch programming problem
Bug #1511: VX-8R Failure to Communicate with the Radio: Received Incomplete Image from Radio
Bug #1513: Re:
Bug #1571: Baofeng UV-82L
Bug #1593: No me arranca el programa (Program doesn't start)
Bug #1615: Yaesu VX-8DR - Cannot be imported because mode NFM not supported
Bug #1619: Yaesu FT-8800 Banks no programming on RH side
Bug #1665: Kenwood TM-D700 will only allow freq change, not pl or others
Bug #1735: Yaesu VX-8DR - Frequencies programmed with chirp have frequency offset in TX/TR
Bug #1775: Puxing PX-777
Bug #1797: Misleading Message "An ERROR has Occurred"
Bug #1803: Wouxun KG-833 programming
Bug #1805: Rename/Delete and Shift memory clears bank membership
Bug #1859: Wouxun KG-UV2D Radio not responding
Bug #1891: Unable to copy/paste memories on FT-8800R
Bug #1897: Baofeng UV-5R - I cannot save a duplex / split frequency
Bug #1911: .img file with matching Firmware still causes CHIRP to crash and radios to not work
Bug #1937: DR-06 programming issue
Bug #1957: baofeng programming
Bug #1965: Yaesu FT-8800R Right Side Memory Banks Not Programming
Bug #2003: Channel Skip Not working on BAOfeng UF-5R
Bug #2019: I can download but can't upload to any of my FT-60's
Bug #2041: Squelch
Bug #2067: GT3 MarkII Not Responding
Bug #2075: error programming
Bug #2079: Uploading on IC-V82 hangs at 50%
Bug #2097: UV-82 Unsupported Firmware US2S25
Bug #2105: 12/10 daily build won't install
Bug #2131: New Baofeng UV-B5 - Radio did Not Ack ... - OEM soft-Ok
Bug #2145: Wouxun KG-UV8D Mode and Power
Bug #2207: FT-8800R Upload Programming Issue
Bug #2237: BAOFENG BF-F9V2+
Bug #2239: Baofeng BF-F9V2+ - Chirp crashes when uploading settings
Bug #2289: Windows 8.1
Bug #2301: OS X Freezes between walkie swaps
Bug #2303: Yaesu FT-2800M can't read header.
Bug #2333: got a nv-5 that will not accept CHIRP
Bug #2413: px-2r download fail
Bug #2417: Name set in chirp not set in a radio
Bug #2451: Intek KT-980HP radio download error
Bug #2477: Error when reading Yaesu FT-2800M
Bug #2479: Unable to Disable Transmit to Create Receive-only Channels
Bug #2561: ft60 / prolific serial cable - will read from radio but won't write
Bug #2605: IC-T70A does not work with FTDI cable at all
Bug #2681: Baofeng UV-5RCHP not working
Bug #2695: Connecting with Yaesu FT-7900R
Bug #2739: Yaesu FT1DE name field size overrun
Bug #2741: Yaesu FT1DE units problem
Bug #2749: Bf-F9V2+ Not responding
Bug #2773: Yaesu FT-60 upload
Bug #2803: Error
Bug #2817: CHIRP does not upload only specified, but all, memories in new bank to VX6R
Bug #2879: Chirp does not readout radio correctly
Bug #2887: Th-uvf8d settings issue
Bug #2897: Settings blank Baofeng BF-888
Bug #2901: Windows 10 Change language issue CHIRP daily-20150814 & 20151005
Bug #2971: 2900 error
Bug #2987: BF-F8HP
Bug #2997: Application Crashes when adjusting viewable memory range / exporting Anytone UV5888.img file
Bug #3005: Doesn't load the Chirp with Puxing-777
Bug #3025: FT-1802 Fails to upload
Bug #3049: UV 5R + program issue
Bug #3061: Baofeng UV-5RV2+ does not transmit
Bug #3073: Upload Vx-6r error Mac OS X
Bug #3075: Luiton LT-898UV settings
Bug #3087: UV-82 on Mac, will upload to chirp once, then will not download to radio
Bug #3097: Software does not change the language.
Bug #3111: TYT TH9000D
Bug #3115: Baofeng UV82HP not recognized but no error message
Bug #3117: BF-F8HP "Radio did not respond"
Bug #3143: Yaesu Ft-1900 Failed to read header
Bug #3155: Chirp will not import RepeaterBook
Bug #3157: Wouxun UV-3D programming issue
Bug #3159: IC 2200H only showing channel names of 8 of 40 programmed channels.
Bug #3163: Yaesu FT-1900/FT-2900/FT-8800 problem
Bug #3173: Baofeng 997-S - CHIRP - No Response Issue
Bug #3181: chirp won't startup in windows 10
Bug #3255: uv-5rtp
Bug #3267: Retevis RT5RV (Baofeng UV5R variant) programming issue
Bug #3301: Failed to communicate with radio: Radio not responding
Bug #3303: UVB5 Programming issue
Bug #3335: Yaesu FT-2800 can't read header
Bug #3345: Radio refused to send second block 0x1fc0
Bug #3347: Chirp won't open in Windows 10
Bug #3359: error 3
Bug #3361: BF-8HP
Bug #3397: Baofeng UV-5R
Bug #3415: Hungarian language not activated
Bug #3449: Unblock frequencies on Baofeng UV-5R
Bug #3469: please help with this...
Bug #3479: TYT-9800 & BF-9v2+
Bug #3513: Baofeng BF-A58
Bug #3551: Yaesu FT-8800 Memory Banks - Ubuntu V15.10
Bug #3553: Download doesn't work
Bug #3567: FT1900 Failed to read header
Bug #3573: Yaesu ft2900r programming issue
Bug #3579: UV-5R_frequency_limits
Bug #3581: Baofeng UV-5R frequency limits
Bug #3585: Connecting PowerWerx DB-750X to Mac and CHIRP
Bug #3593: FT-7900R Download, but no upload.
Bug #3603: C'ant connect BAOFENG UV-5RE to CHIRP error 995
Bug #3607: Chirp daily not working after Ubuntu update
Bug #3623: An Error has occured
Bug #3631: Error on Yaesu FT-1900r
Bug #3637: BTECH UV-2501+220 - error The extra ID is short, aborting.
Bug #3673: UV-5RTP wont communicate even in BF-F8HP mode
Bug #3685: Yaesu VX-170 downloads but won't upload
Bug #3687: KG-UVD1P not responding
Bug #3717: Freezes upload on Icom ID-880H
Bug #3737: TH-9800 Won't communicate with most recent build
Bug #3763: Icom IC-T70E bad frequency problem
Bug #3789: PX-777 won't download from radio
Bug #3813: Kenwood TK-860G frequency range adjustment
Bug #3847: IC92AD - Errors
Bug #3867: BFB297 Baofeng UV -5R does not send the Relay .
Bug #3883: Inability to Change Radio Image With RepeaterBook.com File
Bug #3903: Chirp Does Not Respond after trying to download or upload to radio
Bug #3909: Yaesu FT-2800M can't read header
Bug #3919: Yaesu FT-2800M can't read header
Bug #3927: UV 5R
Bug #3961: GT3 Will not enter clone
Bug #3969: HobbyPCB RS-UV3 Live Mode Errors in CSV Import
Bug #4001: BUG IN BAOFENG UV-6R - MENU SETTINGS IN WHITE
Bug #4055: Error Message "Failed to communicate with radio: local variable 'response' referenced before assignment"
Bug #4111: New out of the box QYT KT-8900
Bug #4135: I cannot get CHIRP to work on my newer Windows Laptop
Bug #4211: UV5-X3 220 MHZ defaults to NBFM
Bug #4237: Yaesu VX-3R. No download from radio.
Bug #4273: "Download from the radio" - FT7800
Bug #4293: error reporting is enable
Bug #4295: Yaesu VX-8DE: unable to program broadcast AM and FM frequencies
Bug #4307: BF-F8HP radio model no longer working with UV-5RTP
Bug #4323: gt3 tp & gt5 tp
Bug #4339: Yaesu FT-8900 repeater offset
Bug #4347: Retevis RT1 - VOX Inhibit On Receive
Bug #4391: Baofeng GT-3TP giving incorrect model
Bug #4417: BaoFeng BF-F9V2+
Bug #4433: Baofeng GT-3WP Restarting during clone process
Bug #4443: Error Puxing PX-777
Bug #4459: Original Yaesu FT-817
Bug #4473: Puxing PX-2R Names
Bug #4481: UV-3R mark II
Bug #4527: Can't program 1200mhz frequencies into memory on D710
Bug #4529: Luthor TL-50 (= Juentai JT-UV9DR) TX frequency range
Bug #4537: Yaesu VX-6R
Bug #4545: ICOM ID-51A Plus 2
Bug #4563: TYT TH-9800+ (PLUS version) - Failed to communicate with the radio: Radio sent a short block.
Bug #4567: wouxon kg-uvdp1
Bug #4569: Baofeng GT-5TP
Bug #4577: WLN KD-C1: previous .img files are not recongnized. Download from radio reports Retevis RT-22.
Bug #4611: Chirp wont finish clone
Bug #4623: Randomly failed import CSV into Kenwood TM-V7
Bug #4627: VX-7r "Clone Errror" on radio
Bug #4629: Baofeng GT-3 TP "Radio did not respond" - Mac OSX
Bug #4647: Radio not talking to Chirp
Bug #4683: Offset written to TYT TH9800 radio is incorrect
Bug #4701: Baofeng GT-5TP not recognized
Bug #4717: How do I get the Mac version to actually acknowledge my FT-817ND that is connected to the USB Port???
Bug #4719: Wouxun KG-UV8D PL/DPL Decode
Bug #4721: Luiton Model: LT-898UV Failed to download from radio. Radio refused program mode
Bug #4725: Yaesu VX-3R MAC OS X can't upload to radio?
