Version 24 (Dan Smith, 03/31/2013 10:23 am)

1 1 Dan Smith
h1. Frequently Asked Questions
2 1 Dan Smith
3 1 Dan Smith
4 1 Dan Smith
5 12 Dan Smith
h2. General use
6 12 Dan Smith
7 12 Dan Smith
h3. What is it?
8 12 Dan Smith
9 12 Dan Smith
CHIRP is a FREE cross-platform, cross-radio programming tool. It works on Windows and Linux (and MacOSX with a little work). It supports a growing list of radios across several manufacturers and allows transferring of memory contents between them.  The current list of supported models is:
10 12 Dan Smith
11 17 Dan Smith
h3. Is my radio supported?
12 17 Dan Smith
13 18 Dan Smith
If it's listed on the [[Wiki|front page]], then it is. If it is not listed, then it is not supported. If you're interested in getting support added, please see [[FAQ#How-can-I-get-my-radio-supported-by-CHIRP|How can I get my radio supported by CHIRP]]
14 17 Dan Smith
15 13 Dan Smith
h3. Will this replace the OEM software?
16 12 Dan Smith
17 12 Dan Smith
Maybe. CHIRP's focus is to support reading and writing the memory channels of as many radio models as possible. This provides the ability to exchange your programming information between dissimilar radios. It does not focus on supporting every single knob and setting that each radio supports. Doing so would severely limit the amount of developer time available to supporting a wider-range of models.
18 12 Dan Smith
19 12 Dan Smith
h3. How do I program split TX/RX configurations?
20 12 Dan Smith
21 12 Dan Smith
If your radio supports it, you can choose _split_ in the _Duplex_ column. This causes chirp to treat the _Offset_ column as the transmit frequency. In such a configuration you could, for example, receive (_Frequency_ column) on 146.52MHz and transmit (_Offset_ column) on 446.00MHz.
22 12 Dan Smith
23 12 Dan Smith
h3. What are "stock configurations"?
24 12 Dan Smith
25 12 Dan Smith
These are canned frequency plans, some of which are built into chirp. These include standard US calling frequencies, the channelized 60m frequencies, etc. They can easily be opened or imported into your radio from the _File_ and _Radio_ menus.
26 12 Dan Smith
27 12 Dan Smith
h3. Can I add new stock configurations?
28 12 Dan Smith
29 12 Dan Smith
Yes! Adding your group's frequency plan to the stock configurations can make it very quick and easy to program new radios. Further, putting various configurations into the stock list can make switching your radio between multiple functions or geographical regions easy. Simply save a CSV file into the stock configurations directory and restart CHIRP to have it show up in the list. On windows, go to _Start_ -> _Run_ and type:
30 12 Dan Smith
31 12 Dan Smith
32 12 Dan Smith
33 12 Dan Smith
On MacOS or Linux, the path is:
34 12 Dan Smith
35 12 Dan Smith
36 12 Dan Smith
37 14 Dan Smith
h3. Why can't I upload my CSV file?
38 14 Dan Smith
39 14 Dan Smith
CSV files are generic and not specific to any one radio. Your radio needs an exact copy of its memory to be uploaded to it, and will not accept CSV data. So, you must first download a copy of your radio's contents, modify them in some way, and then upload those contents back to the radio. In order to get CSV data into your radio, you should download, import the CSV file, and then upload back to the radio. See the [[Beginners_Guide]] for more information.
40 12 Dan Smith
41 19 Dan Smith
h3. I get "application configuration is incorrect" when I try to run CHIRP
42 19 Dan Smith
43 19 Dan Smith
The full error message as seen by the user is: "Application cannot run because application configuration is incorrect"
44 15 Dan Smith
45 22 Dan Smith
This is a problem with your Windows XP machine and its standard libraries. Most users seem to be able to resolve this issue by downloading the "Microsoft Visual C++ 2008 SP1 Redistributable Package":http://www.microsoft.com/en-us/download/confirmation.aspx?id=5582.
46 22 Dan Smith
47 22 Dan Smith
If the above does not help you, Google for this error message and you will find many such problem reports with myriad other applications, as well as suggested fixes, depending on what the root cause of your problem is.
48 15 Dan Smith
49 16 Dan Smith
h3. Can I adjust the port settings for improved communications reliability?
50 16 Dan Smith
51 16 Dan Smith
No, this is a common misconception. Please refer to this more detailed page on the topic: [[FAQ_Adjusting_The_Serial_Port_Settings_In_Windows]]
52 16 Dan Smith
53 1 Dan Smith
h2. Cables
54 1 Dan Smith
55 1 Dan Smith
h3. What kind of cable do I need?
56 1 Dan Smith
57 3 Dan Smith
Usually the cable supplied by your radio manufacturer is the highest quality cable you can find. However, it's usually also the most expensive, and is often bundled with software which you may not want or need. There are many 3rd party cables available and they should all work just fine for the most part. Check eBay and "KawaMall":http://www.kawamall.com for cables. Also check the [[CableGuide]] page, which has details about potential pitfalls and some information about cables that are compatible with multiple radios.
