ft7100.py - CHIRP

Bug #6641 » ft7100.py

Tony Brittingham, 09/25/2019 10:17 AM

    
    # Copyright 2011 Dan Smith <dsmith@danplanet.com>

    #

    # FT-2900-specific modifications by Richard Cochran, <ag6qr@sonic.net>

    # Initial work on settings by Chris Fosnight, <chris.fosnight@gmail.com>

    # FT-7100-specific modifications by Bruno Maire, <bruno@e48.ch>

    #

    # This program is free software: you can redistribute it and/or modify

    # it under the terms of the GNU General Public License as published by

    # the Free Software Foundation, either version 3 of the License, or

    # (at your option) any later version.

    #

    # This program is distributed in the hope that it will be useful,

    # but WITHOUT ANY WARRANTY; without even the implied warranty of

    # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

    # GNU General Public License for more details.

    #

    # You should have received a copy of the GNU General Public License

    # along with this program.  If not, see <http://www.gnu.org/licenses/>.

    import time

    import logging

    from chirp import util, memmap, chirp_common, bitwise, directory, errors

    from chirp.drivers.yaesu_clone import YaesuCloneModeRadio

    from chirp.settings import RadioSetting, RadioSettingGroup, \

        RadioSettingValueList, RadioSettingValueString, RadioSettings, \

        RadioSettingValueInteger, RadioSettingValueBoolean

    from textwrap import dedent

    LOG = logging.getLogger(__name__)

    ACK = "\x06"

    NB_OF_BLOCKS = 248

    BLOCK_LEN = 32

    def _send(pipe, data):

        time.sleep(0.035)   # Same delay as "FT7100 Programmer" from RT Systems

        # pipe.write(data) --> It seems, that the single bytes are sent too fast

        # so send character per character with a delay

        for ch in data:

            pipe.write(ch)

            time.sleep(0.0012)  # 0.0011 is to short. No ACK after a few packets

        echo = pipe.read(len(data))

        if data == "":

            raise Exception("Failed to read echo."

                            " Maybe serial hardware not connected."

                            " Maybe radio not powered or not in receiving mode.")

        if data != echo:

            LOG.debug("expecting echo\n%s\n", util.hexprint(data))

            LOG.debug("got echo\n%s\n", util.hexprint(echo))

            raise Exception("Got false echo. Expected: '{}', got: '{}'."

                            .format(data, echo))

    def _send_ack(pipe):

        time.sleep(0.01)  # Wait for radio input buffer ready

        # time.sleep(0.0003) is the absolute working minimum.

        # This delay is not critical for the transfer as there are not many ACKs.

        _send(pipe, ACK)

    def _wait_for_ack(pipe):

        echo = pipe.read(1)

        if echo == "":

            raise Exception("Failed to read ACK. No response from radio.")

        if echo != ACK:

            raise Exception("Failed to read ACK.  Expected: '{}', got: '{}'."

                            .format(util.hexprint(ACK), util.hexprint(echo)))

    def _download(radio):

        LOG.debug("in _download\n")

        data = ""

        for _i in range(0, 60):

            data = radio.pipe.read(BLOCK_LEN)

            LOG.debug("Header:\n%s", util.hexprint(data))

            LOG.debug("len(header) = %s\n", len(data))

            if data == radio.IDBLOCK:

                break

        if data == "":

            raise Exception("Got no data from radio.")

        if data != radio.IDBLOCK:

            raise Exception("Got false header. Expected: '{}', got: '{}'."

                            .format(radio.IDBLOCK, data))

        _send_ack(radio.pipe)

        # read 16 Byte block

        # and ignore it because it is constant. This might be a bug.

        # It was built in at the very beginning and discovered very late that the

        # data might be necessary later to write to the radio.

        # Now the data is hardcoded in _upload(radio)

        data = radio.pipe.read(16)

        _send_ack(radio.pipe)

        # initialize data, the big var that holds all memory

        data = ""

        for block_nr in range(NB_OF_BLOCKS):

            chunk = radio.pipe.read(BLOCK_LEN)

            if len(chunk) != BLOCK_LEN:

                LOG.debug("Block %i ", block_nr)

                LOG.debug("Got: %i:\n%s", len(chunk), util.hexprint(chunk))

                LOG.debug("len chunk is %i\n", len(chunk))

                raise Exception("Failed to get full data block")

            else:

                data += chunk

            _send_ack(radio.pipe)

            if radio.status_fn:

                status = chirp_common.Status()

                status.max = NB_OF_BLOCKS * BLOCK_LEN

                status.cur = len(data)

                status.msg = "Cloning from radio"

                radio.status_fn(status)

        LOG.debug("Total: %i", len(data))

        _send_ack(radio.pipe)

        # for debugging purposes, dump the channels, in hex.

        for _i in range(0, (NB_OF_BLOCKS * BLOCK_LEN) / 26):

            _start_data = 4 + 26 * _i

            chunk = data[_start_data:_start_data + 26]

            LOG.debug("channel %i:\n%s", _i-21, util.hexprint(chunk))

        return memmap.MemoryMap(data)

    def _upload(radio):

        data = radio.pipe.read(256)  # Clear buffer

        _send(radio.pipe, radio.IDBLOCK)

        _wait_for_ack(radio.pipe)

        # write 16 Byte block

        # If there should be a problem, see remarks in _download(radio)

        _send(radio.pipe, "\xEE\x77\x01\x00\x0E\x07\x0E\x07"

                          "\x00\x00\x00\x00\x00\x02\x00\x00")

        _wait_for_ack(radio.pipe)

        for block_nr in range(NB_OF_BLOCKS):

            data = radio.get_mmap()[block_nr * BLOCK_LEN:

