|
# Copyright 2008 Dan Smith <dsmith at danplanet.com>
|
|
#
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 3 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
import logging
|
|
|
|
from chirp.drivers import icf
|
|
from chirp import chirp_common, bitwise, errors, directory
|
|
from chirp.settings import RadioSetting, RadioSettingGroup, \
|
|
RadioSettingValueList, RadioSettingValueBoolean, \
|
|
RadioSettings
|
|
|
|
LOG = logging.getLogger(__name__)
|
|
|
|
|
|
ICV80_MEM_FORMAT = """
|
|
struct {
|
|
ul16 freq;
|
|
ul16 offset;
|
|
char name[5];
|
|
u8 unknown0:2,
|
|
rtone:6;
|
|
u8 unknown1:2,
|
|
ctone:6;
|
|
u8 unknown2:1,
|
|
dtcs:7;
|
|
u8 unknown3:5,
|
|
tuning_step:3;
|
|
u8 unknown4:2,
|
|
mode:1,
|
|
reverse_duplex:1,
|
|
duplex:2,
|
|
mult:2;
|
|
u8 unknown6:2,
|
|
dtcs_polarity:2,
|
|
unknown8:2,
|
|
tmode:2;
|
|
u8 unknown9:5,
|
|
tx_inhibit:1,
|
|
power:2;
|
|
} memory[207];
|
|
|
|
u8 skip[32];
|
|
|
|
u8 unused[32];
|
|
|
|
#seekto 0x0e50;
|
|
struct {
|
|
u8 unknown1:6,
|
|
beep:2;
|
|
u8 unknown2:3,
|
|
tot:5;
|
|
u8 unknown3;
|
|
u8 unknown4:6,
|
|
auto_pwr_off:2;
|
|
u8 unknown5:6,
|
|
lockout:2;
|
|
u8 unknown6:7,
|
|
squelch_delay:1;
|
|
u8 unknown7_0;
|
|
u8 unknown7_1:6,
|
|
mem_display1:2;
|
|
u8 unknown8:6,
|
|
mem_display2:2; // CS stores the display value here as well
|
|
u8 unknown9:7,
|
|
dial_func:1;
|
|
u8 unknown10:7,
|
|
lcd:1;
|
|
u8 unknown11:5,
|
|
pwr_save:3;
|
|
u8 unknown12:7,
|
|
sel_speed:1;
|
|
u8 unknown13:6,
|
|
mic_mode:2;
|
|
u8 unknown14:6,
|
|
battery_save:2;
|
|
u8 unknown15;
|
|
u8 unknown16:6,
|
|
resume:2;
|
|
u8 unknown17:5,
|
|
func_mode:3;
|
|
u8 unknown18:6,
|
|
backlight:2;
|
|
u8 unknown19;
|
|
u8 unknown:4,
|
|
vox_gain:4;
|
|
u8 unknown20:6,
|
|
mic_gain:2;
|
|
u8 unknown21:5,
|
|
vox_delay:3;
|
|
u8 unknown22:4,
|
|
vox_tot:4;
|
|
u8 unknown23[2];
|
|
u8 unknown24:6,
|
|
edge:2;
|
|
u8 unknown25;
|
|
u8 unknown26:7,
|
|
auto_low_pwr:1;
|
|
u8 unknown27[3];
|
|
|
|
} settings;
|
|
|
|
|
|
"""
|
|
|
|
SPECIAL_CHANNELS = {
|
|
"1A": 200, "1B": 201,
|
|
"2A": 202, "2B": 203,
|
|
"3A": 204, "3B": 205,
|
|
"C": 206,
|
|
}
|
|
|
|
TMODES = ["", "Tone", "TSQL", "DTCS"]
|
|
MODES = ["FM", "NFM"]
|
|
SKIPS = ["", "S"]
|
|
DUPLEXES = ["", "-", "+"]
|
|
DTCS_POLARITY = ["NN", "NR", "RN", "RR"]
|
|
TUNING_STEPS = [5.0, 10.0, 12.5, 15.0, 20.0, 25.0, 30.0, 50.0]
|
|
POWER_LEVELS = [
|
|
chirp_common.PowerLevel("High", watts=5.5),
|
|
chirp_common.PowerLevel("Low", watts=0.5),
|
|
chirp_common.PowerLevel("Mid", watts=2.5)
|
|
]
|
|
|
|
|
|
@directory.register
|
|
class ICV80Radio(icf.IcomCloneModeRadio, chirp_common.ExperimentalRadio):
|
|
"""Icom IC-V80"""
|
|
VENDOR = "Icom"
