CHIRP

10/26/2022

03:03 AM CHIRP Feature #9385: Chirp not sending entire .img to radio Baofeng BF-F8HP / BF-UV10R

also when I change a channel on the radio to high power. It doesnt stay after a power cycle of the radio Chris H

02:55 AM CHIRP Feature #9385: Chirp not sending entire .img to radio Baofeng BF-F8HP / BF-UV10R

I have a BF-UV10R and using the BF-F8HP selection shows 3 power levels but when I flash it, only 2 are shown in the r... Chris H

06/04/2017

03:51 PM CHIRP Bug #4477: Baofeng UV-B5 FM not working after program

Nope never did.
Chris H

02/03/2017

08:23 AM CHIRP Bug #4477: Baofeng UV-B5 FM not working after program

If I leave it on FM after about 5 mins I hear static and it will pick up my computer if close enough but no stations.... Chris H

07:45 AM CHIRP Bug #4477: Baofeng UV-B5 FM not working after program

also on FM I hear no static and if I turn the volume to max a hear a slight hiss and a "heartbeat" 2 times a second i... Chris H

06:52 AM CHIRP Bug #4477: Baofeng UV-B5 FM not working after program

Jim Unroe wrote:
> My factory image shows that the radio comes with FM disabled by default. So a RESET would most li... Chris H

02/02/2017

07:01 PM CHIRP Bug #4477: Baofeng UV-B5 FM not working after program

original image does not resolve. Chris H

07:00 PM CHIRP Bug #4477: Baofeng UV-B5 FM not working after program

Jim Unroe wrote:
> Did it work before you uploaded your channels?
> Does it work again after you upload the origina... Chris H

02/01/2017

05:19 AM CHIRP Bug #4477: Baofeng UV-B5 FM not working after program

did factory reset, still no FM, no static at all on FM Chris H

05:03 AM CHIRP New Model #2293: UV-B5 with new firmware (27 menu entries) currently not supported

Richard Menedetter wrote:
> The newer Firmware UV-B5 (propably B6 as well) are not compatible with Chirp 0.4.1 or th... Chris H