                                    (block_nr + 1) * BLOCK_LEN]

            LOG.debug("Writing block_nr %i:\n%s", block_nr, util.hexprint(data))

            _send(radio.pipe, data)

            _wait_for_ack(radio.pipe)

            if radio.status_fn:

                status = chirp_common.Status()

                status.max = NB_OF_BLOCKS * BLOCK_LEN

                status.cur = block_nr * BLOCK_LEN

                status.msg = "Cloning to radio"

                radio.status_fn(status)

            block_nr += 1

    MEM_FORMAT = """

    struct mem {

      u8   is_used:1,

           is_masked:1,

           is_skip:1,

           unknown11:3,

           show_name:1,

           is_split:1;

      u8   unknown2;

      ul32 freq_rx_Hz;

      ul32 freq_tx_Hz;

      ul16 offset_10khz;

      u8   unknown_dependent_of_band_144_b0000_430_b0101:4,

           tuning_step_index_1_2:4;

      u8   unknown51:2,

           is_offset_minus:1,

           is_offset_plus:1,

           unknown52:1,

           tone_mode_index:3;

      u8   tone_index;

      u8   dtcs_index;

      u8   is_mode_am:1,

           unknown71:2,

           is_packet96:1

           unknown72:2,

           power_index:2;

      u8   unknown81:2,

           tuning_step_index_2_2:4,

           unknown82:2;

      char name[6];

      u8   unknown9;

      u8   unknownA;

    };

    // Settings are often present multiple times.

    // The memories which is written to are mapped here

    struct

    {

    #seekto 0x41;

      u8        current_band;

    #seekto 0xa1;

      u8        apo;

    #seekto 0xa2;

      u8        ars_vhf;

    #seekto 0xe2;

      u8        ars_uhf;

    #seekto 0xa3;

      u8        arts_vhf;

    #seekto 0xa3;

      u8        arts_uhf;

    #seekto 0xa4;

      u8        beep;

    #seekto 0xa5;

      u8        cwid;

    #seekto 0x80;

      char        cwidw[6];

    #seekto 0xa7;

      u8        dim;

    #seekto 0xaa;

      u8        dcsnr_vhf;

    #seekto 0xea;

      u8        dcsnr_uhf;

    #seekto 0xab;

      u8        disp;

    #seekto 0xac;

      u8        dtmfd;

    #seekto 0xad;

      u8        dtmfs;

    #seekto 0xae;

      u8        dtmfw;

    #seekto 0xb0;

      u8        lockt;

    #seekto 0xb1;

      u8        mic;

    #seekto 0xb2;

      u8        mute;

    #seekto 0xb4;

      u8        button[4];

    #seekto 0xb8;

      u8        rf_sql_vhf;

    #seekto 0xf8;

      u8        rf_sql_uhf;

    #seekto 0xb9;

      u8        scan_vhf;

    #seekto 0xf9;

      u8        scan_uhf;

    #seekto 0xbc;

      u8        speaker_cnt;

    #seekto 0xff;

      u8        tot;

    #seekto 0xc0;

      u8        txnar_vhf;

    #seekto 0x100;

      u8        txnar_uhf;

    #seekto 0xc1;

      u8        vfotr;

    #seekto 0xc2;

      u8        am;

    } overlay;

    // All known memories

    #seekto 0x20;

      u8        nb_mem_used_vhf;

    #seekto 0x22;

      u8        nb_mem_used_vhf_and_limits;

    #seekto 0x24;

      u8        nb_mem_used_uhf;

    #seekto 0x26;

      u8        nb_mem_used_uhf_and_limits;

    #seekto 0x41;

      u8        current_band;

    #seekto 0x42;

      u8        current_nb_mem_used_vhf_maybe_not;

    #seekto 0x4c;

      u8        priority_channel_maybe_1;   // not_implemented

      u8        priority_channel_maybe_2;   // not_implemented

      u8        priority_channel;           // not_implemented

    #seekto 0x87;

      u8        opt_01_apo_1_4;

    #seekto 0xa1;

      u8        opt_01_apo_2_4;

    #seekto 0xc5;

      u8        opt_01_apo_3_4;

    #seekto 0xe1;

      u8        opt_01_apo_4_4;

    #seekto 0x88;

      u8        opt_02_ars_vhf_1_2;

    #seekto 0xa2;

      u8        opt_02_ars_vhf_2_2;

    #seekto 0xc6;

      u8        opt_02_ars_uhf_1_2;

    #seekto 0xe2;

      u8        opt_02_ars_uhf_2_2;

    #seekto 0x89;

      u8        opt_03_arts_mode_vhf_1_2;

    #seekto 0xa3;

      u8        opt_03_arts_mode_vhf_2_2;

    #seekto 0xc7;

      u8        opt_03_arts_mode_uhf_1_2;

    #seekto 0xa3;

      u8        opt_03_arts_mode_vhf_2_2;

    #seekto 0x8a;

      u8        opt_04_beep_1_2;

    #seekto 0xa4;

      u8        opt_04_beep_2_2;

    #seekto 0x8b;

      u8        opt_05_cwid_on_1_4;

    #seekto 0xa5;

      u8        opt_05_cwid_on_2_4;

    #seekto 0xc9;

      u8        opt_05_cwid_on_3_4;

    #seekto 0xe5;

      u8        opt_05_cwid_on_4_4;

    #seekto 0x80;

      char        opt_06_cwidw[6];

    #seekto 0x8d;

      u8        opt_07_dim_1_4;

    #seekto 0xa7;

      u8        opt_07_dim_2_4;

