Actions
Bug #7191
closedChirp not allowing 2.5kHz step on Wouxun KG-UV6X
Status:
Closed
Priority:
High
Assignee:
-
Category:
-
Target version:
-
Start date:
10/29/2019
Due date:
% Done:
100%
Estimated time:
Chirp Version:
daily
Model affected:
KG-UV6X
Platform:
Windows
I read the instructions above:
Description
Somewhere in the past few months it appears that a bug was introduced into Chirp for the Wouxun KG-UV6X. It is no longer accepting 2.50kHz step frequency programming. When importing frequencies into a downloaded image the 2.50kHz are dropped. Attempting to manual enter a frequency gives the error:
Error setting memory: Tuning step 2.5 not support
Frequency requires 2.50kHz step
I have confirmed that the VFO A/B Frequency Steps are set to 2.5. This occurs when importing or manually entering into downloaded images from the newest shipped versions of the KG-UV6X as well as older previously programmed radios. This behavior is still present in the most recent daily.
Files
Updated by Anonymous almost 5 years ago
- Status changed from New to Closed
- % Done changed from 0 to 100
Applied in changeset commit:961a6c7df0fd.
Actions