|
|
MODEL = "IC-V80"
|
|
|
|
_model = "\x32\x54\x00\x01"
|
|
_memsize = 0x0E80
|
|
_endframe = "Icom Inc\x2e7C"
|
|
_can_hispeed = True
|
|
_ranges = [(0x0000, 0x0CE0, 32),
|
|
(0x0CE0, 0x0D40, 16),
|
|
(0x0D40, 0x0E00, 32),
|
|
(0x0E00, 0x0E20, 16),
|
|
(0x0E20, 0x0E60, 32),
|
|
(0x0E60, 0x0E70, 16),
|
|
(0x0E70, 0x0E72, 2),
|
|
(0x0E72, 0x0E77, 5),
|
|
(0x0E77, 0x0E78, 1),
|
|
(0x0E78, 0x0E80, 8),
|
|
]
|
|
|
|
@classmethod
|
|
def get_prompts(cls):
|
|
rp = chirp_common.RadioPrompts()
|
|
rp.experimental = ("This radio driver is currently under development, "
|
|
"and not all the features or functions may work as"
|
|
"expected. You should proceed with caution.")
|
|
return rp
|
|
|
|
def get_features(self):
|
|
rf = chirp_common.RadioFeatures()
|
|
|
|
rf.memory_bounds = (0, 199)
|
|
rf.valid_modes = MODES
|
|
rf.valid_tmodes = TMODES
|
|
rf.valid_duplexes = DUPLEXES + ['off']
|
|
rf.valid_tuning_steps = TUNING_STEPS
|
|
rf.valid_power_levels = POWER_LEVELS
|
|
rf.valid_skips = SKIPS
|
|
rf.valid_name_length = 5
|
|
rf.valid_special_chans = sorted(SPECIAL_CHANNELS.keys())
|
|
rf.valid_bands = [(136000000, 174000000)]
|
|
rf.has_ctone = True
|
|
rf.has_offset = True
|
|
rf.has_bank = False
|
|
rf.has_settings = True
|
|
|
|
return rf
|
|
|
|
def process_mmap(self):
|
|
self._memobj = bitwise.parse(ICV80_MEM_FORMAT, self._mmap)
|
|
|
|
def get_settings(self):
|
|
_settings = self._memobj.settings
|
|
|
|
setmode = RadioSettingGroup("setmode", "Set Mode")
|
|
display = RadioSettingGroup("display", "Display")
|
|
sounds = RadioSettingGroup("sounds", "Sounds")
|
|
scan = RadioSettingGroup("scan", "Scan")
|
|
settings = RadioSettings(setmode, display, sounds, scan)
|
|
|
|
# TOT
|
|
opts = ["Off"] + ["%d min" % t for t in range(1, 31)]
|
|
setmode.append(
|
|
RadioSetting(
|
|
"tot", "Time out Timer",
|
|
RadioSettingValueList(opts, current_index=_settings.tot)))
|
|
|
|
# Lockout
|
|
opts = ["Off", "Rpt", "Busy"]
|
|
setmode.append(
|
|
RadioSetting(
|
|
"lockout", "Lockout",
|
|
RadioSettingValueList(opts, current_index=_settings.lockout)))
|
|
|
|
# Auto Power Off
|
|
opts = ["Off", "30 min", "1 hr", "2 hrs"]
|
|
setmode.append(
|
|
RadioSetting(
|
|
"auto_pwr_off", "Auto Power Off",
|
|
RadioSettingValueList(
|
|
opts, current_index=_settings.auto_pwr_off)))
|
|
|
|
# Power Save
|
|
opts = ["Off", "1:2", "1:8", "1:16", "Auto"]
|
|
setmode.append(
|
|
RadioSetting(
|
|
"pwr_save", "Power Save",
|
|
RadioSettingValueList(opts, current_index=_settings.pwr_save)))
|
|
|
|
# Battery Save
|
|
opts = ["Off", "Ni-MH", "Li-Ion"]
|
|
setmode.append(
|
|
RadioSetting(
|
|
"battery_save", "Battery Save",
|
|
RadioSettingValueList(
|
|
