|
# Copyright 2023:
|
|
# * Sander van der Wel, <svdwel@icloud.com>
|
|
#
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 2 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
import logging
|
|
|
|
from chirp.drivers import baofeng_common
|
|
from chirp import chirp_common, directory, memmap
|
|
from chirp import bitwise
|
|
from chirp.settings import RadioSetting, \
|
|
RadioSettingValueBoolean, RadioSettingValueList, \
|
|
RadioSettingValueString, RadioSettingValueInteger, \
|
|
RadioSettings, RadioSettingGroup, \
|
|
InvalidValueError
|
|
import struct
|
|
from chirp import errors, util
|
|
|
|
LOG = logging.getLogger(__name__)
|
|
|
|
# Baofeng UV-17L magic string
|
|
MSTRING_UV17L = b"PROGRAMBFNORMALU"
|
|
MSTRING_UV17PROGPS = b"PROGRAMCOLORPROU"
|
|
|
|
DTMF_CHARS = "0123456789 *#ABCD"
|
|
STEPS = [2.5, 5.0, 6.25, 10.0, 12.5, 20.0, 25.0, 50.0]
|
|
|
|
LIST_AB = ["A", "B"]
|
|
LIST_ALMOD = ["Site", "Tone", "Code"]
|
|
LIST_BANDWIDTH = ["Wide", "Narrow"]
|
|
LIST_COLOR = ["Off", "Blue", "Orange", "Purple"]
|
|
LIST_DTMFSPEED = ["%s ms" % x for x in [50, 100, 200, 300, 500]]
|
|
LIST_HANGUPTIME = ["%s s" % x for x in [3, 4, 5, 6, 7, 8, 9, 10]]
|
|
LIST_SIDE_TONE = ["Off", "Side Key", "ID", "Side + ID"]
|
|
LIST_DTMFST = ["Off", "DT-ST", "ANI-ST", "DT+ANI"]
|
|
LIST_MODE = ["Name", "Frequency", "Channel Number"]
|
|
LIST_OFF1TO5 = ["Off"] + list("12345")
|
|
LIST_OFF1TO9 = LIST_OFF1TO5 + list("6789")
|
|
LIST_OFF1TO10 = LIST_OFF1TO9 + ["10"]
|
|
LIST_OFFAB = ["Off"] + LIST_AB
|
|
LIST_RESUME = ["TO", "CO", "SE"]
|
|
LIST_PONMSG = ["Full", "Message"]
|
|
LIST_PTTID = ["Off", "BOT", "EOT", "Both"]
|
|
LIST_SCODE = ["%s" % x for x in range(1, 21)]
|
|
LIST_RPSTE = ["Off"] + ["%s" % x for x in range(1, 11)]
|
|
LIST_SAVE = ["Off", "1:1", "1:2", "1:3", "1:4"]
|
|
LIST_SHIFTD = ["Off", "+", "-"]
|
|
LIST_STEDELAY = ["Off"] + ["%s ms" % x for x in range(100, 1100, 100)]
|
|
LIST_STEP = [str(x) for x in STEPS]
|
|
LIST_TIMEOUT = ["Off"] + ["%s sec" % x for x in range(15, 195, 15)]
|
|
LIST_TIMEOUT_ALARM = ["Off"] + ["%s sec" % x for x in range(1, 11)]
|
|
LIST_PILOT_TONE = ["1000 Hz", "1450 Hz", "1750 Hz", "2100 Hz"]
|
|
LIST_TXPOWER = ["High", "Low"]
|
|
LIST_VOICE = ["Off", "English", "Chinese"]
|
|
LIST_WORKMODE = ["Frequency", "Channel"]
|
|
LIST_POWERON_DISPLAY_TYPE = ["LOGO", "BATT voltage"]
|
|
LIST_BEEP = ["Off", "Beep", "Voice", "Both"]
|
|
LIST_LANGUAGE = ["English", "Chinese"]
|
|
LIST_SCANMODE = ["Time", "Carrier", "Search"]
|
|
LIST_ALARMMODE = ["Local", "Send Tone", "Send Code"]
|
|
LIST_MENU_QUIT_TIME = ["%s sec" % x for x in range(5, 55, 5)] + ["60 sec"]
|
|
LIST_BACKLIGHT_TIMER = ["Always On"] + ["%s sec" % x for x in range(5, 25, 5)]
|
|
LIST_ID_DELAY = ["%s ms" % x for x in range(100, 3100, 100)]
|
|
LIST_QT_SAVEMODE = ["Both", "RX", "TX"]
|
|
LIST_SKEY2_SHORT = ["FM", "Scan", "Search", "Vox"]
|
|
LIST_RPT_TAIL_CLEAR = ["%s ms" % x for x in range(0, 1100, 100)]
|
|
LIST_VOX_DELAY_TIME = ["%s ms" % x for x in range(500, 2100, 100)]
|
|
LIST_VOX_LEVEL = ["Off"] + ["%s" % x for x in range(1, 10, 1)]
|
|
LIST_VOX_LEVEL_ALT = ["%s" % x for x in range(1, 10, 1)]
|
|
LIST_GPS_MODE = ["GPS", "Beidou", "GPS + Beidou"]
|
|
LIST_GPS_TIMEZONE = ["%s" % x for x in range(-12, 13, 1)]
|
|
|
|
TXP_CHOICES = ["High", "Low"]
|
|
TXP_VALUES = [0x00, 0x02]
|
|
|
|
STIMEOUT = 1.5
|
|
|
|
|
|
def model_match(cls, data):
|
|
"""Match the opened image to the correct version"""
|
|
return data[cls.MEM_TOTAL:] == bytes(cls.MODEL, 'utf-8')
|
|
|
|
|
|
def _crypt(symbolIndex, buffer):
|
|
# Some weird encryption is used. From the table below, we only use "CO 7".
|
|
tblEncrySymbol = [b"BHT ", b"CO 7", b"A ES", b" EIY", b"M PQ",
|
|
b"XN Y", b"RVB ", b" HQP", b"W RC", b"MS N",
|
|
b" SAT", b"K DH", b"ZO R", b"C SL", b"6RB ",
|
|
b" JCG", b"PN V", b"J PK", b"EK L", b"I LZ"]
|
|
tblEncrySymbols = tblEncrySymbol[symbolIndex]
|
|
decBuffer = b""
|
|
index1 = 0
|
|
for index2 in range(len(buffer)):
|
|
boolEncryptChar = ((tblEncrySymbols[index1] != 32) &
|
|
(buffer[index2] != 0) &
|
|
(buffer[index2] != 255) &
|
|
(buffer[index2] != tblEncrySymbols[index1]) &
|
|
(buffer[index2] != (tblEncrySymbols[index1] ^ 255))
|
|
)
|
|
if (boolEncryptChar):
|
|
decByte = buffer[index2] ^ tblEncrySymbols[index1]
|
|
decBuffer += decByte.to_bytes(1, 'big')
|
|
else:
|
|
decBuffer += buffer[index2].to_bytes(1, 'big')
|
|
index1 = (index1 + 1) % 4
|
|
return decBuffer
|
|
|
|
|
|
def _make_read_frame(addr, length):
|
|
"""Pack the info in the header format"""
|
|
frame = _make_frame(b"\x52", addr, length)
|
|
# Return the data
|
|
return frame
|
|
|
|
|
|
def _make_frame(cmd, addr, length, data=""):
|
|
"""Pack the info in the header format"""
|
|
frame = cmd+struct.pack(">i", addr)[2:]+struct.pack("b", length)
|
|
# add the data if set
|
|
if len(data) != 0:
|
|
frame += data
|
|
# return the data
|
|
return frame
|
|
|
|
|
|
def _do_ident(radio):
|
|
"""Put the radio in PROGRAM mode & identify it"""
|
|
radio.pipe.baudrate = radio.BAUDRATE
|
|
radio.pipe.parity = "N"
|
|
radio.pipe.timeout = STIMEOUT
|
|
|
|
# Flush input buffer
|
|
baofeng_common._clean_buffer(radio)
|
|
|
|
# Ident radio
|
|
magic = radio._magic
|
|
baofeng_common._rawsend(radio, magic)
|
|
ack = baofeng_common._rawrecv(radio, radio._magic_response_length)
|
|
|
|
if not ack.startswith(radio._fingerprint):
|
|
if ack:
|
|
LOG.debug(repr(ack))
|
|
raise errors.RadioError("Radio did not respond as expected (A)")
|
|
|
|
return True
|
|
|
|
|
|
def _download(radio):
|
|
"""Get the memory map"""
|
|
|
|
# Put radio in program mode and identify it
|
|
_do_ident(radio)
|
|
for index in range(len(radio._magics)):
|
|
baofeng_common._rawsend(radio, radio._magics[index])
|
|
baofeng_common._rawrecv(radio, radio._magicResponseLengths[index])
|
|
|
|
data = b""
|
|
|
|
# UI progress
|
|
status = chirp_common.Status()
|
|
status.cur = 0
|
|
status.max = radio.MEM_TOTAL // radio.BLOCK_SIZE
|
|
status.msg = "Cloning from radio..."