Bug #4753: Only odd channels are uploaded, nothing on Ch 1-9
Bug #4775: BTech UV-5x3
Bug #4785: impossible to connect to BF888S
Bug #4801: Suds library required for RadioReference.com
Bug #4827: Bluetooth Serial Communications
Bug #4833: Problems cloning Baofeng UV-82
Bug #4837: Bluetooth Serial Communications
Bug #4841: Yaesu VX 8DR
Bug #4843: Wouxun KG-UV8D connection problem
Bug #4891: UV-2501 Settings error
Bug #4893: Yaesu Ft-60 Still not uploading to radio
Bug #4911: Offset written to TYT TH9800 radio is incorrect
Bug #4925: Chirp & Mac OS 10.12 (Sierra ... a no go?)
Bug #4943: Repeat of #4007 - Error reads `GtkCellRendererText' does not have property `has-entry'
Bug #4945: Yaesu FT-8900 Failed to read header
Bug #4949: Baofeng BF-888S "radio failed to enter programing mode"
Bug #4953: Baofeng UV-5R+
Bug #4955: ICom ID-880h CL ERR
Bug #4957: UV-5R not showing settings tab
Bug #4963: UNABLE TO ACCESS RADIO REFERNCE.COM Server raised fault: 'Invalid Username or Password'
Bug #4971: CHIRP DAILY 2017-06-27 works on my WIN 10 but do not start on WIN XP on PC and ASUS EEE
Bug #4981: Numerous errors trying to send stuff to my radio
Bug #4991: UV-B5 no longer option Duplex off in CHIRP daily-20170706.
Bug #4999: Ubuntu 17.04 problem
Bug #5007: ID-51a PLUS - "Failed to communicate with the radio: Out of sync with radio."
Bug #5011: BF-F8HP
Bug #5017: Leixen VV-898E read/write error
Bug #5019: VV-898E channel reading
Bug #5021: Yaesu VX-3R hangs up on upload; Mac OSX.
Bug #5039: Radio refused to accept block 0x0510
Bug #5045: bf888 s error conect
Bug #5047: BF888S 'Radio Refesued to Enter Programming mode' Error + Chinese Language + Long beep Tone
Bug #5057: BF UV5R issues with Mac OS Sierra 10.12
Bug #5059: Firmware 1
Bug #5061: Yaesu FT-2800M, can't put into clone mode
Bug #5065: Chirp doesn´t open or save any image
Bug #5067: Chirp Doesn't Export Power Mode Of Channel
Bug #5073: UV-3R Offset and Step incorrect
Bug #5075: Desktop Entry File (Linux)
Bug #5099: Code Cleanup patch
Bug #5103: DTMF & ANI code changing for QYT KT-8900
Bug #5111: UV5R offset precision not right.
Bug #5119: Jetstream JT270MH in weird state after failed upload
Bug #5127: BF-F9V2+ Unable to download Radio - Radio did not respond
Bug #5139: Issues with new FT1D/FT1XD Firmware
Bug #5141: Yaesu V-7 Issue - Chirp Presents ONLY first 110 rows of Memory Banks and Freezes
Bug #5147: Issues with MAC OS X
Bug #5149: Attempting to clone a Kenwood TK-272G
Bug #5155: Chirp on Mac os
Bug #5167: Yaesu FT2DR memory banks problem
Bug #5169: Cannot program Yaesu FT-2900R from Mac running OS X Sierra (10.12.5)
Bug #5171: UV-5R Radio Did Not Respond (no cable issue)
Bug #5181: UV-82 reading problems with chirp-daily-20170714
Bug #5195: radio not supported
Bug #5205: Baofeng UV-3R+ decimal in wrong place
Bug #5215: I recently downloaded chirp program and it worked for one day
Bug #5223: Uploading TH-D72(Clone) shows "Error" on memories with -7.6MHz shift
Bug #5229: Baofeng GT-3 Mark II # CHIPR
Bug #5241: Incorrect model Baofeng GT-5TP
Bug #5243: ft-2900 Rtsystem usb-29f ubuntu failed to read header
Bug #5245: debug notepad
Bug #5257: Cannot load in Mac Sierra
Bug #5263: UV-5RV2+ radio not connecting to Chirp
Bug #5267: CHIRP Resets some changes
Bug #5269: Programming Rugged Radio RM-25R. Radio is similar to QYT8900, Waccom mini 8900.
Bug #5275: Improper treatment of unknown fields for Alinco DJ-G7
Bug #5281: Export to CSV bug - incorrectly populated fields
Bug #5289: Several Empty Channels when trying to download
Bug #5293: KG-UV8D Bug: When uploading to the radio, the R-CTC is set to some non-OFF value, silencing all channels
Bug #5315: Copy and paste function Do not work with Excel 2016!!!
Bug #5317: Chirp Cannot read Excel 2016 .cvs files
Bug #5319: Chrip cannot read Excel 2016 .xml Files
Bug #5323: icom ic t70e
Bug #5327: ft2900 header error
Bug #5335: BTECH UV-5X3, Unable to download from radio
Bug #5337: MAC DRIVER FOR OS X Yosemite Arduinos with CH340
Bug #5341: Baofeng UV-6R unable to detect model
Bug #5345: Clone failed: Radio did not respond
Bug #5349: Write Error Icom IC-T70A w/ MacOS High Sierra
Bug #5351: QYT KT8900 - I cannot change from wide to narrow in Chrirp
Bug #5355: column order setting parsing is calling split on None.
Bug #5357: Many cases where an exception is caughted and printed w/o any context
Bug #5361: Query data sources from Radioreference.com not loading
Bug #5363: Baofeng BF-888s "Radio Refused to enter programming mode"
Bug #5369: WOUXUN KG-UV8D(PLUS)
Bug #5385: Chirp does not properly read or set split tone setti mg
Bug #5401: Leixen VV-898 v.107 program / offset issue
Bug #5411: Icom IC-7100
Bug #5417: Chirp Windows installer 11-26-17 failed to install
Bug #5419: vv-898 FMN FMW issue
Bug #5425: Repeater Offsets not imported correctly from Repeater Book
Bug #5427: CHIRP START-UP
Bug #5431: Chirp won't star in Windows 10(1703), Laptop (Thinkpad T420)
Bug #5445: IC-E7 (P7) fails upload data on Mac
Bug #5457: instructions
Bug #5459: frequency is out of supported range
Bug #5465: QYT KT-7900D settings missing
Bug #5467: Yeasu FT-1900R fails programming at 75%
Bug #5469: TH-9000 220 - Radio did not accept block at 0100
Bug #5473: Alinco DR-06T Split TSQL And Tone Frequencies
Bug #5477: Baofeng GT-3TP not transmitting
Bug #5479: Baofeng GT-5TP - Incorrect Model Selected
Bug #5495: Icom ID-51 - offset in alpha channels incorrect
Bug #5503: Cannot read/write radio memory: Wouxun KG-UVD1P
Bug #5529: Radio switches back to Chinese language after programming and will not keep names on frequencies
Bug #5535: Yaesu FT-8800 -- Right Memory Bank is not working at all
Bug #5543: Error when Uploading to VX-6 on macOS 10.13.3
Bug #5553: Wouxun KG-UV8D Plus - settings blank
Bug #5557: Baofeng UV-5R
Bug #5565: Programation du baofeng UV-9R
Bug #5567: Connecting radio to computer
Bug #5575: Baofeng UV-5R - CHIRP does not display Apple FTDI driver in Comm port
Bug #5589: Icom IC-208H Unexpected Response From Radio
Bug #5591: IC-91A Unable to communicate
Bug #5601: Cloning to radio stops in middle (Baofeng UV-5R)
Bug #5611: not sure if bug... but need help
Bug #5613: WOUXUN KG-UV3D Radio not in list, MAC OS10.13.3. High Sierra
Bug #5615: UV-6 cannot download settings
Bug #5627: CHIRP and Baofeng UV-3+
Bug #5633: Non-matching Firmware Message 2 for sequential s/n F8HP
Bug #5641: Yaesu FT-50R Non Standard Tx Offset Error
Bug #5643: FT-70DR uploads slightly corrupt
Bug #5645: Baofeng BF-F8HP (UV-5R 3rd Gen) won't program
Bug #5667: Yaesu FT-2800 CHIRP Problems
Bug #5685: No response from radios
Bug #5693: Yaesu vx-6 clone download issue
Bug #5723: Change language
Bug #5727: chirp-daily-20180412 EXC_BAD_ACCESS (SIGSEGV) on OSX high sierra
Bug #5729: Yaesu FT-897 not downloading channel names
Bug #5735: Chirp not starting
Bug #5739: Cannot get chirp to run
Bug #5745: UV-82 DX Compatiblity
Bug #5749: Kenwood Tm-V71 - Lower case name characters display as blanks
Bug #5755: Problem Connection Baofeng UV-82HX
Bug #5783: Crash when attempting to download from DB750X
Bug #5803: Baofeng UV-6R
Bug #5817: Please can you add baofeng uv-8d on chirp.
Bug #5835: Today's build errors
Bug #5837: Radio Did Not Respond Error.
Bug #5851: Cannot download from Baojie BJ-218 in my Mac
Bug #5863: Yaesu VX-7R checksum failed
Bug #5907: Radioddity DB25
Bug #5917: Baojie UV99
Bug #5933: Icom IC-208, IC-208H offset frequency not always correct
Bug #5953: Chirp Expands vhf and uhf transmit frequencies
Bug #5955: Kenwood TK-7102, Radio refused program mode
Bug #5963: Baofeng UV-82 showing "Incorrect Model" when reading
Bug #5969: Baofeng UV-5R: names not changing
Bug #5979: split plus cross tone yields error on PX-777
Bug #5981: Baofeng Mark III
Bug #5983: QYT 7900D/Radioddity QB25
Bug #5993: Tone 88.5
Bug #5999: KT-8900D TMR Setting
Bug #6013: Baofeng UV-5R - Tone Mode column values set to TSQL after table refresh if the value is set to Cross.
