|
# Quansheng UV-K5 driver (c) 2023 Jacek Lipkowski <sq5bpf@lipkowski.org>
|
|
#
|
|
# based on template.py Copyright 2012 Dan Smith <dsmith@danplanet.com>
|
|
#
|
|
#
|
|
# This is a preliminary version of a driver for the UV-K5
|
|
# It is based on my reverse engineering effort described here:
|
|
# https://github.com/sq5bpf/uvk5-reverse-engineering
|
|
#
|
|
# Warning: this driver is experimental, it may brick your radio,
|
|
# eat your lunch and mess up your configuration.
|
|
#
|
|
#
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 2 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
#
|
|
# Adapted partially to IJV firmware v2.9 by Julian Lilov (LZ1JDL)
|
|
# https://www.universirius.com/en_gb/preppers/quansheng-uv-k5-manuale-del-firmware-ijv/#Firmware-IJV
|
|
#
|
|
# Adapted to IJV Firmware by Francesco IK8JHL
|
|
# FIX: QRA , Beacon/CQ CAll Message, Selettive , TX Enable, PTTID, Squelch A/B, Band TX, Band A/B TX , Singol Band enable, Satcom , Upconverter etc etc
|
|
# eliminatte funzioni non attive nel FW IJV
|
|
# aggiunta impostazione Tono custom , Hz = Valore /10
|
|
#
|
|
# Modificata struttura per renderlo compatibile con la versione 3.00 by IJV
|
|
# jhl> fix vari, inserimento frequenze con punto decimale , eliminate E , aggiunto screen A/B .., DTMF Contact ,etc etc
|
|
# jhl> adapted to IJV-vX3 999 Channel
|
|
|
|
# IJV Version : 48
|
|
#JHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHL
|
|
IJV_VAR = 0 #@variant 0 per versione V3 ; 1 per versione VX3
|
|
#JHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHLJHL
|
|
import struct
|
|
import logging
|
|
|
|
from chirp import chirp_common, directory, bitwise, memmap, errors, util
|
|
from chirp.settings import RadioSetting, RadioSettingGroup, \
|
|
RadioSettingValueBoolean, RadioSettingValueList, \
|
|
RadioSettingValueInteger, RadioSettingValueString, \
|
|
RadioSettings
|
|
|
|
LOG = logging.getLogger(__name__)
|
|
|
|
# Show the obfuscated version of commands. Not needed normally, but
|
|
# might be useful for someone who is debugging a similar radio
|
|
DEBUG_SHOW_OBFUSCATED_COMMANDS = False
|
|
|
|
# Show the memory being written/received. Not needed normally, because
|
|
# this is the same information as in the packet hexdumps, but
|
|
# might be useful for someone debugging some obscure memory issue
|
|
DEBUG_SHOW_MEMORY_ACTIONS = True
|
|
MEM_1 = """
|
|
// -------------------0x0000
|
|
ul16 call_channel;
|
|
u8 max_talk_time;
|
|
u8 no_used2;
|
|
u8 key_lock;
|
|
u8 vox_switch;
|
|
u8 vox_level;
|
|
u8 mic_gain;
|
|
// -------------------0x0008
|
|
u8 beep_control;
|
|
u8 channel_display_mode;
|
|
u8 crossband;
|
|
u8 battery_save;
|
|
u8 dual_watch;
|
|
u8 backlight_auto_mode;
|
|
u8 tail_note_elimination;
|
|
u8 vfo_lock;
|
|
// -------------------0x0010
|
|
u8 flock;
|
|
u8 scan_resume_mode;
|
|
u8 auto_keypad_lock;
|
|
u8 power_on_dispmode;
|
|
u8 no_used3;
|
|
u8 no_used4;
|
|
u8 beacon;
|
|
|
|
u8 no_used5:1,
|
|
bl_mode:2,
|
|
micbar:1,
|
|
bat_text:2,
|
|
dtmf_live:1,
|
|
tx_enable:1;
|
|
|
|
// -------------------0x0018
|
|
struct
|
|
{
|
|
u8 val;
|
|
} agc[7];
|
|
|
|
u8 no_used6:2,
|
|
upconv:2,
|
|
satcom:1,
|
|
signal_meter:1,
|
|
single_vfo:1,
|
|
no_used7:1;
|
|
|
|
// -------------------0x0020
|
|
u8 alarm_mode;
|
|
u8 reminding_of_end_talk;
|
|
u8 repeater_tail_elimination;
|
|
u8 bands_tx;
|
|
u8 back_type;
|
|
u8 no_used9;
|
|
u8 no_used10;
|
|
u8 no_used11;
|
|
// -------------------0x0028
|
|
struct {
|
|
u8 side_tone;
|
|
char separate_code;
|
|
char group_call_code;
|
|
u8 decode_response;
|
|
u8 auto_reset_time;
|
|
u8 preload_time;
|
|
u8 first_code_persist_time;
|
|
u8 hash_persist_time;
|
|
u8 code_persist_time;
|
|
u8 code_interval_time;
|
|
} dtmf_settings;
|
|
|
|
// -------------------0x0032
|
|
u16 custom_tone[1];
|
|
u8 no_used12;
|
|
u8 no_used13;
|
|
u8 no_used14;
|
|
u8 no_used15;
|
|
// -------------------0x0038
|
|
u8 ch_list;
|
|
u16 no_used16;
|
|
u16 no_used17;
|
|
u16 no_used18;
|
|
u8 no_used19;
|
|
// -------------------0x0040
|
|
ul32 fm_freq;
|
|
ul32 sat_freq;
|
|
ul32 no_used21;
|
|
ul32 no_used22;
|
|
|
|
// -------------------0x0050
|
|
ul16 screen_cha;
|
|
ul16 mr_cha;
|
|
ul16 freq_cha;
|
|
ul16 nooa_cha;
|
|
ul16 screen_chb;
|
|
ul16 mr_chb;
|
|
ul16 freq_chb;
|
|
ul16 nooa_chb;
|
|
|
|
|
|
// -------------------0x0150
|
|
#seekto 0x150;
|
|
char logo_line1[16];
|
|
char logo_line2[16];
|
|
char qrz_label[8];
|
|
|
|
// -------------------0x0178
|
|
struct
|
|
{
|
|
char dtmf_local_code[8];
|
|
char dtmf_up_code[8];
|
|
char dtmf_down_code[8];
|
|
} dtmf_settings_numbers;
|
|
|
|
// -------------------0x0190
|
|
u8 key1_shortpress_action;
|
|
u8 key1_longpress_action;
|
|
u8 key2_shortpress_action;
|
|
u8 key2_longpress_action;
|
|
|
|
// -------------------0x0198
|
|
#seekto 0x0198;
|
|
ul32 custom_upconv;
|
|
|
|
// -------------------0x0200
|
|
#seekto 0x200;
|
|
struct
|
|
{
|
|
char name[8];
|
|
char number[8];
|
|
} dtmfcontact[16];
|
|
|
|
// -------------------0x0300
|
|
#seekto 0x300;
|
|
struct
|
|
{
|
|
char name[8];
|
|
} list_name[16];
|
|
|
|
//------------------------------- preset
|
|
// -------------------0x0380
|
|
struct
|
|
{
|
|
// ---------------rec 1
|
|
char name[8];
|
|
|
|
// ---------------rec 2
|
|
ul32 freq_low;
|
|
ul32 freq_up;
|
|
|
|
// ---------------rec 3
|
|
u8 rxcode;
|
|
u8 txcode;
|
|
|
|
u8 tx_codetype:4,
|
|
rx_codetype:4;
|
|
|
|
u8 free:1,
|
|
writeprot:1,
|
|
enablescan:1,
|
|
modulation:3,
|
|
shift:2;
|
|
|
|
u8 busylock:1,
|
|
txpower:2,
|
|
bw:4,
|
|
reverse:1;
|
|
|
|
u8 compander:2,
|
|
ptt_id:5,
|
|
dtmfdec:1;
|
|
|
|
u8 squelch:4,
|
|
step:4;
|
|
|
|
u8 scrambler;
|
|
|
|
} preset[12];
|
|
"""
|
|
if IJV_VAR == 0 : # address per 200 Ch
|
|
MEM_2 = """
|
|
#seekto 0x0500;
|
|
"""
|
|
else : # addres 999 Ch
|
|
MEM_2 = """
|
|
#seekto 0x2000;
|
|
"""
|
|
|
|
MEM_3 ="""
|
|
struct
|
|
{
|
|
// ---------------rec 1 + 2
|
|
char name[10];
|
|
u8 code_sel0:4,
|
|
code_sel1:4;
|
|
u8 code_sel2:4,
|
|
code_sel3:4;
|
|
u8 code_sel4:4,
|
|
code_sel5:4;
|
|
u8 code_sel6:4,
|
|
code_sel7:4;
|
|
u8 code_sel8:4,
|
|
code_sel9:4;
|
|
u8 group:4,
|
|
band:4;
|
|
|
|
// ---------------rec 3
|
|
ul32 freq;
|
|
ul32 offset;
|
|
|
|
// ---------------rec 4
|
|
u8 rxcode;
|
|
u8 txcode;
|
|
|
|
u8 tx_codetype:4,
|
|
rx_codetype:4;
|
|
|
|
u8 txlock:1,
|
|
writeprot:1,
|
|
enablescan:1,
|
|
modulation:3,
|
|
shift:2;
|
|
|
|
u8 busylock:1,
|
|
txpower:2,
|
|
bw:4,
|
|
reverse:1;
|
|
|
|
u8 compander:2,
|
|
ptt_id:5,
|
|
dtmfdec:1;
|
|
|
|
u8 squelch:4,
|
|
step:4;
|
|
|
|
u8 scrambler;
|
|
"""
|
|
if IJV_VAR == 0 : # 200 Ch
|
|
MEM_4 = """
|
|
} channel[200];
|
|
"""
|
|
else : # 999 Ch
|
|
MEM_4 = """
|
|
} channel[999];
|
|
"""
|
|
MEM_5 = """
|
|
#seekto 0x1F48;
|
|
u8 batt_cal0;
|
|
u8 batt_cal1;
|
|
u8 batt_cal2;
|
|
u8 batt_cal3;
|
|
u8 batt_cal4;
|
|
u8 batt_cal5;
|
|
u8 batt_cal6;
|
|
"""
|
|
|
|
MEM_FORMAT = MEM_1 + MEM_2 +MEM_3 + MEM_4 + MEM_5
|
|
# //\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\ @variant v3 _ 2 0 0 M E M O R I E //\\//\\//\\//\\//\\//\\//\\//\\//\\
|
|
if IJV_VAR == 0 :
|
|
CHAN_MAX = 200 # 200 Memorie
|
|
MEM_SIZE = 0x2000 # Grandezza massima della memoria
|
|
PROG_SIZE_V = 0x0050 # fine VFO setting
|
|
PROG_SIZE_U = 0x0140 # inizio User setting
|
|
PROG_SIZE = 0x2000 # Grandezza massima Eprom scrittura Setting //\\//\\ Portare da 0x0500 a 0x2000 per scrivere anche i calibration
|
|
PROG_SIZEM = 0x1e00 # Grandezza massima Eprom scrittura Memoria
|
|
START_MEM = 0x0500 # Indirizzo di partenza scrittura memorie
|
|
# //\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\ Impostazione 200 canali //\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\
|
|
else :
|
|
# //\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\ @variant vX3 _ 9 9 9 M E M O R I E //\\//\\//\\//\\//\\//\\//\\//\\//\\
|
|
CHAN_MAX = 999 # 999 Memorie
|
|
MEM_SIZE = 0x9ce0 # Grandezza massima della memoria
|
|
PROG_SIZE_V = 0x0050 # fine VFO setting
|
|
PROG_SIZE_U = 0x0140 # inizio User setting
|
|
PROG_SIZE = 0x2000 # Grandezza massima Eprom scrittura Setting //\\//\\ Portare da 0x0500 a 0x2000 per scrivere anche i calibration
|
|
PROG_SIZEM = 0x9ce0 # Grandezza massima Eprom scrittura Memoria
|
|
START_MEM = 0x2000 # Indirizzo di partenza scrittura memorie
|
|
# //\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\ Impostazione 999 canali //\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\
|
|
|
|
|
|
MEM_BLOCK = 0x80 # largest block of memory that we can reliably write
|
|
|
|
# OFFSET
|
|
OFFSET_NONE = 0b00
|
|
OFFSET_PLUS = 0b01
|
|
OFFSET_MINUS = 0b10
|
|
|
|
|
|