|
|
radio.status_fn(status)
|
|
|
|
for i in range(len(radio.MEM_SIZES)):
|
|
MEM_SIZE = radio.MEM_SIZES[i]
|
|
MEM_START = radio.MEM_STARTS[i]
|
|
for addr in range(MEM_START, MEM_START + MEM_SIZE, radio.BLOCK_SIZE):
|
|
frame = _make_read_frame(addr, radio.BLOCK_SIZE)
|
|
# DEBUG
|
|
LOG.debug("Frame=" + util.hexprint(frame))
|
|
|
|
# Sending the read request
|
|
baofeng_common._rawsend(radio, frame)
|
|
|
|
# Now we read data
|
|
d = baofeng_common._rawrecv(radio, radio.BLOCK_SIZE + 4)
|
|
|
|
LOG.debug("Response Data= " + util.hexprint(d))
|
|
d = _crypt(1, d[4:])
|
|
|
|
# Aggregate the data
|
|
data += d
|
|
|
|
# UI Update
|
|
status.cur = len(data) // radio.BLOCK_SIZE
|
|
status.msg = "Cloning from radio..."
|
|
radio.status_fn(status)
|
|
data += bytes(radio.MODEL, 'utf-8')
|
|
return data
|
|
|
|
|
|
def _upload(radio):
|
|
# Put radio in program mode and identify it
|
|
_do_ident(radio)
|
|
for index in range(len(radio._magics)):
|
|
baofeng_common._rawsend(radio, radio._magics[index])
|
|
baofeng_common._rawrecv(radio, radio._magicResponseLengths[index])
|
|
|
|
data = b""
|
|
|
|
# UI progress
|
|
status = chirp_common.Status()
|
|
status.cur = 0
|
|
status.max = radio.MEM_TOTAL // radio.BLOCK_SIZE
|
|
status.msg = "Cloning from radio..."
|
|
radio.status_fn(status)
|
|
|
|
data_addr = 0x00
|
|
for i in range(len(radio.MEM_SIZES)):
|
|
MEM_SIZE = radio.MEM_SIZES[i]
|
|
MEM_START = radio.MEM_STARTS[i]
|
|
for addr in range(MEM_START, MEM_START + MEM_SIZE, radio.BLOCK_SIZE):
|
|
data = radio.get_mmap()[data_addr:data_addr + radio.BLOCK_SIZE]
|
|
data = _crypt(1, data)
|
|
data_addr += radio.BLOCK_SIZE
|
|
|
|
frame = _make_frame(b"W", addr, radio.BLOCK_SIZE, data)
|
|
# DEBUG
|
|
LOG.debug("Frame=" + util.hexprint(frame))
|
|
|
|
# Sending the read request
|
|
baofeng_common._rawsend(radio, frame)
|
|
|
|
# receiving the response
|
|
ack = baofeng_common._rawrecv(radio, 1)
|
|
if ack != b"\x06":
|
|
msg = "Bad ack writing block 0x%04x" % addr
|
|
raise errors.RadioError(msg)
|
|
|
|
# UI Update
|
|
status.cur = data_addr // radio.BLOCK_SIZE
|
|
status.msg = "Cloning to radio..."
|
|
radio.status_fn(status)
|
|
data += bytes(radio.MODEL, 'utf-8')
|
|
return data
|
|
|
|
|
|
@directory.register
|
|
class UV17Pro(baofeng_common.BaofengCommonHT):
|
|
"""Baofeng UV-17Pro"""
|
|
VENDOR = "Baofeng"
|
|
MODEL = "UV-17Pro"
|
|
NEEDS_COMPAT_SERIAL = False
|
|
|
|
MEM_STARTS = [0x0000, 0x9000, 0xA000, 0xD000]
|
|
MEM_SIZES = [0x8040, 0x0040, 0x02C0, 0x0040]
|
|
|
|
MEM_TOTAL = 0x8380
|
|
BLOCK_SIZE = 0x40
|
|
STIMEOUT = 2
|
|
BAUDRATE = 115200
|
|
|
|
_gmrs = False
|
|
_bw_shift = False
|
|
_support_banknames = False
|
|
|
|
_tri_band = True
|
|
_fileid = []
|
|
_magic = MSTRING_UV17L
|
|
_magic_response_length = 1
|
|
_fingerprint = b"\x06"
|
|
_magics = [b"\x46", b"\x4d",
|
|
b"\x53\x45\x4E\x44\x21\x05\x0D\x01\x01\x01\x04\x11\x08\x05" +
|
|
b"\x0D\x0D\x01\x11\x0F\x09\x12\x09\x10\x04\x00"]
|
|
_magicResponseLengths = [16, 15, 1]
|
|
_fw_ver_start = 0x1EF0
|
|
_recv_block_size = 0x40
|
|
_mem_size = MEM_TOTAL
|
|
_ack_block = True
|
|
_aniid = True
|
|
_vfoscan = False
|
|
_has_gps = False
|
|
_voxsw = False
|
|
_pilot_tone = False
|
|
_send_id_delay = False
|
|
_skey2_short = False
|
|
|
|
MODES = ["NFM", "FM"]
|
|
VALID_CHARS = chirp_common.CHARSET_ALPHANUMERIC + \
|
|
"!@#$%^&*()+-=[]:\";'<>?,./"
|
|
LENGTH_NAME = 12
|
|
SKIP_VALUES = ["", "S"]
|
|
DTCS_CODES = tuple(sorted(chirp_common.DTCS_CODES + (645,)))
|
|
RXTX_CODES = ('Off', )
|
|
for code in chirp_common.TONES:
|
|
RXTX_CODES = (RXTX_CODES + (str(code), ))
|
|
for code in DTCS_CODES:
|
|
RXTX_CODES = (RXTX_CODES + ('D' + str(code) + 'N', ))
|
|
for code in DTCS_CODES:
|
|
RXTX_CODES = (RXTX_CODES + ('D' + str(code) + 'I', ))
|
|
POWER_LEVELS = [chirp_common.PowerLevel("High", watts=5.00),
|
|
chirp_common.PowerLevel("Low", watts=1.00)]
|
|
_airband = (108000000, 136000000)
|
|
