CHIRP

# Copyright 2016:

# * Jim Unroe KC9HI, <rock.unroe@gmail.com>

#

# This program is free software: you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation, either version 2 of the License, or

# (at your option) any later version.

#

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

# GNU General Public License for more details.

#

# You should have received a copy of the GNU General Public License

# along with this program. If not, see <http://www.gnu.org/licenses/>.

import time

import struct

import logging

import re

LOG = logging.getLogger(__name__)

from chirp.drivers import baofeng_common

from chirp import chirp_common, directory, memmap

from chirp import bitwise, errors, util

from chirp.settings import RadioSettingGroup, RadioSetting, \

RadioSettingValueBoolean, RadioSettingValueList, \

RadioSettingValueString, RadioSettingValueInteger, \

RadioSettingValueFloat, RadioSettings, \

InvalidValueError

from textwrap import dedent

##### MAGICS #########################################################

# Baofeng UV-6R magic string

MSTRING_UV6R = "\x50\xBB\xFF\x20\x14\x11\x22"

##### ID strings #####################################################

# Baofeng UV-6R

UV6R_fp1 = " BF230#1"

UV6R_fp2 = " BF230#2"

DTMF_CHARS = "0123456789 *#ABCD"

STEPS = [2.5, 5.0, 6.25, 10.0, 12.5, 20.0, 25.0, 50.0]

LIST_AB = ["A", "B"]

LIST_ALMOD = ["Site", "Tone", "Code"]

LIST_BANDWIDTH = ["Wide", "Narrow"]

LIST_COLOR = ["Off", "Blue", "Orange", "Purple"]

LIST_DTMFSPEED = ["%s ms" % x for x in range(50, 2010, 10)]

LIST_DTMFST = ["Off", "DT-ST", "ANI-ST", "DT+ANI"]

LIST_MODE = ["Channel", "Name", "Frequency"]

LIST_OFF1TO9 = ["Off"] + list("123456789")

LIST_OFF1TO10 = LIST_OFF1TO9 + ["10"]

LIST_OFFAB = ["Off"] + LIST_AB

LIST_RESUME = ["TO", "CO", "SE"]

LIST_PONMSG = ["Full", "Message"]

LIST_PTTID = ["Off", "BOT", "EOT", "Both"]

LIST_SCODE = ["%s" % x for x in range(1, 16)]

LIST_RPSTE = ["Off"] + ["%s" % x for x in range(1, 11)]

LIST_SAVE = ["Off", "1:1", "1:2", "1:3", "1:4"]

LIST_SHIFTD = ["Off", "+", "-"]

LIST_STEDELAY = ["Off"] + ["%s ms" % x for x in range(100, 1100, 100)]

LIST_STEP = [str(x) for x in STEPS]

LIST_TCALL = ["Off", "1000 Hz", "1450 Hz", "1750 Hz", "2100 Hz"]

LIST_TIMEOUT = ["%s sec" % x for x in range(15, 615, 15)]

LIST_TXPOWER = ["High", "Low"]

LIST_VOICE = ["Off", "English", "Chinese"]

LIST_WORKMODE = ["Frequency", "Channel"]

def model_match(cls, data):

"""Match the opened/downloaded image to the correct version"""

match_rid1 = False

match_rid2 = False

rid1 = data[0x1FF8:0x2000]

if rid1 in cls._fileid:

match_rid1 = True

rid2 = data[0x1FD0:0x1FD5]

if rid2 == cls.MODEL:

match_rid2 = True

if match_rid1 and match_rid2:

return True

else:

return False

@directory.register

class UV6R(baofeng_common.BaofengCommonHT):

"""Baofeng UV-6R"""

VENDOR = "Baofeng"

MODEL = "UV-6R"

_fileid = [UV6R_fp2, UV6R_fp1, ]

_magic = [MSTRING_UV6R, ]

_magic_response_length = 8

_fw_ver_start = 0x1FF0

_recv_block_size = 0x40

_mem_size = 0x2000

_ack_block = False

_ranges = [(0x0000, 0x1800),

(0x1F40, 0x1F50),

(0x1FC0, 0x1FD0),

(0x1FE0, 0x1FF0)]

_send_block_size = 0x10

MODES = ["FM", "NFM"]

VALID_CHARS = chirp_common.CHARSET_ALPHANUMERIC + \

"!@#$%^&*()+-=[]:\";'<>?,./"

