Project

General

Profile

Actions

Bug #10147

open

ft-60r PTT delay

Added by CLAY NEITZ almost 2 years ago. Updated almost 2 years ago.

Status:
New
Priority:
Normal
Assignee:
-
Category:
-
Target version:
Start date:
11/30/2022
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
Yaesu FT-60r
Platform:
Windows
Debug Log:
I read the instructions above:

Description

Radio model Yaesu FT-60r
With MARS/CAP mod

After uploading to radio when I'm on a frequency and press to talk, there is a large delay followed by a beep before speech will transmit.

This did not happen before when manually adding frequencies. But It did happen if I entered more than 6 digits on the ft60.
So I erased the memory and put them in myself, manually with 6 digits as before.. the delay remained, so I reset ALL and manually entered and no delay.

I reset ALL and uploaded from chirp and the delay was back.

I think the beep after the PTT might be a time out beep.

There is no way to just have 6 digits on chirp.. it automatically adds the extra digits.

I don't know if it is the 6 digit thing, but it was the one thing that I thought to try. It could be something else too as just a memory reset with 6 digit manual entry did not fix the large delay issue.

I'm trying to remember how long the delay was, maybe 5 to 10 seconds, estimated from what I remember.

The delay was sizable enough to make using with the chirp upload not usable for normal communication.


Files

Yaesu_FT-60_20221130-1.img (28.1 KB) Yaesu_FT-60_20221130-1.img CLAY NEITZ, 11/30/2022 02:23 PM
Actions #1

Updated by CLAY NEITZ almost 2 years ago

I forgot to mention that I tried this both with MX-Linux and Windows 10

Actions

Also available in: Atom PDF