    #seekto 0xcb;

      u8        opt_07_dim_3_4;

    #seekto 0xe7;

      u8        opt_07_dim_4_4;

    #seekto 0x90;

      u8        opt_10_dcsnr_vhf_1_2;

    #seekto 0xaa;

      u8        opt_10_dcsnr_vhf_2_2;

    #seekto 0xce;

      u8        opt_10_dcsnr_uhf_1_2;

    #seekto 0xea;

      u8        opt_10_dcsnr_uhf_2_2;

    #seekto 0x91;

      u8        opt_11_disp_1_4;

    #seekto 0xab;

      u8        opt_11_disp_2_4;

    #seekto 0xcf;

      u8        opt_11_disp_3_4;

    #seekto 0xeb;

      u8        opt_11_disp_4_4;

    #seekto 0x92;

      u8        opt_12_dtmf_delay_1_4;

    #seekto 0xac;

      u8        opt_12_dtmf_delay_2_4;

    #seekto 0xd0;

      u8        opt_12_dtmf_delay_3_4;

    #seekto 0xec;

      u8        opt_12_dtmf_delay_4_4;

    #seekto 0x93;

      u8        opt_13_dtmf_speed_1_4;

    #seekto 0xad;

      u8        opt_13_dtmf_speed_2_4;

    #seekto 0xd1;

      u8        opt_13_dtmf_speed_3_4;

    #seekto 0xed;

      u8        opt_13_dtmf_speed_4_4;

    #seekto 0x94;

      u8        opt_14_dtmfw_index_1_4;

    #seekto 0xae;

      u8        opt_14_dtmfw_index_2_4;

    #seekto 0xd2;

      u8        opt_14_dtmfw_index_3_4;

    #seekto 0xee;

      u8        opt_14_dtmfw_index_4_4;

    #seekto 0x96;

      u8        opt_16_lockt_1_4;

    #seekto 0xb0;

      u8        opt_16_lockt_2_4;

    #seekto 0xd4;

      u8        opt_16_lockt_3_4;

    #seekto 0xf0;

      u8        opt_16_lockt_4_4;

    #seekto 0x97;

      u8        opt_17_mic_MH48_1_4;

    #seekto 0xb1;

      u8        opt_17_mic_MH48_2_4;

    #seekto 0xd5;

      u8        opt_17_mic_MH48_3_4;

    #seekto 0xf1;

      u8        opt_17_mic_MH48_4_4;

    #seekto 0x98;

      u8        opt_18_mute_1_4;

    #seekto 0xb2;

      u8        opt_18_mute_2_4;

    #seekto 0xd6;

      u8        opt_18_mute_3_4;

    #seekto 0xf2;

      u8        opt_18_mute_4_4;

    #seekto 0x9a;

      u8        opt_20_pg_p_1_4[4];

    #seekto 0xb4;

      u8        opt_20_pg_p_2_4[4];

    #seekto 0xd8;

      u8        opt_20_pg_p_3_4[4];

    #seekto 0xf4;

      u8        opt_20_pg_p_4_4[4];

    #seekto 0x9e;

      u8        opt_24_rf_sql_vhf_1_2;

    #seekto 0xb8;

      u8        opt_24_rf_sql_vhf_2_2;

    #seekto 0xdc;

      u8        opt_24_rf_sql_uhf_1_2;

    #seekto 0xf8;

      u8        opt_24_rf_sql_uhf_2_2;

    #seekto 0x9f;

      u8        opt_25_scan_resume_vhf_1_2;

    #seekto 0xb9;

      u8        opt_25_scan_resume_vhf_2_2;

    #seekto 0xdd;

      u8        opt_25_scan_resume_uhf_1_2;

    #seekto 0xf9;

      u8        opt_25_scan_resume_uhf_2_2;

    #seekto 0xbc;

      u8        opt_28_speaker_cnt_1_2;

    #seekto 0xfc;

      u8        opt_28_speaker_cnt_2_2;

    #seekto 0xbf;

      u8        opt_31_tot_1_2;

    #seekto 0xff;

      u8        opt_31_tot_2_2;

    #seekto 0xc0;

      u8        opt_32_tx_nar_vhf;

    #seekto 0x100;

      u8        opt_32_tx_nar_uhf;

    #seekto 0xc1;

      u8        opt_33_vfo_tr;

    #seekto 0xc2;

      u8        opt_34_am_1_2;

    #seekto 0x102;

      u8        opt_34_am_2_2;

    #seekto 260;

    struct {

      struct mem mem_struct;

      char        fill_ff[2];

    } unknown00;

    struct {

      struct mem mem_struct;

      char        fill_00[6];

    } current_vfo_vhf_uhf[2];

    struct {

      struct mem mem_struct;

      char        fill_ff[6];

    } current_mem_vhf_uhf[2];

    struct {

      struct mem mem_struct;

      char        fill_ff[6];

    } home_vhf_uhf[2];

    struct {

      struct mem mem_struct;

      char        fill_010003000000[6];

    } vhome;

    struct {

      struct mem mem_struct;

      char        fill_010001000000[6];

    } unknown01;

    struct {

      char name[32];

    } Vertex_Standard_AH003M_Backup_DT;

    struct mem

      memory[260];

    struct {

      char name[24];

    } Vertex_Standard_AH003M;

    struct {

      u8 dtmf[16];

    } dtmf_mem[16];

    """

    MODES_VHF = ["FM", "AM"]

    MODES_UHF = ["FM"]      # AM can be set but is ignored by the radio

    DUPLEX = ["", "-", "+", "split"]