_vhf_range = (136000000, 174000000)
|
|
_vhf2_range = (200000000, 260000000)
|
|
_uhf_range = (400000000, 520000000)
|
|
_uhf2_range = (350000000, 390000000)
|
|
|
|
VALID_BANDS = [_vhf_range, _vhf2_range,
|
|
_uhf_range]
|
|
PTTID_LIST = LIST_PTTID
|
|
SCODE_LIST = LIST_SCODE
|
|
|
|
MEM_FORMAT = """
|
|
#seekto 0x0000;
|
|
struct {
|
|
lbcd rxfreq[4];
|
|
lbcd txfreq[4];
|
|
ul16 rxtone;
|
|
ul16 txtone;
|
|
u8 scode:8;
|
|
u8 pttid:8;
|
|
u8 lowpower:8;
|
|
u8 unknown1:1,
|
|
wide:1,
|
|
sqmode:2,
|
|
bcl:1,
|
|
scan:1,
|
|
unknown2:1,
|
|
fhss:1;
|
|
u8 unknown3:8;
|
|
u8 unknown4:8;
|
|
u8 unknown5:8;
|
|
u8 unknown6:8;
|
|
char name[12];
|
|
} memory[1000];
|
|
|
|
#seekto 0x8080;
|
|
struct {
|
|
u8 code[5];
|
|
u8 unknown[1];
|
|
u8 unused1:6,
|
|
aniid:2;
|
|
u8 dtmfon;
|
|
u8 dtmfoff;
|
|
} ani;
|
|
|
|
#seekto 0x80A0;
|
|
struct {
|
|
u8 code[5];
|
|
u8 name[10];
|
|
u8 unused:8;
|
|
} pttid[20];
|
|
|
|
#seekto 0x8280;
|
|
struct {
|
|
char name1[12];
|
|
u32 unknown1;
|
|
char name2[12];
|
|
u32 unknown2;
|
|
char name3[12];
|
|
u32 unknown3;
|
|
char name4[12];
|
|
u32 unknown4;
|
|
char name5[12];
|
|
u32 unknown5;
|
|
char name6[12];
|
|
u32 unknown6;
|
|
char name7[12];
|
|
u32 unknown7;
|
|
char name8[12];
|
|
u32 unknown8;
|
|
char name9[12];
|
|
u32 unknown9;
|
|
char name10[12];
|
|
u32 unknown10;
|
|
} bank_names;
|
|
|
|
struct vfo {
|
|
u8 freq[8];
|
|
ul16 rxtone;
|
|
ul16 txtone;
|
|
u8 unknown0;
|
|
u8 bcl;
|
|
u8 sftd:3,
|
|
scode:5;
|
|
u8 unknown1;
|
|
u8 lowpower;
|
|
u8 unknown2:1,
|
|
wide:1,
|
|
unknown3:5,
|
|
fhss:1;
|
|
u8 unknown4;
|
|
u8 step;
|
|
u8 offset[6];
|
|
u8 unknown5[2];
|
|
u8 sqmode;
|
|
u8 unknown6[3];
|
|
};
|
|
|
|
#seekto 0x8000;
|
|
struct {
|
|
struct vfo a;
|
|
struct vfo b;
|
|
} vfo;
|
|
|
|
#seekto 0x8040;
|
|
struct {
|
|
u8 squelch;
|
|
u8 savemode;
|
|
u8 vox;
|
|
u8 backlight;
|
|
u8 dualstandby;
|
|
u8 tot;
|
|
u8 beep;
|
|
u8 voicesw;
|
|
u8 voice;
|
|
u8 sidetone;
|
|
u8 scanmode;
|
|
u8 pttid;
|
|
u8 pttdly;
|
|
u8 chadistype;
|
|
u8 chbdistype;
|
|
u8 bcl;
|
|
u8 autolock;
|
|
u8 alarmmode;
|
|
u8 alarmtone;
|
|
u8 unknown1;
|
|
u8 tailclear;
|
|
u8 rpttailclear;
|
|
u8 rpttaildet;
|
|
u8 roger;
|
|
u8 unknown2;
|
|
u8 fmenable;
|
|
u8 chaworkmode:4,
|
|
chbworkmode:4;
|
|
u8 keylock;
|
|
u8 powerondistype;
|
|
u8 tone;
|
|
u8 unknown4[2];
|
|
u8 voxdlytime;
|
|
u8 menuquittime;
|
|
u8 unknown5[6];
|
|
u8 totalarm;
|
|
u8 unknown6[2];
|
|
u8 ctsdcsscantype;
|
|
ul16 vfoscanmin;
|
|
ul16 vfoscanmax;
|
|
u8 gpsw;
|
|
u8 gpsmode;
|
|
u8 unknown7[2];
|
|
u8 key2short;
|
|
u8 unknown8[2];
|
|
u8 rstmenu;
|
|
u8 unknown9;
|
|
u8 hangup;
|
|
u8 voxsw;
|
|
u8 gpstimezone;
|
|
} settings;
|
|
"""
|
|
|
|
@classmethod
|
|
def get_prompts(cls):
|
|
rp = chirp_common.RadioPrompts()
|
|
rp.experimental = \
|
|
('This driver is a beta version.\n'
|
|
'\n'
|
|
'Please save an unedited copy of your first successful\n'
|
|
'download to a CHIRP Radio Images(*.img) file.'
|
|
)
|
|
rp.pre_download = _(
|
|
"Follow these instructions to download your info:\n"
|
|
"1 - Turn off your radio\n"
|
|
"2 - Connect your interface cable\n"
|
|
"3 - Turn on your radio\n"
|
|
"4 - Do the download of your radio data\n")
|
|
rp.pre_upload = _(
|
|
"Follow this instructions to upload your info:\n"
|
|
"1 - Turn off your radio\n"
|
|
"2 - Connect your interface cable\n"
|
|
"3 - Turn on your radio\n"
|
|
"4 - Do the upload of your radio data\n")
|
|
return rp
|
|
|
|
def process_mmap(self):
|
|
"""Process the mem map into the mem object"""
|
|
# make lines shorter for style check.
|
|
check1 = (len(self._mmap) == self.MEM_TOTAL)
|
|
check2 = (len(self._mmap) == self.MEM_TOTAL + len(self.MODEL))
|
|
if (check1 or check2):
|
|
self._memobj = bitwise.parse(self.MEM_FORMAT, self._mmap)
|
|
else:
|
|
raise errors.ImageDetectFailed('Image length mismatch.\n'
|
|
'Try reloading the configuration'
|
|
' from the radio.')