Bug #6019: Retevis RT-21: No Response from Radio
Bug #6033: "Failed to communicate with radio: Unable to read block 00 expected 4 got 0" FT-817ND (US)
Bug #6037: QYT KT-8900D failed to identify radio
Bug #6041: WLN
Bug #6043: Can't write: C:\Program Files (x86) CHIRP\_hashlib.pyd
Bug #6045: Btech MURS-V1 Radio Read Error
Bug #6057: Won't Open COM Port
Bug #6061: Baofeng UV-82C, UV-5HP cannot be programmed manually after Chirp use on them
Bug #6069: baofeng gt3tp-mark3 Firmware bfp3-3 Code 150121n after backup radio not respond
Bug #6071: FTDI software disabled - Mac OS (High Sierra 10.13.6)
Bug #6083: Wiki missing description for TSQL-R
Bug #6089: FTM-3200 Checksum Failed [064A-06C8 (@06C9)]
Bug #6097: Programming '-' offset
Bug #6099: downloads
Bug #6105: KT-8900D
Bug #6109: Leixen 898. can't download from radio
Bug #6115: Radio did not enter clone mode
Bug #6135: Baofeng UV-B5 not uploading to radio on Mac OS version.
Bug #6137: Upload to IC-T70A freezes
Bug #6145: Cannot read/write radio memory: Wouxun KG-UVD1P
Bug #6155: Yaesu VX-6E/R shift issue
Bug #6157: Yaesu FT-8900R Settings Tab Missing & Bands Tab Issues
Bug #6163: QYT KT-8900D not loading up
Bug #6171: Baofeng UV-82HP won't connect
Bug #6181: Baofeng GT-5TP
Bug #6187: Baofeng UV-5R UHF/VHF problem
Bug #6207: Icom 2300H - CHIRP hangs during upload to radio at about 50% complete
Bug #6215: Mackbook Issue
Bug #6217: Radioddity GA-2S: setting the side button not possible within CHIRP
Bug #6233: Yaesu Ft7900 "Radio did not ack block at 72" Radio did not ack block at 0
Bug #6249: KT8900D won't enter clone mode
Bug #6251: Radio Fails to connect
Bug #6255: Out of sync Issue for ID-51A
Bug #6261: UV-82HP Advanced Settings not transferring
Bug #6267: CRT-279UV clone QYT KT7900D does not enter clone mode
Bug #6271: UV-5R receive backlight not timing out
Bug #6275: Data Import from Radio Reference
Bug #6277: rpttool: import error
Bug #6279: chirpc: syntax error
Bug #6287: I need help installng
Bug #6293: Special channels button clears all memories / Yaesu FT-8900
Bug #6299: 20181214 wont install on Win10 Can't write files
Bug #6309: Retevis RT22 will not clone to radio
Bug #6311: BF-F8HP - Radio did not respond
Bug #6315: "Radio Identification Failed" || Luiton LT-316
Bug #6319: Unable to complete upload to VX-6R
Bug #6337: help
Bug #6339: BF-F8+
Bug #6341: This has probably been asked a million times but, I can't find a forum to search
Bug #6343: Failed to communicate, unexpected response - Icom ID-880H
Bug #6361: chirp-daily-20190104 Mac fails to launch
Bug #6371: All text rendered as squares in chirp-daily-20190112 (macOS)
Bug #6383: Settings Tab empty after setting PTT-ID (5-Tone)
Bug #6389: Puxing PX-2R errors reading/writing memories, fails miserably.
Bug #6401: Slow Read Error on AnyTone AT-5888UV
Bug #6411: Installer will not execute on Win10
Bug #6415: invalid CHIRP Version string
Bug #6431: BTech UV-50x3 programming
Bug #6435: Linux startup error
Bug #6437: UV-50x3 programming
Bug #6439: Will not link to GT-5TP
Bug #6471: Baofeng BF-F8HP - Error setting memory when changing an entry after downloading from radio
Bug #6475: Cannot import Excel files with 1.25 meter band frequencies
Bug #6477: Cannot install software
Bug #6483: Can't upload, menu item grayed out
Bug #6513: Baoefeng UVB6 and BF-T1
Bug #6515: Chirps not saving Frequency Splits
Bug #6523: Fix Leixen valid tuning steps
Bug #6535: GT-3TP: no programming option
Bug #6539: BF-F8HP- Firmware version N5R340B
Bug #6541: Fix BTech UV-50X3 valid tuning steps
Bug #6543: Fix Baofeng UV-B5 valid tuning steps
Bug #6547: Fix TDXONE TDQ8A valid tuning steps
Bug #6549: Fix Retevis RT1 valid tuning steps
Bug #6551: Fix Retevis RT21 valid tuning steps
Bug #6553: Fix Retevis RT22 valid tuning steps
Bug #6555: Fix Retevis RT23 valid tuning steps
Bug #6557: Fix Retevis RT26 valid tuning steps
Bug #6559: Fix KYD NC-630A valid tuning steps
Bug #6561: Fix anytone_ht valid tuning steps
Bug #6567: Error reading Baofeng UV-6
Bug #6573: ft4.py lacks a progress bar
Bug #6577: ft-65 offset scale factor should be 50000, not 25000
Bug #6581: cannot import from repeaterbook
Bug #6585: "Incorrect 'Model' selected." for Btech GMRS-v1
Bug #6601: FT-4 write to radio leads to error message
Bug #6605: FT4X name tags should allow characters + - / @ and *
Bug #6611: FT4/FT-65 VFO name order is scrambled
Bug #6621: TYT TH-9000D UHF Support
Bug #6631: Baofeng BF-T1 exception while reading attribute 'split'
Bug #6637: Icom V82 problem
Bug #6641: Yaesu FT 7100
Bug #6647: Baofeng UV-9R
Bug #6653: Yaesu FT-7100M connection problem
Bug #6671: Yaesu : Will CHIRP brick these radios?
Bug #6673: Traceback while trying to clone Icom ID-800H
Bug #6681: Baofeng UV-5R refused to send second block 0x1f00
Bug #6689: "Open" file selector window is blank
Bug #6703: BF-8FHP unavailable?
Bug #6705: mac 'The application "chirp-daily-20190412.app" can't be opened'
Bug #6717: New WLN KD C-1 // unknown identification string
Bug #6719: UV-5R and UV-5RX3 get VFO offsets wrong (entering 999.999 results in 99.99 when saved/uploaded)
Bug #6725: UV-5XP
Bug #6729: Rugged RH5R-V2
Bug #6733: Driver Cleanup: btech.py
Bug #6735: Fix Baojie BJ-218 valid tuning steps
Bug #6747: Retevis RT22 New firmware "Radio Identification Failed"
Bug #6749: traducir
Bug #6751: Chirp not seeing USB port.
Bug #6753: BF-F8HP
Bug #6757: problem reading data from WLN KD-C1 - Radio identification failed - (white model)
Bug #6763: KG-UV8D Plus does not parse DCS entries
Bug #6765: keypad/menu changes will not take after programming with PC/Chirp. Baofeng UV-5RTP and BF-F9V2+ affected.
Bug #6789: BAOFENG UV5R
Bug #6791: Error code when importing
Bug #6793: Frequency step issue with Radioddity R2 (related to 6745)
Bug #6795: BF-888 - try the file called ZT-V68.zip that is on the CD with the Prolific Cable
Bug #6797: BF-888 - try the file called ZT-V68.zip that is on the CD with the Prolific Cable
Bug #6803: WLN KD-C1 radio identification failed
Bug #6821: Problem selecting per-channel power levels in BTech GMRS-50X1
Bug #6825: RT23
Bug #6829: Tuning step not supported for Leixen VV-898s
Bug #6833: UV5R Problem
Bug #6837: Windows 10 1903 :Communication ports not displayed
Bug #6849: Baofeng UV-5XP settings don't show
Bug #6857: Baofeng uv-5r Radio refused to send second block 0x1f00
Bug #6861: Memory location number issue Kenwood TH-D7AG
Bug #6863: Can't program Tone
Bug #6865: Leixen VV898S show channel names not frequency
Bug #6869: Yaesu FT-65 Oddities
Bug #6871: The repository 'http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu disco Release' does not have a Release file
Bug #6873: Yaesu FT-4XR out of range frequency issues
Bug #6875: New to CHIRP - Having issues
Bug #6877: Chirp launcher
Bug #6883: could not open port com4: [Error 2] The system cannot find the file specified.
Bug #6889: Settings Tab empty after downloading from Puxing PX888k
Bug #6897: USB no Connection
Bug #6905: 7.12.19 Mac version stopped working
Bug #6909: TYT UV8000E stepping
Bug #6919: Unable to upload file
Bug #6925: Yaesu FT-4XR Skip Function is Inverted
Bug #6931: Chirp Daily 20190718 fails to open on macOS
Bug #6937: version 20190718 will not open in Windows 10 computer
Bug #6939: KT-7900D says "radio identification failed:
Bug #6943: Stalled upload with ICOM ID-800H
Bug #6947: could not open COM3 error.
Bug #6955: New SW Ver. Partialy working for me.
Bug #6963: Looking for image for Wouxun KG-UV6D
Bug #6969: GA-2S Partially Broken
Bug #6971: BTech GMRS V1 " not the amount of data we want"
Bug #6973: BTech GMRS V1 " not the amount of data we want"
Bug #6975: Upload error to Baofeng uv5R, radio refused to accept black 0x0000
Bug #6981: baofeng bf-888s
Bug #6983: Newest build
Bug #6989: Radio Identification failed error
Bug #6995: Wouxun KG-UV9D-Plus
Bug #7003: Not able to provision some radios.
Bug #7009: Baofeng GT-3TP: offset doesn't download
Bug #7015: tyt th9800/chirp
Bug #7019: CHIRP out of date, or is it?
Bug #7029: Yaesu FT-8800 Banks no programming on RH side
Bug #7031: IC-2730A occasional bank index errors
Bug #7053: Cannot import splinter frequencies (12.5KHz) on Kenwood TM-D700
Bug #7055: Baofeng UV-5R 8W mod - does not set power
Bug #7067: Baofeng 888s - Read, cannot write channels on Windows 10
Bug #7075: Icom download function is not testing checksum
Bug #7083: Won't Communicate
Bug #7085: Radio Download
Bug #7091: Luiton LT316 3W will no longer program
Bug #7099: Chirp wont run in Ubuntu
Bug #7103: [BAOFENG UV-9R] Programming channel names only allows 6 characters, should be 7
Bug #7107: QYT KT-7900D Settings Page Fails to Load
Bug #7111: QYT KT-7900D
Bug #7113: Zastone X6
Bug #7115: Baofeng UV-5R "Radio refused to send block 0x0000"
Bug #7117: Baofeng UV-5RTP chirp is loading and reading data but settings are blank.
