Bug #5159
closedPrograming
0%
Description
I have a Baofeng UV 82. What values do I use to program a digital transmit code and no digital receive code (carrier activated). I do not understand the use of the DCTS Polarity column . I have tried using the DCTS-> in the Cross Mode column but that value does not stay there. It goes back to Tone-> Tone when the screen is refreshed. In the Tone mode column I have DCTS as the value. I have NN under DCTS Pol. I have also chosen my value for the DTCS Code (transmit). When refreshed it puts the same code in the DTCS Rx Code column.
Files
Updated by Bernhard Hailer over 3 years ago
- Status changed from New to Closed
- Chirp Version changed from 0.4.0 to daily
- Model affected changed from (All models) to Baofeng UV-82
- Platform changed from Windows to All
Such questions are asked best on the "mailing list":http://intrepid.danplanet.com/mailman/listinfo/chirp_users, instead by opening a bug report (and you usually get a fast response, too). Please also look into the Wiki, which answers a lot of questions; for example, review [DevelopersToneModes].