    TONE_MODES_RADIO = ["", "Tone", "TSQL", "CTCSS Bell", "DTCS"]

    TONE_MODES = ["", "Tone", "TSQL", "DTCS"]

    POWER_LEVELS = [

        chirp_common.PowerLevel("Low", watts=5),

        chirp_common.PowerLevel("Low2", watts=10),

        chirp_common.PowerLevel("Low3", watts=20),

        chirp_common.PowerLevel("High", watts=35),

        ]

    TUNING_STEPS = [5.0, 10.0, 12.5, 15.0, 20.0, 25.0, 50.0]

    SKIP_VALUES = ["", "S"]

    CHARSET = r"!\"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^ _"

    DTMF_CHARSET = "0123456789*# "

    SPECIAL_CHANS = ['VFO-VHF', 'VFO-UHF', 'Home-VHF', 'Home-UHF', 'VFO', 'Home']

    SCAN_LIMITS = ["L1", "U1", "L2", "U2", "L3", "U3", "L4", "U4", "L5", "U5"]

    def do_download(radio):

        """This is your download function"""

        return _download(radio)

    @directory.register

    class FT7100Radio(YaesuCloneModeRadio):

        """Yaesu FT-7100M"""

        MODEL = "FT-7100M"

        VARIANT = ""

        IDBLOCK = "Vartex Standard AH003M M-Map V04"

        BAUD_RATE = 9600

        # Return information about this radio's features, including

        # how many memories it has, what bands it supports, etc

        def get_features(self):

            LOG.debug("get_features")

            rf = chirp_common.RadioFeatures()

            rf.has_bank = False

            rf.memory_bounds = (0, 259)

            # This radio supports 120 + 10 + 120 + 10 = 260 memories

            # These are zero based for chirpc

            rf.valid_bands = [

                (108000000, 180000000),  # Supports 2-meters tx

                (320000000, 999990000),  # Supports 70-centimeters tx

                ]

            rf.can_odd_split = True

            rf.has_ctone = True

            rf.has_rx_dtcs = True

            rf.has_cross = False

            rf.has_dtcs_polarity = False

            rf.has_bank = False

            rf.has_bank_names = False

            rf.has_settings = True

            rf.has_sub_devices = True

            rf.valid_tuning_steps = TUNING_STEPS

            rf.valid_modes = MODES_VHF

            rf.valid_tmodes = TONE_MODES

            rf.valid_power_levels = POWER_LEVELS

            rf.valid_duplexes = DUPLEX

            rf.valid_skips = SKIP_VALUES

            rf.valid_name_length = 6

            rf.valid_characters = CHARSET

            rf.valid_special_chans = SPECIAL_CHANS

            return rf

        def sync_in(self):

            start = time.time()

            try:

                self._mmap = _download(self)

            except errors.RadioError:

                raise

            except Exception, e:

                raise errors.RadioError("Failed to communicate with radio: %s" % e)

            LOG.info("Downloaded in %.2f sec", (time.time() - start))

            self.process_mmap()

        def sync_out(self):

            self.pipe.timeout = 1

            start = time.time()

            try:

                _upload(self)

            except errors.RadioError:

                raise

            except Exception, e:

                raise errors.RadioError("Failed to communicate with radio: %s" % e)

            LOG.info("Uploaded in %.2f sec", (time.time() - start))

        def process_mmap(self):

            self._memobj = bitwise.parse(MEM_FORMAT, self._mmap)

        def get_raw_memory(self, number):

            return repr(self._memobj.memory[number])

        def get_memory(self, number):

            LOG.debug("get_memory Number: {}".format(number))

            # Create a high-level memory object to return to the UI

            mem = chirp_common.Memory()

            # Get a low-level memory object mapped to the image

            if number < 0:

                number = SPECIAL_CHANS[number + 10]

            if isinstance(number, str):

                mem.number = -10 + SPECIAL_CHANS.index(number)

                mem.extd_number = number

                band = 0

                if self._memobj.overlay.current_band != 0:

                    band = 1

                if number == 'VFO-VHF':

                    _mem = self._memobj.current_vfo_vhf_uhf[0].mem_struct

                elif number == 'VFO-UHF':

                    _mem = self._memobj.current_vfo_vhf_uhf[1].mem_struct

                elif number == 'Home-VHF':

                    _mem = self._memobj.home_vhf_uhf[0].mem_struct

                elif number == 'Home-UHF':

                    _mem = self._memobj.home_vhf_uhf[1].mem_struct

                elif number == 'VFO':

                    _mem = self._memobj.current_vfo_vhf_uhf[band].mem_struct

                elif number == 'Home':

                    _mem = self._memobj.home_vhf_uhf[band].mem_struct

                _mem.is_used = True

            else:

                mem.number = number                 # Set the memory number

                _mem = self._memobj.memory[number]

                upper_channel = self._memobj.nb_mem_used_vhf

                upper_limit = self._memobj.nb_mem_used_vhf_and_limits

                if number >= upper_channel and number < upper_limit:

                    i = number - upper_channel

                    mem.extd_number = SCAN_LIMITS[i]

                if number >= 260-10:

                    i = number - (260-10)

                    mem.extd_number = SCAN_LIMITS[i]

            # Convert your low-level frequency to Hertz

            mem.freq = int(_mem.freq_rx_Hz)

            mem.name = str(_mem.name).rstrip()  # Set the alpha tag

            mem.rtone = chirp_common.TONES[_mem.tone_index]

            mem.ctone = chirp_common.TONES[_mem.tone_index]

            mem.dtcs = chirp_common.DTCS_CODES[_mem.dtcs_index]

            mem.rx_dtcs = chirp_common.DTCS_CODES[_mem.dtcs_index]

            tmode_radio = TONE_MODES_RADIO[_mem.tone_mode_index]