Bug #7119: BF-888 "Refused to enter programming mode."
Bug #7121: Invalid ID for QYT KT-7900D
Bug #7129: Yaesu FT-7100M upload error.
Bug #7131: CHIRP Install
Bug #7133: No download from Yaesu FT-90
Bug #7139: Error downloading from Baofeng UV-6
Bug #7159: Baofeng UV-6R and Squelch (SQL)
Bug #7165: Step Error issues
Bug #7171: Yaesu FT-4x not in radio list now
Bug #7173: Baofeng UV-6R settings won't load if image countains out of boundaries value
Bug #7189: 6.25 step not available on Yaesu FT-4XE
Bug #7195: Boafeng GT 3TP
Bug #7199: Frequency Entry Error Checking Bug
Bug #7201: IO Catalina
Bug #7203: WLN KD-C1 gives error and fails when reading memories in daily 20191029
Bug #7205: YAESU VX-8 NOT CLONING
Bug #7217: Incorrect detection of UV-82 series CHIRP Radio Images (*.img) files
Bug #7221: 12.5 KHz tuning step not supported bug
Bug #7225: Not downloading from repeater book directory
Bug #7227: Not downloading from repeater book directory
Bug #7267: Baofeng UV-9R Driver
Bug #7279: Settings tab blank, and error "Tuning step 6.25 not supported" "Frequency requires 6.25kHz"
Bug #7295: [UV-82HP] Firmware Version Not Detected
Bug #7299: TM-V7 Not Reading or Writing UHF frequencies. VHF Ok
Bug #7315: QYT KT7900D
Bug #7343: UV-82HP
Bug #7349: Error setting memory: Tuning step 12.5 not supported
Bug #7383: Baofeng UV-82 not recognized
Bug #7385: Baofeng UV-5R - CHIRP fails to connect using Ubuntu 18 LTS & Prolific USB cable
Bug #7389: Baofeng UV-82???
Bug #7409: File->New is broken
Bug #7417: Yaesu FT-65R "Frequency out of supported range" error
Bug #7445: Leixen 898 >1.07 firmware - Also JetStream and other re-brands
Bug #7449: 12.5 KHz tuning step not supported bug on newer type "TK-370G" radio and variations
Bug #7451: TS-480 Auto-Baud Detection
Bug #7453: Kenwood Live: TMD710G Fixes
Bug #7455: Baofeng UV-5R radio not responding
Bug #7459: Baofeng UV-5R Export not correct
Bug #7463: Baofeng UV-5R Daily-20191206 Img not compatible with Daily-20191029
Bug #7477: [QYT KT-7900D] Add Support for a New MCU-Version
Bug #7485: IC-2720H : Clone failed: Failed to communicate with the radio: Did not get clone result from radio
Bug #7491: WLN KD-C1 does not work at all
Bug #7493: Kenwood TS-590SG
Bug #7497: Baofeng BF-UVF10 no response
Bug #7499: [UV-9R] Add support for Baofeng UV-9R
Bug #7505: Issue with run_all_test.bat
Bug #7527: Baofeng UV9R Plus - failed programming
Bug #7535: Please support Baofeng UV-5XP
Bug #7541: Error when trying to upload to Arcshell AR6
Bug #7545: Leixen VV-898S Jetstream JT-270MH mismatch
Bug #7551: Wouxon upload issue
Bug #7557: qty kt8900 -clone mode
Bug #7561: Cannot Read Radio or Radio Memory .dat Files Created with FT-3DR
Bug #7565: driver prolific
Bug #7601: [Yaesu FT-4, FT-65, FT-25] Sometimes channel names are not displayed correctly
Bug #7603: [Yaesu FT-4, FT-65, FT-25] After CSV import, channels are always low power
Bug #7605: [Yaesu FT-4, FT-65, FT-25] Automatic duplex value selection not working
Bug #7607: *buntu 20.04
Bug #7609: BF-888 - mostly unstable - returned unknown identification string
Bug #7611: Zastone Z-218 (Baojie BJ-218) - problem for modifying ANI_ID (individual code)
Bug #7617: Radio QYT KT7900D - Firmware
Bug #7619: BAOFENG GT-3WP UNKNOWN RESPONSE FROM THE RADIO
Bug #7625: Yaesu FT-857D An error has occurred
Bug #7633: Cloning from computer to radio Icom IC-2730a
Bug #7643: Chirp nor executing from MX-19.1
Bug #7645: Query and Import form RepeaterBook not working
Bug #7647: MacOS Catalina 10.15.3 - Cannot Access Local Directories That Are Also In iCloud
Bug #7649: CentOS 8 install via yum
Bug #7651: Baofeng UV-6R: Settings not loaded if bands not within spec
Bug #7653: Return of Not Seeing/Writing Setting Data for Newer Baofeng Model BF-888S
Bug #7655: unable to clone new radio
Bug #7657: Write to Radio problems
Bug #7659: [bj9900] Tuning Steps need updating
Bug #7661: Installer Program Failure
Bug #7667: Wouxun KG-UV9K tryed witch wouxun KG-UV9K PLUS setting this is the result a error at the end of reading it started well!
Bug #7671: CRT279U
Bug #7681: UV-5R Not accepting setting changes
Bug #7685: New software will not install
Bug #7691: Problem programming Baofeng UV82C
Bug #7699: PowerWerx DB-750X tuning steps (patch attached)
Bug #7703: UV-82HP
Bug #7705: UV-5R - A frequency NOT Programed
Bug #7717: Error communicating with Retevis RT23 on upload
Bug #7721: Yaesu FT-1900 invalid header
Bug #7723: Won't Upload data file to IC-2730 using MacOS
Bug #7725: Won't Upload data file to IC-2730 using MacOS
Bug #7727: Cannot get repeater book query to work
Bug #7729: Import from data source / Repeater book
Bug #7731: CHIRP is damaged and can't be opened. You should move it to the trash - Error
Bug #7739: help please
Bug #7741: New software will not install
Bug #7749: Baofeng UV-6R
Bug #7751: Baofeng UV-6R
Bug #7753: UV-8HP memory channel not work on/off
Bug #7755: Icom IC-208H Programming
Bug #7761: BTECH GMRS50X1 Settings
Bug #7765: upload fail on Yaesu VX-8R
Bug #7771: FT1900 Again
Bug #7779: KT-8900 will not enter clone
Bug #7785: Cannot save download
Bug #7787: Unable to download data from Icom IC-92AD on Linux - see also #6655
Bug #7793: Unable to open
Bug #7797: VX-8GE can't download from ht, nor upload.
Bug #7799: TYT-9800 Plus Quad Band No Settings Options. Only a blank area
Bug #7803: FT-1900E Invalid header
Bug #7807: Baofeng UV-82 MP programming model selection
Bug #7811: Fix for Windows Installer
Bug #7813: Error setting memory tuning step 12.50 is not supported(UV5R)
Bug #7821: Issues After Updating
Bug #7827: Radio identification failed
Bug #7833: Baofeng BF-888s programing
Bug #7835: Error setting memory: Frequency requires 12.50kHz step
Bug #7837: No way to install CHIRP on Ubuntu 20.04
Bug #7839: Yaesu FT-450D
Bug #7843: yaesu ft-2600m
Bug #7845: Unable to locate package, Ubuntu PPA
Bug #7849: CHIRP daily-20200430 can't insert 12.5 tuning step memory
Bug #7851: cross mode reverts to tsql or dtcs when refreshed or saved
Bug #7857: Radio sent incomplete block 0x0f00
Bug #7859: Python2 EOL prevents installation/running Chirp
Bug #7863: Failed to communicate with radio: Radio did not ack block 0 [FT-818 w/ Bluetooth]
Bug #7867: Chirp crash when moving rows
Bug #7869: Ubuntu 18.04x64, Chirpw don't run
Bug #7871: using flatpak on Ubuntu 20.04
Bug #7881: Baofeng BF-UVF10
Bug #7885: Cannot install chirp on Ubuntu 20.04
Bug #7893: step not supported
Bug #7901: could not open port 2: [Error 2] The system cannot find the file specified
Bug #7905: Issue with ICOM radios in general
Bug #7913: Fix Yaesu VX-6 valid tuning steps
Bug #7915: Radioddity QB25 failure to identify radio
Bug #7919: Yaesu FT-3DR
Bug #7921: Yaesu FT-7100M upload error.
