CHIRP

06/14/2020

06:51 AM CHIRP Bug #7835: Error setting memory: Frequency requires 12.50kHz step

> Do some testing. Program some channels with CHIRP. Upload to radio and make sure the look/work OK. Download back ... Dave Alexander

06/13/2020

07:59 PM CHIRP Bug #7835: Error setting memory: Frequency requires 12.50kHz step

Ok, weird. Think I figured out the disconnect. If I open CHIRP, load the module before doing anything else, then open... Dave Alexander

07:14 PM CHIRP Bug #7835: Error setting memory: Frequency requires 12.50kHz step

Installed version CHIRP daily-20200603, loaded module as instructed. Opened image file containing "problematic" frequ... Dave Alexander

06/12/2020

12:05 PM CHIRP Bug #7835: Error setting memory: Frequency requires 12.50kHz step

Image file is attached. Dave Alexander

06/11/2020

06:44 PM CHIRP Bug #7835: Error setting memory: Frequency requires 12.50kHz step

According to the manual, supported steps are 2.5K, 5K, 6.25K, 10K, 12.5K, 15K, 20K, 25K, 30K, 50K.
Thank you for t... Dave Alexander

01:24 PM CHIRP Bug #7835: Error setting memory: Frequency requires 12.50kHz step

Have seen some other similar bug reports for other radios, which referenced that it might be an issue with the specif... Dave Alexander

04/28/2020

11:27 AM CHIRP Bug #7835 (Closed): Error setting memory: Frequency requires 12.50kHz step

Will not allow setting or pasting of some frequencies, such as 462.5625, returns error "Error setting memory: Frequen... Dave Alexander