            # CTCSS Bell is TSQL plus a flag in the extra setting

            is_ctcss_bell = tmode_radio == "CTCSS Bell"

            if is_ctcss_bell:

                mem.tmode = "TSQL"

            else:

                mem.tmode = tmode_radio

            mem.duplex = ""

            if _mem.is_offset_plus:

                mem.duplex = "+"

            elif _mem.is_offset_minus:

                mem.duplex = "-"

            elif _mem.is_split:

                mem.duplex = "split"

            if _mem.is_split:

                mem.offset = int(_mem.freq_tx_Hz)

            else:

                mem.offset = int(_mem.offset_10khz)*10000   # 10kHz to Hz

            if _mem.is_mode_am:

                mem.mode = "AM"

            else:

                mem.mode = "FM"

            mem.power = POWER_LEVELS[_mem.power_index]

            mem.tuning_step = TUNING_STEPS[_mem.tuning_step_index_1_2]

            if _mem.is_skip:

                mem.skip = "S"

            else:

                mem.skip = ""

            # mem.comment = ""

            mem.empty = not _mem.is_used

            mem.extra = RadioSettingGroup("Extra", "extra")

            rs = RadioSetting("show_name", "Show Name",

                              RadioSettingValueBoolean(_mem.show_name))

            mem.extra.append(rs)

            rs = RadioSetting("is_masked", "Is Masked",

                              RadioSettingValueBoolean(_mem.is_masked))

            mem.extra.append(rs)

            rs = RadioSetting("is_packet96", "Packet 9600",

                              RadioSettingValueBoolean(_mem.is_packet96))

            mem.extra.append(rs)

            rs = RadioSetting("is_ctcss_bell", "CTCSS Bell",

                              RadioSettingValueBoolean(is_ctcss_bell))

            mem.extra.append(rs)

            return mem

        def set_memory(self, mem):

            LOG.debug("set_memory Number: {}".format(mem.number))

            if mem.number < 0:

                number = SPECIAL_CHANS[mem.number+10]

                if number == 'VFO-VHF':

                    _mem = self._memobj.current_vfo_vhf_uhf[0].mem_struct

                elif number == 'VFO-UHF':

                    _mem = self._memobj.current_vfo_vhf_uhf[1].mem_struct

                elif number == 'Home-VHF':

                    _mem = self._memobj.home_vhf_uhf[0].mem_struct

                elif number == 'Home-UHF':

                    _mem = self._memobj.home_vhf_uhf[1].mem_struct

                else:

                    raise errors.RadioError("Unexpected Memory Number: {}"

                                            .format(mem.number))

            else:

                _mem = self._memobj.memory[mem.number]

            _mem.name = mem.name.ljust(6)

            _mem.tone_index = chirp_common.TONES.index(mem.rtone)

            _mem.dtcs_index = chirp_common.DTCS_CODES.index(mem.dtcs)

            if mem.tmode == "TSQL":

                _mem.tone_index = chirp_common.TONES.index(mem.ctone)

            if mem.tmode == "DTSC-R":

                _mem.dtcs_index = chirp_common.DTCS_CODES.index(mem.rx_dtcs)

            _mem.is_offset_plus = 0

            _mem.is_offset_minus = 0

            _mem.is_split = 0

            _mem.freq_rx_Hz = mem.freq

            _mem.freq_tx_Hz = mem.freq

            if mem.duplex == "+":

                _mem.is_offset_plus = 1

                _mem.freq_tx_Hz = mem.freq + mem.offset

                _mem.offset_10khz = int(mem.offset/10000)

            elif mem.duplex == "-":

                _mem.is_offset_minus = 1

                _mem.freq_tx_Hz = mem.freq - mem.offset

                _mem.offset_10khz = int(mem.offset/10000)

            elif mem.duplex == "split":

                _mem.is_split = 1

                _mem.freq_tx_Hz = mem.offset

                # No change to _mem.offset_10khz

            _mem.is_mode_am = mem.mode == "AM"

            if mem.power:

                _mem.power_index = POWER_LEVELS.index(mem.power)

            _mem.tuning_step_index_1_2 = TUNING_STEPS.index(mem.tuning_step)

            _mem.is_skip = mem.skip == "S"

            _mem.is_used = not mem.empty

            # if name not empty: show name

            _mem.show_name = mem.name.strip() != ""

            # In testmode there is no setting in mem.extra

            # This is why the following line is not located in the else part of

            # the if structure below

            _mem.tone_mode_index = TONE_MODES_RADIO.index(mem.tmode)

            for setting in mem.extra:

                if setting.get_name() == "is_ctcss_bell":

                    if mem.tmode == "TSQL" and setting.value:

                        _mem.tone_mode_index = TONE_MODES_RADIO.index("CTCSS Bell")

                else:

                    setattr(_mem, setting.get_name(), setting.value)

            LOG.debug("encoded mem\n%s\n", (util.hexprint(_mem.get_raw()[0:25])))

            LOG.debug(repr(_mem))

        def get_settings(self):

            common = RadioSettingGroup("common", "Common Settings")

            band = RadioSettingGroup("band", "Band dependent Settings")

            arts = RadioSettingGroup("arts",

                                     "Auto Range Transponder System (ARTS)")

            dtmf = RadioSettingGroup("dtmf", "DTMF Settings")

            mic_button = RadioSettingGroup("mic_button", "Microphone Buttons")

            setmode = RadioSettings(common, band, arts, dtmf, mic_button)