Bug #7931: FT-817/8 Freq Step issue
Bug #7957: Chirp can't communicate with any of my radios
Bug #7959: Wouxun KG-UV6D E
Bug #7961: Radioddity QB25 Radio identification failed
Bug #7991: fix for Icom IC-T8E
Bug #8011: ID80H - OUT OF SYNC
Bug #8025: Unable to find Chirp-daily via termiunal or install once downloaded on LinuxMint 20
Bug #8027: Problemas al grabar Frecuencias
Bug #8031: TYT TH-UVF1 6.25kHz stepping not allowed
Bug #8039: Radioddity QB25 not going into clone mode when downloading from the radio
Bug #8045: Yaesu FT-65R scan skip setting switched
Bug #8051: Unable to find Chirp-daily via termiunal or install once downloaded on LinuxMint 20 (Duplicate of 7993)
Bug #8059: Yaesu FTM-7250D Frequency Range Error
Bug #8063: The "baofeng_wp970i.py" driver does not fully support radio models with 3 bands
Bug #8091: DSL code for baofeng not in chirp
Bug #8093: Alinco DR-235T: Unexpected response from radio
Bug #8119: FTM-7250 BUG - AM MODE
Bug #8145: QB25 - Radio Not Identified
Bug #8147: CTRL-UP is modifying the records when selecting multiple lines
Bug #8153: CHIRP won't open the IMG or CSV files if there is accent character in the file path
Bug #8159: ICOM IC-2730A DTMF # and * characters are reversed
Bug #8161: Canadian Zip Code problem
Bug #8169: BF-888s with fake PL2303 cable gets error "Radio returned unknown identification string"
Bug #8183: Yaesu FT-450D APO Off (0 hours) settings error
Bug #8189: FT-60R
Bug #8197: H-777 (as BF-888) failed to send to radio during upload (partial - stops at various locations) - downloads fine
Bug #8199: Radioddity QB25
Bug #8203: Baofeng GT-3WP Channel Name Limited to 6 Characters
Bug #8207: Baofeng UV-5R+plus DUPLEX channels
Bug #8217: IC-2300h Tx inhibit function
Bug #8223: Error reading data from radio: not the amount of data we want. UV-82 III
Bug #8233: Icom IC-2730 Tone modes
Bug #8237: Computer readout gets set but writing it to Baofeng corrupts the Duplex of - or +
Bug #8245: Kenwood TK-862 (NOT G) "Error setting memory: Frequency requires 12.50kHz step"
Bug #8277: Baofeng CH-6DMR Not Supported
Bug #8283: FT-8800 Bricked after programming by CHIRP (latest version)
Bug #8287: FT-4XR beep menu options are reversed
Bug #8297: kenwood TS-480HX/SAT Writing to memory causes memory channels to be stored in SPLIT mode
Bug #8321: Incorrect tone values for ANI/PTT-ID
Bug #8325: Nothing in the ports list Chromebook Linux
Bug #8335: Errors in icw32e
Bug #8337: BF UVF10 still doesn't work
Bug #8339: TH-UV8000D/E
Bug #8349: Wouxun KG-UV7D ham radio
Bug #8357: Can't program UV-9R
Bug #8363: Baojie BJ-218 Bug: Data mangled by CHIRP r20201014
Bug #8369: Chirp changes the 6+Power-On Message 1
Bug #8383: Baofeng UV-9R ERA Error reading data from radio: not the amount of data we want.
Bug #8391: Typo in Anytone AT-778UV Driver BAND_LIMITS
Bug #8393: Access
Bug #8407: Add remaining channel attributes and valid tuning steps to AnyTone 5888UV
Bug #8413: Anytone 5888 & CHIRP Crashing Every Single Time Its Done Reading The Radio
Bug #8451: [H777] Add alias for Retevis H777
Bug #8461: Typo in LIST_COLOR7 and LIST_COLOR8 Variable Names
Bug #8463: Structure for "spmute" in btech.py driver module is incorrect.
Bug #8473: Incorrect model selected UV-5R
Bug #8479: TYT UV88 ver 20201121
Bug #8487: Ubuntu 20.10 install
Bug #8505: WLN KD-C1 Mac OS - download failed
Bug #8511: Cannot erase or edit 6+power on lines on UV-82
Bug #8513: QYT KT8r
Bug #8533: Retevis H-777 won't upload image
Bug #8539: Baofeng_BF-F8HP does not display anything in settings
Bug #8555: old .img file can not be opened
Bug #8561: Kenwood TM-281
Bug #8567: Chirp daily build for MAC OS Sierra 10.12.6
Bug #8579: Canadian RadioReference search county name bug
Bug #8587: Server raised fault: 'Invalid County ID'
Bug #8599: Programming QB25 Radio
Bug #8601: Icom IC-V86 tone code issue.
Bug #8605: All freqs not uploading
Bug #8609: Cannot disable RESET menu in BTECH UV-5X3
Bug #8611: Driver Maintenance: anytone_ht.py
Bug #8615: Driver Maintenance: gmrsuv1.py
Bug #8617: Driver Maintenance: lt725uv.py
Bug #8619: Driver Maintenance: mursv1.py
Bug #8621: Driver Maintenance: retevis_rt1t.py
Bug #8623: Driver Maintenance: retevis_rt21.py
Bug #8625: Driver Maintenance: retevis_rt23.py
Bug #8627: Driver Maintenance: retevis_rt26.py
Bug #8629: Driver Maintenance: txdone_tdq8a.py
Bug #8631: Driver Maintenance: uv6r.py
Bug #8633: Driver Maintenance: vgc.py
Bug #8683: Settings tab blank on Canadian model UV88
Bug #8691: Baofeng S5 Plus
Bug #8693: Mac 10.12 Crashing and wont open.
Bug #8699: Chirp Crashes - Contacting as per Baofeng tech support
Bug #8701: Chirp Crashes - Contacting as per Baofeng tech support
Bug #8745: Icom IC-9x driver throws exception when a memory does not have a bank attribute
Bug #8765: Kenwood TK 860G 12.5 KHz Not supported
Bug #8771: Add further instructions for Icom IC-7100
Bug #8789: FT-65R 6.25kHz Step Missing
Bug #8795: Baofeng UV-82-III (UV82x3)
Bug #8819: Cloning Issue with February Update
Bug #8845: Error in exception handling stops OSX version to start if there is an error with loading the GTK libs.
Bug #8847: Error resolving _g_cclosure_marshal_VOID__VOID when starting up chirp
Bug #8861: Kenwood TS-590 SPLIT mode
Bug #8867: anytone 778uv
Bug #8869: Add OTG Radio V1 alias
Bug #8877: TS-480 67 Htz PL Tone Download
Bug #8905: CHIRP 4.1.1 (2020-04-06) - Windows download virus detections
Bug #8923: Boafeng BF-888s squelch problem
Bug #8929: Chirp download
Bug #8945: Incomplete CSV data
Bug #8947: Chirp is not populating the Settings tab on Wouxun KG-UV9P
Bug #8963: bf-888 get no power after programming,
Bug #8979: [LT-725UV] Wrong range specified for the Initial Chan: setting.
Bug #8991: New untitled csv files are slow to load.
Bug #8993: Kenwood TS-480 Live Mode channel change errors
Bug #8995: "rf.valid_dtcs_codes" setting missing from "Radio Features"
Bug #9005: BTECH GMRS-V1 original version
Bug #9007: "Failed to read header" when reading from Yaesu FT-2900 with MARS mod
Bug #9025: Icomciv base code mem.duplex
Bug #9031: UV-82 Not Displaying Settings
Bug #9033: CHIRP terminates abnormally when launched -- details below)
Bug #9035: Can't program Retevis RB26
Bug #9051: Settings tab empty for QYT KT-8R
Bug #9055: Problem Importing Radio Data
Bug #9081: AR-F8 (Wouxun KG-UV8D) digital tone error
Bug #9085: QYT kt-8900 new version
Bug #9089: Not able to insert new line // Application hangs on exit after recent update
Bug #9099: Bug on Connecting to TYT TH-UVF1 With Clone PL2303 Cable
Bug #9101: VX-8DR Blank Menu
Bug #9111: Abbree AR-F8, some settings missing
Bug #9139: QYT KT-8900D
Bug #9141: Radio version not in allowed list for AnyTone-778UV
Bug #9155: chirp does not work on mac m1
Bug #9179: Chirp Stuck on TYT TH-UV88 Clone Process
Bug #9187: Unable to download from Baofeng UV-5X radio
Bug #9209: Serial Port needed using software down load
Bug #9213: Wouxun kg-uv3d, 186.0 not supported -- chirp hangs
Bug #9215: MacBook Air OS 11.4 Big Sur - Chirp Crashes without launching (Last two builds, never - worked)
Bug #9219: repeaterbook
Bug #9221: repeaterbook
Bug #9223: repeaterbook
Bug #9225: BAOFENG UV-10R
Bug #9231: Cannot Set Duplex to "off" for Baofeng P10-UV (Radioddity GA-510)
Bug #9247: FT-65E: "5 Beep" is not configured correctly
Bug #9249: FT-65E: Configuring TX power level not possible
Bug #9255: Illegal offset programming possible, and apparently not fixable in Chirp
Bug #9259: TD H6 Tone problem
Bug #9271: TYT TH-9800D+ upload problem
Bug #9293: ERROR: Clone failed: Incorrect model ID, got P3107, it not contains P0260
Bug #9305: Retevis RT22S Programming Error
Bug #9307: 8/25 Daily Release will not start up after successful install
Bug #9315: Update not working
Bug #9323: QYT KT-8900D
Bug #9329: New version will not load .chirp files
Bug #9331: yaesu 8800
Bug #9333: Issue building from source on Pi3A+
Bug #9347: Chirp Not Communicating/No USB Drop Down
Bug #9349: ToneSql/ cToneFreq not importing into radio .img file.
Bug #9353: RT98 chirp issue, two versions of radio?
Bug #9357: qyt08900
Bug #9419: ICOM IC-7300
Bug #9439: Cannot open COM port, access denied
Bug #9447: "Name" information won't transfer to the radio correctly.
Bug #9459: New QYT kt-8900 "radio identification failed"
Bug #9461: KENWOOD TK732G
Bug #9463: QYT8900
Bug #9465: error opening file for writing
Bug #9469: Incorrect implementation of validate_memory() in uv5r.py driver.
Bug #9471: Checksum error
Bug #9473: Checksum error
Bug #9475: YAESU FT-50R Memories With Split Frecuencies Not Shown
Bug #9477: Update release info in Winget
Bug #9483: BF-A58S has a six character limit, but capable of seven characters.
Bug #9487: usb-serial driver
Bug #9497: Baofeng 888S-Squelch level
Bug #9505: No update to radio on Kenwood TS2000
Bug #9515: [BTech UV-5X3] Six VFO's are present in radio but not in Chirp.