# TX POWER
|
|
|
|
POWER_LOW = 0b00
|
|
POWER_MEDIUM = 0b01
|
|
POWER_HIGH = 0b10
|
|
|
|
TXPOWER_LIST = ["Low","Mid","High"]
|
|
|
|
# BANDWIDTH
|
|
BANDWIDTH_WIDE = 0b00
|
|
BANDWIDTH_NARROW = 0b01
|
|
BANDWIDTH_NARROW_MINUS = 0b10
|
|
BANDWIDTH_WIDE_PLUS = 0b11
|
|
|
|
BANDWIDTH_LIST = ["W 26k",
|
|
"W 23k",
|
|
"W 20k",
|
|
"W 17k",
|
|
"W 14k",
|
|
"W.12k",
|
|
"N 10k",
|
|
"N. 9k",
|
|
"U 7k",
|
|
"U 6k"]
|
|
|
|
MODULATION_LIST = ["FM","AM","USB","CW","WFM"]
|
|
|
|
# dtmf_flags
|
|
PTTID_LIST = ["OFF", "DTMF CALL ID", "DTMF BEGIN", "DTMF END", "DTMF BEG+END", "ZVEI1 BEGIN", "ZVEI1 END",
|
|
"ZVEI1 BEG+END", "ZVEI2 BEGIN", "ZVEI2 END", "ZVEI2 BEG+END", "CCIR-1F BEGIN", "CCIR-1F END",
|
|
"CCIR-1F BEG+END", "CCIR-1 BEGIN", "CCIR-1 END", "CCIR-1 BEG+END", "ROGER Single",
|
|
"ROGER 2Tones", "MDC 1200", "Apollo Quindar" ]
|
|
|
|
# power
|
|
UVK5_POWER_LEVELS = [chirp_common.PowerLevel("Low", watts=1.00),
|
|
chirp_common.PowerLevel("Med", watts=2.50),
|
|
chirp_common.PowerLevel("High", watts=5.00)]
|
|
|
|
# scrambler
|
|
SCRAMBLER_LIST = ["OFF", "2600Hz", "2700Hz", "2800Hz", "2900Hz", "3000Hz", "3100Hz", "3200Hz", "3300Hz", "3400Hz", "3500Hz"]
|
|
|
|
# squelch list
|
|
SQUELCH_LIST = ["Squelch 0","Squelch 1","Squelch 2","Squelch 3","Squelch 4","Squelch 5","Squelch 6","Squelch 7","Squelch 8","Squelch 9","NO RX"]
|
|
|
|
# channel display mode
|
|
CHANNELDISP_LIST = ["Frequency", "Channel No", "Channel Name", "Name_S Freq_L", "Name_L Freq_S"]
|
|
|
|
# VFO/MR
|
|
MR_LIST = ["VFO 1","VFO 2","VFO 3","VFO 4","VFO 5","VFO 6","VFO 7"]
|
|
MRMODE_LIST = ["MEMORY", "VFO"]
|
|
DUALMODE_LIST =["Dual", "Single"]
|
|
|
|
# Beacon
|
|
BEACON_LIST = ["OFF","5 sec","10 sec","30 sec","1 min","3 min","6 min","10 min","20 min"]
|
|
|
|
# battery save
|
|
BATSAVE_LIST = ["OFF", "50%", "67%", "75%", "80%"]
|
|
|
|
# compander
|
|
COMPANDER_LIST = ["OFF", "TX", "RX", "RX/TX"]
|
|
|
|
# mic gain
|
|
MICGAIN_LIST = ["+1.1dB","+4.0dB","+8.0dB","+12.0dB","+15.1dB"]
|
|
|
|
# Talk Time
|
|
TALKTIME_LIST = ["OFF","30s","1min","3min","5min"]
|
|
|
|
# Backlight auto mode
|
|
BACKLIGHT_LIST = ["Off", "5s", "10s", "20s", "1min", "3min", "RX/TX", "ON"]
|
|
|
|
# Crossband receiving/transmitting
|
|
CROSSBAND_LIST = ["SINGLE","DOUBLE","DW_LOCK","DW_LINK","SPLIT"]
|
|
# DUALWATCH_LIST = ["OFF", "On"]
|
|
BANDS_TX_LIST = ["A","B"]
|
|
|
|
# enable scan
|
|
SKIP_VALUES = ["", "S", "P"]
|
|
|
|
# steps 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
|
|
STEPS = [0.01, 0.05, 0.10, 0.50, 1.00, 2.50, 5.00, 6.25, 8.33, 9.00, 10.00, 12.50, 20.00, 25.00, 50.00, 100.00]
|
|
|
|
STEP_LIST = [" 10 Hz",
|
|
" 50 Hz",
|
|
" 100 Hz",
|
|
" 500 Hz",
|
|
" 1 kHz",
|
|
" 2.5 kHz",
|
|
" 5 kHz",
|
|
"6.25 kHz",
|
|
"8.33 kHz",
|
|
" 9 kHz",
|
|
" 10 kHz",
|
|
"12.5 kHz",
|
|
" 20 kHz",
|
|
" 25 kHz",
|
|
" 50 kHz",
|
|
" 100 kHz"]
|
|
|
|
AGC_LIST = ["-84", "-83", "-82", "-81", "-80", "-78", "-76", "-74", "-72", "-70", "-68", "-66", "-62", "-60", "-58",
|
|
"-56", "-52", "-50", "-48", "-46", "-42", "-40", "-38", "-35", "-31", "-29", "-28", "-27", "-26", "-24",
|
|
"-21", "-18", "-16", "-13", "-11", "-8", "-6", "-5", "-3" , "-2" , "-1" , "0" ]
|
|
|
|
AGC_CORR = [18,26,26,26,18,18,18]
|
|
|
|
# ctcss/dcs codes
|
|
TMODES = ["", "Tone", "DTCS", "DTCS"]
|
|
TONE_NONE = 0
|
|
TONE_CTCSS = 1
|
|
TONE_DCS = 2
|
|
TONE_RDCS = 3
|
|
|
|
|
|
CTCSS_TONES = [
|
|
67.0, 69.3, 71.9, 74.4, 77.0, 79.7, 82.5, 85.4,
|
|
88.5, 91.5, 94.8, 97.4, 100.0, 103.5, 107.2, 110.9,
|
|
114.8, 118.8, 123.0, 127.3, 131.8, 136.5, 141.3, 146.2,
|
|
151.4, 156.7, 159.8, 162.2, 165.5, 167.9, 171.3, 173.8,
|
|
177.3, 179.9, 183.5, 186.2, 189.9, 192.8, 196.6, 199.5,
|
|
203.5, 206.5, 210.7, 218.1, 225.7, 229.1, 233.6, 241.8,
|
|
250.3, 254.1,
|
|
]
|
|
|
|
# lifted from ft4.py
|
|
DTCS_CODES = [
|
|
23, 25, 26, 31, 32, 36, 43, 47, 51, 53, 54,
|
|
65, 71, 72, 73, 74, 114, 115, 116, 122, 125, 131,
|
|
132, 134, 143, 145, 152, 155, 156, 162, 165, 172, 174,
|
|
205, 212, 223, 225, 226, 243, 244, 245, 246, 251, 252,
|
|
255, 261, 263, 265, 266, 271, 274, 306, 311, 315, 325,
|
|
331, 332, 343, 346, 351, 356, 364, 365, 371, 411, 412,
|
|
413, 423, 431, 432, 445, 446, 452, 454, 455, 462, 464,
|
|
465, 466, 503, 506, 516, 523, 526, 532, 546, 565, 606,
|
|
612, 624, 627, 631, 632, 654, 662, 664, 703, 712, 723,
|
|
731, 732, 734, 743, 754
|
|
]
|
|
|
|
FLOCK_LIST = ["OFF", "FCC", "CE", "GB", "430", "438"]
|
|
|
|
SCANRESUME_LIST = ["TIME: Resume after 5 seconds",
|
|
"SLOW: Resume slower after signal disappears",
|
|
"FAST: Resume faster after signal disappears",
|
|
"SEARCH: Stop scanning after receiving a signal",
|
|
"LOG"]
|
|
|
|
WELCOME_LIST = ["None", "FW Mod", "Message"]
|
|
|
|
RTE_LIST = ["OFF",
|
|
"1*100ms", "2*100ms", "3*100ms", "4*100ms", "5*100ms",
|
|
"6*100ms", "7*100ms", "8*100ms", "9*100ms", "10*100ms",
|
|
"11*100ms", "12*100ms", "13*100ms", "14*100ms", "15*100ms",
|
|
"16*100ms", "17*100ms", "18*100ms", "19*100ms", "20*100ms"]
|
|
|
|
|
|
|
|
# fm radio supported frequencies
|
|
FMMIN = 76.0
|
|
FMMAX = 108.0
|
|
|
|
|
|
|
|
# Custom Tone f max
|
|
CTMAX = 255.0
|
|
|
|
# bands supported by the UV-K5
|
|
BANDS = {
|
|
0: [15.0, 107.9999],
|
|
1: [108.0, 136.9999],
|
|
2: [137.0, 173.9990],
|
|
3: [174.0, 349.9999],
|
|
4: [350.0, 399.9999],
|
|
5: [400.0, 469.9999],
|
|
6: [470.0, 1299.9999]
|
|
}
|
|
|
|
SPECIALS = {
|
|
# "VFO A1(15-108)": 200,
|
|
# "VFO B1(15-108)": 201,
|
|
# "VFO A2(108-137)": 202,
|
|
# "VFO B2(108-137)": 203,
|
|
# "VFO A3(137-174)": 204,
|
|
# "VFO B3(137-174)": 205,
|
|
# "VFO A4(174-350)": 206,
|
|
# "VFO B4(174-350)": 207,
|
|
# "VFO A5(350-400)": 208,
|
|
# "VFO B5(350-400)": 209,
|
|
# "VFO A6(400-470)": 210,
|
|
# "VFO B6(400-470)": 211,
|
|
# "VFO A7(470-1300)": 212,
|
|
# "VFO B7(470-1300)": 213
|
|
}
|
|
|
|
VFO_CHANNEL_NAMES = ["F1(50M-76M)A", "F1(50M-76M)B",
|
|
"F2(108M-136M)A", "F2(108M-136M)B",
|
|
"F3(136M-174M)A", "F3(136M-174M)B",
|
|
"F4(174M-350M)A", "F4(174M-350M)B",
|
|
"F5(350M-400M)A", "F5(350M-400M)B",
|
|
"F6(400M-470M)A", "F6(400M-470M)B",
|
|
"F7(470M-600M)A", "F7(470M-600M)B"]
|
|
|
|
DTMF_CHARS = "0123456789ABCDEF*# "
|
|
DTMF_CHARS_ID = "0123456789ABCDabcdef#* "
|
|
|
|
DTMF_CHARS_UPDOWN = "0123456789ABCDEFabcdef#* "
|
|
DTMF_CODE_CHARS = "ABCDEF*# "
|
|
DTMF_DECODE_RESPONSE_LIST = ["None", "Ring", "Reply", "Both"]
|
|
|
|
KEYACTIONS_LIST = ["None",
|
|
"Flashlight",
|
|
"TX Power",
|
|
"Monitor",
|
|
"Scan on/off",
|
|
"VOX on/off",
|
|
"FM radio on/off",
|
|
"VFO Change",
|
|
"VFO Swap",
|
|
"SQL +",
|
|
"SQL -",
|
|
"REGA Test",
|
|
"REGA Alarm",
|
|
"CW Call CQ",
|
|
"Preset",
|
|
"AGC MAN",
|
|
"CH LIST",
|
|
"SCRAMBLER"]
|
|
|
|
GROUP_LIST = ["No Group",
|
|
"Group 1",
|
|
"Group 2",
|
|
"Group 3",
|
|
"Group 4",
|
|
"Group 5",
|
|
"Group 6",
|
|
"Group 7",
|
|
"Group 8",
|
|
"Group 9",
|
|
"Group 10",
|
|
"Group 11",
|
|
"Group 12",
|
|
"Group 13",
|
|
"Group 14",
|
|
"Group 15"]
|
|
|
|
UPCONV_LIST = ["OFF","50 MHz", "125 MHz","CUSTOM"]
|
|
|
|
EMPTY_MEM = [0,0,0,0,0,0,0,0,0,0,0xEE,0xEE,0xEE,0xEE,0xEE,0,
|
|
0,0,0,0,0,0,0,0,0,0,0 ,0 ,0 ,0 ,0 ,0]
|
|
|
|
|
|
#--------------------------------------------------------------------------------
|
|
# nibble to ascii
|
|
def hexasc(data):
|
|
res = data
|
|
if res<=9:
|
|
return chr(res+48)
|
|
elif data == 0xA:
|
|
return "A"
|
|
elif data == 0xB:
|
|
return "B"
|
|
elif data == 0xC:
|
|
return "C"
|
|
elif data == 0xD:
|
|
return "D"
|
|
elif data == 0xF:
|
|
return "F"
|
|
else:
|
|
return " "
|
|
|
|
#--------------------------------------------------------------------------------
|
|
# nibble to ascii
|
|
def ascdec(data):
|
|
|
|
if data == "0":
|
|
return 0
|
|
elif data == "1":
|
|
return 1
|
|
elif data == "2":
|
|
return 2
|
|
elif data == "3":
|
|
return 3
|
|
elif data == "4":
|
|
return 4
|
|
elif data == "5":
|
|
return 5
|
|
elif data == "6":
|
|
return 6
|
|
elif data == "7":
|
|
return 7
|
|
elif data == "8":
|
|
return 8
|
|
elif data == "9":
|
|
return 9
|
|
elif data == "A":
|
|
return 10
|
|
elif data == "B":
|
|
return 11
|
|
elif data == "C":
|
|
return 12
|
|
elif data == "D":
|
|
return 13
|
|
elif data == "F":
|
|
return 15
|
|
else:
|
|
return 14
|
|
|
|
|
|
#--------------------------------------------------------------------------------
|
|
# the communication is obfuscated using this fine mechanism
|
|
def xorarr(data: bytes):
|
|
tbl = [22, 108, 20, 230, 46, 145, 13, 64, 33, 53, 213, 64, 19, 3, 233, 128]
|
|
x = b""
|
|
r = 0
|
|
for byte in data:
|
|
x += bytes([byte ^ tbl[r]])
|
|
r = (r+1) % len(tbl)
|
|
return x
|
|
|
|
#--------------------------------------------------------------------------------