LENGTH_NAME = 6

SKIP_VALUES = ["", "S"]

DTCS_CODES = sorted(chirp_common.DTCS_CODES + [645])

POWER_LEVELS = [chirp_common.PowerLevel("High", watts=5.00),

chirp_common.PowerLevel("Low", watts=1.00)]

VALID_BANDS = [(136000000, 174000000),

(400000000, 520000000)]

PTTID_LIST = LIST_PTTID

SCODE_LIST = LIST_SCODE

MEM_FORMAT = """

#seekto 0x0000;

struct {

lbcd rxfreq[4];

lbcd txfreq[4];

ul16 rxtone;

ul16 txtone;

u8 unknown0:4,

scode:4;

u8 unknown1;

u8 unknown2:7,

lowpower:1;

u8 unknown3:1,

wide:1,

unknown4:2,

bcl:1,

scan:1,

pttid:2;

} memory[128];

#seekto 0x0B00;

struct {

u8 code[5];

u8 unused[11];

} pttid[15];

#seekto 0x0CAA;

struct {

u8 code[5];

u8 unused:6,

aniid:2;

u8 unknown[2];

u8 dtmfon;

u8 dtmfoff;

} ani;

#seekto 0x0E20;

struct {

u8 unused00:4,

squelch:4;

u8 unused01:5,

step:3;

u8 unknown00;

u8 unused02:5,

save:3;

u8 unused03:4,

vox:4;

u8 unknown01;

u8 unused04:4,

abr:4;

u8 unused05:7,

tdr:1;

u8 unused06:7,

beep:1;

u8 unused07:2,

timeout:6;

u8 unused08:6,

tcall:2;

u8 unknown02[3];

u8 unused09:6,

voice:2;

u8 unknown03;

u8 unused10:6,

dtmfst:2;

u8 unknown04;

u8 unused11:6,

screv:2;

u8 unused12:6,

pttid:2;

u8 unused13:2,

pttlt:6;

u8 unused14:6,

mdfa:2;

u8 unused15:6,

mdfb:2;

u8 unknown05;

u8 unused16:7,

autolk:1;

u8 unknown06[4];

u8 unused17:6,

wtled:2;

u8 unused18:6,

rxled:2;

u8 unused19:6,

txled:2;

u8 unused20:6,

almod:2;

u8 unknown07[2];

u8 unused22:7,

ste:1;

u8 unused23:4,

rpste:4;

u8 unused24:4,

rptrl:4;

u8 unused25:7,

ponmsg:1;

u8 unused26:7,

roger:1;

u8 unused27:7,

reset:1;

u8 unknown08;

u8 displayab:1,

unknown09:2,

fmradio:1,

alarm:1,

unknown10:1,

reset:1,

menu:1;

u8 unknown11;

u8 unused29:7,

workmode:1;

u8 unused30:7,

keylock:1;

u8 cht;

} settings;

#seekto 0x0E76;

struct {

u8 unused0:1,

mrcha:7;

u8 unused1:1,

mrchb:7;

} wmchannel;

struct vfo {

u8 unknown0[8];

u8 freq[8];

u8 offset[6];

ul16 rxtone;

ul16 txtone;

u8 unused0:7,

band:1;

u8 unknown3;

u8 unknown4:2,

sftd:2,

scode:4;

u8 unknown5;

u8 unknown6:1,

step:3,

unknown7:4;

u8 txpower:1,

widenarr:1,

unknown8:6;

};

#seekto 0x0F00;

struct {

struct vfo a;

struct vfo b;

} vfo;

#seekto 0x0F4E;

u16 fm_presets;

#seekto 0x1000;

struct {

char name[6];

u8 unknown[10];

} names[128];

#seekto 0x1F40;

struct {

u8 sql0;

u8 sql1;

u8 sql2;

u8 sql3;

u8 sql4;

u8 sql5;

u8 sql6;

u8 sql7;

u8 sql8;

u8 sql9;

} squelch;

struct limit {

u8 enable;

bbcd lower[2];

bbcd upper[2];

};

#seekto 0x1FC0;

struct {

struct limit vhf;

struct limit uhf;

} limits;

#seekto 0x1FD0;

struct {

char line1[8];

char line2[8];

} sixpoweron_msg;

#seekto 0x1FE0;

struct {

char line1[7];

char line2[7];

} poweron_msg;

#seekto 0x1FF0;

struct {

char line1[8];

char line2[8];

} firmware_msg;

"""

@classmethod

def get_prompts(cls):

rp = chirp_common.RadioPrompts()

rp.experimental = \

('The BTech UV-6R driver is a beta version.\n'

'\n'

'Please save an unedited copy of your first successful\n'

'download to a CHIRP Radio Images(*.img) file.'

