Project

General

Profile

Actions

Bug #4255

open

Bank Corruption During Copying or Import of Data

Added by James Carey almost 8 years ago. Updated almost 8 years ago.

Status:
New
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
11/22/2016
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
(All models)
Platform:
Windows
Debug Log:
I read the instructions above:

Description

This issue appears to effect Chirp while working with Yaesu 7800R and 7900R img files.

The Bank memorys on the Bank tab become corrupted while opening an existing configure file of another type and copying channels from another tab. Channels in Banks are automatically and randomly checked when data is copied even if the original configuration file only contains one memory Bank.

Channels are randomly selected on all 20 Banks and no error is displayed. Possible causes might be an application memory leak or corruption in a temporary data storage array.


Related issues 1 (1 open0 closed)

Related to Bug #1965: Yaesu FT-8800R Right Side Memory Banks Not ProgrammingFeedback10/14/2014

Actions
Actions #1

Updated by Peter Susan almost 8 years ago

I have a quite same issue on my Yaesu FT-8800R. I've uploaded my configuration to the radio, but the right banks are not updated. If I download it from it to a blank document, the memories are fine. The memory banks are containing the same data. If I modify the data bank assignments on either side and upload it to the radio still not working, but after I download it again, the two memory banks become the same somehow in CHIRP. Sometimes the synchronization gives me ERROR, but after a retry, it goes well.

If I assign channels to memory banks in the radio, it works fine, but on the right side, it won't synchronize with CHIRP, if I download the right bank memory settings made on the radio, it does not appear in CHIRP.

I tried to factory reset and re-upload it, but no luck.

Thanks!

Actions

Also available in: Atom PDF