|
|
# if this crc was used for communication to AND from the radio, then it
|
|
# would be a measure to increase reliability.
|
|
# but it's only used towards the radio, so it's for further obfuscation
|
|
def calculate_crc16_xmodem(data: bytes):
|
|
poly = 0x1021
|
|
crc = 0x0
|
|
for byte in data:
|
|
crc = crc ^ (byte << 8)
|
|
for i in range(8):
|
|
crc = crc << 1
|
|
if (crc & 0x10000):
|
|
crc = (crc ^ poly) & 0xFFFF
|
|
return crc & 0xFFFF
|
|
|
|
#--------------------------------------------------------------------------------
|
|
def _send_command(serport, data: bytes):
|
|
"""Send a command to UV-K5 radio"""
|
|
LOG.debug("Sending command (unobfuscated) len=0x%4.4x:\n%s" %
|
|
(len(data), util.hexprint(data)))
|
|
|
|
crc = calculate_crc16_xmodem(data)
|
|
data2 = data + struct.pack("<H", crc)
|
|
|
|
command = struct.pack(">HBB", 0xabcd, len(data), 0) + \
|
|
xorarr(data2) + \
|
|
struct.pack(">H", 0xdcba)
|
|
if DEBUG_SHOW_OBFUSCATED_COMMANDS:
|
|
LOG.debug("Sending command (obfuscated):\n%s" % util.hexprint(command))
|
|
try:
|
|
result = serport.write(command)
|
|
except Exception:
|
|
raise errors.RadioError("Error writing data to radio")
|
|
return result
|
|
|
|
#--------------------------------------------------------------------------------
|
|
def _receive_reply(serport):
|
|
header = serport.read(4)
|
|
if len(header) != 4:
|
|
LOG.warning("Header short read: [%s] len=%i" %
|
|
(util.hexprint(header), len(header)))
|
|
raise errors.RadioError("Header short read")
|
|
if header[0] != 0xAB or header[1] != 0xCD or header[3] != 0x00:
|
|
LOG.warning("Bad response header: %s len=%i" %
|
|
(util.hexprint(header), len(header)))
|
|
raise errors.RadioError("Bad response header")
|
|
|
|
cmd = serport.read(int(header[2]))
|
|
if len(cmd) != int(header[2]):
|
|
LOG.warning("Body short read: [%s] len=%i" %
|
|
(util.hexprint(cmd), len(cmd)))
|
|
raise errors.RadioError("Command body short read")
|
|
|
|
footer = serport.read(4)
|
|
|
|
if len(footer) != 4:
|
|
LOG.warning("Footer short read: [%s] len=%i" %
|
|
(util.hexprint(footer), len(footer)))
|
|
raise errors.RadioError("Footer short read")
|
|
|
|
if footer[2] != 0xDC or footer[3] != 0xBA:
|
|
LOG.debug(
|
|
"Reply before bad response footer (obfuscated)"
|
|
"len=0x%4.4x:\n%s" % (len(cmd), util.hexprint(cmd)))
|
|
LOG.warning("Bad response footer: %s len=%i" %
|
|
(util.hexprint(footer), len(footer)))
|
|
raise errors.RadioError("Bad response footer")
|
|
|
|
if DEBUG_SHOW_OBFUSCATED_COMMANDS:
|
|
LOG.debug("Received reply (obfuscated) len=0x%4.4x:\n%s" %
|
|
(len(cmd), util.hexprint(cmd)))
|
|
|
|
cmd2 = xorarr(cmd)
|
|
|
|
LOG.debug("Received reply (unobfuscated) len=0x%4.4x:\n%s" %
|
|
(len(cmd2), util.hexprint(cmd2)))
|
|
|
|
return cmd2
|
|
|
|
#--------------------------------------------------------------------------------
|
|
def _getstring(data: bytes, begin, maxlen):
|
|
tmplen = min(maxlen+1, len(data))
|
|
s = [data[i] for i in range(begin, tmplen)]
|
|
for key, val in enumerate(s):
|
|
if val < ord(' ') or val > ord('~'):
|
|
break
|
|
return ''.join(chr(x) for x in s[0:key])
|
|
|
|
#--------------------------------------------------------------------------------
|
|
def _sayhello(serport):
|
|
hellopacket = b"\x14\x05\x04\x00\x6a\x39\x57\x64"
|
|
|
|
tries = 5
|
|
while True:
|
|
LOG.debug("Sending hello packet")
|
|
_send_command(serport, hellopacket)
|
|
o = _receive_reply(serport)
|
|
if (o):
|
|
break
|
|
tries -= 1
|
|
if tries == 0:
|
|
LOG.warning("Failed to initialise radio")
|
|
raise errors.RadioError("Failed to initialize radio")
|
|
firmware = _getstring(o, 4, 16)
|
|
LOG.info("Found firmware: %s" % firmware)
|
|
return firmware
|
|
|
|
#--------------------------------------------------------------------------------
|
|
def _readmem(serport, offset, length):
|
|
LOG.debug("Sending readmem offset=0x%4.4x len=0x%4.4x" % (offset, length))
|
|
|
|
readmem = b"\x1b\x05\x08\x00" + \
|
|
struct.pack("<HBB", offset, length, 0) + \
|
|
b"\x6a\x39\x57\x64"
|
|
_send_command(serport, readmem)
|
|
o = _receive_reply(serport)
|
|
if DEBUG_SHOW_MEMORY_ACTIONS:
|
|
LOG.debug("readmem Received data len=0x%4.4x:\n%s" %
|
|
(len(o), util.hexprint(o)))
|
|
return o[8:]
|
|
|
|
#--------------------------------------------------------------------------------
|
|
def _writemem(serport, data, offset):
|
|
LOG.debug("Sending writemem offset=0x%4.4x len=0x%4.4x" %
|
|
(offset, len(data)))
|
|
|
|
if DEBUG_SHOW_MEMORY_ACTIONS:
|
|
LOG.debug("writemem sent data offset=0x%4.4x len=0x%4.4x:\n%s" %
|
|
(offset, len(data), util.hexprint(data)))
|
|
|
|
dlen = len(data)
|
|
writemem = b"\x1d\x05" + \
|
|
struct.pack("<BBHBB", dlen+8, 0, offset, dlen, 1) + \
|
|
b"\x6a\x39\x57\x64"+data
|
|
|
|
_send_command(serport, writemem)
|
|
o = _receive_reply(serport)
|
|
|
|
LOG.debug("writemem Received data: %s len=%i" % (util.hexprint(o), len(o)))
|
|
|
|
if (o[0] == 0x1e
|
|
and
|
|
o[4] == (offset & 0xff)
|
|
and
|
|
o[5] == (offset >> 8) & 0xff):
|
|
return True
|
|
else:
|
|
LOG.warning("Bad data from writemem")
|
|
raise errors.RadioError("Bad response to writemem")
|
|
|
|
#--------------------------------------------------------------------------------
|
|
def _resetradio(serport):
|
|
resetpacket = b"\xdd\x05\x00\x00"
|
|
_send_command(serport, resetpacket)
|
|
|
|
#------------------------------Lettura Eprom--------------------------------------------------
|
|
def do_download(radio):
|
|
serport = radio.pipe
|
|
serport.timeout = 0.5
|
|
status = chirp_common.Status()
|
|
status.cur = 0
|
|
status.max = MEM_SIZE
|
|
status.msg = "Downloading from radio"
|
|
radio.status_fn(status)
|
|
|
|
eeprom = b""
|
|
f = _sayhello(serport)
|
|
if f:
|
|
radio.FIRMWARE_VERSION = f
|
|
else:
|
|
raise errors.RadioError('Unable to determine firmware version')
|
|
|
|
addr = 0
|
|
while addr < MEM_SIZE:
|
|
o = _readmem(serport, addr, MEM_BLOCK)
|
|
status.cur = addr
|
|
radio.status_fn(status)
|
|
|
|
if o and len(o) == MEM_BLOCK:
|
|
eeprom += o
|
|
addr += MEM_BLOCK
|
|
else:
|
|
raise errors.RadioError("Memory download incomplete")
|
|
|
|
return memmap.MemoryMapBytes(eeprom)
|
|
|
|
#-------------------------------Scrittura Eprom-------------------------------------------------
|
|
def do_upload(radio):
|
|
serport = radio.pipe
|
|
serport.timeout = 0.5
|
|
status = chirp_common.Status()
|
|
status.cur = 0
|
|
status.max = PROG_SIZE
|
|
status.msg = "Uploading VFO Setting to radio"
|
|
radio.status_fn(status)
|
|
|
|
f = _sayhello(serport)
|
|
if f:
|
|
radio.FIRMWARE_VERSION = f
|
|
else:
|
|
return False
|
|
#---------------Scrittura setting 1
|
|
addr = 0
|
|
while addr < PROG_SIZE_V:
|
|
o = radio.get_mmap()[addr:addr+MEM_BLOCK]
|
|
_writemem(serport, o, addr)
|
|
status.cur = addr
|
|
radio.status_fn(status)
|
|
if o:
|
|
addr += MEM_BLOCK
|
|
else:
|
|
raise errors.RadioError("Upload VFO incomplete")
|
|
status.msg = "Uploading User Setting to radio"
|
|
#---------------Scrittura setting 2
|
|
addr = PROG_SIZE_U
|
|
while addr < PROG_SIZE:
|
|
o = radio.get_mmap()[addr:addr+MEM_BLOCK]
|
|
_writemem(serport, o, addr)
|
|
status.cur = addr
|
|
radio.status_fn(status)
|
|
if o:
|
|
addr += MEM_BLOCK
|
|
else:
|
|
raise errors.RadioError("Upload User Setting incomplete")
|
|
status.msg = "Uploading Memory to radio"
|
|
#----------------Scrittura Memorie
|
|
status.max = PROG_SIZEM
|
|
status.cur = 0
|
|
addr = START_MEM
|
|
|
|
while addr < PROG_SIZEM:
|
|
o = radio.get_mmap()[addr:addr+MEM_BLOCK]
|
|
_writemem(serport, o, addr)
|
|
status.cur = addr
|
|
radio.status_fn(status)
|
|
if o:
|
|
addr += MEM_BLOCK
|
|
else:
|
|
raise errors.RadioError("Memory upload incomplete")
|
|
status.msg = "Uploaded OK"
|
|
|
|
_resetradio(serport)
|
|
|
|
return True
|
|
|
|
#--------------------------------------------------------------------------------
|
|
def _find_band(hz):
|
|
mhz = hz/1000000.0
|
|
|
|
B = BANDS
|
|
|
|
for a in B:
|
|
if mhz >= B[a][0] and mhz <= B[a][1]:
|
|
return a
|
|
|
|
return False
|
|
|
|
################################################################################################################################
|
|
|
|
################################################################################################################################
|
|
|
|
@directory.register
|
|
class UVK5Radio(chirp_common.CloneModeRadio):
|
|
"""Quansheng UV-K5"""
|
|
VENDOR = "Quansheng"
|
|
MODEL = "UV-K5"
|
|
if IJV_VAR == 0 :
|
|
VARIANT = "IJV_V3" # @variant v3
|
|
else:
|
|
VARIANT = "IJV_VX3" # @variant vX3
|
|
BAUD_RATE = 38400
|
|
NEEDS_COMPAT_SERIAL = False
|
|
FIRMWARE_VERSION = "300"
|
|
_expanded_limits = True
|
|
|
|
#--------------------------------------------------------------------------------
|
|
def get_prompts(x=None):
|
|
rp = chirp_common.RadioPrompts()
|
|
rp.experimental = _(
|
|
'This is an experimental driver for the Quansheng UV-K5. '
|
|
'It may harm your radio, or worse. Use at your own risk.\n\n'
|
|
'Before attempting to do any changes please download '
|
|
'the memory image from the radio with chirp '
|
|
'and keep it. This can be later used to recover the '
|
|
'original settings. \n\n'
|
|
'some details are not yet implemented')
|
|
rp.pre_download = _(
|
|
"1. Turn radio on.\n"
|
|
"2. Connect cable to mic/spkr connector.\n"
|
|
"3. Make sure connector is firmly connected.\n"
|
|
"4. Click OK to download image from device.\n\n"
|
|
"It will may not work if you turn on the radio "
|
|
"with the cable already attached\n")
|
|
rp.pre_upload = _(
|
|
"1. Turn radio on.\n"
|
|
"2. Connect cable to mic/spkr connector.\n"
|
|
"3. Make sure connector is firmly connected.\n"
|
|
"4. Click OK to upload the image to device.\n\n"
|
|
"It will may not work if you turn on the radio "
|
|
"with the cable already attached")
|
|
return rp
|
|
|
|
#-------------------------------------------------------------------------------- # Return information about this radio's features, including
|
|
# how many memories it has, what bands it supports, etc
|
|
def get_features(self):
|
|
rf = chirp_common.RadioFeatures()
|
|
rf.has_bank = False
|
|
rf.has_rx_dtcs = True
|
|
rf.has_ctone = True
|
|
rf.has_settings = True
|
|
rf.has_comment = False
|
|
|
|
rf.valid_dtcs_codes = DTCS_CODES
|
|
rf.valid_name_length = 10
|
|
rf.valid_power_levels = UVK5_POWER_LEVELS
|
|
rf.valid_special_chans = list(SPECIALS.keys())
|
|
rf.valid_duplexes = ["", "-", "+", "off"]
|
|
rf.valid_tuning_steps = STEPS
|
|
rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"]
|
|
rf.valid_cross_modes = ["Tone->Tone", "Tone->DTCS", "DTCS->Tone","->Tone", "->DTCS", "DTCS->", "DTCS->DTCS"]
|
|
rf.valid_characters = chirp_common.CHARSET_ASCII
|
|
rf.valid_modes = ["FM", "AM", "USB", "CW", "WFM"]
|
|
rf.valid_skips = ["", "S"]
|
|
rf._expanded_limits = True
|
|
|
|
# This radio supports memories 1-200 / 1-999
|
|
rf.memory_bounds = (1, CHAN_MAX)
|
|
|
|
rf.valid_bands = []
|
|
for a in BANDS:
|
|
rf.valid_bands.append(
|
|
(int(BANDS[a][0]*1000000),
|
|
int(BANDS[a][1]*1000000)))
|
|
return rf
|
|
#--------------------------------------------------------------------------------
|
|
# Do a download of the radio from the serial port
|
|
def sync_in(self):
|
|
self._mmap = do_download(self)
|
|
self.process_mmap()
|
|
#--------------------------------------------------------------------------------
|
|
# Do an upload of the radio to the serial port
|
|
def sync_out(self):
|
|
do_upload(self)
|
|
#--------------------------------------------------------------------------------
|
|
# Convert the raw byte array into a memory object structure
|
|
def process_mmap(self):
|
|
self._memobj = bitwise.parse(MEM_FORMAT, self._mmap)
|
|
#--------------------------------------------------------------------------------
|
|
# Return a raw representation of the memory object, which
|
|
# is very helpful for development
|
|
def get_raw_memory(self, number):
|
|
return repr(self._memobj.channel[number-1])
|
|
#-------------------------------------------------------------------------------- VALIDAZIONE MEMORIA
|
|
def validate_memory(self, mem):
|
|
msgs = super().validate_memory(mem)
|
|
|
|
if mem.duplex == 'off':
|
|
return msgs
|
|
|
|
# find tx frequency
|
|
if mem.duplex == '-':
|
|
txfreq = mem.freq - mem.offset
|
|
elif mem.duplex == '+':
|
|