)

rp.pre_download = _(dedent("""\

Follow these instructions to download your info:

1 - Turn off your radio

2 - Connect your interface cable

3 - Turn on your radio

4 - Do the download of your radio data

"""))

rp.pre_upload = _(dedent("""\

Follow this instructions to upload your info:

1 - Turn off your radio

2 - Connect your interface cable

3 - Turn on your radio

4 - Do the upload of your radio data

"""))

return rp

def process_mmap(self):

"""Process the mem map into the mem object"""

self._memobj = bitwise.parse(self.MEM_FORMAT, self._mmap)

def get_settings(self):

"""Translate the bit in the mem_struct into settings in the UI"""

_mem = self._memobj

basic = RadioSettingGroup("basic", "Basic Settings")

advanced = RadioSettingGroup("advanced", "Advanced Settings")

other = RadioSettingGroup("other", "Other Settings")

work = RadioSettingGroup("work", "Work Mode Settings")

fm_preset = RadioSettingGroup("fm_preset", "FM Preset")

dtmfe = RadioSettingGroup("dtmfe", "DTMF Encode Settings")

service = RadioSettingGroup("service", "Service Settings")

top = RadioSettings(basic, advanced, other, work, fm_preset, dtmfe,

service)

# Basic settings

if _mem.settings.squelch > 0x09:

val = 0x00

else:

val = _mem.settings.squelch

rs = RadioSetting("settings.squelch", "Squelch",

RadioSettingValueList(

LIST_OFF1TO9, LIST_OFF1TO9[val]))

basic.append(rs)

if _mem.settings.save > 0x04:

val = 0x00

else:

val = _mem.settings.save

rs = RadioSetting("settings.save", "Battery Saver",

RadioSettingValueList(

LIST_SAVE, LIST_SAVE[val]))

basic.append(rs)

if _mem.settings.vox > 0x0A:

val = 0x00

else:

val = _mem.settings.vox

rs = RadioSetting("settings.vox", "Vox",

RadioSettingValueList(

LIST_OFF1TO10, LIST_OFF1TO10[val]))

basic.append(rs)

if _mem.settings.abr > 0x0A:

val = 0x00

else:

val = _mem.settings.abr

rs = RadioSetting("settings.abr", "Backlight Timeout",

RadioSettingValueList(

LIST_OFF1TO10, LIST_OFF1TO10[val]))

basic.append(rs)

rs = RadioSetting("settings.tdr", "Dual Watch",

RadioSettingValueBoolean(_mem.settings.tdr))

basic.append(rs)

rs = RadioSetting("settings.beep", "Beep",

RadioSettingValueBoolean(_mem.settings.beep))

basic.append(rs)

if _mem.settings.timeout > 0x27:

val = 0x03

else:

val = _mem.settings.timeout

rs = RadioSetting("settings.timeout", "Timeout Timer",

RadioSettingValueList(

LIST_TIMEOUT, LIST_TIMEOUT[val]))

basic.append(rs)

if _mem.settings.voice > 0x02:

val = 0x01

else:

val = _mem.settings.voice

rs = RadioSetting("settings.voice", "Voice Prompt",

RadioSettingValueList(

LIST_VOICE, LIST_VOICE[val]))

basic.append(rs)

rs = RadioSetting("settings.dtmfst", "DTMF Sidetone",

RadioSettingValueList(LIST_DTMFST, LIST_DTMFST[

_mem.settings.dtmfst]))

basic.append(rs)

if _mem.settings.screv > 0x02:

val = 0x01

else:

val = _mem.settings.screv

rs = RadioSetting("settings.screv", "Scan Resume",

RadioSettingValueList(

LIST_RESUME, LIST_RESUME[val]))

basic.append(rs)

rs = RadioSetting("settings.pttid", "When to send PTT ID",

RadioSettingValueList(LIST_PTTID, LIST_PTTID[

_mem.settings.pttid]))

basic.append(rs)

if _mem.settings.pttlt > 0x1E:

val = 0x05

else:

val = _mem.settings.pttlt

rs = RadioSetting("pttlt", "PTT ID Delay",

RadioSettingValueInteger(0, 50, val))

