General

Profile

David Berten

  • Registered on: 10/28/2015
  • Last connection: 11/02/2015

Issues

open closed Total
Assigned issues 0 0 0
Reported issues 0 1 1

Activity

11/04/2015

03:11 PM CHIRP Bug #1735: Yaesu VX-8DR - Frequencies programmed with chirp have frequency offset in TX/TR
Jim, I had someone new to radio helping me test. So, I'm not sure I got the best feedback. I could try again. David Berten
08:10 AM CHIRP Bug #1735: Yaesu VX-8DR - Frequencies programmed with chirp have frequency offset in TX/TR
Jim, I loaded the image from my Mac and tested 2-6. All of the channels seemed okay except 5. We spent a bit of time ... David Berten

11/02/2015

08:03 PM CHIRP Bug #1735: Yaesu VX-8DR - Frequencies programmed with chirp have frequency offset in TX/TR
Hi Jim, I can only reach repeaters on channels 2,5,7 & 8. Which ones do you want me to test? David Berten
01:30 PM CHIRP Bug #1735: Yaesu VX-8DR - Frequencies programmed with chirp have frequency offset in TX/TR
The vx8 backup has the off frequency issues on 2m with negative offsets. Possible on all repeaters too. The programme... David Berten
01:23 PM CHIRP Bug #1735: Yaesu VX-8DR - Frequencies programmed with chirp have frequency offset in TX/TR
I was able to load that file, but testing it will be difficult. I've been dealing with this for many months. People h... David Berten

10/31/2015

09:36 AM CHIRP Bug #1735: Yaesu VX-8DR - Frequencies programmed with chirp have frequency offset in TX/TR
Hi Jim, Channel 8 is the only channel that was programmed from the VX-8DR keypad. Channel 8 works with no distortion.... David Berten

10/30/2015

05:44 PM CHIRP Bug #1735: Yaesu VX-8DR - Frequencies programmed with chirp have frequency offset in TX/TR
That's the problem, it is bang on, it shows up correctly on the Chirp software and on the VX-8DR itself. Somehow behi... David Berten
10:04 AM CHIRP Bug #1735: Yaesu VX-8DR - Frequencies programmed with chirp have frequency offset in TX/TR
I've attached a file from my CHIRP. Channel 8 is good, Channel 48 has the issue.
It has a lot of other channels in...
David Berten

10/29/2015

05:18 PM CHIRP Bug #2959 (Rejected): Yaesu VX-8DR off frequency after programming
I sent my radio back to Yaesu twice until they figured out what was happening. I found on negative offsets when talki... David Berten

10/28/2015

01:09 PM CHIRP Bug #1735: Yaesu VX-8DR - Frequencies programmed with chirp have frequency offset in TX/TR
I can confirm this, and it still occurs with the latest update. I found it happening on frequencies with a - (negativ... David Berten

Also available in: Atom