txfreq = mem.freq + mem.offset
|
|
else:
|
|
txfreq = mem.freq
|
|
|
|
# find band
|
|
band = _find_band(txfreq)
|
|
if band is False:
|
|
msg = "Transmit frequency %.4f MHz is not supported by this radio" % (txfreq/1000000.0)
|
|
msgs.append(chirp_common.ValidationError(msg))
|
|
|
|
band = _find_band(mem.freq)
|
|
if band is False:
|
|
msg = "The frequency %.4f MHz is not supported by this radio" % (mem.freq/1000000.0)
|
|
msgs.append(chirp_common.ValidationError(msg))
|
|
|
|
return msgs
|
|
#-------------------------------------------------------------------------------- IMPOSTA TONI
|
|
def _set_tone(self, mem, _mem):
|
|
((txmode, txtone, txpol),
|
|
(rxmode, rxtone, rxpol)) = chirp_common.split_tone_encode(mem)
|
|
|
|
if txmode == "Tone":
|
|
txtoval = CTCSS_TONES.index(txtone)
|
|
txmoval = 0b01
|
|
elif txmode == "DTCS":
|
|
txmoval = txpol == "R" and 0b11 or 0b10
|
|
txtoval = DTCS_CODES.index(txtone)
|
|
else:
|
|
txmoval = 0
|
|
txtoval = 0
|
|
|
|
if rxmode == "Tone":
|
|
rxtoval = CTCSS_TONES.index(rxtone)
|
|
rxmoval = 0b01
|
|
elif rxmode == "DTCS":
|
|
rxmoval = rxpol == "R" and 0b11 or 0b10
|
|
rxtoval = DTCS_CODES.index(rxtone)
|
|
else:
|
|
rxmoval = 0
|
|
rxtoval = 0
|
|
|
|
_mem.rx_codetype = rxmoval
|
|
_mem.tx_codetype = txmoval
|
|
_mem.rxcode = rxtoval
|
|
_mem.txcode = txtoval
|
|
|
|
#-------------------------------------------------------------------------------- LEGGI TONI
|
|
def _get_tone(self, mem, _mem):
|
|
rxtype = _mem.rx_codetype
|
|
txtype = _mem.tx_codetype
|
|
|
|
rx_tmode = TMODES[rxtype]
|
|
tx_tmode = TMODES[txtype]
|
|
|
|
rx_tone = tx_tone = None
|
|
|
|
if tx_tmode == "Tone":
|
|
if _mem.txcode < len(CTCSS_TONES):
|
|
tx_tone = CTCSS_TONES[_mem.txcode]
|
|
else:
|
|
tx_tone = 0
|
|
tx_tmode = ""
|
|
elif tx_tmode == "DTCS":
|
|
if _mem.txcode < len(DTCS_CODES):
|
|
tx_tone = DTCS_CODES[_mem.txcode]
|
|
else:
|
|
tx_tone = 0
|
|
tx_tmode = ""
|
|
|
|
if rx_tmode == "Tone":
|
|
if _mem.rxcode < len(CTCSS_TONES):
|
|
rx_tone = CTCSS_TONES[_mem.rxcode]
|
|
else:
|
|
rx_tone = 0
|
|
rx_tmode = ""
|
|
elif rx_tmode == "DTCS":
|
|
if _mem.rxcode < len(DTCS_CODES):
|
|
rx_tone = DTCS_CODES[_mem.rxcode]
|
|
else:
|
|
rx_tone = 0
|
|
rx_tmode = ""
|
|
|
|
tx_pol = txtype == 0x03 and "R" or "N"
|
|
rx_pol = rxtype == 0x03 and "R" or "N"
|
|
|
|
chirp_common.split_tone_decode(mem, (tx_tmode, tx_tone, tx_pol),(rx_tmode, rx_tone, rx_pol))
|
|
|
|
|
|
################################################################################################################################
|
|
# L E T T U R A M E M O R I E
|
|
################################################################################################################################
|
|
|
|
#--------------------------------------------------------------------------------
|
|
# Extract a high-level memory object from the low-level memory map
|
|
# This is called to populate a memory in the UI
|
|
def get_memory(self, number2):
|
|
|
|
_mem = self._memobj
|
|
for i in range(0, 16):
|
|
GROUP_LIST[i] = str(_mem.list_name[i].name).strip("\x00\xff")
|
|
if GROUP_LIST[i].startswith(" "):
|
|
GROUP_LIST[i] = "----- "
|
|
|
|
|
|
mem = chirp_common.Memory()
|
|
|
|
if isinstance(number2, str):
|
|
number = SPECIALS[number2]
|
|
mem.extd_number = number2
|
|
else:
|
|
number = number2 - 1
|
|
|
|
mem.number = number + 1
|
|
|
|
_mem = self._memobj.channel[number]
|
|
|
|
tmpcomment = ""
|
|
|
|
is_empty = False
|
|
# We'll consider any blank (i.e. 0 MHz frequency) to be empty
|
|
if (_mem.freq == 0xffffffff) or (_mem.freq == 0) or (_mem.band == 0xF):
|
|
is_empty = True
|
|
|
|
if is_empty:
|
|
mem.empty = True
|
|
# set some sane defaults:
|
|
mem.power = UVK5_POWER_LEVELS[2]
|
|
mem.extra = RadioSettingGroup("Extra", "extra")
|
|
|
|
rs = RadioSetting("bandwidth", "Bandwidth", RadioSettingValueList(BANDWIDTH_LIST, BANDWIDTH_LIST[0]))
|
|
mem.extra.append(rs)
|
|
|
|
rs = RadioSetting("frev", "FreqRev", RadioSettingValueBoolean(False))
|
|
mem.extra.append(rs)
|
|
|
|
rs = RadioSetting("pttid", "PTTID", RadioSettingValueList(PTTID_LIST, PTTID_LIST[0]))
|
|
mem.extra.append(rs)
|
|
|
|
rs = RadioSetting("dtmfdecode", _("DTMF decode"), RadioSettingValueBoolean(False))
|
|
mem.extra.append(rs)
|
|
|
|
rs = RadioSetting("scrambler", _("Scrambler"), RadioSettingValueList(SCRAMBLER_LIST, SCRAMBLER_LIST[0]))
|
|
mem.extra.append(rs)
|
|
|
|
rs = RadioSetting("compander", _("Compander"), RadioSettingValueList(COMPANDER_LIST, COMPANDER_LIST[0]))
|
|
mem.extra.append(rs)
|
|
|
|
rs = RadioSetting("squelch", _("Squelch"), RadioSettingValueList(SQUELCH_LIST, SQUELCH_LIST[1]))
|
|
mem.extra.append(rs)
|
|
|
|
rs = RadioSetting("writeprot", _("Write Protect"), RadioSettingValueBoolean(False))
|
|
mem.extra.append(rs)
|
|
|
|
rs = RadioSetting("txlock", _("TX Lock"), RadioSettingValueBoolean(False))
|
|
mem.extra.append(rs)
|
|
|
|
rs = RadioSetting("group", "Group", RadioSettingValueList(GROUP_LIST, GROUP_LIST[0]))
|
|
mem.extra.append(rs)
|
|
|
|
rs = RadioSetting("busylock", "Busy Lock", RadioSettingValueBoolean(False))
|
|
mem.extra.append(rs)
|
|
|
|
# actually the step and duplex are overwritten by chirp based on
|
|
# bandplan. they are here to document sane defaults for IARU r1
|
|
# mem.tuning_step = 25.0
|
|
# mem.duplex = ""
|
|
|
|
return mem
|
|
|
|
if number > (CHAN_MAX-1):
|
|
mem.immutable = ["name", "scanlists"]
|
|
else:
|
|
_mem2 = self._memobj.channel[number]
|
|
for char in _mem2.name:
|
|
if str(char) == "\xFF" or str(char) == "\x00":
|
|
break
|
|
mem.name += str(char)
|
|
|
|
tag = mem.name.strip()
|
|
mem.name = tag
|
|
|
|
# Convert your low-level frequency to Hertz
|
|
mem.freq = int(_mem.freq)*10
|
|
mem.offset = int(_mem.offset)*10
|
|
|
|
if (mem.offset == 0):
|
|
mem.duplex = ''
|
|
else:
|
|
if _mem.shift == OFFSET_MINUS:
|
|
if _mem.freq == _mem.offset:
|
|
# fake tx disable by setting tx to 0 MHz
|
|
mem.duplex = 'off'
|
|
mem.offset = 0
|
|
else:
|
|
mem.duplex = '-'
|
|
elif _mem.shift == OFFSET_PLUS:
|
|
mem.duplex = '+'
|
|
else:
|
|
mem.duplex = ''
|
|
|
|
# tone data
|
|
self._get_tone(mem, _mem)
|
|
|
|
# mode
|
|
mem.mode = MODULATION_LIST[_mem.modulation]
|
|
|
|
# tuning step
|
|
tstep = _mem.step
|
|
if tstep < len(STEPS):
|
|
mem.tuning_step = STEPS[tstep]
|
|
else:
|
|
mem.tuning_step = 0.02
|
|
|
|
# enable scan
|
|
mem.skip = SKIP_VALUES[_mem.enablescan]
|
|
|
|
# power
|
|
if _mem.txpower == POWER_HIGH:
|
|
mem.power = UVK5_POWER_LEVELS[2]
|
|
elif _mem.txpower == POWER_MEDIUM:
|
|
mem.power = UVK5_POWER_LEVELS[1]
|
|
else:
|
|
mem.power = UVK5_POWER_LEVELS[0]
|
|
|
|
# We'll consider any blank (i.e. 0 MHz frequency) to be empty
|
|
if (_mem.freq == 0xffffffff) or (_mem.freq == 0):
|
|
mem.empty = True
|
|
else:
|
|
mem.empty = False
|
|
|
|
mem.extra = RadioSettingGroup("Extra", "extra")
|
|
|
|
# bandwidth
|
|
bwidth = _mem.bw
|
|
if bwidth > len(BANDWIDTH_LIST):
|
|
bwidth = 0
|
|
rs = RadioSetting("bandwidth", "Bandwidth", RadioSettingValueList(BANDWIDTH_LIST, BANDWIDTH_LIST[bwidth]))
|
|
mem.extra.append(rs)
|
|
tmpcomment += "bandwidth:"+BANDWIDTH_LIST[bwidth]+" "
|
|
|
|
# Group List
|
|
group = _mem.group
|
|
if group > len(GROUP_LIST):
|
|
group = 0
|
|
rs = RadioSetting("group", "Group", RadioSettingValueList(GROUP_LIST, GROUP_LIST[group]))
|
|
mem.extra.append(rs)
|
|
tmpcomment += GROUP_LIST[group]+" "
|
|
|
|
# Frequency reverse - whatever that means, don't see it in the manual
|
|
is_frev = bool(_mem.reverse > 0)
|
|
rs = RadioSetting("frev", "FreqRev", RadioSettingValueBoolean(is_frev))
|
|
mem.extra.append(rs)
|
|
tmpcomment += "FreqReverse:"+(is_frev and "ON" or "OFF")+" "
|
|
|
|
# PTTID
|
|
pttid = _mem.ptt_id
|
|
if pttid > len(PTTID_LIST):
|
|
pttid = 0
|
|
rs = RadioSetting("pttid", "PTTID", RadioSettingValueList(PTTID_LIST, PTTID_LIST[pttid]))
|
|
mem.extra.append(rs)
|
|
tmpcomment += "PTTid:"+PTTID_LIST[pttid]+" "
|
|
|
|
# CODICI SELETTIVE
|
|
|
|
codesel = hexasc(_mem.code_sel0) + \
|
|
hexasc(_mem.code_sel1) + \
|
|
hexasc(_mem.code_sel2) + \
|
|
hexasc(_mem.code_sel3) + \
|
|
hexasc(_mem.code_sel4) + \
|
|
hexasc(_mem.code_sel5) + \
|
|
hexasc(_mem.code_sel6) + \
|
|
hexasc(_mem.code_sel7) + \
|
|
hexasc(_mem.code_sel8) + \
|
|
hexasc(_mem.code_sel9)
|
|
|
|
rs = RadioSetting("codesel", "Code PTTID", RadioSettingValueString(0, 10, codesel))
|
|
mem.extra.append(rs)
|
|
tmpcomment += "PTTid Codes:"+codesel+" "
|
|
|
|
# DTMF DECODE
|
|
is_dtmf = bool(_mem.dtmfdec > 0)
|
|
rs = RadioSetting("dtmfdecode", _("DTMF decode"), RadioSettingValueBoolean(is_dtmf))
|
|
mem.extra.append(rs)
|
|
tmpcomment += "DTMFdecode:"+(is_dtmf and "ON" or "OFF")+" "
|
|
|
|
# Scrambler
|
|
if _mem.scrambler < len(SCRAMBLER_LIST):
|
|
enc = _mem.scrambler
|
|
else:
|
|
enc = 0
|
|
|
|
rs = RadioSetting("scrambler", _("Scrambler"), RadioSettingValueList(SCRAMBLER_LIST, SCRAMBLER_LIST[enc]))
|
|
mem.extra.append(rs)
|
|
tmpcomment += "Scrambler:"+SCRAMBLER_LIST[enc]+" "
|
|
|
|
# compander
|
|
comp = _mem.compander
|
|
rs = RadioSetting("compander", _("Compander"), RadioSettingValueList(COMPANDER_LIST, COMPANDER_LIST[comp]))
|
|
mem.extra.append(rs)
|
|
tmpcomment += "Compander:"+COMPANDER_LIST[comp]+" "
|
|
|
|
# Squelch
|
|
if _mem.squelch < len(SQUELCH_LIST):
|
|
sql = _mem.squelch
|
|
else:
|
|
sql = 1
|
|
|
|
rs = RadioSetting("squelch", _("Squelch"), RadioSettingValueList(SQUELCH_LIST, SQUELCH_LIST[sql]))
|
|
mem.extra.append(rs)
|
|
tmpcomment += SQUELCH_LIST[sql]+" "
|
|
|
|
# BusyLock
|
|
bl = bool(_mem.busylock > 0)
|
|
rs = RadioSetting("busylock", "Busy Lock", RadioSettingValueBoolean(bl))
|
|
mem.extra.append(rs)
|
|
tmpcomment += "Busy Lock:"+(bl and "ON" or "OFF")+" "
|
|
|
|
# Write Protect
|
|
wp = bool(_mem.writeprot > 0)
|
|
rs = RadioSetting("writeprot", _("Write Protect"), RadioSettingValueBoolean(wp))
|
|
mem.extra.append(rs)
|
|
tmpcomment += "Write Protect:"+(wp and "ON" or "OFF")+" "
|
|
|
|
# TX Lock
|
|
wp = bool(_mem.txlock > 0)
|
|
rs = RadioSetting("txlock", _("TX Lock"), RadioSettingValueBoolean(wp))
|
|
mem.extra.append(rs)
|
|
tmpcomment += "TX Lock:"+(wp and "ON" or "OFF")+" "
|
|
|
|
return mem
|
|
|
|
|
|
################################################################################################################################
|
|
# S A L V A T A G G I O M E M O R I E
|
|
################################################################################################################################
|
|
|
|
#--------------------------------------------------------------------------------
|
|
# Store details about a high-level memory to the memory map
|
|
# This is called when a user edits a memory in the UI
|
|
def set_memory(self, mem):
|
|
number = mem.number-1
|
|
|
|
if number > CHAN_MAX:
|
|
return mem
|
|
|
|
# Get a low-level memory object mapped to the image
|
|
_mem = self._memobj.channel[number]
|
|
|
|
# this was an empty memory
|
|
if _mem.get_raw(asbytes=False)[0] == "\xff":
|
|
_mem.set_raw("\x00" * 32)
|
|
_mem.code_sel0 = 14
|
|
_mem.code_sel1 = 14
|
|
_mem.code_sel2 = 14
|
|
_mem.code_sel3 = 14
|
|
_mem.code_sel4 = 14
|
|
_mem.code_sel5 = 14
|
|
_mem.code_sel6 = 14
|
|
_mem.code_sel7 = 14
|
|
_mem.code_sel8 = 14
|
|
_mem.code_sel9 = 14
|
|
|
|
# find band
|
|
_mem.band = _find_band(mem.freq)
|
|
|
|
# mode
|
|
|
|
_mem.modulation = MODULATION_LIST.index(mem.mode)
|
|
|
|
# frequency/offset
|
|
_mem.freq = mem.freq/10
|
|
_mem.offset = mem.offset/10
|
|
|
|
if mem.duplex == "":
|
|
_mem.offset = 0
|
|
_mem.shift = 0
|
|
elif mem.duplex == '-':
|
|
_mem.shift = OFFSET_MINUS
|
|
elif mem.duplex == '+':
|
|
_mem.shift = OFFSET_PLUS
|
|
elif mem.duplex == 'off':
|
|
#
|
|
_mem.shift = OFFSET_MINUS
|
|
_mem.offset = _mem.freq
|
|
|
|
# name
|
|
tag = mem.name.ljust(10)
|
|
_mem.name = tag
|
|
|
|
# tone data
|
|
self._set_tone(mem, _mem)
|
|
|
|
# step
|
|
_mem.step = STEPS.index(mem.tuning_step)
|
|
|
|
# tx power
|
|
if str(mem.power) == str(UVK5_POWER_LEVELS[2]):
|
|
_mem.txpower = POWER_HIGH
|
|
elif str(mem.power) == str(UVK5_POWER_LEVELS[1]):
|
|
_mem.txpower = POWER_MEDIUM
|
|
else:
|
|
_mem.txpower = POWER_LOW
|
|
|
|
# enable scan
|
|
_mem.enablescan = SKIP_VALUES.index(mem.skip)
|
|
|
|
#extra
|
|
for setting in mem.extra:
|
|
sname = setting.get_name()
|
|
svalue = setting.value.get_value()
|
|
|
|