|
|
|
|
def get_settings(self):
|
|
"""Translate the bit in the mem_struct into settings in the UI"""
|
|
_mem = self._memobj
|
|
basic = RadioSettingGroup("basic", "Basic Settings")
|
|
bank = RadioSettingGroup("bank", "Bank names")
|
|
work = RadioSettingGroup("work", "VFO Mode Settings")
|
|
dtmfe = RadioSettingGroup("dtmfe", "DTMF Encode Settings")
|
|
top = RadioSettings(basic, bank, work, dtmfe)
|
|
|
|
if _mem.settings.squelch > 0x05:
|
|
val = 0x00
|
|
else:
|
|
val = _mem.settings.squelch
|
|
rs = RadioSetting("settings.squelch", "Squelch",
|
|
RadioSettingValueList(
|
|
LIST_OFF1TO5, LIST_OFF1TO5[val]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.tot", "Timeout Timer",
|
|
RadioSettingValueList(
|
|
LIST_TIMEOUT, LIST_TIMEOUT[_mem.settings.tot]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.savemode", "Save Mode",
|
|
RadioSettingValueBoolean(_mem.settings.savemode))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.totalarm", "Timeout Timer Alarm",
|
|
RadioSettingValueList(
|
|
LIST_TIMEOUT_ALARM,
|
|
LIST_TIMEOUT_ALARM[_mem.settings.totalarm]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.dualstandby", "Dual Watch",
|
|
RadioSettingValueBoolean(_mem.settings.dualstandby))
|
|
basic.append(rs)
|
|
|
|
if self._pilot_tone:
|
|
rs = RadioSetting("settings.tone", "Pilot Tone",
|
|
RadioSettingValueList(
|
|
LIST_PILOT_TONE,
|
|
LIST_PILOT_TONE[_mem.settings.tone]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.sidetone", "Side Tone",
|
|
RadioSettingValueList(
|
|
LIST_SIDE_TONE,
|
|
LIST_SIDE_TONE[_mem.settings.sidetone]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.tailclear", "Tail Clear",
|
|
RadioSettingValueBoolean(_mem.settings.tailclear))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.powerondistype", "Power On Display Type",
|
|
RadioSettingValueList(
|
|
LIST_POWERON_DISPLAY_TYPE,
|
|
LIST_POWERON_DISPLAY_TYPE[
|
|
_mem.settings.powerondistype]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.beep", "Beep",
|
|
RadioSettingValueList(
|
|
LIST_BEEP, LIST_BEEP[_mem.settings.beep]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.roger", "Roger",
|
|
RadioSettingValueBoolean(_mem.settings.roger))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.voice", "Language",
|
|
RadioSettingValueList(
|
|
LIST_LANGUAGE,
|
|
LIST_LANGUAGE[_mem.settings.voice]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.voicesw", "Enable Voice",
|
|
RadioSettingValueBoolean(_mem.settings.voicesw))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.scanmode", "Scan Mode",
|
|
RadioSettingValueList(
|
|
LIST_SCANMODE,
|
|
LIST_SCANMODE[_mem.settings.scanmode]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.alarmmode", "Alarm Mode",
|
|
RadioSettingValueList(
|
|
LIST_ALARMMODE,
|
|
LIST_ALARMMODE[_mem.settings.alarmmode]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.alarmtone", "Sound Alarm",
|
|
RadioSettingValueBoolean(_mem.settings.alarmtone))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.keylock", "Key Lock",
|
|
RadioSettingValueBoolean(_mem.settings.keylock))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.fmenable", "Disable FM radio",
|
|
RadioSettingValueBoolean(_mem.settings.fmenable))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.autolock", "Key Auto Lock",
|
|
RadioSettingValueBoolean(_mem.settings.autolock))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.menuquittime", "Menu Quit Timer",
|
|
RadioSettingValueList(
|
|
LIST_MENU_QUIT_TIME,
|
|
LIST_MENU_QUIT_TIME[
|
|
_mem.settings.menuquittime]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.backlight", "Backlight Timer",
|
|
RadioSettingValueList(
|
|
LIST_BACKLIGHT_TIMER,
|
|
LIST_BACKLIGHT_TIMER[_mem.settings.backlight]))
|
|
basic.append(rs)
|
|
|
|
if self._send_id_delay:
|
|
rs = RadioSetting("settings.pttdly", "Send ID Delay",
|
|
RadioSettingValueList(
|
|
LIST_ID_DELAY,
|
|
LIST_ID_DELAY[_mem.settings.pttdly]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.ctsdcsscantype", "QT Save Mode",
|
|
RadioSettingValueList(
|
|
LIST_QT_SAVEMODE,
|
|
LIST_QT_SAVEMODE[_mem.settings.ctsdcsscantype]))
|
|
basic.append(rs)
|
|
|
|
def getKey2shortIndex(value):
|
|
if value == 0x07:
|
|
return 0
|
|
if value == 0x1C:
|
|
return 1
|
|
if value == 0x1D:
|
|
return 2
|
|
if value == 0x2D:
|
|
return 3
|
|
return 0
|
|
|
|
def apply_Key2short(setting, obj):
|
|
val = str(setting.value)
|
|
if val == "FM":
|
|
obj.key2short = 0x07
|
|
if val == "Scan":
|
|
obj.key2short = 0x1C
|
|
if val == "Search":
|
|
obj.key2short = 0x1D
|
|
if val == "Vox":
|
|
obj.key2short = 0x2D
|
|
|
|
if self._skey2_short:
|
|
rs = RadioSetting("settings.key2short", "Skey2 Short",
|
|
RadioSettingValueList(
|
|
LIST_SKEY2_SHORT,
|
|
LIST_SKEY2_SHORT[
|
|
getKey2shortIndex(
|
|
_mem.settings.key2short)]))
|
|
rs.set_apply_callback(apply_Key2short, _mem.settings)
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.chadistype", "Channel A display type",
|
|
RadioSettingValueList(
|
|
LIST_MODE, LIST_MODE[_mem.settings.chadistype]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.chaworkmode", "Channel A work mode",
|
|
RadioSettingValueList(
|
|
LIST_WORKMODE,
|
|
LIST_WORKMODE[_mem.settings.chaworkmode]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.chbdistype", "Channel B display type",
|
|
RadioSettingValueList(
|
|
LIST_MODE, LIST_MODE[_mem.settings.chbdistype]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.chbworkmode", "Channel B work mode",
|
|
RadioSettingValueList(
|
|
LIST_WORKMODE,
|
|
LIST_WORKMODE[_mem.settings.chbworkmode]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.rpttailclear", "Rpt Tail Clear",
|
|
RadioSettingValueList(
|
|
LIST_RPT_TAIL_CLEAR,
|
|
LIST_RPT_TAIL_CLEAR[
|
|
_mem.settings.rpttailclear]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.rpttaildet", "Rpt Tail Delay",
|
|
RadioSettingValueList(
|
|
LIST_RPT_TAIL_CLEAR,
|
|
LIST_RPT_TAIL_CLEAR[_mem.settings.rpttaildet]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.rstmenu", "Enable Menu Rst",