58 1 Dan Smith
59 8 Dan Smith
When shopping on eBay, look for the sellers that are regular merchants, and that have fixed price items and full stores of merchandise.  Here are some recommended common cables:
60 8 Dan Smith
61 8 Dan Smith
    * "Yaesu VX-7R cable":http://stores.ebay.com/KAWAMALL-RAD/Other-/_i.html?_nkw=vx7+cable&submit=Search&_fsub=1&_sid=55765193 (works for VX-6R, ICOM IC-Q7A) - $18
62 8 Dan Smith
    * "Yaesu VX-8R/DR cable":http://stores.ebay.com/KAWAMALL-RAD/Other-/_i.html?_nkw=vx8+cable&submit=Search&_fsub=1&_sid=55765193 - $23
63 8 Dan Smith
    * "Yaesu FT-7800 cable":http://shop.ebay.com/i.html?_nkw=yaesu+7800+programming+cable&_sacat=0&_odkw=yaesu+7800+cable&_osacat=0&_trksid=p3286.c0.m270.l1313 (works for 7900, 8800, 8900, etc) - $14
64 8 Dan Smith
    * "OPC-478 clone cable":http://stores.ebay.com/KAWAMALL-RAD/Other-/_i.html?_nkw=opc-478&submit=Search&_fsub=1&_sid=55765193 (most ICOM, some Alinco radios) - $14
65 8 Dan Smith
66 8 Dan Smith
Check "KawaMall":http://stores.ebay.com/KAWAMALL-RAD and "Valley Enterprises":http://stores.ebay.com/Valley-Enterprises for other options. See the [[CableGuide]] for more information about which cable to use for your radio.
67 8 Dan Smith
68 1 Dan Smith
h3. What if my computer does not have a serial port?
69 1 Dan Smith
70 1 Dan Smith
For the most part, USB-to-Serial adapters work without problems. These attach to a USB port and create a virtual serial port that software can use as if it was a regular port. Some adapters are very poor quality and can cause you issues, so if you are experiencing difficulty, you may want to try a different one.
71 1 Dan Smith
72 1 Dan Smith
Without a doubt, the highest quality (and most expensive) adapters come from KeySpan, but you may find that it is worth the money for quality.
73 1 Dan Smith
74 1 Dan Smith
On Windows, determine the COM port that is assigned to the adapter by going into _Device Manager_ and looking under _Ports_.
75 1 Dan Smith
76 4 Dan Smith
h3. Can I use a USB cable?
77 2 Dan Smith
78 2 Dan Smith
Typically, yes. These cables simply have a USB-to-Serial adapter integrated into the cable itself, and are easier to manage and hook up. Follow the same procedures as if you were using a separate adapter.
79 2 Dan Smith
80 2 Dan Smith
*NOTE:* Recently, RTSystems has been selling "Version 4" of their software with a "New USB Cable". It appears that they have specifically designed the cable to be incompatible with other software packages. Beware that if you bought this "new" cable from them you may be unable to use it with CHIRP!
81 2 Dan Smith
82 1 Dan Smith
h3. What if I need to use a COM port other than what is in CHIRP's list?
83 1 Dan Smith
84 1 Dan Smith
You can type anything into the box you need, so if your adapter is assigned to (for example) port 15, simply type +COM15+ into the box and you should be off and running.
85 4 Dan Smith
86 1 Dan Smith
h2. Transferring data between radios
87 7 Dan Smith
88 7 Dan Smith
h3. I have two different radios, how do I transfer data between them?
89 7 Dan Smith
90 7 Dan Smith
CHIRP provides the ability to transfer data between incompatible radios by means of the +Import+ and +Export+ functions. For example, if you have opened a Yaesu VX-8 in CHIRP, you can use the +Import+ function and specify an image from an Icom 2820. A dialog box will open asking you which of the memories from the Icom 2820 you want to import into your VX-8. When the import is complete, you can upload the result to your VX-8. See the [[Beginners_Guide]] for more details about this process.
91 5 Dan Smith
92 5 Dan Smith
h2. Connecting with your radio
93 5 Dan Smith
94 5 Dan Smith
h3. Should I put my Alinco, Icom, or Kenwood radio into clone mode first?
95 5 Dan Smith
96 5 Dan Smith
No, these radios are well-designed and allow the software to place them into clone mode automatically. This is far more reliable than manipulating the radio by hand and synchronizing the software. Simply plug in your programming cable, power on the radio, and instruct CHIRP to read it.
97 5 Dan Smith
98 6 Dan Smith
h3. Should I put my Yaesu radio into clone mode first?
99 5 Dan Smith
100 6 Dan Smith
Yes, Yaesu radios do not respond to commands over the serial port and must be manually manipulated. Start CHIRP with the cable plugged in and the radio in the intermediate clone mode (usually entered by powering the radio on with one or more buttons pressed). When downloading from the radio, put CHIRP into download mode (where it is waiting on the radio) before initiating the clone out from the radio. When uploading, put the radio into clone receive (or clone wait) mode before initiating the upload from CHIRP.