            _overlay = self._memobj.overlay

            # numbers and names of settings refer to the way they're

            # presented in the set menu, as well as the list starting on

            # page 49 of the manual

            # 1 Automatic Power Off

            opts = [

                "Off", "30 Min",

                "1 Hour", "1.5 Hours",

                "2 Hours", "2.5 Hours",

                "3 Hours", "3.5 Hours",

                "4 Hours", "4.5 Hours",

                "5 Hours", "5.5 Hours",

                "6 Hours", "6.5 Hours",

                "7 Hours", "7.5 Hours",

                "8 Hours", "8.5 Hours",

                "9 Hours", "9.5 Hours",

                "10 Hours", "10.5 Hours",

                "11 Hours", "11.5 Hours",

                "12 Hours",

                ]

            common.append(

                RadioSetting(

                    "apo", "Automatic Power Off",

                    RadioSettingValueList(opts, opts[_overlay.apo])))

            # 2 Automatic Repeater Shift function

            opts = ["Off", "On"]

            band.append(

                RadioSetting(

                    "ars_vhf", "Automatic Repeater Shift VHF",

                    RadioSettingValueList(opts, opts[_overlay.ars_vhf])))

            band.append(

                RadioSetting(

                    "ars_uhf", "Automatic Repeater Shift UHF",

                    RadioSettingValueList(opts, opts[_overlay.ars_uhf])))

            # 3  Selects the ARTS mode.

            # -> Only useful to set it on the radio directly

            # 4 Enables/disables the key/button beeper.

            opts = ["Off", "On"]

            common.append(

                RadioSetting(

                    "beep", "Key/Button Beep",

                    RadioSettingValueList(opts, opts[_overlay.beep])))

            # 5 Enables/disables the CW IDer during ARTS operation.

            opts = ["Off", "On"]

            arts.append(

                RadioSetting(

                    "cwid", "Enables/Disables the CW ID",

                    RadioSettingValueList(opts, opts[_overlay.cwid])))

            # 6  Callsign during ARTS operation.

            cwidw = _overlay.cwidw.get_raw()

            cwidw = cwidw.rstrip('\x00')

            val = RadioSettingValueString(0, 6, cwidw)

            val.set_charset(CHARSET)

            rs = RadioSetting("cwidw", "CW Identifier Callsign", val)

            def apply_cwid(setting):

                value_string = setting.value.get_value()

                _overlay.cwidw.set_value(value_string)

            rs.set_apply_callback(apply_cwid)

            arts.append(rs)

            # 7 Front panel display's illumination level.

            opts = ["0: Off", "1: Max", "2", "3", "4", "5", "6", "7: Min"]

            common.append(

                RadioSetting(

                    "dim", "Display Illumination",

                    RadioSettingValueList(opts, opts[_overlay.dim])))

            # 8 Setting the DCS code number.

            #   Note: This Menu item can be set independently for each band,

            #         and independently in each memory.

            # 9 Activates the DCS Code Search

            # -> Only useful if set on radio itself

            # 10 Selects 'Normal' or 'Inverted' DCS coding.

            opts = ["TRX Normal", "RX Reversed", "TX Reversed", "TRX Reversed"]

            band.append(

                RadioSetting(

                    "dcsnr_vhf", "DCS coding VHF",

                    RadioSettingValueList(opts, opts[_overlay.dcsnr_vhf])))

            band.append(

                RadioSetting(

                    "dcsnr_uhf", "DCS coding UHF",

                    RadioSettingValueList(opts, opts[_overlay.dcsnr_uhf])))

            # 11 Selects the 'sub' band display format

            opts = ["Frequency", "Off / Sub Band disabled",

                    "DC Input Voltage", "CW ID"]

            common.append(

                RadioSetting(

                    "disp", "Sub Band Display Format",

                    RadioSettingValueList(opts, opts[_overlay.disp])))

            # 12 Setting the DTMF Autodialer delay time

            opts = ["50 ms", "250 ms", "450 ms", "750 ms", "1 s"]

            dtmf.append(

                RadioSetting(

                    "dtmfd", "Autodialer delay time",

                    RadioSettingValueList(opts, opts[_overlay.dtmfd])))

            # 13 Setting the DTMF Autodialer sending speed

            opts = ["50 ms", "75 ms", "100 ms"]

            dtmf.append(

                RadioSetting(

                    "dtmfs", "Autodialer sending speed",

                    RadioSettingValueList(opts, opts[_overlay.dtmfs])))

            # 14 Current DTMF Autodialer memory

            rs = RadioSetting("dtmfw", "Current Autodialer memory",

                              RadioSettingValueInteger(1, 16, _overlay.dtmfw + 1))

            def apply_dtmfw(setting):

                _overlay.dtmfw = setting.value.get_value() - 1

            rs.set_apply_callback(apply_dtmfw)

            dtmf.append(rs)

            # DTMF Memory

            for i in range(16):

                dtmf_string = ""

                for j in range(16):

                    dtmf_char = ''

                    dtmf_int = int(self._memobj.dtmf_mem[i].dtmf[j])

                    if dtmf_int < 10:

                        dtmf_char = str(dtmf_int)

                    elif dtmf_int == 14:

                        dtmf_char = '*'

                    elif dtmf_int == 15:

                        dtmf_char = '#'

                    elif dtmf_int == 255:

                        break

                    dtmf_string += dtmf_char

                radio_setting_value_string = RadioSettingValueString(0, 16,

                                                                     dtmf_string)

                radio_setting_value_string.set_charset(DTMF_CHARSET)

                rs = RadioSetting("dtmf_{0:02d}".format(i),

                                  "DTMF Mem " + str(i+1),

                                  radio_setting_value_string)

                def apply_dtmf(setting, index):

                    radio_setting_value_string = setting.value.get_value().rstrip()

                    j = 0

                    for dtmf_char in radio_setting_value_string:

                        dtmf_int = 255

                        if dtmf_char in "0123456789":

                            dtmf_int = int(dtmf_char)

                        elif dtmf_char == '*':

                            dtmf_int = 14

                        elif dtmf_char == '#':

                            dtmf_int = 15

                        if dtmf_int < 255:

                            self._memobj.dtmf_mem[index].dtmf[j] = dtmf_int

                            j += 1

                    if j < 16:

                        self._memobj.dtmf_mem[index].dtmf[j] = 255

                rs.set_apply_callback(apply_dtmf, i)

                dtmf.append(rs)

            # 16 Enables/disables the PTT switch lock

            opts = ["Off", "Band A", "Band B", "Both"]

            common.append(

                RadioSetting(

                    "lockt", "PTT switch lock",

                    RadioSettingValueList(opts, opts[_overlay.lockt])))

            # 17 Selects the Microphone type to be used

            opts = ["MH-42", "MH-48"]

            common.append(

                RadioSetting(

                    "mic", "Microphone type",

                    RadioSettingValueList(opts, opts[_overlay.mic])))

            # 18 Reduces the audio level on the sub receiver when the

            #    main receiver is active

            opts = ["Off", "On"]

            common.append(

                RadioSetting(

                    "mute", "Mute Sub Receiver",

                    RadioSettingValueList(opts, opts[_overlay.mute])))

            # 20 - 23 Programming the microphones button assignment

            buttons = [

                "ACC / P1",

                "P / P2",

                "P1 / P3",

                "P2 / P4",

                ]

            opts_button = ["Low", "Tone", "MHz", "Rev", "Home", "Band",

                           "VFO / Memory", "Sql Off", "1750 Hz Tone Call",

                           "Repeater", "Priority"]

            for i, button in enumerate(buttons):

                rs = RadioSetting(

                    "button" + str(i), button,

                    RadioSettingValueList(opts_button,

                                          opts_button[_overlay.button[i]]))

                def apply_button(setting, index):

                    value_string = setting.value.get_value()

                    value_int = opts_button.index(value_string)

                    _overlay.button[index] = value_int

                rs.set_apply_callback(apply_button, i)

                mic_button.append(rs)

            # 24 Adjusts the RF SQL threshold level

            opts = ["Off", "S-1", "S-5", "S-9", "S-FULL"]

            band.append(

                RadioSetting(

                    "rf_sql_vhf", "RF Sql VHF",

                    RadioSettingValueList(opts, opts[_overlay.rf_sql_vhf])))

            band.append(

                RadioSetting(

                    "rf_sql_uhf", "RF Sql UHF",

                    RadioSettingValueList(opts, opts[_overlay.rf_sql_uhf])))

            # 25 Selects the Scan-Resume mode

            opts = ["Busy", "Time"]

            band.append(

                RadioSetting(

                    "scan_vhf", "Scan-Resume VHF",

                    RadioSettingValueList(opts, opts[_overlay.scan_vhf])))

            band.append(

                RadioSetting(

                    "scan_uhf", "Scan-Resume UHF",

                    RadioSettingValueList(opts, opts[_overlay.scan_uhf])))

            # 28 Defining the audio path to the external speaker

            opts = ["Off", "Band A", "Band B", "Both"]

            common.append(

                RadioSetting(

                    "speaker_cnt", "External Speaker",

                    RadioSettingValueList(opts, opts[_overlay.speaker_cnt])))

            # 31 Sets the Time-Out Timer

            opts = ["Off", "Band A", "Band B", "Both"]

            common.append(

                RadioSetting(

                    "tot", "TX Time-Out [Min.] (0 = Off)",

                    RadioSettingValueInteger(0, 30, _overlay.tot)))

            # 32 Reducing the MIC Gain (and Deviation)

            opts = ["Off", "On"]

            band.append(

                RadioSetting(

                    "txnar_vhf", "TX Narrowband VHF",

                    RadioSettingValueList(opts, opts[_overlay.txnar_vhf])))

            band.append(

                RadioSetting(

                    "txnar_uhf", "TX Narrowband UHF",

                    RadioSettingValueList(opts, opts[_overlay.txnar_uhf])))

            # 33 Enables/disables the VFO Tracking feature

            opts = ["Off", "On"]

            common.append(

                RadioSetting(

                    "vfotr", "VFO Tracking",

                    RadioSettingValueList(opts, opts[_overlay.vfotr])))

            # 34 Selects the receiving mode on the VHF band

            opts = ["Inhibit (only FM)", "AM", "Auto"]

            common.append(

                RadioSetting(

                    "am", "AM Mode",

                    RadioSettingValueList(opts, opts[_overlay.am])))

            # Current Band

            opts = ["VHF", "UHF"]

            common.append(

                RadioSetting(

                    "current_band", "Current Band",

                    RadioSettingValueList(opts, opts[_overlay.current_band])))

            # Show number of VHF and UHF channels

            val = RadioSettingValueString(0, 7,

                                          str(int(self._memobj.nb_mem_used_vhf)))

            val.set_mutable(False)

            rs = RadioSetting("num_chan_vhf", "Number of VHF channels", val)

            common.append(rs)

            val = RadioSettingValueString(0, 7,

                                          str(int(self._memobj.nb_mem_used_uhf)))

            val.set_mutable(False)

            rs = RadioSetting("num_chan_uhf", "Number of UHF channels", val)

            common.append(rs)

            return setmode

        def set_settings(self, uisettings):