|
|
RadioSettingValueBoolean(_mem.settings.rstmenu))
|
|
basic.append(rs)
|
|
|
|
if self._voxsw:
|
|
rs = RadioSetting("settings.voxsw", "Vox Switch",
|
|
RadioSettingValueBoolean(_mem.settings.voxsw))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.vox", "Vox Level",
|
|
RadioSettingValueList(
|
|
LIST_VOX_LEVEL_ALT,
|
|
LIST_VOX_LEVEL_ALT[_mem.settings.vox]))
|
|
basic.append(rs)
|
|
else:
|
|
rs = RadioSetting("settings.vox", "Vox Level",
|
|
RadioSettingValueList(
|
|
LIST_VOX_LEVEL,
|
|
LIST_VOX_LEVEL[_mem.settings.vox]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.voxdlytime", "Vox Delay Time",
|
|
RadioSettingValueList(
|
|
LIST_VOX_DELAY_TIME,
|
|
LIST_VOX_DELAY_TIME[_mem.settings.voxdlytime]))
|
|
basic.append(rs)
|
|
|
|
if self._has_gps:
|
|
rs = RadioSetting("settings.gpsw", "GPS On",
|
|
RadioSettingValueBoolean(_mem.settings.gpsw))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.gpsmode", "GPS Mode",
|
|
RadioSettingValueList(
|
|
LIST_GPS_MODE,
|
|
LIST_GPS_MODE[_mem.settings.gpsmode]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.gpstimezone", "GPS Timezone",
|
|
RadioSettingValueList(
|
|
LIST_GPS_TIMEZONE,
|
|
LIST_GPS_TIMEZONE[_mem.settings.gpstimezone]))
|
|
basic.append(rs)
|
|
|
|
def _filterName(name, zone):
|
|
fname = ""
|
|
charset = chirp_common.CHARSET_ASCII
|
|
for char in name:
|
|
if ord(str(char)) == 255:
|
|
break
|
|
if str(char) not in charset:
|
|
char = "X"
|
|
fname += str(char)
|
|
if fname == "XXXXXX":
|
|
fname = "ZONE" + zone
|
|
return fname
|
|
|
|
if self._support_banknames:
|
|
_zone = "01"
|
|
_msg = _mem.bank_names
|
|
rs = RadioSetting("bank_names.name1", "Bank name 1",
|
|
RadioSettingValueString(
|
|
0, 12, _filterName(_msg.name1, _zone)))
|
|
bank.append(rs)
|
|
|
|
_zone = "02"
|
|
_msg = _mem.bank_names
|
|
rs = RadioSetting("bank_names.name2", "Bank name 2",
|
|
RadioSettingValueString(
|
|
0, 12, _filterName(_msg.name2, _zone)))
|
|
|
|
bank.append(rs)
|
|
_zone = "03"
|
|
_msg = _mem.bank_names
|
|
rs = RadioSetting("bank_names.name3", "Bank name 3",
|
|
RadioSettingValueString(
|
|
0, 12, _filterName(_msg.name3, _zone)))
|
|
bank.append(rs)
|
|
|
|
_zone = "04"
|
|
_msg = _mem.bank_names
|
|
rs = RadioSetting("bank_names.name4", "Bank name 4",
|
|
RadioSettingValueString(
|
|
0, 12, _filterName(_msg.name4, _zone)))
|
|
bank.append(rs)
|
|
|
|
_zone = "05"
|
|
_msg = _mem.bank_names
|
|
rs = RadioSetting("bank_names.name5", "Bank name 5",
|
|
RadioSettingValueString(
|
|
0, 12, _filterName(_msg.name5, _zone)))
|
|
bank.append(rs)
|
|
|
|
_zone = "06"
|
|
_msg = _mem.bank_names
|
|
rs = RadioSetting("bank_names.name6", "Bank name 6",
|
|
RadioSettingValueString(
|
|
0, 12, _filterName(_msg.name6, _zone)))
|
|
bank.append(rs)
|
|
|
|
_zone = "07"
|
|
_msg = _mem.bank_names
|
|
rs = RadioSetting("bank_names.name7", "Bank name 7",
|
|
RadioSettingValueString(
|
|
0, 12, _filterName(_msg.name7, _zone)))
|
|
bank.append(rs)
|
|
|
|
_zone = "08"
|
|
_msg = _mem.bank_names
|
|
rs = RadioSetting("bank_names.name8", "Bank name 8",
|
|
RadioSettingValueString(
|
|
0, 12, _filterName(_msg.name8, _zone)))
|
|
bank.append(rs)
|
|
|
|
_zone = "09"
|
|
_msg = _mem.bank_names
|
|
rs = RadioSetting("bank_names.name9", "Bank name 9",
|
|
RadioSettingValueString(
|
|
0, 12, _filterName(_msg.name9, _zone)))
|
|
bank.append(rs)
|
|
|
|
_zone = "10"
|
|
_msg = _mem.bank_names
|
|
rs = RadioSetting("bank_names.name10", "Bank name 10",
|
|
RadioSettingValueString(
|
|
0, 12, _filterName(_msg.name10, _zone)))
|
|
bank.append(rs)
|
|
|
|
_codeobj = self._memobj.ani.code
|
|
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
|
|
val = RadioSettingValueString(0, 5, _code, False)
|
|
val.set_charset(DTMF_CHARS)
|
|
rs = RadioSetting("ani.code", "ANI Code", val)
|
|
|
|
# DTMF settings
|
|
def apply_code(setting, obj, length):
|
|
code = []
|
|
for j in range(0, length):
|
|
try:
|
|
code.append(DTMF_CHARS.index(str(setting.value)[j]))
|
|
except IndexError:
|
|
code.append(0xFF)
|
|
obj.code = code
|
|
|
|
for i in range(0, 20):
|
|
_codeobj = self._memobj.pttid[i].code
|
|
_code = "".join([
|
|
DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
|
|
val = RadioSettingValueString(0, 5, _code, False)
|
|
val.set_charset(DTMF_CHARS)
|
|
pttid = RadioSetting("pttid/%i.code" % i,
|
|
"Signal Code %i" % (i + 1), val)
|
|
pttid.set_apply_callback(apply_code, self._memobj.pttid[i], 5)
|
|
dtmfe.append(pttid)
|
|
|
|
if _mem.ani.dtmfon > 0xC3:
|
|
val = 0x03
|
|
else:
|
|
val = _mem.ani.dtmfon
|
|
rs = RadioSetting("ani.dtmfon", "DTMF Speed (on)",
|
|
RadioSettingValueList(LIST_DTMFSPEED,
|
|
LIST_DTMFSPEED[val]))
|
|
dtmfe.append(rs)
|
|
|
|
if _mem.ani.dtmfoff > 0xC3:
|
|
val = 0x03
|
|
else:
|
|
val = _mem.ani.dtmfoff
|
|
rs = RadioSetting("ani.dtmfoff", "DTMF Speed (off)",
|
|
RadioSettingValueList(LIST_DTMFSPEED,
|
|
LIST_DTMFSPEED[val]))
|
|
dtmfe.append(rs)
|
|
|
|
_codeobj = self._memobj.ani.code
|
|
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
|
|
val = RadioSettingValueString(0, 5, _code, False)
|
|
val.set_charset(DTMF_CHARS)
|
|
rs = RadioSetting("ani.code", "ANI Code", val)
|
|
rs.set_apply_callback(apply_code, self._memobj.ani, 5)
|
|
dtmfe.append(rs)
|
|
|
|
if self._aniid:
|
|
rs = RadioSetting("ani.aniid", "When to send ANI ID",
|
|
RadioSettingValueList(LIST_PTTID,
|
|
LIST_PTTID[
|
|
_mem.ani.aniid]))
|
|
dtmfe.append(rs)
|
|
|
|
rs = RadioSetting("settings.hangup", "Hang-up time",
|
|
RadioSettingValueList(LIST_HANGUPTIME,
|
|
LIST_HANGUPTIME[
|
|
_mem.settings.hangup]))
|
|
dtmfe.append(rs)
|
|
|
|
def convert_bytes_to_freq(bytes):
|
|
real_freq = 0
|
|
for byte in bytes:
|
|
real_freq = (real_freq * 10) + byte
|
|
return chirp_common.format_freq(real_freq * 10)
|
|
|
|
def my_validate(value):
|
|
value = chirp_common.parse_freq(value)
|
|
freqOk = False
|
|
for band in self.VALID_BANDS:
|
|
if value > band[0] and value < band[1]:
|
|
freqOk = True
|
|
if not freqOk:
|
|
raise InvalidValueError("Invalid frequency!")