if sname == "bandwidth":
|
|
_mem.bw = BANDWIDTH_LIST.index(svalue)
|
|
|
|
if sname == "pttid":
|
|
_mem.ptt_id = PTTID_LIST.index(svalue)
|
|
|
|
if sname == "frev":
|
|
_mem.reverse = svalue and 1 or 0
|
|
|
|
if sname == "dtmfdecode":
|
|
_mem.dtmfdec = svalue and 1 or 0
|
|
|
|
if sname == "scrambler":
|
|
_mem.scrambler = (_mem.scrambler & 0xf0) | SCRAMBLER_LIST.index(svalue)
|
|
|
|
if sname == "compander":
|
|
_mem.compander = (_mem.compander & 0xf0) | COMPANDER_LIST.index(svalue)
|
|
|
|
if sname == "group":
|
|
_mem.group = GROUP_LIST.index(svalue)
|
|
|
|
if sname == "squelch":
|
|
_mem.squelch = SQUELCH_LIST.index(svalue)
|
|
|
|
if sname == "busylock":
|
|
_mem.busylock = svalue and 1 or 0
|
|
|
|
if sname == "writeprot":
|
|
_mem.writeprot = svalue and 1 or 0
|
|
|
|
if sname == "txlock":
|
|
_mem.txlock = svalue and 1 or 0
|
|
|
|
if sname == "codesel":
|
|
_mem.code_sel0 = ascdec(svalue[0])
|
|
_mem.code_sel1 = ascdec(svalue[1])
|
|
_mem.code_sel2 = ascdec(svalue[2])
|
|
_mem.code_sel3 = ascdec(svalue[3])
|
|
_mem.code_sel4 = ascdec(svalue[4])
|
|
_mem.code_sel5 = ascdec(svalue[5])
|
|
_mem.code_sel6 = ascdec(svalue[6])
|
|
_mem.code_sel7 = ascdec(svalue[7])
|
|
_mem.code_sel8 = ascdec(svalue[8])
|
|
_mem.code_sel9 = ascdec(svalue[9])
|
|
|
|
if _mem.freq == 0:
|
|
_mem.set_raw("\xFF" * 32)
|
|
_mem.code_sel0 = 14
|
|
_mem.code_sel1 = 14
|
|
_mem.code_sel2 = 14
|
|
_mem.code_sel3 = 14
|
|
_mem.code_sel4 = 14
|
|
_mem.code_sel5 = 14
|
|
_mem.code_sel6 = 14
|
|
_mem.code_sel7 = 14
|
|
_mem.code_sel8 = 14
|
|
_mem.code_sel9 = 14
|
|
|
|
return mem
|
|
|
|
|
|
################################################################################################################################
|
|
# L E T T U R A S E T T I N G S
|
|
################################################################################################################################
|
|
|
|
#--------------------------------------------------------------------------------
|
|
def get_settings(self):
|
|
_mem = self._memobj
|
|
|
|
basic = RadioSettingGroup("basic", "Basic Settings")
|
|
vfoch = RadioSettingGroup("vfoch", "VFO / Channel Mode")
|
|
agc = RadioSettingGroup("agc", "RF Gain Settings")
|
|
keya = RadioSettingGroup("keya", "Programmable keys")
|
|
dtmf = RadioSettingGroup("dtmf", "DTMF/Selcall Settings")
|
|
dtmfc = RadioSettingGroup("dtmfc", "DTMF Contacts")
|
|
lstn = RadioSettingGroup("lstn", "Memory Group")
|
|
preset = RadioSettingGroup("preset", "Preset List")
|
|
expert = RadioSettingGroup("expert", "Expert Settings")
|
|
roinfo = RadioSettingGroup("roinfo", _("Driver information"))
|
|
|
|
top = RadioSettings( basic, vfoch, agc, keya, dtmf, dtmfc, lstn, preset, expert, roinfo )
|
|
#--------------------------------------------------------------------------------
|
|
# helper function
|
|
def append_label(radio_setting, label, descr=""):
|
|
if not hasattr(append_label, 'idx'):
|
|
append_label.idx = 0
|
|
|
|
val = RadioSettingValueString(len(descr), len(descr), descr)
|
|
val.set_mutable(False)
|
|
rs = RadioSetting("label" + str(append_label.idx), label, val)
|
|
append_label.idx += 1
|
|
radio_setting.append(rs)
|
|
|
|
|
|
|
|
#********************************************************************************** SEZIONE TASTI PROGRAMMABILI
|
|
append_label(keya,"_" * 30 + " Programmable Key " + "_" * 274, "_" * 300)
|
|
# Programmable keys
|
|
tmpval = int(_mem.key1_shortpress_action)
|
|
if tmpval >= len(KEYACTIONS_LIST):
|
|
tmpval = 0
|
|
rs = RadioSetting("key1_shortpress_action", "Side key 1 short press",
|
|
RadioSettingValueList(KEYACTIONS_LIST, KEYACTIONS_LIST[tmpval]))
|
|
keya.append(rs)
|
|
|
|
tmpval = int(_mem.key1_longpress_action)
|
|
if tmpval >= len(KEYACTIONS_LIST):
|
|
tmpval = 0
|
|
rs = RadioSetting("key1_longpress_action", "Side key 1 long press",
|
|
RadioSettingValueList(KEYACTIONS_LIST, KEYACTIONS_LIST[tmpval]))
|
|
keya.append(rs)
|
|
|
|
tmpval = int(_mem.key2_shortpress_action)
|
|
if tmpval >= len(KEYACTIONS_LIST):
|
|
tmpval = 0
|
|
rs = RadioSetting("key2_shortpress_action", "Side key 2 short press",
|
|
RadioSettingValueList(KEYACTIONS_LIST, KEYACTIONS_LIST[tmpval]))
|
|
keya.append(rs)
|
|
|
|
tmpval = int(_mem.key2_longpress_action)
|
|
if tmpval >= len(KEYACTIONS_LIST):
|
|
tmpval = 0
|
|
rs = RadioSetting("key2_longpress_action", "Side key 2 long press",
|
|
RadioSettingValueList(KEYACTIONS_LIST, KEYACTIONS_LIST[tmpval]))
|
|
keya.append(rs)
|
|
|
|
append_label(keya," " * 40 + "| | " )
|
|
append_label(keya," " * 40 + "| | " )
|
|
append_label(keya," " * 40 + "| | " )
|
|
append_label(keya," " * 40 + "| | " )
|
|
append_label(keya," " * 40 + "| |___________ | |" )
|
|
append_label(keya," " * 40 + "| ____________ /" )
|
|
append_label(keya," " * 39 +"|| | | |" )
|
|
append_label(keya," " * 30 +" PTT |" "| | | |" )
|
|
append_label(keya," " * 39 +" | |____________| |" )
|
|
append_label(keya," " * 21 +"Side key 1 |" "| / / / / |" )
|
|
append_label(keya," " * 21 +"Side key 2 |" "| / / / / |" )
|
|
append_label(keya," " * 41 + "| |" )
|
|
append_label(keya," " * 41 + "| |" )
|
|
append_label(keya," " * 41 + "| |" )
|
|
append_label(keya," " * 41 + "|_________________ |" )
|
|
|
|
|
|
|
|
#********************************************************************************** SEZIONE DTMF
|
|
append_label(dtmf, "_" * 30 + " DTMF Setting " + "_" * 274, "_" * 300)
|
|
|
|
# DTMF settings
|
|
|
|
tmpval = str(_mem.dtmf_settings.separate_code)
|
|
if tmpval not in DTMF_CODE_CHARS:
|
|
tmpval = '*'
|
|
val = RadioSettingValueString(1, 1, tmpval)
|
|
val.set_charset(DTMF_CODE_CHARS)
|
|
rs = RadioSetting("dtmf_separate_code", "DTMF Separate Code", val)
|
|
dtmf.append(rs)
|
|
|
|
tmpval = str(_mem.dtmf_settings.group_call_code)
|
|
if tmpval not in DTMF_CODE_CHARS:
|
|
tmpval = '#'
|
|
val = RadioSettingValueString(1, 1, tmpval)
|
|
val.set_charset(DTMF_CODE_CHARS)
|
|
rs = RadioSetting("group_call_code", "DTMF Group Call Code", val)
|
|
dtmf.append(rs)
|
|
|
|
tmpval = _mem.dtmf_settings.decode_response
|
|
if tmpval >= len(DTMF_DECODE_RESPONSE_LIST):
|
|
tmpval = 0
|
|
rs = RadioSetting("dtmf_decode_response", "DTMF Decode Response",RadioSettingValueList(DTMF_DECODE_RESPONSE_LIST,DTMF_DECODE_RESPONSE_LIST[tmpval]))
|
|
dtmf.append(rs)
|
|
|
|
tmpval = _mem.dtmf_settings.auto_reset_time
|
|
if tmpval > 60 or tmpval < 5:
|
|
tmpval = 5
|
|
rs = RadioSetting("dtmf_auto_reset_time","DTMF Auto reset time (s)",RadioSettingValueInteger(5, 60, tmpval))
|
|
dtmf.append(rs)
|
|
|
|
tmpval = int(_mem.dtmf_settings.preload_time)
|
|
if tmpval > 100 or tmpval < 3: # se leggero' un valore maggiore di 100(x10) o meno di 3(x10)
|
|
tmpval = 30 # il valore verrà impostato a 30
|
|
tmpval *= 10 # moltiplico per 10
|
|
rs = RadioSetting("dtmf_preload_time","DTMF Pre-load time (ms)",RadioSettingValueInteger(30, 1000, tmpval, 10)) # 30 minimo 1000 massimo ,con step di 10
|
|
dtmf.append(rs)
|
|
|
|
tmpval = int(_mem.dtmf_settings.first_code_persist_time)
|
|
if tmpval > 100 or tmpval < 3:
|
|
tmpval = 30
|
|
tmpval *= 10
|
|
rs = RadioSetting("dtmf_first_code_persist_time","DTMF First code persist time (ms)",RadioSettingValueInteger(30, 1000, tmpval, 10))
|
|
dtmf.append(rs)
|
|
|
|
tmpval = int(_mem.dtmf_settings.hash_persist_time)
|
|
if tmpval > 100 or tmpval < 3:
|
|
tmpval = 30
|
|
tmpval *= 10
|
|
rs = RadioSetting("dtmf_hash_persist_time","DTMF #/* persist time (ms)",RadioSettingValueInteger(30, 1000, tmpval, 10))
|
|
dtmf.append(rs)
|
|
|
|
tmpval = int(_mem.dtmf_settings.code_persist_time)
|
|
if tmpval > 100 or tmpval < 3:
|
|
tmpval = 30
|
|
tmpval *= 10
|
|
rs = RadioSetting("dtmf_code_persist_time","DTMF Code persist time (ms)",RadioSettingValueInteger(30, 1000, tmpval, 10))
|
|
dtmf.append(rs)
|
|
|
|
tmpval = int(_mem.dtmf_settings.code_interval_time)
|
|
if tmpval > 100 or tmpval < 3:
|
|
tmpval = 30
|
|
tmpval *= 10
|
|
rs = RadioSetting("dtmf_code_interval_time","DTMF Code interval time (ms)",RadioSettingValueInteger(30, 1000, tmpval, 10))
|
|
dtmf.append(rs)
|
|
|
|
append_label(dtmf, "_" * 10 + " DTMF/SELCALL Setting (1-8 chars 0-9 ABCDEF)" + "_" * 274, "_" * 300)
|
|
tmpval = str(_mem.dtmf_settings_numbers.dtmf_local_code).upper().strip("\x00\xff\x20")
|
|
|
|
for i in tmpval:
|
|
if i in DTMF_CHARS_ID:
|
|
continue
|
|
else:
|
|
tmpval = "103"
|
|
break
|
|
val = RadioSettingValueString(1, 8, tmpval)
|
|
val.set_charset(DTMF_CHARS_ID)
|
|
rs = RadioSetting("dtmf_dtmf_local_code","DTMF Own ID / SELCALL OWN ID for REGA ", val)
|
|
dtmf.append(rs)
|
|
|
|
tmpval = str(_mem.dtmf_settings_numbers.dtmf_up_code).upper().strip("\x00\xff\x20")
|
|
|
|
for i in tmpval:
|
|
if i in DTMF_CHARS_UPDOWN or i == "":
|
|
continue
|
|
else:
|
|
tmpval = "123"
|
|
break
|
|
val = RadioSettingValueString(1, 8, tmpval)
|
|
val.set_charset(DTMF_CHARS_UPDOWN)
|
|
rs = RadioSetting("dtmf_dtmf_up_code","DTMF/SELCALL Up code ***(valid only in VFO)", val)
|
|
dtmf.append(rs)
|
|
|
|
tmpval = str(_mem.dtmf_settings_numbers.dtmf_down_code).upper().strip("\x00\xff\x20")
|
|
|
|
for i in tmpval:
|
|
if i in DTMF_CHARS_UPDOWN:
|
|
continue
|
|
else:
|
|
tmpval = "456"
|
|
break
|
|
val = RadioSettingValueString(1, 8, tmpval)
|
|
val.set_charset(DTMF_CHARS_UPDOWN)
|
|
rs = RadioSetting("dtmf_dtmf_down_code","DTMF/SELCALL Down code ***(valid only in VFO)", val)
|
|
dtmf.append(rs)
|
|
|
|
tmppr = bool(_mem.dtmf_settings.side_tone > 0)
|
|
rs = RadioSetting("dtmf_side_tone","DTMF/SELCALL Sidetone",RadioSettingValueBoolean(tmppr))
|
|
dtmf.append(rs)
|
|
|
|
# DTMF/SELCALL LIVE
|
|
rs = RadioSetting("dtmf_live","DTMF/SELCALL Live", RadioSettingValueBoolean(bool(_mem.dtmf_live > 0)))
|
|
dtmf.append(rs)
|
|
|
|
# append_label(dtmfc,
|
|
# "_" * 30 + " DTMF Contact List " + "_" * 274, "_" * 300)
|
|
|
|
val = RadioSettingValueString(0, 80,
|
|
"All DTMF Contacts are 8 codes "
|
|
"(valid: 0-9 * # ABCD), "
|
|
"or an empty string")
|
|
val.set_mutable(False)
|
|
rs = RadioSetting("dtmf_descr1", "DTMF Contacts", val)
|
|
dtmfc.append(rs)
|
|
|
|
#********************************************************************************** SEZIONE CONTATTI DTMF
|
|
|
|
for i in range(1, 17):
|
|
append_label(dtmfc, "_" * 30 + " DTMF Contact #" + str(i))
|
|
varname = "DTMF_"+str(i)
|
|
varnumname = "DTMFNUM_"+str(i)
|
|
vardescr = "DTMF Contact "+str(i)+" name"
|
|
varinumdescr = "DTMF Contact "+str(i)+" number"
|
|
|
|
cntn = str(_mem.dtmfcontact[i-1].name).strip("\x20\x00\xff")
|
|
cntnum = str(_mem.dtmfcontact[i-1].number).strip("\x20\x00\xff")
|
|
|
|
val = RadioSettingValueString(0, 8, cntn)
|
|
rs = RadioSetting(varname, vardescr, val)
|
|
dtmfc.append(rs)
|
|
|
|
val = RadioSettingValueString(0, 8, cntnum)
|
|
val.set_charset(DTMF_CHARS)
|
|
rs = RadioSetting(varnumname, varinumdescr, val)
|
|
dtmfc.append(rs)
|
|
|
|
#********************************************************************************** SEZIONE GRUPPI O LISTE
|
|
|
|
# LIST NAME
|
|
append_label(lstn, "_" * 30 + " Memory Group LIST NAME " + "_" * 274, "_" * 300)
|
|
# # S-LIST
|
|
# tmpmax = _mem.ch_list
|
|
# if tmpmax >= len(GROUP_LIST):
|
|
# tmpmax = GROUP_LIST.index("none")
|
|
# rs = RadioSetting("ch_list","Memory Group in use",RadioSettingValueList(GROUP_LIST,GROUP_LIST[tmpmax]))
|
|
# lstn.append(rs)
|
|
|
|
val = RadioSettingValueString(0, 80,"List Name")
|
|
val.set_mutable(False)
|
|
rs = RadioSetting("list_descr1", "Memory Group ", val)
|
|
lstn.append(rs)
|
|
|
|
for i in range(0, 16):
|
|
varlist = "List Name_"+str(i)
|
|
vardescrl = "Memory Group "+str(i)+" "
|
|
|
|
cntnl = str(_mem.list_name[i].name).strip("\x20\x00\xff")
|
|
|
|
val = RadioSettingValueString(0, 8, cntnl)
|
|
rs = RadioSetting(varlist, vardescrl, val)
|
|
lstn.append(rs)
|
|
|
|
|
|
#********************************************************************************** SEZIONE AGC
|
|
# AGC
|
|
append_label(agc, "_" * 30 + " RF Gain Band Setting " + "_" * 274, "_" * 300)
|
|
|
|
val = RadioSettingValueString(0, 80,"RF Gain Value (dBM) (** READ ONLY **)")
|
|
val.set_mutable(False)
|
|
rs = RadioSetting("agc_descr", "RF Gain VFO #", val)
|
|
agc.append(rs)
|
|
|
|
for i in range(1, 8):
|
|
nagc = "agc_"+str(i)
|
|
dagc = "RF Gain VFO "+str(i)+" "
|
|
vagc = _mem.agc[i-1].val
|
|
vagcd = AGC_CORR[i-1] + int(AGC_LIST[vagc])
|
|
|
|
|
|