opts, current_index=_settings.battery_save)))
|
|
|
|
# Auto Low Power
|
|
opts = ["Off", "On"]
|
|
setmode.append(
|
|
RadioSetting(
|
|
"auto_low_pwr", "Auto Low Power",
|
|
RadioSettingValueList(
|
|
opts, current_index=_settings.auto_low_pwr)))
|
|
|
|
# Squelch Delay
|
|
opts = ["Short", "Long"]
|
|
setmode.append(
|
|
RadioSetting(
|
|
"squelch_delay", "Squelch Delay",
|
|
RadioSettingValueList(
|
|
opts, current_index=_settings.squelch_delay)))
|
|
|
|
# MIC Simple Mode
|
|
opts = ["Simple", "Normal 1", "Normal 2"]
|
|
setmode.append(
|
|
RadioSetting(
|
|
"mic_mode", "Mic Simple Mode",
|
|
RadioSettingValueList(opts, current_index=_settings.mic_mode)))
|
|
|
|
# MIC Gain
|
|
opts = ["1", "2", "3", "4"]
|
|
setmode.append(
|
|
RadioSetting(
|
|
"mic_gain", "Mic Gain",
|
|
RadioSettingValueList(opts, current_index=_settings.mic_gain)))
|
|
|
|
# VOX Gain
|
|
opts = ["Off"] + ["%d" % t for t in range(1, 11)]
|
|
setmode.append(
|
|
RadioSetting(
|
|
"vox_gain", "VOX Gain",
|
|
RadioSettingValueList(opts, current_index=_settings.vox_gain)))
|
|
|
|
# VOX Delay
|
|
opts = ["0.5 sec", "1.0 sec", "1.5 sec", "2.0 sec", "2.5 sec",
|
|
"3.0 sec"]
|
|
setmode.append(
|
|
RadioSetting(
|
|
"vox_delay", "VOX Delay",
|
|
RadioSettingValueList(
|
|
opts, current_index=_settings.vox_delay)))
|
|
|
|
# VOX Time out Timer
|
|
opts = ["Off", "1 min", "2 min", "3 min", "4 min", "5 min", "10 min",
|
|
"15 min"]
|
|
setmode.append(
|
|
RadioSetting(
|
|
"vox_tot", "VOX Time-Out Timer",
|
|
RadioSettingValueList(opts, current_index=_settings.vox_tot)))
|
|
|
|
# Select Speed
|
|
opts = ["Manual", "Auto"]
|
|
setmode.append(
|
|
RadioSetting(
|
|
"sel_speed", "Select Speed",
|
|
RadioSettingValueList(
|
|
opts, current_index=_settings.sel_speed)))
|
|
|
|
# Dial Function
|
|
opts = ["Audio Volume", "Tuning Dial"]
|
|
setmode.append(
|
|
RadioSetting(
|
|
"dial_func", "Dial Function",
|
|
RadioSettingValueList(
|
|
opts, current_index=_settings.dial_func)))
|
|
|
|
# Function Mode
|
|
opts = ["0 sec", "1 sec", "2 sec", "3 sec", "Manual"]
|
|
setmode.append(
|
|
RadioSetting(
|
|
"func_mode", "Function Mode",
|
|
RadioSettingValueList(
|
|
opts, current_index=_settings.func_mode)))
|
|
|
|
# Backlight
|
|
opts = ["Off", "On", "Auto"]
|
|
display.append(
|
|
RadioSetting(
|
|
"backlight", "Backlight",
|
|
RadioSettingValueList(
|
|
opts, current_index=_settings.backlight)))
|
|
|
|
# LCD Contrast
|
|
opts = ["Low", "Auto"]
|
|
display.append(
|
|
RadioSetting(
|
|
"lcd", "LCD Contrast",
|
|
RadioSettingValueList(opts, current_index=_settings.lcd)))
|
|
|
|
# Memory Display
|
|
opts = ["Frequency", "Channel", "Name"]
|
|
display.append(
|
|
RadioSetting(
