CHIRP

01/12/2017

11:47 AM CHIRP Feature #4381: Character set: single/double width

I have found a solution to use here the Alinco software and also CHIRP with 57600bps (create a virtual COM port with ... Klaus Noack

01/09/2017

07:21 AM CHIRP Bug #4355: Failed to read from Alinco DJ-G7

FYI: I tried only reading up to now due to #4381. Klaus Noack

07:13 AM CHIRP Bug #4355: Failed to read from Alinco DJ-G7

Is working here as specified!
The 19200 was my first try (the middle of 57600 and 4800) and not the suggestion of ... Klaus Noack

04:20 AM CHIRP Bug #4355: Failed to read from Alinco DJ-G7

I would open a new ticket for the characters.
An annotation for this report. Is it possible to select the COM port... Klaus Noack

03:25 AM CHIRP Bug #4355: Failed to read from Alinco DJ-G7

I have got an answer from Alinco due to their program also doesn't work.
They told me to use a lower speed for trans... Klaus Noack

05:31 AM CHIRP Feature #4381 (New): Character set: single/double width

The Alinco DJ-G7 supports ASCII characters in two widths, CHIRP only supports the small one.
Example:
While enter... Klaus Noack

01/04/2017

11:20 AM CHIRP Bug #4355: Failed to read from Alinco DJ-G7

OK it seems the problem is the hardware and not CHIRP - so you can close this bug report.
I have no comparable cable... Klaus Noack

01/02/2017

11:45 AM CHIRP Bug #4355: Failed to read from Alinco DJ-G7

Hi Matt,
The cable was bought as a ERW-4C and a EDS-14 with the Radio but I never used them... I don't know how to... Klaus Noack

09:10 AM CHIRP Bug #4355: Failed to read from Alinco DJ-G7

The Firmware of my unit is EG5.100 (never changed by my).
It seems to be newer than the firmware on the download-s... Klaus Noack

01/01/2017

04:56 PM CHIRP Bug #4355 (Closed): Failed to read from Alinco DJ-G7

After selecting "Download from Radio" an error occured: Failed to communicate with radio: invalid literal for int() w... Klaus Noack