Bug #9525: estandir rango en Baofen UV-5R (expand range on Baofeng UV-5R)
Bug #9539: Baofeng 888S-Squelch level
Bug #9541: Cannot Download from TYT TH-7800: local variable 'ack' referenced before assignment
Bug #9569: Cannot install chirp-daily-20211118
Feature #170: VX-7 - allow to reorganize channels in memory groups
Feature #371: Export/Import should include Power level
Feature #437: Setting in kg-uv2d
Feature #651: VX-8 Support programmable (band limit) memory scan (PMS) and skip channels
Feature #681: Support regional band plans
Feature #1047: Chirp won't run in a Python virtualenv
Feature #1907: Settings tab
Feature #2007: Find duplicate channels function suggestion
Feature #2167: Modify limits VHF FT-1D
Feature #3035: Please make (tag) a new release
Feature #3107: PLMR frequencies
Feature #3205: Leixen VV-898 Frequency range
Feature #3291: Jetstream JT-370M - individual ID setting
Feature #3407: Spanish Language (ES) (SPA)
Feature #3565: Kenwood TM-D710GA: show message explaining where to plug in data cable
Feature #3973: BTECH UV-5001
Feature #4547: Allow to change Icom IC-7100 CI-V address
Feature #4771: IC-P7: high speed (38400bps) cloning
Feature #4773: IC-208: cannot disable high-speed cloning
Feature #4799: Implement split MODE (e.g. RX in SSB, TX in CW) when radio supports it (e.g. Yaesu FT-857)
Feature #4903: Baofeng UV-5R Extra Hidden Features (with information)
Feature #5077: Add scalable SVG icon
Feature #5081: Chirp launches but menu bar is all-grey on OS X
Feature #5165: BF888s not letting me input out of range frequencies
Feature #5187: Yaesu VX5 add scan edge programming
Feature #5227: Baofeng UV-82 extended charset support
Feature #5429: Are there: CHIRP Recommended Memory Storage
Feature #5499: HOW CAN I ADD A NEW COLUMNS MEMORY PROERTIES -
Feature #5509: SSB Satelites
Feature #5569: Accessing Yaesu VX-6 Pre-programmed Short-Wave & VHF Marine Channels
Feature #5579: Yaesu FT-2D Chirp *.dat file open error
Feature #5585: Can we get chirp to match the menu terms of the radio we are programming?
Feature #5587: Can chirp be printed, or exported to Excel so it can be printed there?
Feature #5731: QYT KT-8900, How to change frequency range?
Feature #5819: Baofeng BF-F8HP frequency range extension
Feature #6059: Skip Flags on hyper memories
Feature #6091: Support for USB based devices (without USB to serial converter inside the cable or even the radio)
Feature #6307: CRT-279UV clone QYT KT7900D
Feature #6357: Yaesu FT-8900: hyper memories, home channels and settings to Chirp
Feature #6391: yi-889g / et-889 / ZT-889
Feature #6409: Baofeng GT-3WP on CHIRP on macOS
Feature #6443: Make CHIRP on Macintosh self contained
Feature #6445: Scanning Speed
Feature #6615: A driver should be allowed to force a channel to be receive-only
Feature #6761: FT-4XR, 4/29/2019 version of CHIRP
Feature #6799: Baofeng UV-82HP - Channel name on top line with correct frequency on bottom line.
Feature #6881: Is there a way to not include some channels (weather, police) in the scan chain?
Feature #6911: TYT TH-UV3R settings tab
Feature #7017: Work mode settings
Feature #7061: Yaesu VX-6R alpha vs frequency display
Feature #7063: Print feature
Feature #7105: BF-F+ power on + 6 message not updating
Feature #7149: new radio model
Feature #7467: Make Kenwood TM-D710G clone mode version
Feature #7469: Kenwood TM-D710G clone mode version; cleanup
Feature #7471: Kenwood TS-590 Radio Class name change
Feature #7533: Downloading from SD Card
Feature #7615: [Yaesu FT-4, FT-65, FT-25] proposal for some reorg
Feature #7621: IOS version of Chirp
Feature #7701: Baofeng UV-3R Plus - edit channel names
Feature #7979: Allow CH-specific TX blocking via zero-result TX offset ("-" duplex with <baseband> offset)
Feature #8007: Tooltips for knowing which item is referenced
Feature #8021: Requesting from Radioreference.com.com for a location outside of USA, ie the dreaded invalid county Id
Feature #8085: Assume ic910 23cm unit is present when no serial connection
Feature #8185: Tenway UV-5R Pro power levels
Feature #8205: Leixen vv 898 - 898S setting squelch step
Feature #8235: upload radio
Feature #8259: Window size is constrained by toolbar
Feature #8271: Layouts do not follow the Gnome human interface guidelines.
Feature #8319: Wouxun KG-UV9DPlus: use Chirp to adjust frequency limits and screen colors
Feature #8345: Yaesu FTM-7250D C4FM
Feature #8447: AnyTone AT-778UV
Feature #8465: Brazilian Portuguese Translation
Feature #8503: Naming convention cleanup
Feature #8569: Missing support for AnyTone AT-778 UV family in 20201221
Feature #8583: Remove "-" from Retevis RT-5R and RT-5RV Model Names
Feature #8649: Yaesu FT-897: download instructions need to be improved
Feature #8675: Chirp control of start-directory and last-directory
Feature #8841: Create a new issue for the language and include the language code. Here is a helpful list.
Feature #8983: Linux version missing Anytone 778uv
Feature #8987: Add Settings to ICOM IC-7300 live-mode
Feature #8989: Add Kenwood TM-D710G live-mode Settings
Feature #9029: Kenwood TS-480 Add Settings to Live Mode
Feature #9043: Busy Channel Lockout feature added for Retevis RT22FRS
Feature #9169: mygmrs.com integration
Feature #9257: It is not possible to use integer settings in mem.extra
Feature #9383: Yaesu FT991
Feature #9455: QYT 980PLUS
Feature #9561: Anytone driver: Additional Option Settings
New Model #177: Quansheng TG-UV2
New Model #218: Yaesu FT-10R, FT40R
New Model #449: TAIT 2020 Series EM-PMR
New Model #555: HYS UV-55
New Model #567: Icom IC-910
New Model #627: HYS TC-UV55
New Model #811: ADI AT-600
New Model #899: Wouxoun KG-UV920R
New Model #903: Icom IC-GM1500E
New Model #941: Duet DT-UVD1P
New Model #999: Suicom UV-King
New Model #1049: Kirisun radios (unspecified)
New Model #1067: Icom IC-M710
New Model #1121: Yaesu FT-8000R
New Model #1225: Baofeng UV-8, UV-8D
New Model #1229: Yaesu FT-8100
New Model #1237: Puxing PX-UV973 - dual-band cross-band repeat radio
New Model #1253: Yaesu FT-2600m
New Model #1285: Blackbox plus radios?
New Model #1339: baofeng uv-8d
New Model #1351: Wouxun KG-UV5D
New Model #1393: Yaesu FT-2600M
New Model #1423: Bao-hui or Baohui BH-620
New Model #1439: Quansheng TG-K4AT(UV)
New Model #1453: Iradio UV-F9
New Model #1467: Yaesu FT-8100R
New Model #1469: Yaesu FTM-400DR and FTM-400DE
New Model #1481: Icom IC-V8000
New Model #1489: Wouxun KG-UV950P Quad Band
New Model #1597: Yawes A-338Plus
New Model #1601: YAESU FTM400DR
New Model #1633: Kenwood TM-D700
New Model #1635: add puxing px-uv973
New Model #1639: AnyTone AT-3318UV-A
New Model #1657: Puxing UV-973
New Model #1721: Yaesu FT1DR
New Model #1745: Alinco DJ-V57T
New Model #1783: CRT 270M
New Model #1793: Polmar Work
New Model #1819: Wouxon KG-UV920P
New Model #1845: Alinco DR-635
New Model #1865: Alinco DJ-V5
New Model #1879: Tonfa TF-Q5
New Model #1893: SFE S850UV
New Model #1951: Icom F10 / F20, F1000
New Model #1953: Icom F10 / F20
New Model #2049: Midland HM477
New Model #2061: Anytone AT-3318UV Support
New Model #2063: Hytera TC-446S and TC-320
New Model #2157: Icom 746 Pro
New Model #2181: at5555 (RP-80 aquario pt-br)
New Model #2253: Icom IC-E7
New Model #2257: Wouxun KG-UVA1
New Model #2295: Kenwood TH-22E
New Model #2353: Icom V80E
New Model #2379: Yaesu FT-2400
New Model #2403: Kenwood TK-3302-1
New Model #2435: Wouxun KG-UV899
New Model #2443: Baofeng UV-9R+HP
New Model #2491: Alinco DR-605
New Model #2493: Alinco DJ-296
New Model #2531: Yaesu FT-991
New Model #2555: AnyTone AT-3208
New Model #2573: Tera TR-590
New Model #2589: TYT TH-9000D
New Model #2599: ANYTONE NSTIG-8R
New Model #2611: Puxing PX-2R PLUS (VHF)
New Model #2671: Wouxun KG-UV9D
New Model #2705: Intek KT-930EE
New Model #2771: Anytone 3318-UV-A
New Model #2775: Tera TR-590
New Model #2799: Baofeng UV-5RM HP
New Model #2853: Baofeng UV-5X
New Model #2921: Pofung UV-TEN4
New Model #2975: Yaesu FT-40
New Model #3083: TYT TH-900
New Model #3135: Vertex VX-2200e
New Model #3177: Wouxun KG-UV920
New Model #3199: Icom ID-5100
New Model #3225: QYT TK6188
New Model #3233: ZASTONE MP-600 (UHF & VHF Models)
New Model #3289: TYT TH-7800, TH-8000D
New Model #3315: Vertex VX-2200
New Model #3317: Yaesu HX370
New Model #3451: Baofeng A308
New Model #3477: TYT TH-7800 vhf/uhf dual band
New Model #3501: ICOM IC-FC310
New Model #3535: Wouxun KG-UV8D Plus
New Model #3583: HYS TC-P10W
New Model #3611: TYT TH-9000D
New Model #3707: Baofeng BF-9700
New Model #3751: Leixen Note
New Model #3839: TYT TH-UVF8
New Model #3873: Icom IC-F6061D
New Model #3877: Baofeng BF-E51
New Model #3879: Kenwood TK-2307
New Model #3905: HQT TH-2890
New Model #3915: Olympia P324
New Model #3931: Add support for the BTech UV-5X3
New Model #3941: AnyTone 5888UV III
New Model #3955: Alinco DR-B185HT
New Model #4011: Klein electronics Blackbox+ series
New Model #4013: Icom IC-7300
New Model #4043: Kenwood TK760G-1 and Kenwood TK-7160E are suppurted?? they i think the EU-Models??
