New Model #4923
openZastone ZT-A19
0%
Description
Is it possible to include Zastone ZT-A19 (or just A19 im not sure), seems to be the same model as the Yanton T-650UV, maybe also more variations, but have not been able to find software for either models, hope it can be included in future updates.
Files
Updated by William Christensen almost 7 years ago
- File Radio_Setup.exe Radio_Setup.exe added
- File T-650UV_Setup.exe T-650UV_Setup.exe added
I can get it working some when I use Wouxun KG-UV8D, but get error for every 5 channels (5 working 5 not working and so on).
This radio also known as LSENG T-650UV and Yanton T-650UV.
Have included software from manufacturer, nor working for me, so hope these radioes will be supported by CHIRP.
Updated by William Christensen almost 7 years ago
If I use Wouxun KG-UV8D to write to the Zastone A19, it seems to be working fine, only reading channels from the Zastone A19 using Wouxun KG-UV8D, only every five row of channels is read/cloned (5 chanels working, 5 chanels not and so on).
Should be pretty easy implementing the A19/T650UV 10W 999Channels radios.
Updated by William Christensen almost 7 years ago
Maybe I have been a little to early claiming Wouxun KG-UV8D profile would work, it seems so a first, but Tone/DTCS is not uploaded to the A19 correctly, even though the frequency seems to upload just fine, so it is working somewhat but not 100%.
Updated by William Christensen almost 7 years ago
- File UV8D_SEN.rar UV8D_SEN.rar added
The software for Wouxun KG-UV8D from the manufacturer works fine with Zenstone A19, so think A19/T650UV is the same radio/hardware as Wouxun KG-UV8D, so should be easy to implement in CHIRP.
Updated by Fred Weiss about 6 years ago
I am also having problems with Tone and dtcs now writing correctly to a-19 or the 889 from zastone using the wouxun kguv8d, would be nice to have the 889 and a19 added to zastone.. Thanks