|
|
"mem_display1", "Memory Display",
|
|
RadioSettingValueList(
|
|
opts, current_index=_settings.mem_display1)))
|
|
|
|
# Beep
|
|
opts = ["Off", "1", "2", "3"]
|
|
sounds.append(
|
|
RadioSetting(
|
|
"beep", "Beep",
|
|
RadioSettingValueList(opts, current_index=_settings.beep)))
|
|
|
|
# Edge
|
|
opts = ["All", "P1", "P2", "P3"]
|
|
scan.append(
|
|
RadioSetting(
|
|
"edge", "Edge",
|
|
RadioSettingValueList(opts, current_index=_settings.edge)))
|
|
|
|
# Resume
|
|
opts = ["T-5", "T-10", "T-15", "P-2"]
|
|
scan.append(
|
|
RadioSetting(
|
|
"resume", "Resume",
|
|
RadioSettingValueList(opts, current_index=_settings.resume)))
|
|
|
|
return settings
|
|
|
|
def set_settings(self, settings):
|
|
_settings = self._memobj.settings
|
|
for element in settings:
|
|
if not isinstance(element, RadioSetting):
|
|
self.set_settings(element)
|
|
continue
|
|
if not element.changed():
|
|
continue
|
|
|
|
try:
|
|
if element.has_apply_callback():
|
|
LOG.debug("Using apply callback")
|
|
element.run_apply_callback()
|
|
else:
|
|
setting = element.get_name()
|
|
LOG.debug("Setting %s = %s" % (setting, element.value))
|
|
setattr(_settings, setting, element.value)
|
|
# This appears to need to be mirrored?
|
|
if element.get_name() == 'mem_display1':
|
|
_settings.mem_display2 = _settings.mem_display1
|
|
except Exception:
|
|
LOG.debug(element.get_name())
|
|
raise
|
|
|
|
def _get_memory(self, number, extd_number=None):
|
|
bit = 1 << (number % 8)
|
|
byte = number // 8
|
|
|
|
_mem = self._memobj.memory[number]
|
|
_unused = self._memobj.unused[byte]
|
|
_skip = self._memobj.skip[byte]
|
|
|
|
mem = chirp_common.Memory(number)
|
|
|
|
if extd_number is not None:
|
|
mem.extd_number = extd_number
|
|
mem.immutable = ["name", "number", "extd_number", "skip"]
|
|
if extd_number == "C":
|
|
_unused = False
|
|
|
|
if (_unused & bit):
|
|
mem.empty = True
|
|
return mem
|
|
|
|
if int(_mem.mult):
|
|
mult = 6250
|
|
else:
|
|
mult = 5000
|
|
mem.freq = int(_mem.freq) * mult
|
|
mem.offset = int(_mem.offset) * mult
|
|
if mem.extd_number == "":
|
|
mem.name = str(_mem.name).rstrip()
|
|
mem.skip = (_skip & bit) and "S" or ""
|
|
if _mem.tx_inhibit:
|
|
mem.duplex = 'off'
|
|
else:
|
|
mem.duplex = DUPLEXES[_mem.duplex]
|
|
mem.power = POWER_LEVELS[_mem.power]
|
|
mem.tuning_step = TUNING_STEPS[_mem.tuning_step]
|
|
mem.mode = MODES[_mem.mode]
|
|
mem.tmode = TMODES[_mem.tmode]
|
|
mem.rtone = chirp_common.TONES[_mem.rtone]
|
|
mem.ctone = chirp_common.TONES[_mem.ctone]
|
|
mem.dtcs = chirp_common.DTCS_CODES[_mem.dtcs]
|
|
mem.dtcs_polarity = DTCS_POLARITY[_mem.dtcs_polarity]
|
|
|
|
# Reverse duplex
|
|
mem.extra = RadioSettingGroup("extra", "Extra")