|
|
return chirp_common.format_freq(value)
|
|
|
|
def apply_freq(setting, obj):
|
|
value = chirp_common.parse_freq(str(setting.value)) / 10
|
|
for i in range(7, -1, -1):
|
|
obj.freq[i] = value % 10
|
|
value /= 10
|
|
|
|
val1a = RadioSettingValueString(0, 10,
|
|
convert_bytes_to_freq(
|
|
_mem.vfo.a.freq))
|
|
val1a.set_validate_callback(my_validate)
|
|
rs = RadioSetting("vfo.a.freq", "VFO A Frequency", val1a)
|
|
rs.set_apply_callback(apply_freq, _mem.vfo.a)
|
|
work.append(rs)
|
|
|
|
rs = RadioSetting("vfo.a.sftd", "VFO A Offset dir",
|
|
RadioSettingValueList(
|
|
LIST_SHIFTD, LIST_SHIFTD[_mem.vfo.a.sftd]))
|
|
work.append(rs)
|
|
|
|
def convert_bytes_to_offset(bytes):
|
|
real_offset = 0
|
|
for byte in bytes:
|
|
real_offset = (real_offset * 10) + byte
|
|
return chirp_common.format_freq(real_offset * 1000)
|
|
|
|
def apply_offset(setting, obj):
|
|
value = chirp_common.parse_freq(str(setting.value)) / 1000
|
|
for i in range(5, -1, -1):
|
|
obj.offset[i] = value % 10
|
|
value /= 10
|
|
|
|
val1a = RadioSettingValueString(
|
|
0, 10, convert_bytes_to_offset(_mem.vfo.a.offset))
|
|
rs = RadioSetting("vfo.a.offset",
|
|
"VFO A Offset", val1a)
|
|
rs.set_apply_callback(apply_offset, _mem.vfo.a)
|
|
work.append(rs)
|
|
|
|
def apply_txpower_listvalue(setting, obj):
|
|
LOG.debug("Setting value: " + str(
|
|
setting.value) + " from list")
|
|
val = str(setting.value)
|
|
index = TXP_CHOICES.index(val)
|
|
val = TXP_VALUES[index]
|
|
obj.set_value(val)
|
|
|
|
rs = RadioSetting("vfo.a.lowpower", "VFO A Power",
|
|
RadioSettingValueList(
|
|
LIST_TXPOWER,
|
|
LIST_TXPOWER[
|
|
min(_mem.vfo.a.lowpower, 0x02)]
|
|
))
|
|
work.append(rs)
|
|
|
|
rs = RadioSetting("vfo.a.wide", "VFO A Bandwidth",
|
|
RadioSettingValueList(
|
|
LIST_BANDWIDTH,
|
|
LIST_BANDWIDTH[_mem.vfo.a.wide]))
|
|
work.append(rs)
|
|
|
|
rs = RadioSetting("vfo.a.scode", "VFO A S-CODE",
|
|
RadioSettingValueList(
|
|
LIST_SCODE,
|
|
LIST_SCODE[_mem.vfo.a.scode]))
|
|
work.append(rs)
|
|
|
|
rs = RadioSetting("vfo.a.step", "VFO A Tuning Step",
|
|
RadioSettingValueList(
|
|
LIST_STEP, LIST_STEP[_mem.vfo.a.step]))
|
|
work.append(rs)
|
|
|
|
rs = RadioSetting("vfo.a.fhss", "VFO A FHSS",
|
|
RadioSettingValueBoolean(_mem.vfo.a.fhss))
|
|
work.append(rs)
|
|
|
|
def getToneIndex(tone):
|
|
if tone in [0, 0xFFFF]:
|
|
index = 0
|
|
elif tone >= 0x0258:
|
|
index = self.RXTX_CODES.index(str(tone / 10.0))
|
|
elif tone <= 0x0258:
|
|
index = 50 + tone
|
|
if tone > 0x69:
|
|
index = tone - 0x6A + 156
|
|
return self.RXTX_CODES[index]
|
|
|
|
def apply_rxtone(setting, obj):
|
|
index = self.RXTX_CODES.index(str(setting.value))
|
|
if index > 156:
|
|
obj.rxtone = index - 156 + 0x6A
|
|
elif index > 50:
|
|
obj.rxtone = index - 50
|
|
elif index == 0:
|
|
obj.rxtone = 0
|
|
else:
|
|
obj.rxtone = int(float(setting.value)*10)
|
|
|
|
def apply_txtone(setting, obj):
|
|
index = self.RXTX_CODES.index(str(setting.value))
|
|
if index > 156:
|
|
obj.txtone = index - 156 + 0x6A
|
|
elif index > 50:
|
|
obj.txtone = index - 50
|
|
elif index == 0:
|
|
obj.txtone = 0
|
|
else:
|
|
obj.txtone = int(float(setting.value)*10)
|
|
|
|
rs = RadioSetting("vfo.a.rxtone", "VFA A RX QT/DQT",
|
|
RadioSettingValueList(self.RXTX_CODES,
|
|
getToneIndex(
|
|
_mem.vfo.a.rxtone)))
|
|
rs.set_apply_callback(apply_rxtone, _mem.vfo.a)
|
|
work.append(rs)
|
|
|
|
rs = RadioSetting("vfo.a.txtone", "VFA A TX QT/DQT",
|
|
RadioSettingValueList(self.RXTX_CODES,
|
|
getToneIndex(
|
|
_mem.vfo.a.txtone)))
|
|
rs.set_apply_callback(apply_txtone, _mem.vfo.a)
|
|
work.append(rs)
|
|
|
|
val1b = RadioSettingValueString(0, 10,
|
|
convert_bytes_to_freq(
|
|
_mem.vfo.b.freq))
|
|
val1b.set_validate_callback(my_validate)
|
|
rs = RadioSetting("vfo.b.freq", "VFO B Frequency", val1b)
|
|
rs.set_apply_callback(apply_freq, _mem.vfo.b)
|
|
work.append(rs)
|
|
|
|
rs = RadioSetting("vfo.b.sftd", "VFO B Offset dir",
|
|
RadioSettingValueList(
|
|
LIST_SHIFTD, LIST_SHIFTD[_mem.vfo.b.sftd]))
|
|
work.append(rs)
|
|
|
|
val1b = RadioSettingValueString(
|
|
0, 10, convert_bytes_to_offset(_mem.vfo.b.offset))
|
|
rs = RadioSetting("vfo.b.offset",
|
|
"VFO B Offset", val1b)
|
|
rs.set_apply_callback(apply_offset, _mem.vfo.b)
|
|
work.append(rs)
|
|
|
|
rs = RadioSetting("vfo.b.lowpower", "VFO B Power",
|
|
RadioSettingValueList(
|
|
LIST_TXPOWER,
|
|
LIST_TXPOWER[min(_mem.vfo.b.lowpower, 0x02)]
|
|
))
|
|
work.append(rs)
|
|
|
|
rs = RadioSetting("vfo.b.wide", "VFO B Bandwidth",
|
|
RadioSettingValueList(
|
|
LIST_BANDWIDTH,
|
|
LIST_BANDWIDTH[_mem.vfo.b.wide]))
|
|
work.append(rs)
|
|
|
|
rs = RadioSetting("vfo.b.scode", "VFO B S-CODE",
|
|
RadioSettingValueList(
|
|
LIST_SCODE,
|
|
LIST_SCODE[_mem.vfo.b.scode]))
|
|
work.append(rs)
|
|
|
|
rs = RadioSetting("vfo.b.step", "VFO B Tuning Step",
|
|
RadioSettingValueList(
|
|
LIST_STEP, LIST_STEP[_mem.vfo.b.step]))
|
|
work.append(rs)
|
|
|
|
rs = RadioSetting("vfo.b.fhss", "VFO B FHSS",
|
|
RadioSettingValueBoolean(_mem.vfo.b.fhss))
|
|
work.append(rs)
|
|
|
|
rs = RadioSetting("vfo.b.rxtone", "VFA B RX QT/DQT",
|
|
RadioSettingValueList(self.RXTX_CODES,
|
|
getToneIndex(
|
|
_mem.vfo.b.rxtone)))
|
|
rs.set_apply_callback(apply_rxtone, _mem.vfo.b)
|
|
work.append(rs)
|
|
|
|
rs = RadioSetting("vfo.b.txtone", "VFA B TX QT/DQT",
|
|
RadioSettingValueList(self.RXTX_CODES,
|
|
getToneIndex(
|
|
_mem.vfo.b.txtone)))
|
|
rs.set_apply_callback(apply_txtone, _mem.vfo.b)
|
|
work.append(rs)
|
|
|
|
if self._vfoscan:
|
|
def scan_validate(value):
|
|
freqOk = False
|
|
for band in self.VALID_BANDS:
|
|
minBand = (band[0]/1000000)
|
|
maxBand = (band[1]/1000000)
|
|
if value >= minBand and value <= maxBand:
|
|
freqOk = True
|
|
if not freqOk:
|
|
raise InvalidValueError("Invalid frequency!")