basic.append(rs)

rs = RadioSetting("settings.mdfa", "Display Mode (A)",

RadioSettingValueList(LIST_MODE, LIST_MODE[

_mem.settings.mdfa]))

basic.append(rs)

rs = RadioSetting("settings.mdfb", "Display Mode (B)",

RadioSettingValueList(LIST_MODE, LIST_MODE[

_mem.settings.mdfb]))

basic.append(rs)

rs = RadioSetting("settings.autolk", "Auto Lock Keypad",

RadioSettingValueBoolean(_mem.settings.autolk))

basic.append(rs)

rs = RadioSetting("settings.wtled", "Standby LED Color",

RadioSettingValueList(

LIST_COLOR, LIST_COLOR[_mem.settings.wtled]))

basic.append(rs)

rs = RadioSetting("settings.rxled", "RX LED Color",

RadioSettingValueList(

LIST_COLOR, LIST_COLOR[_mem.settings.rxled]))

basic.append(rs)

rs = RadioSetting("settings.txled", "TX LED Color",

RadioSettingValueList(

LIST_COLOR, LIST_COLOR[_mem.settings.txled]))

basic.append(rs)

if _mem.settings.almod > 0x02:

val = 0x00

else:

val = _mem.settings.almod

rs = RadioSetting("settings.almod", "Alarm Mode",

RadioSettingValueList(

LIST_ALMOD, LIST_ALMOD[val]))

basic.append(rs)

if _mem.settings.tcall > 0x05:

val = 0x00

else:

val = _mem.settings.tcall

rs = RadioSetting("settings.tcall", "Tone Burst Frequency",

RadioSettingValueList(

LIST_TCALL, LIST_TCALL[val]))

basic.append(rs)

rs = RadioSetting("settings.ste", "Squelch Tail Eliminate (HT to HT)",

RadioSettingValueBoolean(_mem.settings.ste))

basic.append(rs)

if _mem.settings.rpste > 0x0A:

val = 0x00

else:

val = _mem.settings.rpste

rs = RadioSetting("settings.rpste",

"Squelch Tail Eliminate (repeater)",

RadioSettingValueList(

LIST_RPSTE, LIST_RPSTE[val]))

basic.append(rs)

if _mem.settings.rptrl > 0x0A:

val = 0x00

else:

val = _mem.settings.rptrl

rs = RadioSetting("settings.rptrl", "STE Repeater Delay",

RadioSettingValueList(

LIST_STEDELAY, LIST_STEDELAY[val]))

basic.append(rs)

rs = RadioSetting("settings.ponmsg", "Power-On Message",

RadioSettingValueList(LIST_PONMSG, LIST_PONMSG[

_mem.settings.ponmsg]))

basic.append(rs)

rs = RadioSetting("settings.roger", "Roger Beep",

RadioSettingValueBoolean(_mem.settings.roger))

basic.append(rs)

# Advanced settings

rs = RadioSetting("settings.reset", "RESET Menu",

RadioSettingValueBoolean(_mem.settings.reset))

advanced.append(rs)

rs = RadioSetting("settings.menu", "All Menus",

RadioSettingValueBoolean(_mem.settings.menu))

advanced.append(rs)

rs = RadioSetting("settings.fmradio", "Broadcast FM Radio",

RadioSettingValueBoolean(_mem.settings.fmradio))

advanced.append(rs)

rs = RadioSetting("settings.alarm", "Alarm Sound",

RadioSettingValueBoolean(_mem.settings.alarm))

advanced.append(rs)

# Other settings

def _filter(name):

filtered = ""

for char in str(name):

if char in chirp_common.CHARSET_ASCII:

filtered += char

else:

filtered += " "

return filtered

_msg = _mem.firmware_msg

val = RadioSettingValueString(0, 8, _filter(_msg.line1))

val.set_mutable(False)

rs = RadioSetting("firmware_msg.line1", "Firmware Message 1", val)

other.append(rs)

val = RadioSettingValueString(0, 8, _filter(_msg.line2))

val.set_mutable(False)

rs = RadioSetting("firmware_msg.line2", "Firmware Message 2", val)

other.append(rs)

_msg = _mem.sixpoweron_msg

val = RadioSettingValueString(0, 8, _filter(_msg.line1))

val.set_mutable(False)

rs = RadioSetting("sixpoweron_msg.line1", "6+Power-On Message 1", val)

other.append(rs)

val = RadioSettingValueString(0, 8, _filter(_msg.line2))

val.set_mutable(False)

rs = RadioSetting("sixpoweron_msg.line2", "6+Power-On Message 2", val)

other.append(rs)