101 5 Dan Smith
102 6 Dan Smith
h3. What is a live radio?
103 5 Dan Smith
104 5 Dan Smith
Most of the radios supported by CHIRP are programmed by downloading an entire "image" or "snapshot" of the radio's memory, manipulating it, and then uploading it back to the radio. These are called "clone-mode radios". Live mode radios instead communicate with the computer by sending and receiving individual memories one at a time. That means that when you use CHIRP to program them, changes are sent to the radio immediately instead of held until an upload.
105 1 Dan Smith
106 10 Dan Smith
h2. Giving or Getting Help
107 4 Dan Smith
108 21 Dan Smith
If you have a question about anything, please join the CHIRP "mailing list":http://intrepid.danplanet.com/mailman/listinfo/chirp_users and ask your question there. Please do not contact the author or developers directly!
109 8 Dan Smith
110 8 Dan Smith
The mailing list has the latest discussion traffic and news about CHIRP.
111 8 Dan Smith
112 11 Dan Smith
h3. Can I report a bug or request a feature?
113 8 Dan Smith
114 11 Dan Smith
Have you found a bug or do you have a good idea for a future release? Please help out by reporting it! The "issue tracker":/projects/chirp/issues provides a way for users to report bugs, generic issues, and request features. Please read [[How_To_Report_Issues|How to report issues]] first!
115 10 Dan Smith
116 10 Dan Smith
h3. Can I help?
117 1 Dan Smith
118 10 Dan Smith
If you are developer, please see the [[Developers]] page for details on how you can contribute. If you're not a developer, but are good at breaking things, then please file bugs and submit reports.  If you can write documentation, please volunteer to help with that as well. Many folks have loaned their radios for the purposes of getting support for them added to CHIRP. Please see the [[Honor_Roll|Honor Roll]] for that list of people and be sure to thank them if their generosity resulted in support for a model you use!
119 10 Dan Smith
120 21 Dan Smith
If you are multi-lingual, please consider translating CHIRP into another language. No developer skills are required for this and it helps make CHIRP accessible to more people around the world. If you are interested in helping with this, please "open a new issue":http://chirp.danplanet.com/projects/chirp/issues/new for the translation and a developer will contact you with more details.
121 10 Dan Smith
122 10 Dan Smith
h3. Can I donate some money?
123 10 Dan Smith
124 10 Dan Smith
Of course, developing and maintaining the CHIRP software and website is not free. Monetary donations are always appreciated and can be made via the "Donate" link on the [[download|download]] page. These donations go towards hosting costs of the website, as well as to purchasing new radios, programming cables, etc. for the furtherance of the software.
125 10 Dan Smith
126 10 Dan Smith
h3. How can I get my radio supported by CHIRP?
127 10 Dan Smith
128 20 Dan Smith
In order to add support for a new radio model to CHIRP, a developer needs to reverse engineer the clone protocol and memory format of the radio.  This can often be done in a relatively short period of time, but requires physical access to the radio itself.
129 20 Dan Smith
130 20 Dan Smith
If you're interested in loaning your radio for this process, please follow these steps:
131 20 Dan Smith
132 20 Dan Smith
# Look at the [[Wiki|front page]] to make /sure/ that it is not already supported
133 20 Dan Smith
# Look at the current set of "new model requests":http://chirp.danplanet.com/projects/chirp/issues?query_id=9 to see if it has already been requested. If it has, do *not* open another issue, but feel free to post comments and pledges to help in that item
134 20 Dan Smith
# If neither of the above applies, then open a "new request":http://chirp.danplanet.com/projects/chirp/issues/new
135 23 Dan Smith
136 23 Dan Smith
h2. Using the Mailing List
137 23 Dan Smith
138 23 Dan Smith
h3. Should I subscribe from my arrl.net address?
139 23 Dan Smith
140 23 Dan Smith
Only if you send from that address too. If your N0CAL@arrl.net address forwards to foo@bar.com and you send from foo@bar.com, the mailing list server will reject emails you send because it thinks you are not subscribed. Subscribe with whatever email address you are going to _send_ from.
141 23 Dan Smith
142 24 Dan Smith
h3. Why was my mail to the list rejected as a non-member post?
143 24 Dan Smith
144 24 Dan Smith
See the answer to the question above. If you send an email to the list from an address other than the one you subscribed from, the list will reject your post. Please re-subscribe the proper address or change the address you are sending from.
145 24 Dan Smith
146 23 Dan Smith
h3. How do I unsubscribe?
147 23 Dan Smith
148 23 Dan Smith
Every email you receive from the list contains a few links at the bottom that allow you to manage your email delivery preferences, including removing yourself from the list. For reference, that link takes you "here":http://intrepid.danplanet.com/mailman/listinfo/chirp_users. Please *do not email the list or list owner asking to be unsubscribed*.
149 23 Dan Smith
150 23 Dan Smith
h3. How do I change my email delivery preferences?
151 23 Dan Smith
152 23 Dan Smith
Please see the answer above about unsubscribing.