Project

General

Profile

Actions

Bug #2047

closed

Upgrade to Yosemite and driver is not found

Added by Ron Earl almost 10 years ago. Updated almost 10 years ago.

Status:
Rejected
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
11/12/2014
Due date:
% Done:

0%

Estimated time:
Chirp Version:
0.4.0
Model affected:
(All models)
Platform:
MacOS
Debug Log:
I read the instructions above:

Description

After upgrading, when I try to download from the radio I get "could not open port /dev/cu.PL2303-00004014: [Errno 2] No such file or directory: '/dev/cu.PL2303-00004014'." Same for my Yaesu VX-6 and Baofeng UV-82. Both had programmed fine previously. I reinstalled the driver software (for the clone chip, which is what i was using for both radios), and got the same thing.

The driver shows up in the pulldown menu after opening chirp, but if I try another listed driver in the pull down menu and then try to go back the driver disappears until I restart Chirp. I tried both 0.4.0 sf 0.4.1.

Here is what the Terminal gives me: Ron-EarlsMini:~ ronearl$ ls /dev/cu*
/dev/cu.Bluetooth-Incoming-Port /dev/cu.SLAB_USBtoUART
/dev/cu.Bluetooth-Modem /dev/cu.SLAB_USBtoUART1
/dev/cu.RonsiPodtouch-Wirelessi
Ron-EarlsMini:~ ronearl$

Don' see it listed there.

Actions #1

Updated by Tom Hayward almost 10 years ago

  • Status changed from New to Rejected

Driver issues are independent from Chirp. There's nothing we can do about it. You'll have to take this up with the author of the driver / manufacturer of the cable.

Actions

Also available in: Atom PDF