_msg = _mem.poweron_msg

rs = RadioSetting("poweron_msg.line1", "Power-On Message 1",

RadioSettingValueString(

0, 7, _filter(_msg.line1)))

other.append(rs)

rs = RadioSetting("poweron_msg.line2", "Power-On Message 2",

RadioSettingValueString(

0, 7, _filter(_msg.line2)))

other.append(rs)

lower = 136

upper = 174

rs = RadioSetting("limits.vhf.lower", "VHF Lower Limit (MHz)",

RadioSettingValueInteger(

lower, upper, _mem.limits.vhf.lower))

other.append(rs)

rs = RadioSetting("limits.vhf.upper", "VHF Upper Limit (MHz)",

RadioSettingValueInteger(

lower, upper, _mem.limits.vhf.upper))

other.append(rs)

lower = 400

upper = 520

rs = RadioSetting("limits.uhf.lower", "UHF Lower Limit (MHz)",

RadioSettingValueInteger(

lower, upper, _mem.limits.uhf.lower))

other.append(rs)

rs = RadioSetting("limits.uhf.upper", "UHF Upper Limit (MHz)",

RadioSettingValueInteger(

lower, upper, _mem.limits.uhf.upper))

other.append(rs)

# Work mode settings

rs = RadioSetting("settings.displayab", "Display",

RadioSettingValueList(

LIST_AB, LIST_AB[_mem.settings.displayab]))

work.append(rs)

rs = RadioSetting("settings.workmode", "VFO/MR Mode",

RadioSettingValueList(

LIST_WORKMODE,

LIST_WORKMODE[_mem.settings.workmode]))

work.append(rs)

rs = RadioSetting("settings.keylock", "Keypad Lock",

RadioSettingValueBoolean(_mem.settings.keylock))

work.append(rs)

rs = RadioSetting("wmchannel.mrcha", "MR A Channel",

RadioSettingValueInteger(0, 127,

_mem.wmchannel.mrcha))

work.append(rs)

rs = RadioSetting("wmchannel.mrchb", "MR B Channel",

RadioSettingValueInteger(0, 127,

_mem.wmchannel.mrchb))

work.append(rs)

def convert_bytes_to_freq(bytes):

real_freq = 0

for byte in bytes:

real_freq = (real_freq * 10) + byte

return chirp_common.format_freq(real_freq * 10)

def my_validate(value):

_vhf_lower = int(_mem.limits.vhf.lower)

_vhf_upper = int(_mem.limits.vhf.upper)

_uhf_lower = int(_mem.limits.uhf.lower)

_uhf_upper = int(_mem.limits.uhf.upper)

value = chirp_common.parse_freq(value)

msg = ("Can't be less than %i.0000")

if value > 99000000 and value < _vhf_lower * 1000000:

raise InvalidValueError(msg % _vhf_lower)

msg = ("Can't be between %i.9975-%i.0000")

if _vhf_upper * 1000000 <= value and value < _uhf_lower * 1000000:

raise InvalidValueError(msg % (_vhf_upper - 1, _uhf_lower))

msg = ("Can't be greater than %i.9975")

if value > 99000000 and value >= _uhf_upper * 1000000:

raise InvalidValueError(msg % (_uhf_upper - 1))

return chirp_common.format_freq(value)

def apply_freq(setting, obj):

value = chirp_common.parse_freq(str(setting.value)) / 10

for i in range(7, -1, -1):

obj.freq[i] = value % 10

value /= 10

val1a = RadioSettingValueString(0, 10,

convert_bytes_to_freq(_mem.vfo.a.freq))

val1a.set_validate_callback(my_validate)

rs = RadioSetting("vfo.a.freq", "VFO A Frequency", val1a)

rs.set_apply_callback(apply_freq, _mem.vfo.a)

work.append(rs)

val1b = RadioSettingValueString(0, 10,

convert_bytes_to_freq(_mem.vfo.b.freq))

val1b.set_validate_callback(my_validate)

rs = RadioSetting("vfo.b.freq", "VFO B Frequency", val1b)

rs.set_apply_callback(apply_freq, _mem.vfo.b)

work.append(rs)

