Project

General

Profile

Actions

Bug #9619

open

BTECH GMRS-50X1 DTCS code programming

Added by Bill Blum almost 3 years ago.

Status:
New
Priority:
Normal
Assignee:
-
Category:
-
Target version:
Start date:
12/20/2021
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
GMRS 50X1
Platform:
Windows
Debug Log:
I read the instructions above:

Description

Attempting to set DTCS tones on two frequencies using CHIRP. DTCS can be activated, xmit frequency can be set. Attempts to set receive frequency always return frequency 023.
Attempted to program Rx-DTCS using the mic control panel on the 50X1. Set both frequencies, no problem. Checked radio and found DTCS was being encoded and transmitted and receiver was decoding and opening the speaker as expected. Started CHIRP fresh and downloaded radio to CHIRP. The two frequncies of interest showed 023 on the rxc-dtcs cells. Uploaded CHIRP file to radio. Found the two frequencies unchanged from manual programming.
Version of CHIRP is: daily-20211216.

Have not encountered this issue on any of the other radios we superivse including: Baofeng / radioddity UV-5 x, r and g, and Radioddity DG-20G.

No data to display

Actions

Also available in: Atom PDF