|
|
return value
|
|
|
|
scanMin = RadioSettingValueInteger(0, 800,
|
|
_mem.settings.vfoscanmin)
|
|
scanMin.set_validate_callback(scan_validate)
|
|
rs = RadioSetting("settings.vfoscanmin", "VFO scan range minimum",
|
|
scanMin)
|
|
work.append(rs)
|
|
|
|
scanMax = RadioSettingValueInteger(0, 800,
|
|
_mem.settings.vfoscanmax)
|
|
scanMax.set_validate_callback(scan_validate)
|
|
rs = RadioSetting("settings.vfoscanmax", "VFO scan range maximum",
|
|
scanMax)
|
|
work.append(rs)
|
|
|
|
rs = RadioSetting("settings.bcl", "BCL",
|
|
RadioSettingValueBoolean(_mem.settings.bcl))
|
|
work.append(rs)
|
|
|
|
rs = RadioSetting("settings.pttid", "PTT ID",
|
|
RadioSettingValueList(self.PTTID_LIST,
|
|
self.PTTID_LIST[
|
|
_mem.settings.pttid]))
|
|
work.append(rs)
|
|
|
|
return top
|
|
|
|
def sync_in(self):
|
|
"""Download from radio"""
|
|
try:
|
|
data = _download(self)
|
|
except errors.RadioError:
|
|
# Pass through any real errors we raise
|
|
raise
|
|
except Exception:
|
|
# If anything unexpected happens, make sure we raise
|
|
# a RadioError and log the problem
|
|
LOG.exception('Unexpected error during download')
|
|
raise errors.RadioError('Unexpected error communicating '
|
|
'with the radio')
|
|
self._mmap = memmap.MemoryMapBytes(data)
|
|
|
|
self.process_mmap()
|
|
|
|
def sync_out(self):
|
|
"""Upload to radio"""
|
|
try:
|
|
_upload(self)
|
|
except errors.RadioError:
|
|
raise
|
|
except Exception:
|
|
# If anything unexpected happens, make sure we raise
|
|
# a RadioError and log the problem
|
|
LOG.exception('Unexpected error during upload')
|
|
raise errors.RadioError('Unexpected error communicating '
|
|
'with the radio')
|
|
|
|
def get_features(self):
|
|
"""Get the radio's features"""
|
|
|
|
rf = chirp_common.RadioFeatures()
|
|
rf.has_settings = True
|
|
rf.has_bank = False
|
|
rf.has_tuning_step = False
|
|
rf.can_odd_split = True
|
|
rf.has_name = True
|
|
rf.has_offset = True
|
|
rf.has_mode = True
|
|
rf.has_dtcs = True
|
|
rf.has_rx_dtcs = True
|
|
rf.has_dtcs_polarity = True
|
|
rf.has_ctone = True
|
|
rf.has_cross = True
|
|
rf.valid_modes = self.MODES
|
|
rf.valid_characters = self.VALID_CHARS
|
|
rf.valid_name_length = self.LENGTH_NAME
|
|
if self._gmrs:
|
|
rf.valid_duplexes = ["", "+", "off"]
|
|
else:
|
|
rf.valid_duplexes = ["", "-", "+", "split", "off"]
|
|
rf.valid_tmodes = ['', 'Tone', 'TSQL', 'DTCS', 'Cross']
|
|
rf.valid_cross_modes = [
|
|
"Tone->Tone",
|
|
"DTCS->",
|
|
"->DTCS",
|
|
"Tone->DTCS",
|
|
"DTCS->Tone",
|
|
"->Tone",
|
|
"DTCS->DTCS"]
|
|
rf.valid_skips = self.SKIP_VALUES
|
|
rf.valid_dtcs_codes = self.DTCS_CODES
|
|
rf.memory_bounds = (0, 999)
|
|
rf.valid_power_levels = self.POWER_LEVELS
|
|
rf.valid_bands = self.VALID_BANDS
|
|
rf.valid_tuning_steps = STEPS
|
|
|
|
return rf
|
|
|
|
def get_memory(self, number):
|
|
_mem = self._memobj.memory[number]
|
|
|
|
mem = chirp_common.Memory()
|
|
mem.number = number
|
|
|
|
if _mem.get_raw()[0] == 255:
|
|
mem.empty = True
|
|
return mem
|
|
|
|
mem.freq = int(_mem.rxfreq) * 10
|
|
|
|
if self._is_txinh(_mem):
|
|
# TX freq not set
|
|
mem.duplex = "off"
|
|
mem.offset = 0
|
|
else:
|
|
# TX freq set
|
|
offset = (int(_mem.txfreq) * 10) - mem.freq
|
|
if offset != 0:
|
|
if baofeng_common._split(self.get_features(), mem.freq, int(
|
|
_mem.txfreq) * 10):
|
|
mem.duplex = "split"
|
|
mem.offset = int(_mem.txfreq) * 10
|
|
elif offset < 0:
|
|
mem.offset = abs(offset)
|
|
mem.duplex = "-"
|
|
elif offset > 0:
|
|
mem.offset = offset
|
|
mem.duplex = "+"
|
|
else:
|
|
mem.offset = 0
|
|
|
|
for char in _mem.name:
|
|
if str(char) == "\xFF":
|
|
char = " " # The OEM software may have 0xFF mid-name
|
|
mem.name += str(char)
|
|
mem.name = mem.name.rstrip()
|
|
|
|
if not _mem.scan:
|
|
mem.skip = "S"
|
|
|
|
levels = self.POWER_LEVELS
|
|
try:
|
|
mem.power = levels[_mem.lowpower]
|
|
except IndexError:
|
|
mem.power = levels[0]
|
|
|
|
mem.mode = _mem.wide and "NFM" or "FM"
|
|
|
|
dtcs_pol = ["N", "N"]
|
|
|
|
if _mem.txtone in [0, 0xFFFF]:
|
|
txmode = ""
|
|
elif _mem.txtone >= 0x0258:
|
|
txmode = "Tone"
|
|
mem.rtone = int(_mem.txtone) / 10.0
|
|
elif _mem.txtone <= 0x0258:
|
|
txmode = "DTCS"
|
|
if _mem.txtone > 0x69:
|
|
index = _mem.txtone - 0x6A
|
|
dtcs_pol[0] = "R"
|
|
else:
|
|
index = _mem.txtone - 1
|
|
mem.dtcs = self.DTCS_CODES[index]
|
|
else:
|
|
LOG.warn("Bug: txtone is %04x" % _mem.txtone)