rs = RadioSetting("vfo.a.sftd", "VFO A Shift",

RadioSettingValueList(

LIST_SHIFTD, LIST_SHIFTD[_mem.vfo.a.sftd]))

work.append(rs)

rs = RadioSetting("vfo.b.sftd", "VFO B Shift",

RadioSettingValueList(

LIST_SHIFTD, LIST_SHIFTD[_mem.vfo.b.sftd]))

work.append(rs)

def convert_bytes_to_offset(bytes):

real_offset = 0

for byte in bytes:

real_offset = (real_offset * 10) + byte

return chirp_common.format_freq(real_offset * 1000)

def apply_offset(setting, obj):

value = chirp_common.parse_freq(str(setting.value)) / 1000

for i in range(5, -1, -1):

obj.offset[i] = value % 10

value /= 10

val1a = RadioSettingValueString(

0, 10, convert_bytes_to_offset(_mem.vfo.a.offset))

rs = RadioSetting("vfo.a.offset",

"VFO A Offset", val1a)

rs.set_apply_callback(apply_offset, _mem.vfo.a)

work.append(rs)

val1b = RadioSettingValueString(

0, 10, convert_bytes_to_offset(_mem.vfo.b.offset))

rs = RadioSetting("vfo.b.offset",

"VFO B Offset", val1b)

rs.set_apply_callback(apply_offset, _mem.vfo.b)

work.append(rs)

rs = RadioSetting("vfo.a.txpower", "VFO A Power",

RadioSettingValueList(

LIST_TXPOWER,

LIST_TXPOWER[_mem.vfo.a.txpower]))

work.append(rs)

rs = RadioSetting("vfo.b.txpower", "VFO B Power",

RadioSettingValueList(

LIST_TXPOWER,

LIST_TXPOWER[_mem.vfo.b.txpower]))

work.append(rs)

rs = RadioSetting("vfo.a.widenarr", "VFO A Bandwidth",

RadioSettingValueList(

LIST_BANDWIDTH,

LIST_BANDWIDTH[_mem.vfo.a.widenarr]))

work.append(rs)

rs = RadioSetting("vfo.b.widenarr", "VFO B Bandwidth",

RadioSettingValueList(

LIST_BANDWIDTH,

LIST_BANDWIDTH[_mem.vfo.b.widenarr]))

work.append(rs)

rs = RadioSetting("vfo.a.scode", "VFO A S-CODE",

RadioSettingValueList(

LIST_SCODE,

LIST_SCODE[_mem.vfo.a.scode]))

work.append(rs)

rs = RadioSetting("vfo.b.scode", "VFO B S-CODE",

RadioSettingValueList(

LIST_SCODE,

LIST_SCODE[_mem.vfo.b.scode]))

work.append(rs)

rs = RadioSetting("vfo.a.step", "VFO A Tuning Step",

RadioSettingValueList(

LIST_STEP, LIST_STEP[_mem.vfo.a.step]))

work.append(rs)

rs = RadioSetting("vfo.b.step", "VFO B Tuning Step",

RadioSettingValueList(

LIST_STEP, LIST_STEP[_mem.vfo.b.step]))

work.append(rs)

# broadcast FM settings

_fm_presets = self._memobj.fm_presets

if _fm_presets <= 108.0 * 10 - 650:

preset = _fm_presets / 10.0 + 65

elif _fm_presets >= 65.0 * 10 and _fm_presets <= 108.0 * 10:

preset = _fm_presets / 10.0

else:

preset = 76.0

rs = RadioSetting("fm_presets", "FM Preset(MHz)",

RadioSettingValueFloat(65, 108.0, preset, 0.1, 1))

fm_preset.append(rs)

# DTMF settings

def apply_code(setting, obj, length):

code = []

for j in range(0, length):

try:

code.append(DTMF_CHARS.index(str(setting.value)[j]))

except IndexError:

code.append(0xFF)

obj.code = code

for i in range(0, 15):

_codeobj = self._memobj.pttid[i].code

_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])

val = RadioSettingValueString(0, 5, _code, False)

val.set_charset(DTMF_CHARS)

pttid = RadioSetting("pttid/%i.code" % i,

"Signal Code %i" % (i + 1), val)

pttid.set_apply_callback(apply_code, self._memobj.pttid[i], 5)

dtmfe.append(pttid)

if _mem.ani.dtmfon > 0xC3:

val = 0x03

else:

val = _mem.ani.dtmfon

rs = RadioSetting("ani.dtmfon", "DTMF Speed (on)",