New Model #4075: Puxing PX-UV9R
New Model #4103: Zastone ZT-D9000
New Model #4207: Baofeng DM-5R Plus
New Model #4227: Zastone MP-600
New Model #4263: VGC VR-6600PRO and BTech UV-50X3 the same radio
New Model #4291: TYT DP-290 DPMR
New Model #4299: Crony CN810
New Model #4327: Yeasu FT-2600M Support
New Model #4399: Baofeng UV-5RTP, incorrect model
New Model #4445: When using the BF-F8HP driver for Baofeng GT-3TP Mk III, I get 'Incorrect 'Model' selected'
New Model #4505: Baofeng Mini One, UV-6D
New Model #4511: Baofeng UV-9R
New Model #4515: Yaesu FT1XD
New Model #4517: Yaesu FTM-3100R
New Model #4523: Baofeng uv-9
New Model #4533: Baofeng/Pofung DM-5R Plus
New Model #4603: TYT DM UVF10
New Model #4605: Icom V8000
New Model #4615: Ahuago AW-470
New Model #4669: Wouxun KG-819, KG-829
New Model #4691: Zastone ZT-D9000
New Model #4693: TDXone TD-Q3
New Model #4723: Baofeng GT-5TP
New Model #4761: Baofeng BF-D55
New Model #4767: Kenwood TK-3101
New Model #4805: Icom IC V8000 Radio
New Model #4813: Alinco DJ-G7T
New Model #4831: Luiton LT-925UV
New Model #4835: Baofeng BF-888S Plus
New Model #4853: Puxing PX-888
New Model #4867: Baofeng 239 or D-55
New Model #4869: Baojie BJ-218
New Model #4897: Icom IC-R6
New Model #4899: Baofeng GT-5TP
New Model #4901: Anytone At-778UV
New Model #4907: Anysecu DM-960
New Model #4929: Kenwood TK-350 & TK-250
New Model #4947: Alinco DJ-500T
New Model #4997: Anytone At-778UV
New Model #5041: Hesenate HX-UV88
New Model #5053: Support for MML (aka Veasu or Higrade) UV-8DR
New Model #5055: Yaesu FT-891
New Model #5069: Wouxun KG-UV9D
New Model #5083: Radioddity GD-77
New Model #5091: Zastone ZT-A18
New Model #5109: Radioddity R1 (minor change)
New Model #5113: TDXone TD-6P
New Model #5123: Wouxun KG-UV8D Plus
New Model #5125: Zastone Mini9 !
New Model #5129: Yaesu FTM-3100R
New Model #5135: Radioddity QB25
New Model #5143: QYT KT-980 Plus
New Model #5161: Zastone UV-8DR (Veasu UV-8DR, Higrade UV-8DR, MML UV-8DR)
New Model #5163: Veasu / Zastone / MML / Higrade UV-8DR
New Model #5173: Kenwood TK-2312-1
New Model #5179: Yaesu FT-8500
New Model #5185: Yaesu FT-100D
New Model #5197: Xiegu CS108G+
New Model #5203: Zastone ZT-V9+ (aka: Nanofone NF-669)
New Model #5225: Olywiz radios (unspecified)
New Model #5231: QYT KT-7900D ID and MCU
New Model #5253: Baofeng BF-999S all black version
New Model #5259: ANYTONE AT-778UV
New Model #5283: Radioddity GD-77 DMR
New Model #5287: TYT Tytera MD-380 MD-390 DMR
New Model #5295: Icom IC-9100
New Model #5297: ICOM IC-M802
New Model #5301: IC-T81A
New Model #5303: Alinco DJ-V27
New Model #5305: Kenwood TK-250/350
New Model #5329: Yaesu FT-70DR
New Model #5331: Baofeng R760
New Model #5347: Anytone AT-778UV
New Model #5365: Rugged Radio RM25R (related to QYT KT-8900, Waccom Mini-8900)
New Model #5377: Retevis RT82
New Model #5397: BAOFENG GT3-DMR MARK IV
New Model #5403: Baofeng UV-8D
New Model #5421: Icom IC-F1010
New Model #5433: Baofeng UV-8D
New Model #5435: ID-51A Plus (Anniversary edition)
New Model #5443: LEIXEN VV-898S 25W V1.08
New Model #5449: Luiton LT-590
New Model #5451: Yaesu FT-2980R
New Model #5453: Bendix King Radios Request
New Model #5507: Anytone AT-588 V2
New Model #5511: QYT KT780+
New Model #5531: ID-51A plus2
New Model #5539: Baofeng UV-5S
New Model #5547: Bailingtong BLT-92N
New Model #5549: Bouhui 880 (?) and Baofeng BF-888S
New Model #5551: Wouxun KG-UV66
New Model #5559: Icom IC-910H
New Model #5561: Midland G18
New Model #5571: Sainsonic GT-3TP
New Model #5573: Yaesu FT2
New Model #5599: Radio Shack PRO-649 Scanner
New Model #5605: Baofeng UVB2
New Model #5609: Anytone 778UV
New Model #5649: Helida T-M2D
New Model #5659: midland
New Model #5675: Hysera HYS TC-MAUV11
New Model #5677: QYT 780plus
New Model #5681: Zastone V10 HT
New Model #5687: Baofeng BF-230 pro
New Model #5705: Icom IC-207H
New Model #5711: Baofeng BF-999s Plus (KS-317)
New Model #5737: TIDRADIO TD-M8
New Model #5741: ICOM IC-R10
New Model #5747: Yaesu FT818ND - programming memories using Chirp
New Model #5765: Zastone V77
New Model #5767: Tytera TYT MD-380
New Model #5789: Yaesu 818
New Model #5795: E-Tech Iris IP60
New Model #5807: KG-UV6D - 4m / 2m
New Model #5815: Lseng T-328
New Model #5823: Belfone BF-TD503 / BFDX BF-TD503 / Luiton DG-TD503
New Model #5827: FJX FZ-V5
New Model #5843: Seniton (Hesenate) ST-260
New Model #5885: Baofeng uv-8d
New Model #5899: Baofeng A-52 II
New Model #5903: Zastone Mini 8
New Model #5911: REQ PROGRAMMING ASSISTANCE ON NEW MODELS
New Model #5923: Quansheng UV-R50
New Model #5931: Quansheng UV-R50
New Model #6003: Retevis RT95 aka Anytone AT778UV
New Model #6049: Baofeng UV-7R
New Model #6051: RCA Br250u
New Model #6077: BaoFeng uv5r3band
New Model #6113: Baofeng BF-UV8D
New Model #6119: Yaesu FTM-3207D
New Model #6121: Baofeng BF-88E (same programming as for the BF-888S)
New Model #6153: Yaesu FT-4XR
New Model #6179: Alinco DJ-MD5
New Model #6193: Retevis RT24 support (as Radioddity R2 variant)
New Model #6209: Icom IC-V90
New Model #6211: CRT-279UV (clone of QYT KT7900D)
New Model #6229: Add support for Kenwood TS-850
New Model #6235: Baojie BJ-318
New Model #6243: Baojie BJ-318
New Model #6253: Support for Radioditty GD-77
New Model #6257: Baofeng BF-R5 Mini
New Model #6263: Baofeng BF-658
New Model #6269: Retevis 9000D 220 Mobile Radio
New Model #6273: BaoFeng U-8S
New Model #6281: TYT TH-UV8200
New Model #6291: Kenwood NX-320
New Model #6297: Yaesu FTM-100DE
New Model #6305: TYT MD-380
New Model #6317: Anytone AT-5888UV III TriBand
New Model #6321: Dynascan P-72
New Model #6323: Icom IC-A25NE
New Model #6335: Helida T-M2D
New Model #6349: Zastone ZT-889G
New Model #6353: Jingtong JT-5988 (HP)
New Model #6367: Connect Systems CS-800D
New Model #6373: Jaimpai / Zastone / Veasu UV-8DR
New Model #6375: PLEASE ADD SUPPORT FOR KENWOOD NX-320
New Model #6395: Zastone D9000 ?