|
|
rev = RadioSetting("reverse_duplex", "Reverse duplex",
|
|
RadioSettingValueBoolean(bool(_mem.reverse_duplex)))
|
|
rev.set_doc("Reverse duplex")
|
|
mem.extra.append(rev)
|
|
|
|
return mem
|
|
|
|
def get_memory(self, number):
|
|
extd_number = None
|
|
if isinstance(number, str):
|
|
try:
|
|
extd_number = number
|
|
number = SPECIAL_CHANNELS[number]
|
|
except KeyError:
|
|
raise errors.InvalidMemoryLocation(
|
|
"Unknown channel %s" % number)
|
|
|
|
return self._get_memory(number, extd_number)
|
|
|
|
def _fill_memory(self, mem):
|
|
number = mem.number
|
|
_mem = self._memobj.memory[number]
|
|
|
|
# zero-fill
|
|
_mem.freq = 146010000 // 5000
|
|
_mem.offset = 600000 // 5000
|
|
_mem.name = str("").ljust(5)
|
|
_mem.duplex = 0x0
|
|
_mem.reverse_duplex = 0x0
|
|
_mem.tx_inhibit = 0x1
|
|
_mem.power = 0x0
|
|
_mem.tuning_step = 0x0
|
|
_mem.mode = 0x0
|
|
_mem.tmode = 0x0
|
|
_mem.rtone = 0x8
|
|
_mem.ctone = 0x8
|
|
_mem.dtcs = 0x0
|
|
_mem.dtcs_polarity = 0x0
|
|
|
|
for setting in mem.extra:
|
|
setattr(_mem, setting.get_name(), setting.value)
|
|
|
|
def set_memory(self, mem):
|
|
bit = 1 << (mem.number % 8)
|
|
byte = mem.number // 8
|
|
|
|
_mem = self._memobj.memory[mem.number]
|
|
_unused = self._memobj.unused[byte]
|
|
_skip = (mem.extd_number == "") and self._memobj.skip[byte] or None
|
|
assert (_mem)
|
|
|
|
if mem.empty:
|
|
self._fill_memory(mem)
|
|
_unused |= bit
|
|
if _skip is not None:
|
|
_skip |= bit
|
|
return
|
|
|
|
_mem.set_raw(b'\x00' * 16)
|
|
|
|
if chirp_common.required_step(mem.freq) == 12.5:
|
|
mult = 6250
|
|
else:
|
|
mult = 5000
|
|
_mem.mult = 0 if mult == 5000 else 3
|
|
_mem.freq = mem.freq // mult
|
|
_mem.offset = int(mem.offset) // mult
|
|
_mem.name = str(mem.name).ljust(5)
|
|
try:
|
|
_mem.duplex = DUPLEXES.index(mem.duplex)
|
|
except ValueError:
|
|
_mem.duplex = 0
|
|
power = mem.power or POWER_LEVELS[0]
|
|
_mem.power = POWER_LEVELS.index(power)
|
|
_mem.tuning_step = TUNING_STEPS.index(mem.tuning_step)
|
|
_mem.mode = MODES.index(mem.mode)
|
|
_mem.tmode = TMODES.index(mem.tmode)
|
|
_mem.rtone = chirp_common.TONES.index(mem.rtone)
|
|
_mem.ctone = chirp_common.TONES.index(mem.ctone)
|
|
_mem.dtcs = chirp_common.DTCS_CODES.index(mem.dtcs)
|
|
_mem.dtcs_polarity = DTCS_POLARITY.index(mem.dtcs_polarity)
|
|
_mem.tx_inhibit = mem.duplex == 'off'
|
|
|
|
# Set used
|
|
_unused &= ~bit
|
|
|
|
# Set skip
|
|
if _skip is not None:
|
|
if mem.skip == "S":
|
|
_skip |= bit
|
|
else:
|
|
_skip &= ~bit
|
|
|
|
if mem.extra:
|
|
_mem.reverse_duplex = mem.extra['reverse_duplex'].value
|
|
|
|
def get_raw_memory(self, number):
|
|
return repr(self._memobj.memory[number])
|