temp = RadioSettingValueString(len(str(vagcd)), len(str(vagcd)), str(vagcd))
|
|
temp.set_mutable(False)
|
|
|
|
rs = RadioSetting(nagc,dagc,temp)
|
|
agc.append(rs)
|
|
|
|
|
|
#********************************************************************************** SEZIONE PRESET
|
|
# PRESET
|
|
|
|
for i in range(1, 13):
|
|
append_label(preset, "_" * 30 + " PRESET " + str(i) + "_" * 274, "_" * 300)
|
|
|
|
#----------------------------------------------- name
|
|
varlist = "Preset_Name_"+str(i)
|
|
vardescrl = "Preset Name "+str(i)
|
|
|
|
cntnl = str(_mem.preset[i-1].name).strip("\x20\x00\xff")
|
|
val = RadioSettingValueString(0, 8, cntnl)
|
|
rs = RadioSetting(varlist, vardescrl, val)
|
|
preset.append(rs)
|
|
#----------------------------------------------- freq low
|
|
freqlow = "Low_Range_"+str(i)
|
|
lowdesc = "Low Range "
|
|
# flow = _mem.preset[i-1].freq_low
|
|
|
|
# rs = RadioSetting(freqlow,lowdesc,RadioSettingValueInteger(0, 130000000, flow, 1))
|
|
|
|
flow = _mem.preset[i-1].freq_low/100000.0
|
|
if flow > 1300.00000:
|
|
rs = RadioSetting(freqlow, lowdesc,
|
|
RadioSettingValueString(0, 10, "1300.00000"))
|
|
else:
|
|
rs = RadioSetting(freqlow, lowdesc,
|
|
RadioSettingValueString(0, 10, str(flow)))
|
|
|
|
preset.append(rs)
|
|
#----------------------------------------------- freq up
|
|
frequp = "Up_Range_"+str(i)
|
|
updesc = "Up Range "
|
|
# fup = _mem.preset[i-1].freq_up
|
|
|
|
# rs = RadioSetting(frequp,updesc,RadioSettingValueInteger(0, 130000000, fup, 1))
|
|
fup = _mem.preset[i-1].freq_up/100000.0
|
|
if fup > 1300.00000:
|
|
rs = RadioSetting(frequp, updesc,
|
|
RadioSettingValueString(0, 10, "1300.00000"))
|
|
else:
|
|
rs = RadioSetting(frequp, updesc,
|
|
RadioSettingValueString(0, 10, str(fup)))
|
|
|
|
preset.append(rs)
|
|
|
|
#----------------------------------------------- step
|
|
step = "Step_"+str(i)
|
|
stepdesc = "Step "
|
|
vstep = _mem.preset[i-1].step
|
|
if vstep >= len(STEP_LIST):
|
|
vstep = 10
|
|
|
|
rs = RadioSetting(step,stepdesc,RadioSettingValueList(STEP_LIST,STEP_LIST[vstep]))
|
|
preset.append(rs)
|
|
|
|
#-----------------------------------------------Tx Power
|
|
txpower = "TX Power_"+str(i)
|
|
txpowerdesc = "TX Power "
|
|
vtxpower = _mem.preset[i-1].txpower
|
|
if vtxpower >= len(TXPOWER_LIST):
|
|
vtxpower = 0
|
|
|
|
rs = RadioSetting(txpower,txpowerdesc,RadioSettingValueList(TXPOWER_LIST,TXPOWER_LIST[vtxpower]))
|
|
preset.append(rs)
|
|
|
|
#----------------------------------------------- bw
|
|
sbw = "Bw_"+str(i)
|
|
dbw = "BW "
|
|
vbw = _mem.preset[i-1].bw
|
|
if vbw >= len(BANDWIDTH_LIST):
|
|
vbw = 0
|
|
|
|
rs = RadioSetting(sbw,dbw,RadioSettingValueList(BANDWIDTH_LIST,BANDWIDTH_LIST[vbw]))
|
|
preset.append(rs)
|
|
|
|
#----------------------------------------------- Modulation
|
|
smod = "Mode_"+str(i)
|
|
dmod = "Mode "
|
|
vmod = _mem.preset[i-1].modulation
|
|
if vmod >= len(MODULATION_LIST):
|
|
vmod = 0
|
|
|
|
rs = RadioSetting(smod,dmod,RadioSettingValueList(MODULATION_LIST,MODULATION_LIST[vmod]))
|
|
preset.append(rs)
|
|
|
|
#----------------------------------------------- Squelch
|
|
ssq = "Sql_"+str(i)
|
|
dsq = "Squelch "
|
|
if _mem.preset[i-1].squelch < len(SQUELCH_LIST):
|
|
vsql = _mem.preset[i-1].squelch
|
|
else:
|
|
vsql = 1
|
|
|
|
rs = RadioSetting(ssq,dsq,RadioSettingValueList(SQUELCH_LIST,SQUELCH_LIST[vsql]))
|
|
preset.append(rs)
|
|
|
|
#********************************************************************************** SEZIONE SETTAGGI DI BASE
|
|
append_label(basic, "_" * 30 + " Display settings " + "_" * 274, "_" * 300)
|
|
|
|
|
|
|
|
|
|
# Backlight auto mode
|
|
tmpback = _mem.backlight_auto_mode
|
|
if tmpback >= len(BACKLIGHT_LIST):
|
|
tmpback = 0
|
|
rs = RadioSetting("backlight_auto_mode","BackLightTime",RadioSettingValueList(BACKLIGHT_LIST,BACKLIGHT_LIST[tmpback]))
|
|
basic.append(rs)
|
|
|
|
# BLMode
|
|
rs = RadioSetting("bl_mode","BLmode (TX/RX)", RadioSettingValueBoolean(bool(_mem.bl_mode > 0)))
|
|
basic.append(rs)
|
|
|
|
# Inversione display
|
|
rs = RadioSetting("back_type","Display Inverted",RadioSettingValueBoolean(bool(_mem.back_type > 0)))
|
|
basic.append(rs)
|
|
|
|
# RSSI / S Meter BIT 2
|
|
rs = RadioSetting("signal_meter","SMeter (instead of RSSI for dual VFO)", RadioSettingValueBoolean(bool(_mem.signal_meter > 0)))
|
|
basic.append(rs)
|
|
|
|
# MicBar
|
|
rs = RadioSetting("micbar","MicBar", RadioSettingValueBoolean(bool(_mem.micbar > 0)))
|
|
basic.append(rs)
|
|
|
|
# Power on display mode
|
|
tmpdispmode = _mem.power_on_dispmode
|
|
if tmpdispmode >= len(WELCOME_LIST):
|
|
tmpdispmode = 0
|
|
rs = RadioSetting("welcome_mode","Power on display MSG",RadioSettingValueList(WELCOME_LIST,WELCOME_LIST[tmpdispmode]))
|
|
basic.append(rs)
|
|
|
|
append_label(basic, "_" * 30 + " Audio settings " + "_" * 274, "_" * 300)
|
|
# Beep control
|
|
rs = RadioSetting("beep_control","Beep control",RadioSettingValueBoolean(bool(_mem.beep_control > 0)))
|
|
basic.append(rs)
|
|
|
|
# Mic gain
|
|
tmpmicgain = _mem.mic_gain
|
|
if tmpmicgain >= len(MICGAIN_LIST):
|
|
tmpmicgain = MICGAIN_LIST.index("+12.0dB")
|
|
rs = RadioSetting("mic_gain","Mic Gain",RadioSettingValueList(MICGAIN_LIST,MICGAIN_LIST[tmpmicgain]))
|
|
basic.append(rs)
|
|
|
|
# VOX switch
|
|
rs = RadioSetting("vox_switch","VOX enabled", RadioSettingValueBoolean(bool(_mem.vox_switch > 0)))
|
|
basic.append(rs)
|
|
|
|
# VOX Level
|
|
tmpvox = _mem.vox_level+1
|
|
if tmpvox > 10:
|
|
tmpvox = 10
|
|
rs = RadioSetting("vox_level", "VOX Level",RadioSettingValueInteger(1, 10, tmpvox))
|
|
basic.append(rs)
|
|
|
|
|
|
append_label(basic, "_" * 30 + " Key Lock settings " + "_" * 274, "_" * 300)
|
|
|
|
# Keypad locked
|
|
rs = RadioSetting("key_lock","Keypad Lock",RadioSettingValueBoolean(bool(_mem.key_lock > 0)))
|
|
basic.append(rs)
|
|
|
|
# Auto keypad lock
|
|
rs = RadioSetting("auto_keypad_lock","Auto keypad lock",RadioSettingValueBoolean(bool(_mem.auto_keypad_lock > 0)))
|
|
basic.append(rs)
|
|
|
|
append_label(basic, "_" * 30 + " RTX settings " + "_" * 274, "_" * 300)
|
|
|
|
# Crossband receiving/transmitting
|
|
tmpcross = _mem.crossband
|
|
if tmpcross >= len(CROSSBAND_LIST):
|
|
tmpcross = 0
|
|
rs = RadioSetting("crossband","VFO mode ",RadioSettingValueList(CROSSBAND_LIST,CROSSBAND_LIST[tmpcross]))
|
|
basic.append(rs)
|
|
|
|
# Dual watch
|
|
# tmpdual = _mem.dual_watch
|
|
# if tmpdual >= len(DUALWATCH_LIST):
|
|
# tmpdual = 0
|
|
# rs = RadioSetting("dualwatch", "Dual Watch (DualRX)", RadioSettingValueList(DUALWATCH_LIST, DUALWATCH_LIST[tmpdual]))
|
|
# basic.append(rs)
|
|
|
|
# Band TX
|
|
tmpbandstx = _mem.bands_tx
|
|
if tmpbandstx >= len(BANDS_TX_LIST):
|
|
tmpbandstx = 0
|
|
rs = RadioSetting("bands_tx", "Bands TX", RadioSettingValueList(BANDS_TX_LIST, BANDS_TX_LIST[tmpbandstx]))
|
|
basic.append(rs)
|
|
|
|
append_label(basic, "_" * 30 + " Beacon/CQ Call settings " + "_" * 274, "_" * 300)
|
|
|
|
# Beacon
|
|
tmpbeacon = _mem.beacon
|
|
if tmpbeacon >= len(BEACON_LIST):
|
|
tmpbeacon = BEACON_LIST.index("OFF")
|
|
rs = RadioSetting("beacon","Beacon/CQ Call",RadioSettingValueList(BEACON_LIST,BEACON_LIST[tmpbeacon]))
|
|
basic.append(rs)
|
|
|
|
# QRZ label
|
|
qrz_label = str(_mem.qrz_label).rstrip("\x20\x00\xff") + "\x00"
|
|
qrz_label = _getstring(qrz_label.encode('ascii', errors='ignore'), 0, 8)
|
|
rs = RadioSetting("qrz_label", _("QRA (8 characters)"), RadioSettingValueString(0, 8, qrz_label))
|
|
basic.append(rs)
|
|
|
|
# Logo string 1
|
|
logo1 = str(_mem.logo_line1).strip("\x20\x00\xff") + "\x00"
|
|
logo1 = _getstring(logo1.encode('ascii', errors='ignore'), 0, 16)
|
|
rs = RadioSetting("logo1", _("Logo string 1 (16 characters)"), RadioSettingValueString(0, 16, logo1))
|
|
basic.append(rs)
|
|
|
|
# Logo string 2
|
|
logo2 = str(_mem.logo_line2).strip("\x20\x00\xff") + "\x00"
|
|
logo2 = _getstring(logo2.encode('ascii', errors='ignore'), 0, 16)
|
|
rs = RadioSetting("logo2", _("Logo string 2 (16 characters)"), RadioSettingValueString(0, 16, logo2))
|
|
basic.append(rs)
|
|
|
|
append_label(basic, "_" * 30 + " Other settings " + "_" * 274, "_" * 300)
|
|
|
|
# TOT
|
|
tmptot = _mem.max_talk_time
|
|
if tmptot >= len(TALKTIME_LIST):
|
|
tmptot = TALKTIME_LIST.index("3min")
|
|
rs = RadioSetting("max_talk_time","Max talk time (Tx TOT)",RadioSettingValueList(TALKTIME_LIST,TALKTIME_LIST[tmptot]))
|
|
basic.append(rs)
|
|
|
|
# Battery save
|
|
tmpbatsave = _mem.battery_save
|
|
if tmpbatsave >= len(BATSAVE_LIST):
|
|
tmpbatsave = BATSAVE_LIST.index("80%")
|
|
rs = RadioSetting("battery_save","Battery Save",RadioSettingValueList(BATSAVE_LIST,BATSAVE_LIST[tmpbatsave]))
|
|
basic.append(rs)
|
|
|
|
|
|
|
|
|
|
# Scan resume mode
|
|
tmpscanres = _mem.scan_resume_mode
|
|
if tmpscanres >= len(SCANRESUME_LIST):
|
|
tmpscanres = 0
|
|
rs = RadioSetting("scan_resume_mode","Scan resume mode (Sc REV)",RadioSettingValueList(SCANRESUME_LIST,SCANRESUME_LIST[tmpscanres]))
|
|
basic.append(rs)
|
|
|
|
#________________________________________________________________________________
|
|
append_label(vfoch, "_" * 300 + "_" * 274, "_" * 300)
|
|
# Channel display mode
|
|
tmpchdispmode = _mem.channel_display_mode
|
|
if tmpchdispmode >= len(CHANNELDISP_LIST):
|
|
tmpchdispmode = 0
|
|
rs = RadioSetting("channel_display_mode","Channel Display mode",RadioSettingValueList( CHANNELDISP_LIST, CHANNELDISP_LIST[tmpchdispmode]))
|
|
vfoch.append(rs)
|
|
|
|
# Single VFO
|
|
# val = _mem.single_vfo
|
|
# rs = RadioSetting("single_vfo","Dual/Single Band", #RadioSettingValueBoolean(bool(_mem.single_vfo > 0)))
|
|
# RadioSettingValueList(DUALMODE_LIST, DUALMODE_LIST[val]))
|
|
# vfoch.append(rs)
|
|
|
|
|
|
|
|
# call channel
|
|
tmpc = _mem.call_channel+1
|
|
if tmpc > CHAN_MAX:
|
|
tmpc = 1
|
|
rs = RadioSetting("call_channel", "Call channel",RadioSettingValueInteger(1, CHAN_MAX, tmpc))
|
|
vfoch.append(rs)
|
|
|
|
|
|
#************************** EXPERT SETTING ********************************************************
|
|
|
|
append_label(expert, "_" * 30 + " Expert settings " + "_" * 274, "_" * 300)
|
|
|
|
# Tail tone elimination
|
|
rs = RadioSetting("tail_note_elimination","TX Squelch Tail Elimination",RadioSettingValueBoolean(bool(_mem.tail_note_elimination > 0)))
|
|
expert.append(rs)
|
|
|
|
# Repeater tail tone elimination
|
|
tmprte = _mem.repeater_tail_elimination
|
|
if tmprte >= len(RTE_LIST):
|
|
tmprte = 0
|
|
rs = RadioSetting("repeater_tail_elimination","RX Squelch Tail Elimination",RadioSettingValueList(RTE_LIST, RTE_LIST[tmprte]))
|
|
expert.append(rs)
|
|
|
|
# TX Enable
|
|
rs = RadioSetting("tx_enable","TX enable", RadioSettingValueBoolean(bool(_mem.tx_enable > 0)))
|
|
expert.append(rs)
|
|
|
|
# VFO open
|
|
rs = RadioSetting("vfo_lock", "VFO hidden", RadioSettingValueBoolean(bool(_mem.vfo_lock > 0)))
|
|
expert.append(rs)
|
|
|
|
# Custom tone
|
|
custom_tone = _mem.custom_tone/10.0
|
|
if custom_tone > CTMAX:
|
|
rs = RadioSetting("custom_tone", "CTCSS Custom Tone (0 ~ 255 Hz)",
|
|
RadioSettingValueString(0, 5, "255.0"))
|
|
else:
|
|
rs = RadioSetting("custom_tone", "CTCSS Custom Tone (0 ~ 255 Hz)",
|
|
RadioSettingValueString(0, 5, str(custom_tone)))
|
|
expert.append(rs)
|
|
|
|
append_label(expert, " " * 300 , " " * 300)
|
|
|
|
# SATCOM
|
|
append_label(expert, "_" * 30 + " SATCOM " + "_" * 274, "_" * 300)
|
|
# Satcom enable
|
|
rs = RadioSetting("satcom","Boost", RadioSettingValueBoolean(bool(_mem.satcom > 0)))
|
|
expert.append(rs)
|
|
|
|
# Sat Frequency Switch
|
|
sat_freq = _mem.sat_freq/100000.0
|
|
if sat_freq > 290.00000 or sat_freq < 210.00000 :
|
|
rs = RadioSetting("sat_freq", "Sat Switch Frequency (range 210 ~ 290.00000 MHz)",RadioSettingValueString(0, 9, "280.00000"))
|
|
else:
|
|
rs = RadioSetting("sat_freq", "Sat Switch Frequency (range 210 ~ 290.00000 MHz)",RadioSettingValueString(0, 9, str(sat_freq)))
|
|
expert.append(rs)
|
|
|
|
|
|
# UPCONVERTER
|
|
append_label(expert, " " * 300 , " " * 300)
|
|
append_label(expert, "_" * 30 + " UP CONVERTER " + "_" * 274, "_" * 300)
|
|
|
|
# Upconv
|
|
tmpupconv = _mem.upconv
|
|
if tmpupconv >= len(UPCONV_LIST):
|
|
tmpupconv = UPCONV_LIST.index("OFF")
|
|
rs = RadioSetting("upconv","UP Converter", RadioSettingValueList(UPCONV_LIST,UPCONV_LIST[tmpupconv]))
|
|
expert.append(rs)
|
|
|
|
#Custom Frequency Upconverter
|
|
custom_upconv = _mem.custom_upconv/100000.0
