Project

General

Profile

MacOS Tips » History » Version 12

Tom Hayward, 03/26/2014 10:05 AM

1 11 Tom Hayward
h1.  Mac USB Drivers 
2 1 Dan Smith
3 11 Tom Hayward
h2.  FTDI cables
4 6 Dave Nathanson
5 1 Dan Smith
http://www.ftdichip.com/Drivers/VCP.htm
6 6 Dave Nathanson
Version 1.5.1 is available for Mac OS X on 64 bit, 32 bit and PPC machines. 
7
8 11 Tom Hayward
h2. Prolific PL-2303 cables - official drivers for the genuine Prolific cables
9
10 6 Dave Nathanson
http://www.prolific.com.tw/US/CustomerLogin.aspx 
11
Login as guest/ guest & look in the Support section. Specified to work with Mac OSX 10.6, 10.7, & 10.8. 
12 1 Dan Smith
13 11 Tom Hayward
h2. Generic PL-2303 cables (counterfeit and/or “Generic”)
14
15 1 Dan Smith
For Lion (10.7.x) and Mountain Lion (10.8.x):
16
http://changux.co/osx-installer-to-pl2303-serial-usb-on-osx-lio/
17 11 Tom Hayward
18 9 Dave Nathanson
For earlier versions of Mac OS X up to 10.5 Leopard. Also some reports of success with Snow Leopard, Lion:
19 1 Dan Smith
http://sourceforge.net/projects/osx-pl2303/
20
21 11 Tom Hayward
h2. RTSystems cables
22
23 1 Dan Smith
https://www.rtsystemsinc.com/kb_results.asp?ID=9
24
http://www.rtsystems.us/downloads/MacDrivers/RTSystemUSBSerialDrivers.pkg.mpkg.zip
25
26 11 Tom Hayward
h2. Silicon Labs CP210x USB to UART Bridge VCP Drivers (including Kenwood TH-D72)
27
28 12 Tom Hayward
* http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx
29
Macintosh OSX driver for the Intel and PowerPC Platforms versions 10.4, 10.5, 10.6, 10.7, 10.8, and 10.9.
30 1 Dan Smith
31 11 Tom Hayward
h1. Tips
32 1 Dan Smith
33 11 Tom Hayward
* In many cases you need to connect the cable to the radio first, then power the radio on, while holding down some buttons. The exact procedure varies by radio.
34
* Some radios need to be put into a "clone" mode to transfer to PC, some radios may need to be configured to use the mic/speaker jacks for PC transfer instead of for the speaker/mic. The exact procedure varies by radio. 
35
* You will need to download from the radio to CHIRP first, before uploading anything to the radio. CHIRP creates a template from the radio download so it knows how to talk to the radio. 
36
* If you want to download from one radio and upload those settings to another radio, first download from each radio to a separate “tab” of CHIRP. Then copy/paste from one tab to the other & upload back to the same radio that produced that tab. Do not try to upload to a radio directly from a tab that was not downloaded from that same radio. 
37
* Many USB to serial cables include a counterfeit Prolific chip. This can cause connection problems because the official Prolific driver will ignore the counterfeit chip. Some people have reported success by using an older version of the Prolific driver, or a 3rd party driver. 
38
* If you are using multiple USB cables, each will create a different “virtual port”, meaning that you will need to select the correct virtual port for your radio when connecting to your radio. CHIRP will give you this opportunity each time you download from the radio. 
39
* If CHIRP won’t launch & won't run, you may have neglected to install the Python runtime. CHIRP needs that. Even though Mac OS X includes Python built-in, the runtime has to be installed is because it includes PyGTK and some other libraries that Chirp requires, in addition to Python itself: http://www.d-rats.com/download/OSX_Runtime/
40
* If your radio is not "Supported", you can try downloading the newest Daily Build to see if support was recently added.
41 1 Dan Smith
42 11 Tom Hayward
h1. Troubleshooting
43 8 Dave Nathanson
44 11 Tom Hayward
You can verify that the drivers are installed & working by connecting the USB cable to your Mac, then running “System Profiler”, or “System Information” (found in  /Applications/Utilities ). When the USB cable is connected and drivers correctly installed, the cable will show up in the USB section of the System Profiler. 
45 6 Dave Nathanson
46 11 Tom Hayward
Another way to see that the driver is correctly installed is to open Terminal and type:
47 6 Dave Nathanson
48 11 Tom Hayward
    ls /dev/cu*
49 6 Dave Nathanson
50 11 Tom Hayward
It will return a list of virtual serial ports including something similar to:
51 6 Dave Nathanson
52 11 Tom Hayward
    /dev/cu.usbserial-A501XQ5I     (suffix will vary)
53 6 Dave Nathanson
54 11 Tom Hayward
You may also type:
55 6 Dave Nathanson
56 11 Tom Hayward
    kextstat
57 6 Dave Nathanson
58
That will return a long list of kexts, including something similar to this at the bottom (most recently installed are listed last):
59
60 11 Tom Hayward
    142    0 0xffffff7f81fc8000 0x8000      0x8000     com.FTDI.driver.FTDIUSBSerialDriver (2.2.18) <112 32 5 4 3 1>
61
62 6 Dave Nathanson
Look at the CHIRP log for clues.
63
64 11 Tom Hayward
    ~/.chirp/debug.log
65
66 6 Dave Nathanson
Join the Mailing list & search the archives for similar problem reports & how they were resolved, and/or ask the group. Please include enough info about the problem and situation so the community will be able to help you. 
67
68 1 Dan Smith
Not all functionality is supported on all radios. See "Model Support":http://chirp.danplanet.com/download/0.3.0/Model_Support.html
69
70 11 Tom Hayward
h2. CHIRP Beginners Guide
71
72
[[Beginners Guide]]