New Model #6407: Uniden BC75XLT
New Model #6413: programing for icom ic-v80 handheld
New Model #6425: Retevis RT95
New Model #6429: Quansheng UV-R50 2nd Gen
New Model #6441: Baofeng Radio UV-5R MK5 8W 2019 Mirkit Edition
New Model #6447: Zastone ZT-889G and uv-6
New Model #6491: Baofeng UV-5RTP
New Model #6493: Add QYT KT-5800 as a variant of QYT KT-8900D (dual band)
New Model #6495: Baofeng DM-1701 DMR
New Model #6505: Icom IC-F621-2
New Model #6507: KSUN X-UV68D MAX
New Model #6511: Yaesu FTM-100D
New Model #6521: Alinco DJ-V446
New Model #6525: Yaesu FTM-7250
New Model #6527: Yanton T-650UV (Zastone ZT-A10)
New Model #6569: Zastone UV-8DR
New Model #6571: Baofeng BF-R5 Mini
New Model #6589: Yaesu FTM-7250DE
New Model #6645: Kenwood TK-F8
New Model #6659: Hesenate HT-UV8R
New Model #6665: Alinco DJ-500 support
New Model #6669: Baofeng UV-7R
New Model #6685: Support for Yaesu FT-991A
New Model #6699: TYT MD2017 (Same as Retevis RT82)
New Model #6701: TYT MD-9600 (= Retevis RT90)
New Model #6707: Icom IC-E90
New Model #6709: Wouxun KG-699E
New Model #6713: Kenwood TK-7360
New Model #6715: AnyTone AT-778UV
New Model #6721: Icom IC-T90A
New Model #6739: Zastone Z-218
New Model #6769: Retevis RT87
New Model #6775: offer of radio for chirp support
New Model #6781: Add support for BTech GMRS-50X1 mobile radio
New Model #6787: Midland DBR2500
New Model #6801: Alinco DJ-G7T
New Model #6819: Retevis RT3s
New Model #6823: Vero Telecom VR-F90
New Model #6827: UV-82 Mirkit
New Model #6839: Icom IC-T2A VHF
New Model #6841: Icom IC-T2A
New Model #6843: QYT KT-8R
New Model #6847: Baofeng UV-S9 144/220/440 tri-band
New Model #6855: Retevis RT-15 UHF
New Model #6895: Wouxun KG-UV9K
New Model #6899: Sainsonic AP510
New Model #6901: Abbree AR-889G
New Model #6903: Zastone A28
New Model #6915: zastone d9000
New Model #6923: Kenwood TK840
New Model #6929: Tera TR-590
New Model #6935: Zastone ZT-99
New Model #6941: Baofeng BF-UVS9+
New Model #6961: Baofeng DM-1701
New Model #6977: Support Tenway TW-325 and UV-5R Pro
New Model #6985: QYT KT-8R
New Model #6993: Yaesu FT-250R
New Model #7007: Tera TR-505
New Model #7033: QYT KT-7900D - new firmware version VC4264
New Model #7035: Yaesu FTM 7250 DE/DR
New Model #7043: Retevis RT-47
New Model #7049: Please ADD BAOJIE BJ-318
New Model #7065: ABBREE AR-F8
New Model #7077: Need driver for Kenwood TS-590 HF Rig
New Model #7079: Need driver for Kenwood TS-480 HF Rig
New Model #7089: Abbree AR-889G
New Model #7109: Iradio I-9DUH
New Model #7127: Baofeng DM-1801 DMR
New Model #7135: Yaesu FT-450 (not FT-450D)
New Model #7143: Yaesu FT3DR
New Model #7151: TYT TH8600
New Model #7155: Luthor TLM-909 (TYT TH-9800 clone with slightly different ID sequence)
New Model #7163: [BF-A58S] Add Support for Baofeng UV-82III
New Model #7175: Baofeng DM-1701
New Model #7177: Wouxun KG-UV9D (Plus)
New Model #7179: Retevis RT22S
New Model #7197: motorola radios
New Model #7209: ABBREE AR-F8
New Model #7215: Baofeng BF-M4
New Model #7223: Wouxun KG-UV980P
New Model #7231: Icom IC-V86
New Model #7259: Adding Yaesu FT4x IMAGE for use
New Model #7265: Woyxun KG-UV9K
New Model #7281: Kenwood TK-3201 Pro Talk
New Model #7291: Baojie BJ-318
New Model #7327: Alinco DX-SR8T
New Model #7387: Yaesu FT-4VR
New Model #7437: Yaesu FTM-3207D
New Model #7447: Ksun X-30TFSI
New Model #7483: Vertex Standard EVX-534
New Model #7501: Baofeng BF-UVF10
New Model #7507: Add Asian version of Yaesu FT-65R please
New Model #7509: Baofeng BF-UVF10
New Model #7511: Add Support TYT TH UV8200
New Model #7513: Anytone 778UV Dual Band
New Model #7519: Kydera KD-200UV
New Model #7521: Anytone AT-D578UVIII Pro
New Model #7523: Puxing PX-UV973
New Model #7531: WLN KD-C1 Plus
New Model #7543: Yaesu FT-25R
New Model #7555: Cannot clone FT-450 (NON-D model)
New Model #7559: Yaesu FTM-400
New Model #7567: Puxing model R9
New Model #7573: Programation du Baofeng BF-R3
New Model #7575: Baofeng UV-9X PLUS
New Model #7577: Bendix King EMV 499 0A
New Model #7579: Bendix King EMH 599 2X
New Model #7581: Bendix King EPU 499 1A
New Model #7583: Bendix King MPH 514 2A
New Model #7587: Bendix King LPI
New Model #7589: Abbree AR-F8
New Model #7591: Programation du Baofeng BF-R3
New Model #7593: Programation du Baofeng BF-R3
New Model #7599: Vertex & Vertex-Standard, e.g. FTL-1011, FTL-2011, FTL-7011
New Model #7613: QYT KT-8R
New Model #7623: Baofeng BF-V9
New Model #7665: Wouxun KG-UV9K
New Model #7669: dynascan db-9900m
New Model #7675: TYT TH-UVF8
New Model #7677: Anytone AT-878UV Plus
New Model #7679: Please add support for DM-5R
New Model #7687: TYT MD-UV380
New Model #7689: Baofeng BF-T12
New Model #7711: QYT KT-8R not in CHIRP
New Model #7713: Alinco DX-SR8
New Model #7757: Wouxun KG-UV980P
New Model #7763: Icom ID-51E Plus2
New Model #7781: Wouxun KG-805
New Model #7791: Radioddity GA-510 (BF-H6?)
New Model #7817: TYT TH-UV88
New Model #7831: Wouxun KG-UVA1
New Model #7855: Olywiz UV6S
New Model #7879: Baofeng/Pofung DM-5R Plus
New Model #7887: CRT Micron UV
New Model #7889: CRT Apollo 2000H
New Model #7971: Icom IC-F31GT-1
New Model #7985: Quansheng TG-93A
New Model #7987: Yaesu FT-991A
New Model #8033: ICOM IC-70DS
New Model #8041: ASIMOTON AS-9900 - Radio did not enter clone mode
New Model #8073: Baojie BJ-318
New Model #8087: Retevis RT27
New Model #8105: Kenwood TK-859
New Model #8115: Baofeng UV-62
New Model #8123: Retevis RT68 / RT668 support
New Model #8129: YAESU FTM-300DR
New Model #8135: Kydera DR-360
New Model #8137: Leixen UV-25D
New Model #8143: Rugged Radio RH5R-V3
New Model #8173: Rugged Radios RH5R-V3
New Model #8187: New Model TechSide TI-F8+
New Model #8213: Rugged Radios RH16C-U (Rebadged TYT X1U)
New Model #8239: Leixen UV-25D
New Model #8263: Baofeng BF-U9
New Model #8267: SFE S820, SFE S890+
New Model #8279: Baofeng CH-6DMR
New Model #8309: TCA AN/PRC-152 (Harris AN/PRC-152 clone)
New Model #8313: Baofeng BF-H7
New Model #8317: QYT KT-9800+
New Model #8329: Yaesu FT-847
New Model #8333: New Model TechSide TS-T2
New Model #8379: Wouxun KG-833
New Model #8397: Anytone AT-6666
New Model #8427: Kenwood TK-2000
New Model #8431: ICOM IC-705
New Model #8489: Yaesu FTM-300D
New Model #8497: TYT TH UV88
New Model #8507: Icom IC-V85
New Model #8531: Retevis RB-15 / RB-615
New Model #8551: Baofeng BF-1901
New Model #8553: Anytone AT-D878UV+
New Model #8565: [H777] Add Support for Retevis H777/H777 Plus (FRS/PMR) Models
New Model #8573: Unrecognized model variation (03). No memory map for it - Wouxun KG-UV9D Plus (Upgrade Version)
New Model #8575: Retevis RT85
New Model #8591: Quansheng TG-UV2 Plus
New Model #8651: Olywiz UV6S
New Model #8661: Retevis RB26
New Model #8681: Retevis RT76P
New Model #8719: Yaesu FTM-100D
New Model #8783: Kenwood TK-3402U
New Model #8803: Wouxun KG-UV8H
New Model #8839: Baofeng BF-X9
New Model #8859: Anytone 778UV (VOX) 3.00 version
New Model #8883: Kenwood TK-3180E
New Model #8885: Alinco DR-735T
New Model #8889: Wouxun kg-uv9d MATE
New Model #8927: Yaesu FT-2600
New Model #8941: Zastone UV-8DR
New Model #8957: Retevis RB17A
New Model #8959: Retevis RT76
New Model #9017: Yaesu FTM-400XDR/DE
New Model #9073: Yaesu FT-991A
New Model #9077: Add Baofeng GT-5R
New Model #9091: Midland CT890
New Model #9129: Rugged Radios RM25R
New Model #9171: TYT TH-8600
New Model #9181: Add Retevis RT98 Single Band Mini Mobile Radio
New Model #9185: CRT Micron UV V2
New Model #9217: Retevis RB618
New Model #9235: Baofeng UV-5G
New Model #9241: Radioddity DB20-G
New Model #9245: TYT MD380 Programming in CHIRP
New Model #9261: Alinco DJ-500T/500TB support request
New Model #9287: KST K6900 clone of another radio?
New Model #9325: Ailunce HD1 support
New Model #9363: Support for Wouxun KG-UV920P-A and KG-UV980P
New Model #9407: Radioddity DB25-G
New Model #9413: Baofeng BF-M2
New Model #9453: TechSide TS-T9+
New Model #9489: Wouxun KG-935G
New Model #9521: ZASTONE D900
New Model #9529: Baofeng UV-XR
New Model #9537: Yaesu FTL-2001, 2007, 7002, 7007
New Model #9559: Retevis RB18

chirp-py3

CHIRP from the py3 branch

63%

12 closed (60%)   8 open (40%)

Related issues
Bug #7809: Embedded Message on WLN KD-C1 (Variant of Retevis RT22)
Bug #7923: python3 support
Bug #7989: Support for Python 3
Bug #8475: Python3 Syntax errors
Bug #8545: Python 3 Syntax Errors in Driver Files
Bug #8547: Drivers Depend on Missing Module: wouxun_common
Bug #8549: string.uppercase no longer exists in Python 3
Bug #8613: Driver Maintenance: baofeng_common.py
Bug #9299: Py3: run_tests.py syntax error
Bug #9371: Add "Open Recent" menu to "File" menu in PY3 branch
Bug #9395: Replace deprecated use of Append to AppendSubMenu
Bug #9449: Replace deprecated GetLabel with wxPython GetItemLabelText
Bug #9555: python 3 branch syntax errors
Feature #2287: Wouxun KG-UV8D priority channel
Feature #7431: Python3-friendly UI based on wxPython
Feature #9379: Make "Open" in "File" menu work with last_dir in chirp.config PY3
Feature #9403: Add "Open Stock Config" submenu to "File" menu PY3
New Model #4129: Kenwood TH-D74A
New Model #7981: HAZEM-HOSNY
New Model #8491: Baofeng BF-T12