|
|
if custom_upconv > 999.99999:
|
|
rs = RadioSetting("custom_upconv", "Custom Upconvrerter Frequency (max 999.99999 MHz)",RadioSettingValueString(0, 9, "999.99999"))
|
|
else:
|
|
rs = RadioSetting("custom_upconv", "Custom Upconvrerter Frequency (max 999.99999 MHz)",RadioSettingValueString(0, 9, str(custom_upconv)))
|
|
expert.append(rs)
|
|
|
|
|
|
# BATTERY Calibration
|
|
append_label(expert, " " * 300 , " " * 300)
|
|
append_label(expert, "_" * 30 + " BATTERY CALIBRATION " + "_" * 274, "_" * 300)
|
|
batt_cal0 = _mem.batt_cal0/100.0
|
|
rs = RadioSetting("batt_cal0", "Voltage Calibration (Volt)",
|
|
RadioSettingValueString(0, 3, str(batt_cal0)))
|
|
expert.append(rs)
|
|
append_label(expert, " " * 300 , " " * 300)
|
|
append_label(expert, "_" * 30 + " Icon bar Trheshold CALIBRATION " + "_" * 274, "_" * 300)
|
|
batt_cal1 = _mem.batt_cal1/10.0
|
|
rs = RadioSetting("batt_cal1", "Trheshold Full (Volt)",
|
|
RadioSettingValueString(0, 3, str(batt_cal1)))
|
|
expert.append(rs)
|
|
batt_cal2 = _mem.batt_cal2/10.0
|
|
rs = RadioSetting("batt_cal2", "Trheshold 4° bar (Volt)",
|
|
RadioSettingValueString(0, 3, str(batt_cal2)))
|
|
expert.append(rs)
|
|
batt_cal3 = _mem.batt_cal3/10.0
|
|
rs = RadioSetting("batt_cal3", "Trheshold 3° bar (Volt)",
|
|
RadioSettingValueString(0, 3, str(batt_cal3)))
|
|
expert.append(rs)
|
|
batt_cal4 = _mem.batt_cal4/10.0
|
|
rs = RadioSetting("batt_cal4", "Trheshold 2° bar (Volt)",
|
|
RadioSettingValueString(0, 3, str(batt_cal4)))
|
|
expert.append(rs)
|
|
batt_cal5 = _mem.batt_cal5/10.0
|
|
rs = RadioSetting("batt_cal5", "Trheshold 1° bar (Volt)",
|
|
RadioSettingValueString(0, 3, str(batt_cal5)))
|
|
expert.append(rs)
|
|
batt_cal6 = _mem.batt_cal6/10.0
|
|
rs = RadioSetting("batt_cal6", "Trheshold Empty (Volt)",
|
|
RadioSettingValueString(0, 3, str(batt_cal6)))
|
|
expert.append(rs)
|
|
|
|
|
|
|
|
|
|
|
|
#********************************************************************************** SEZIONE INFO
|
|
# readonly info
|
|
# Firmware
|
|
if self.FIRMWARE_VERSION == "":
|
|
firmware = "To get the firmware version please download"
|
|
"the image from the radio first"
|
|
else:
|
|
firmware = self.FIRMWARE_VERSION
|
|
|
|
val = RadioSettingValueString(0, 128, firmware)
|
|
val.set_mutable(False)
|
|
rs = RadioSetting("fw_ver", "Firmware Version", val)
|
|
roinfo.append(rs)
|
|
|
|
# No limits version for hacked firmware
|
|
val = RadioSettingValueBoolean(self._expanded_limits)
|
|
rs = RadioSetting("nolimits", "Limits disabled for modified firmware",val)
|
|
rs.set_warning(_(
|
|
'This should only be enabled if you are using modified firmware '
|
|
'that supports wider frequency coverage. Enabling this will cause '
|
|
'CHIRP not to enforce OEM restrictions and may lead to undefined '
|
|
'or unregulated behavior. Use at your own risk!'),
|
|
safe_value=False)
|
|
roinfo.append(rs)
|
|
|
|
return top
|
|
|
|
|
|
|
|
################################################################################################################################
|
|
# S A L V A T A G G I O S E T T I N G S
|
|
################################################################################################################################
|
|
|
|
#--------------------------------------------------------------------------------
|
|
def set_settings(self, settings):
|
|
|
|
_mem = self._memobj
|
|
|
|
for element in settings:
|
|
if not isinstance(element, RadioSetting):
|
|
self.set_settings(element)
|
|
continue
|
|
|
|
# basic settings
|
|
|
|
# Single VFO
|
|
# if element.get_name() == "single_vfo":
|
|
# _mem.single_vfo = DUALMODE_LIST.index(str(element.value))
|
|
# #_mem.single_vfo = element.value and 1 or 0
|
|
|
|
# BLMode
|
|
if element.get_name() == "bl_mode":
|
|
_mem.bl_mode = element.value and 1 or 0
|
|
|
|
# Inversione display
|
|
if element.get_name() == "back_type":
|
|
_mem.back_type = element.value and 1 or 0
|
|
|
|
# RSSI / S Meter
|
|
if element.get_name() == "signal_meter":
|
|
_mem.signal_meter = element.value and 1 or 0
|
|
|
|
# Beep control
|
|
if element.get_name() == "beep_control":
|
|
_mem.beep_control = element.value and 1 or 0
|
|
|
|
# VOX switch
|
|
if element.get_name() == "vox_switch":
|
|
_mem.vox_switch = element.value and 1 or 0
|
|
|
|
# MicBar
|
|
if element.get_name() == "micbar":
|
|
_mem.micbar = element.value and 1 or 0
|
|
|
|
# Tail tone elimination
|
|
if element.get_name() == "tail_note_elimination":
|
|
_mem.tail_note_elimination = element.value and 1 or 0
|
|
|
|
# Key lock
|
|
if element.get_name() == "key_lock":
|
|
_mem.key_lock = element.value and 1 or 0
|
|
|
|
# Auto keypad lock
|
|
if element.get_name() == "auto_keypad_lock":
|
|
_mem.auto_keypad_lock = element.value and 1 or 0
|
|
|
|
# TX Enable
|
|
if element.get_name() == "tx_enable":
|
|
_mem.tx_enable = element.value and 1 or 0
|
|
|
|
# VFO open
|
|
if element.get_name() == "vfo_lock":
|
|
_mem.vfo_lock = element.value and 1 or 0
|
|
|
|
# Satcom
|
|
if element.get_name() == "satcom":
|
|
_mem.satcom = element.value and 1 or 0
|
|
|
|
#---------------------------------------------------
|
|
|
|
# call channel
|
|
if element.get_name() == "call_channel":
|
|
_mem.call_channel = int(element.value)-1
|
|
|
|
# TOT
|
|
if element.get_name() == "max_talk_time":
|
|
_mem.max_talk_time = TALKTIME_LIST.index(str(element.value))
|
|
|
|
# Beacon
|
|
if element.get_name() == "beacon":
|
|
_mem.beacon = BEACON_LIST.index(str(element.value))
|
|
|
|
# vox level
|
|
if element.get_name() == "vox_level":
|
|
_mem.vox_level = int(element.value)-1
|
|
|
|
# mic gain
|
|
if element.get_name() == "mic_gain":
|
|
_mem.mic_gain = MICGAIN_LIST.index(str(element.value))
|
|
|
|
# Channel display mode
|
|
if element.get_name() == "channel_display_mode":
|
|
_mem.channel_display_mode = CHANNELDISP_LIST.index(str(element.value))
|
|
|
|
# Backlight auto mode
|
|
if element.get_name() == "backlight_auto_mode":
|
|
_mem.backlight_auto_mode = BACKLIGHT_LIST.index(str(element.value))
|
|
|
|
# Power on display mode
|
|
if element.get_name() == "welcome_mode":
|
|
_mem.power_on_dispmode = WELCOME_LIST.index(str(element.value))
|
|
|
|
# Repeater tail tone elimination
|
|
if element.get_name() == "repeater_tail_elimination":
|
|
_mem.repeater_tail_elimination = RTE_LIST.index(str(element.value))
|
|
|
|
# Crossband receiving/transmitting
|
|
if element.get_name() == "crossband":
|
|
_mem.crossband = CROSSBAND_LIST.index(str(element.value))
|
|
|
|
# Dual watch
|
|
# if element.get_name() == "dualwatch":
|
|
# _mem.dual_watch = DUALWATCH_LIST.index(str(element.value))
|
|
|
|
# Band TX
|
|
if element.get_name() == "bands_tx":
|
|
_mem.bands_tx = BANDS_TX_LIST.index(str(element.value))
|
|
|
|
# Battery save
|
|
if element.get_name() == "battery_save":
|
|
_mem.battery_save = BATSAVE_LIST.index(str(element.value))
|
|
|
|
# Scan resume mode
|
|
if element.get_name() == "scan_resume_mode":
|
|
_mem.scan_resume_mode = SCANRESUME_LIST.index(str(element.value))
|
|
|
|
# QRZ label
|
|
if element.get_name() == "qrz_label":
|
|
_mem.qrz_label = element.value
|
|
|
|
# Logo string 1
|
|
if element.get_name() == "logo1":
|
|
_mem.logo_line1 = element.value
|
|
|
|
# Logo string 2
|
|
if element.get_name() == "logo2":
|
|
_mem.logo_line2 = element.value
|
|
|
|
# Upconv
|
|
if element.get_name() == "upconv":
|
|
_mem.upconv = UPCONV_LIST.index(str(element.value))
|
|
|
|
#Custom Frequency Upconverter
|
|
if element.get_name() == "custom_upconv":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 999.99999*100000.0:
|
|
val2 = 0x00000000
|
|
|
|
_mem.custom_upconv = val2
|
|
|
|
#Custom tone
|
|
if element.get_name() == "custom_tone":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*10)
|
|
except Exception:
|
|
val2 = 0x09F6
|
|
|
|
if val2 > CTMAX*10:
|
|
val2 = 0x09F6
|
|
|
|
_mem.custom_tone = val2
|
|
|
|
# Sat Frequency Switch
|
|
if element.get_name() == "sat_freq":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x1AB3F00
|
|
|
|
if val2 > 290.00000*100000.0 or val2 < 210.00000*100000.0:
|
|
val2 = 0x1AB3F00
|
|
|
|
_mem.sat_freq = val2
|
|
|
|
# Battery Calibration
|
|
if element.get_name() == "batt_cal0":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100)
|
|
except Exception:
|
|
val2 = 0xc8
|
|
|
|
if val2 > 2*100:
|
|
val2 = 0xc8
|
|
|
|
_mem.batt_cal0 = val2
|
|
|
|
if element.get_name() == "batt_cal1":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*10)
|
|
except Exception:
|
|
val2 = 0x50
|
|
|
|
if val2 > 9*10:
|
|
val2 = 0x50
|
|
|
|
_mem.batt_cal1 = val2
|
|
|
|
if element.get_name() == "batt_cal2":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*10)
|
|
except Exception:
|
|
val2 = 0x4e
|
|
|
|
if val2 > 9*10:
|
|
val2 = 0x4e
|
|
|
|
_mem.batt_cal2 = val2
|
|
|
|
if element.get_name() == "batt_cal3":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*10)
|
|
except Exception:
|
|
val2 = 0x4b
|
|
|
|
if val2 > 9*10:
|
|
val2 = 0x4b
|
|
|
|
_mem.batt_cal3 = val2
|
|
|
|
if element.get_name() == "batt_cal4":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*10)
|
|
except Exception:
|
|
val2 = 0x48
|
|
|
|
if val2 > 9*10:
|
|
val2 = 0x48
|
|
|
|
_mem.batt_cal4 = val2
|
|
|
|
if element.get_name() == "batt_cal5":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*10)
|
|
except Exception:
|
|
val2 = 0x44
|
|
|
|
if val2 > 9*10:
|
|
val2 = 0x44
|
|
|
|
_mem.batt_cal5 = val2
|
|
|
|
if element.get_name() == "batt_cal6":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*10)
|
|
except Exception:
|
|
val2 = 0x41
|
|
|
|
if val2 > 9*10:
|
|
val2 = 0x41
|
|
|
|
_mem.batt_cal6 = val2
|
|
|
|
|
|
|
|
# dtmf settings
|
|
if element.get_name() == "dtmf_side_tone":
|
|
_mem.dtmf_settings.side_tone = \
|
|
element.value and 1 or 0
|
|
|
|
if element.get_name() == "dtmf_separate_code":
|
|
_mem.dtmf_settings.separate_code = str(element.value)
|
|
|
|
if element.get_name() == "group_call_code":
|
|
_mem.dtmf_settings.group_call_code = str(element.value)
|
|
|
|
if element.get_name() == "dtmf_decode_response":
|
|
_mem.dtmf_settings.decode_response = \
|
|
DTMF_DECODE_RESPONSE_LIST.index(str(element.value))
|
|
|
|
if element.get_name() == "dtmf_auto_reset_time":
|
|
_mem.dtmf_settings.auto_reset_time = \
|
|
int(int(element.value)/10)
|
|
|
|
if element.get_name() == "dtmf_preload_time":
|
|
_mem.dtmf_settings.preload_time = \
|
|
int(int(element.value)/10)
|
|
|
|
if element.get_name() == "dtmf_first_code_persist_time":
|
|
_mem.dtmf_settings.first_code_persist_time = \
|
|
int(int(element.value)/10)
|
|
|
|
if element.get_name() == "dtmf_hash_persist_time":
|
|
_mem.dtmf_settings.hash_persist_time = \
|
|
int(int(element.value)/10)
|
|
|
|
if element.get_name() == "dtmf_code_persist_time":
|
|
_mem.dtmf_settings.code_persist_time = \
|
|
int(int(element.value)/10)
|
|
|
|
if element.get_name() == "dtmf_code_interval_time":
|
|
_mem.dtmf_settings.code_interval_time = \
|
|
int(int(element.value)/10)
|
|
|
|
if element.get_name() == "dtmf_dtmf_local_code":
|
|
k = str(element.value).rstrip("\x20\xff\x00") + "\x00"*8
|
|
_mem.dtmf_settings_numbers.dtmf_local_code = k[0:8]
|
|
|
|
if element.get_name() == "dtmf_dtmf_up_code":
|
|
k = str(element.value).strip("\x20\xff\x00") + "\x00"*8
|
|
_mem.dtmf_settings_numbers.dtmf_up_code = k[0:8]
|
|
|
|
if element.get_name() == "dtmf_dtmf_down_code":
|
|
k = str(element.value).rstrip("\x20\xff\x00") + "\x00"*8
|
|
_mem.dtmf_settings_numbers.dtmf_down_code = k[0:8]
|
|
|
|
# DTMF/SELCALL Live
|
|
if element.get_name() == "dtmf_live":
|
|
_mem.dtmf_live = element.value and 1 or 0
|
|
|
|
|
|
# dtmf contacts
|
|
for i in range(1, 17):
|
|
varname = "DTMF_" + str(i)
|
|
if element.get_name() == varname:
|
|
k = str(element.value).rstrip("\x20\xff\x00") + "\x00"*8
|
|
_mem.dtmfcontact[i-1].name = k[0:8]
|
|
|
|
varnumname = "DTMFNUM_" + str(i)
|
|
if element.get_name() == varnumname:
|
|
k = str(element.value).rstrip("\x20\xff\x00") + "\xff"*8
|
|
_mem.dtmfcontact[i-1].number = k[0:8]
|
|
|
|
|
|
|
|
|
|
#--------------------------------------------------- LIST
|
|
# list name
|
|
if element.get_name() == "List Name_0":
|
|
_mem.list_name[0].name = element.value
|
|
if element.get_name() == "List Name_1":
|
|
_mem.list_name[1].name = element.value
|
|
if element.get_name() == "List Name_2":
|
|
_mem.list_name[2].name = element.value
