BaofengUV5R » History » Revision 4
Revision 3 (John LaMartina, 06/20/2016 02:47 PM) → Revision 4/31 (John LaMartina, 06/20/2016 02:51 PM)
{{toc}}
h1. BaofengUV5R
This page provides general tips and troubleshooting for the Baofeng UV-5R and related radios. The UV-5R is the base model for a lot of variants, so this page will apply to many more people than just those with that specific badge on their radio. This information is a summarized version of the Miklor page on the subject. Go there for "more detailed information":http://www.miklor.com/COM/UV_ErrorMess.php
h2. Common Errors
h3. Radio Did Not Respond
This is a very common problem. Slightly offset audio jacks could be the problem. Make sure the connector is snapped in all the way. Some cables require a really hard push to snap in that last 1/16 inch. One indication is that the transmitter may be keyed. A slight trimming of the cable's plug side and edge may be required.
h3. Driver Issues
Many of This is a very common problem. Slightly offset audio jacks could be the inexpensive programming problem. Make sure the connector is snapped in all the way. Some cables are not the bargain they appear. Due require a really hard push to Prolific USB/Serial chip 'clones' found snap in generic USB programming cables, an older driver that last 1/16 inch. One indication is required in lieu that the transmitter may be keyed. A slight trimming of the driver now automatically supplied by Windows. for "more detailed information, refer to ":http://http://www.miklor.com/COM/UV_Drivers.php cable's plug side and edge may be required.