            _overlay = self._memobj.overlay

            for element in uisettings:

                if not isinstance(element, RadioSetting):

                    self.set_settings(element)

                    continue

                if not element.changed():

                    continue

                try:

                    name = element.get_name()

                    value = element.value

                    if element.has_apply_callback():

                        LOG.debug("Using apply callback")

                        element.run_apply_callback()

                    else:

                        setattr(_overlay, name, value)

                    LOG.debug("Setting %s: %s", name, value)

                except Exception, e:

                    LOG.debug(element.get_name())

                    raise

        def _get_upper_vhf_limit(self):

            if self._memobj is None:

                # test with tox has no _memobj

                upper_vhf_limit = 130

            else:

                upper_vhf_limit = int(self._memobj.nb_mem_used_vhf_and_limits)

            return upper_vhf_limit

        def _get_upper_uhf_limit(self):

            if self._memobj is None:

                # test with tox has no _memobj

                upper_uhf_limit = 130

            else:

                upper_uhf_limit = int(self._memobj.nb_mem_used_uhf_and_limits)

            return upper_uhf_limit

        @classmethod

        def match_model(cls, filedata, filename):

            return filedata[0x1ec0:0x1ec0+len(cls.IDBLOCK)] == cls.IDBLOCK

        @classmethod

        def get_prompts(cls):

            rp = chirp_common.RadioPrompts()

            rp.pre_download = _(dedent("""\

                1. Turn Radio off.

                2. Connect data cable.

                3. While holding "TONE" and "REV" buttons, turn radio on.

                4. <b>After clicking OK</b>, press "TONE" to send image."""))

            rp.pre_upload = _(dedent("""\

                1. Turn Radio off.

                2. Connect data cable.

                3. While holding "TONE" and "REV" buttons, turn radio on.

                4. Press "REV" to receive image.

                5. Make sure display says "CLONE RX" and green led is blinking

                6. Click OK to start transfer."""))

            return rp

        def get_sub_devices(self):

            if not self.VARIANT:

                return [FT7100RadioVHF(self._mmap),

                        FT7100RadioUHF(self._mmap)]

            else:

                return []

    class FT7100RadioVHF(FT7100Radio):

        VARIANT = "VHF Band"

        def get_features(self):

            LOG.debug("VHF get_features")

            upper_vhf_limit = self._get_upper_vhf_limit()

            rf = FT7100Radio.get_features(self)

            rf.memory_bounds = (1, upper_vhf_limit)

            # Normally this band supports 120 + 10 memories. 1 based for chirpw

            rf.valid_bands = [(108000000, 180000000)]  # Supports 2-meters tx

            rf.valid_modes = MODES_VHF

            rf.valid_special_chans = ['VFO', 'Home']

            rf.has_sub_devices = False

            return rf

        def get_memory(self, number):

            LOG.debug("get_memory VHF Number: {}".format(number))

            if isinstance(number, int):

                if number >= 0:

                    mem = FT7100Radio.get_memory(self, number + 0 - 1)

                else:

                    mem = FT7100Radio.get_memory(self, number)

                mem.number = number

            else:

                mem = FT7100Radio.get_memory(self, number + '-VHF')

                mem.extd_number = number

                mem.immutable = ["number", "extd_number", "skip"]

            return mem

        def set_memory(self, mem):

            LOG.debug("set_memory VHF Number: {}".format(mem.number))

            # mem is used further in test by tox. So save the modified members.

            _number = mem.number

            if isinstance(mem.number, int):

                if mem.number >= 0:

                    mem.number += -1

            else:

                mem.number += '-VHF'

            super(FT7100RadioVHF, self).set_memory(mem)

            # Restore modified members

            mem.number = _number

            return

    class FT7100RadioUHF(FT7100Radio):

        VARIANT = "UHF Band"

        def get_features(self):

            LOG.debug("UHF get_features")

            upper_uhf_limit = self._get_upper_uhf_limit()

            rf = FT7100Radio.get_features(self)

            rf.memory_bounds = (1, upper_uhf_limit)

            # Normally this band supports 120 + 10 memories. 1 based for chirpw

            rf.valid_bands = [(320000000, 999990000)]  # Supports 70-centimeters tx

            rf.valid_modes = MODES_UHF

            rf.valid_special_chans = ['VFO', 'Home']

            rf.has_sub_devices = False

            return rf

        def get_memory(self, number):

            LOG.debug("get_memory UHF Number: {}".format(number))

            upper_vhf_limit = self._get_upper_vhf_limit()

            if isinstance(number, int):

                if number >= 0:

                    mem = FT7100Radio.get_memory(self, number +

                                                 upper_vhf_limit - 1)

                else:

                    mem = FT7100Radio.get_memory(self, number)

                mem.number = number

            else:

                mem = FT7100Radio.get_memory(self, number + '-UHF')

                mem.extd_number = number

                mem.immutable = ["number", "extd_number", "skip"]

            return mem

        def set_memory(self, mem):

            LOG.debug("set_memory UHF Number: {}".format(mem.number))

            # mem is used further in test by tox. So save the modified members.

            _number = mem.number

            upper_vhf_limit = self._get_upper_vhf_limit()

            if isinstance(mem.number, int):

                if mem.number >= 0:

                    mem.number += upper_vhf_limit - 1

            else:

                mem.number += '-UHF'

            super(FT7100RadioUHF, self).set_memory(mem)

            # Restore modified members

            mem.number = _number

            return

« Previous
1
2
Next »

(2-2/2)

Project

General

Profile

CHIRP

Bug #6641 » ft7100.py