|
|
if element.get_name() == "List Name_3":
|
|
_mem.list_name[3].name = element.value
|
|
if element.get_name() == "List Name_4":
|
|
_mem.list_name[4].name = element.value
|
|
if element.get_name() == "List Name_5":
|
|
_mem.list_name[5].name = element.value
|
|
if element.get_name() == "List Name_6":
|
|
_mem.list_name[6].name = element.value
|
|
if element.get_name() == "List Name_7":
|
|
_mem.list_name[7].name = element.value
|
|
if element.get_name() == "List Name_8":
|
|
_mem.list_name[8].name = element.value
|
|
if element.get_name() == "List Name_9":
|
|
_mem.list_name[9].name = element.value
|
|
if element.get_name() == "List Name_10":
|
|
_mem.list_name[10].name = element.value
|
|
if element.get_name() == "List Name_11":
|
|
_mem.list_name[11].name = element.value
|
|
if element.get_name() == "List Name_12":
|
|
_mem.list_name[12].name = element.value
|
|
if element.get_name() == "List Name_13":
|
|
_mem.list_name[13].name = element.value
|
|
if element.get_name() == "List Name_14":
|
|
_mem.list_name[14].name = element.value
|
|
if element.get_name() == "List Name_15":
|
|
_mem.list_name[15].name = element.value
|
|
|
|
# S-LIST
|
|
if element.get_name() == "ch_list":
|
|
_mem.ch_list = GROUP_LIST.index(str(element.value))
|
|
|
|
#--------------------------------------------------- KEYS
|
|
# Key 1 short
|
|
if element.get_name() == "key1_shortpress_action":
|
|
_mem.key1_shortpress_action = element.value
|
|
|
|
# Key 2 short
|
|
if element.get_name() == "key2_shortpress_action":
|
|
_mem.key2_shortpress_action = element.value
|
|
|
|
# Key 1 long
|
|
if element.get_name() == "key1_longpress_action":
|
|
_mem.key1_longpress_action = element.value
|
|
|
|
# Key 1 long
|
|
if element.get_name() == "key2_longpress_action":
|
|
_mem.key2_longpress_action = element.value
|
|
|
|
#--------------------------------------------------- PRESET
|
|
if element.get_name() == "Preset_Name_1":
|
|
_mem.preset[0].name = element.value
|
|
if element.get_name() == "Preset_Name_2":
|
|
_mem.preset[1].name = element.value
|
|
if element.get_name() == "Preset_Name_3":
|
|
_mem.preset[2].name = element.value
|
|
if element.get_name() == "Preset_Name_4":
|
|
_mem.preset[3].name = element.value
|
|
if element.get_name() == "Preset_Name_5":
|
|
_mem.preset[4].name = element.value
|
|
if element.get_name() == "Preset_Name_6":
|
|
_mem.preset[5].name = element.value
|
|
if element.get_name() == "Preset_Name_7":
|
|
_mem.preset[6].name = element.value
|
|
if element.get_name() == "Preset_Name_8":
|
|
_mem.preset[7].name = element.value
|
|
if element.get_name() == "Preset_Name_9":
|
|
_mem.preset[8].name = element.value
|
|
if element.get_name() == "Preset_Name_10":
|
|
_mem.preset[9].name = element.value
|
|
if element.get_name() == "Preset_Name_11":
|
|
_mem.preset[10].name = element.value
|
|
if element.get_name() == "Preset_Name_12":
|
|
_mem.preset[11].name = element.value
|
|
|
|
|
|
|
|
if element.get_name() == "Low_Range_1":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[0].freq_low = val2
|
|
if element.get_name() == "Low_Range_2":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[1].freq_low = val2
|
|
if element.get_name() == "Low_Range_3":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[2].freq_low = val2
|
|
if element.get_name() == "Low_Range_4":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[3].freq_low = val2
|
|
if element.get_name() == "Low_Range_5":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[4].freq_low = val2
|
|
if element.get_name() == "Low_Range_6":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[5].freq_low = val2
|
|
if element.get_name() == "Low_Range_7":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[6].freq_low = val2
|
|
if element.get_name() == "Low_Range_8":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[7].freq_low = val2
|
|
if element.get_name() == "Low_Range_9":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[8].freq_low = val2
|
|
if element.get_name() == "Low_Range_10":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[9].freq_low = val2
|
|
if element.get_name() == "Low_Range_11":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[10].freq_low = val2
|
|
if element.get_name() == "Low_Range_12":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[11].freq_low = val2
|
|
|
|
|
|
|
|
if element.get_name() == "Up_Range_1":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[0].freq_up = val2
|
|
if element.get_name() == "Up_Range_2":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[1].freq_up = val2
|
|
if element.get_name() == "Up_Range_3":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[2].freq_up = val2
|
|
if element.get_name() == "Up_Range_4":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[3].freq_up = val2
|
|
if element.get_name() == "Up_Range_5":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[4].freq_up = val2
|
|
if element.get_name() == "Up_Range_6":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[5].freq_up = val2
|
|
if element.get_name() == "Up_Range_7":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[6].freq_up = val2
|
|
if element.get_name() == "Up_Range_8":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[7].freq_up = val2
|
|
if element.get_name() == "Up_Range_9":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[8].freq_up = val2
|
|
if element.get_name() == "Up_Range_10":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[9].freq_up = val2
|
|
if element.get_name() == "Up_Range_11":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[10].freq_up = val2
|
|
if element.get_name() == "Up_Range_12":
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*100000.0)
|
|
except Exception:
|
|
val2 = 0x00000000
|
|
|
|
if val2 > 1300.00000*100000.0:
|
|
val2 = 0x00000000
|
|
_mem.preset[11].freq_up = val2
|
|
|
|
|
|
|
|
if element.get_name() == "Step_1":
|
|
_mem.preset[0].step = STEP_LIST.index(str(element.value))
|
|
if element.get_name() == "Step_2":
|
|
_mem.preset[1].step = STEP_LIST.index(str(element.value))
|
|
if element.get_name() == "Step_3":
|
|
_mem.preset[2].step = STEP_LIST.index(str(element.value))
|
|
if element.get_name() == "Step_4":
|
|
_mem.preset[3].step = STEP_LIST.index(str(element.value))
|
|
if element.get_name() == "Step_5":
|
|
_mem.preset[4].step = STEP_LIST.index(str(element.value))
|
|
if element.get_name() == "Step_6":
|
|
_mem.preset[5].step = STEP_LIST.index(str(element.value))
|
|
if element.get_name() == "Step_7":
|
|
_mem.preset[6].step = STEP_LIST.index(str(element.value))
|
|
if element.get_name() == "Step_8":
|
|
_mem.preset[7].step = STEP_LIST.index(str(element.value))
|
|
if element.get_name() == "Step_9":
|
|
_mem.preset[8].step = STEP_LIST.index(str(element.value))
|
|
if element.get_name() == "Step_10":
|
|
_mem.preset[9].step = STEP_LIST.index(str(element.value))
|
|
if element.get_name() == "Step_11":
|
|
_mem.preset[10].step = STEP_LIST.index(str(element.value))
|
|
if element.get_name() == "Step_12":
|
|
_mem.preset[11].step = STEP_LIST.index(str(element.value))
|
|
|
|
|
|
if element.get_name() == "TX Power_1":
|
|
_mem.preset[0].txpower = TXPOWER_LIST.index(str(element.value))
|
|
if element.get_name() == "TX Power_2":
|
|
_mem.preset[1].txpower = TXPOWER_LIST.index(str(element.value))
|
|
if element.get_name() == "TX Power_3":
|
|
_mem.preset[2].txpower = TXPOWER_LIST.index(str(element.value))
|
|
if element.get_name() == "TX Power_4":
|
|
_mem.preset[3].txpower = TXPOWER_LIST.index(str(element.value))
|
|
if element.get_name() == "TX Power_5":
|
|
_mem.preset[4].txpower = TXPOWER_LIST.index(str(element.value))
|
|
if element.get_name() == "TX Power_6":
|
|
_mem.preset[5].txpower = TXPOWER_LIST.index(str(element.value))
|
|
if element.get_name() == "TX Power_7":
|
|
_mem.preset[6].txpower = TXPOWER_LIST.index(str(element.value))
|
|
if element.get_name() == "TX Power_8":
|
|
_mem.preset[7].txpower = TXPOWER_LIST.index(str(element.value))
|
|
if element.get_name() == "TX Power_9":
|
|
_mem.preset[8].txpower = TXPOWER_LIST.index(str(element.value))
|
|
if element.get_name() == "TX Power_10":
|
|
_mem.preset[9].txpower = TXPOWER_LIST.index(str(element.value))
|
|
if element.get_name() == "TX Power_11":
|
|
_mem.preset[10].txpower = TXPOWER_LIST.index(str(element.value))
|
|
if element.get_name() == "TX Power_12":
|
|
_mem.preset[11].txpower = TXPOWER_LIST.index(str(element.value))
|
|
|
|
if element.get_name() == "Bw_1":
|
|
_mem.preset[0].bw = BANDWIDTH_LIST.index(str(element.value))
|
|
if element.get_name() == "Bw_2":
|
|
_mem.preset[1].bw = BANDWIDTH_LIST.index(str(element.value))
|
|
if element.get_name() == "Bw_3":
|
|
_mem.preset[2].bw = BANDWIDTH_LIST.index(str(element.value))
|
|
if element.get_name() == "Bw_4":
|
|
_mem.preset[3].bw = BANDWIDTH_LIST.index(str(element.value))
|
|
if element.get_name() == "Bw_5":
|
|
_mem.preset[4].bw = BANDWIDTH_LIST.index(str(element.value))
|
|
if element.get_name() == "Bw_6":
|
|
_mem.preset[5].bw = BANDWIDTH_LIST.index(str(element.value))
|
|
if element.get_name() == "Bw_7":
|
|
_mem.preset[6].bw = BANDWIDTH_LIST.index(str(element.value))
|
|
if element.get_name() == "Bw_8":
|
|
_mem.preset[7].bw = BANDWIDTH_LIST.index(str(element.value))
|
|
if element.get_name() == "Bw_9":
|
|
_mem.preset[8].bw = BANDWIDTH_LIST.index(str(element.value))
|
|
if element.get_name() == "Bw_10":
|
|
_mem.preset[9].bw = BANDWIDTH_LIST.index(str(element.value))
|
|
if element.get_name() == "Bw_11":
|
|
_mem.preset[10].bw = BANDWIDTH_LIST.index(str(element.value))
|
|
if element.get_name() == "Bw_12":
|
|
_mem.preset[11].bw = BANDWIDTH_LIST.index(str(element.value))
|
|
|
|
if element.get_name() == "Mode_1":
|
|
_mem.preset[0].modulation = MODULATION_LIST.index(str(element.value))
|
|
if element.get_name() == "Mode_2":
|
|
_mem.preset[1].modulation = MODULATION_LIST.index(str(element.value))
|
|
if element.get_name() == "Mode_3":
|
|
_mem.preset[2].modulation = MODULATION_LIST.index(str(element.value))
|
|
if element.get_name() == "Mode_4":
|
|
_mem.preset[3].modulation = MODULATION_LIST.index(str(element.value))
|
|
if element.get_name() == "Mode_5":
|
|
_mem.preset[4].modulation = MODULATION_LIST.index(str(element.value))
|
|
if element.get_name() == "Mode_6":
|
|
_mem.preset[5].modulation = MODULATION_LIST.index(str(element.value))
|
|
if element.get_name() == "Mode_7":
|
|
_mem.preset[6].modulation = MODULATION_LIST.index(str(element.value))
|
|
if element.get_name() == "Mode_8":
|
|
_mem.preset[7].modulation = MODULATION_LIST.index(str(element.value))
|
|
if element.get_name() == "Mode_9":
|
|
_mem.preset[8].modulation = MODULATION_LIST.index(str(element.value))
|
|
if element.get_name() == "Mode_10":
|
|
_mem.preset[9].modulation = MODULATION_LIST.index(str(element.value))
|
|
if element.get_name() == "Mode_11":
|
|
_mem.preset[10].modulation = MODULATION_LIST.index(str(element.value))
|
|
if element.get_name() == "Mode_12":
|
|
_mem.preset[11].modulation = MODULATION_LIST.index(str(element.value))
|
|
|
|
if element.get_name() == "Sql_1":
|
|
_mem.preset[0].squelch = SQUELCH_LIST.index(str(element.value))
|
|
if element.get_name() == "Sql_2":
|
|
_mem.preset[1].squelch = SQUELCH_LIST.index(str(element.value))
|
|
if element.get_name() == "Sql_3":
|
|
_mem.preset[2].squelch = SQUELCH_LIST.index(str(element.value))
|
|
if element.get_name() == "Sql_4":
|
|
_mem.preset[3].squelch = SQUELCH_LIST.index(str(element.value))
|
|
if element.get_name() == "Sql_5":
|
|
_mem.preset[4].squelch = SQUELCH_LIST.index(str(element.value))
|
|
if element.get_name() == "Sql_6":
|
|
_mem.preset[5].squelch = SQUELCH_LIST.index(str(element.value))
|
|
if element.get_name() == "Sql_7":
|
|
_mem.preset[6].squelch = SQUELCH_LIST.index(str(element.value))
|
|
if element.get_name() == "Sql_8":
|
|
_mem.preset[7].squelch = SQUELCH_LIST.index(str(element.value))
|
|
if element.get_name() == "Sql_9":
|
|
_mem.preset[8].squelch = SQUELCH_LIST.index(str(element.value))
|
|
if element.get_name() == "Sql_10":
|
|
_mem.preset[9].squelch = SQUELCH_LIST.index(str(element.value))
|
|
if element.get_name() == "Sql_11":
|
|
_mem.preset[10].squelch = SQUELCH_LIST.index(str(element.value))
|
|
if element.get_name() == "Sql_12":
|
|
_mem.preset[11].squelch = SQUELCH_LIST.index(str(element.value))
|