|
|
|
|
if _mem.rxtone in [0, 0xFFFF]:
|
|
rxmode = ""
|
|
elif _mem.rxtone >= 0x0258:
|
|
rxmode = "Tone"
|
|
mem.ctone = int(_mem.rxtone) / 10.0
|
|
elif _mem.rxtone <= 0x0258:
|
|
rxmode = "DTCS"
|
|
if _mem.rxtone >= 0x6A:
|
|
index = _mem.rxtone - 0x6A
|
|
dtcs_pol[1] = "R"
|
|
else:
|
|
index = _mem.rxtone - 1
|
|
mem.rx_dtcs = self.DTCS_CODES[index]
|
|
else:
|
|
LOG.warn("Bug: rxtone is %04x" % _mem.rxtone)
|
|
|
|
if txmode == "Tone" and not rxmode:
|
|
mem.tmode = "Tone"
|
|
elif txmode == rxmode and txmode == "Tone" and mem.rtone == mem.ctone:
|
|
mem.tmode = "TSQL"
|
|
elif txmode == rxmode and txmode == "DTCS" and mem.dtcs == mem.rx_dtcs:
|
|
mem.tmode = "DTCS"
|
|
elif rxmode or txmode:
|
|
mem.tmode = "Cross"
|
|
mem.cross_mode = "%s->%s" % (txmode, rxmode)
|
|
|
|
mem.dtcs_polarity = "".join(dtcs_pol)
|
|
|
|
mem.extra = RadioSettingGroup("Extra", "extra")
|
|
|
|
rs = RadioSetting("bcl", "BCL",
|
|
RadioSettingValueBoolean(_mem.bcl))
|
|
mem.extra.append(rs)
|
|
|
|
if (_mem.pttid != 0xFF):
|
|
rs = RadioSetting("pttid", "PTT ID",
|
|
RadioSettingValueList(self.PTTID_LIST,
|
|
self.PTTID_LIST[
|
|
_mem.pttid]))
|
|
mem.extra.append(rs)
|
|
|
|
if (_mem.scode != 0xFF):
|
|
rs = RadioSetting("scode", "S-CODE",
|
|
RadioSettingValueList(self.SCODE_LIST,
|
|
self.SCODE_LIST[
|
|
_mem.scode]))
|
|
mem.extra.append(rs)
|
|
|
|
return mem
|
|
|
|
def set_memory(self, mem):
|
|
_mem = self._memobj.memory[mem.number]
|
|
|
|
_mem.set_raw("\x00"*16 + "\xff" * 16)
|
|
|
|
if mem.empty:
|
|
_mem.set_raw("\xff" * 32)
|
|
return
|
|
|
|
_mem.rxfreq = mem.freq / 10
|
|
|
|
if mem.duplex == "off":
|
|
for i in range(0, 4):
|
|
_mem.txfreq[i].set_raw("\xFF")
|
|
elif mem.duplex == "split":
|
|
_mem.txfreq = mem.offset / 10
|
|
elif mem.duplex == "+":
|
|
_mem.txfreq = (mem.freq + mem.offset) / 10
|
|
elif mem.duplex == "-":
|
|
_mem.txfreq = (mem.freq - mem.offset) / 10
|
|
else:
|
|
_mem.txfreq = mem.freq / 10
|
|
|
|
_namelength = self.get_features().valid_name_length
|
|
for i in range(_namelength):
|
|
try:
|
|
_mem.name[i] = mem.name[i]
|
|
except IndexError:
|
|
_mem.name[i] = "\xFF"
|
|
|
|
rxmode = txmode = ""
|
|
if mem.tmode == "Tone":
|
|
_mem.txtone = int(mem.rtone * 10)
|
|
_mem.rxtone = 0
|
|
elif mem.tmode == "TSQL":
|
|
_mem.txtone = int(mem.ctone * 10)
|
|
_mem.rxtone = int(mem.ctone * 10)
|
|
elif mem.tmode == "DTCS":
|
|
rxmode = txmode = "DTCS"
|
|
_mem.txtone = self.DTCS_CODES.index(mem.dtcs) + 1
|
|
_mem.rxtone = self.DTCS_CODES.index(mem.dtcs) + 1
|
|
elif mem.tmode == "Cross":
|
|
txmode, rxmode = mem.cross_mode.split("->", 1)
|
|
if txmode == "Tone":
|
|
_mem.txtone = int(mem.rtone * 10)
|
|
elif txmode == "DTCS":
|
|
_mem.txtone = self.DTCS_CODES.index(mem.dtcs) + 1
|
|
else:
|
|
_mem.txtone = 0
|
|
if rxmode == "Tone":
|
|
_mem.rxtone = int(mem.ctone * 10)
|
|
elif rxmode == "DTCS":
|
|
_mem.rxtone = self.DTCS_CODES.index(mem.rx_dtcs) + 1
|
|
else:
|
|
_mem.rxtone = 0
|
|
else:
|
|
_mem.rxtone = 0
|
|
_mem.txtone = 0
|
|
|
|
if txmode == "DTCS" and mem.dtcs_polarity[0] == "R":
|
|
_mem.txtone += 0x69
|
|
if rxmode == "DTCS" and mem.dtcs_polarity[1] == "R":
|
|
_mem.rxtone += 0x69
|
|
|
|
_mem.scan = mem.skip != "S"
|
|
_mem.wide = mem.mode == "NFM"
|
|
|
|
if mem.power:
|
|
_mem.lowpower = self.POWER_LEVELS.index(mem.power)
|
|
else:
|
|
_mem.lowpower = 0
|
|
|
|
# extra settings
|
|
if len(mem.extra) > 0:
|
|
# there are setting, parse
|
|
for setting in mem.extra:
|
|
if setting.get_name() == "scode":
|
|
setattr(_mem, setting.get_name(), str(int(setting.value)))
|
|
else:
|
|
setattr(_mem, setting.get_name(), setting.value)
|
|
else:
|
|
# there are no extra settings, load defaults
|
|
_mem.bcl = 0
|
|
_mem.pttid = 0
|
|
_mem.scode = 0
|
|
|
|
|
|
@directory.register
|
|
class UV17ProGPS(UV17Pro):
|
|
VENDOR = "Baofeng"
|
|
MODEL = "UV-17ProGPS"
|
|
_support_banknames = True
|
|
_magic = MSTRING_UV17PROGPS
|
|
_magics = [b"\x46", b"\x4d", b"\x53\x45\x4E\x44\x21\x05\x0D\x01\x01" +
|
|
b"\x01\x04\x11\x08\x05\x0D\x0D\x01\x11\x0F\x09\x12\x09" +
|
|
b"\x10\x04\x00"]
|
|
_magicResponseLengths = [16, 7, 1]
|
|
_aniid = False
|
|
_vfoscan = True
|
|
_has_gps = True
|
|
_voxsw = True
|
|
_pilot_tone = True
|
|
_send_id_delay = True
|
|
_skey2_short = True
|
|
VALID_BANDS = [UV17Pro._airband, UV17Pro._vhf_range, UV17Pro._vhf2_range,
|
|
UV17Pro._uhf_range, UV17Pro._uhf2_range]
|
