|
# Copyright 2016:
|
|
# * Pavel Milanes CO7WT, <pavelmc@gmail.com>
|
|
# * Jim Unroe KC9HI, <rock.unroe@gmail.com>
|
|
#
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 2 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
import time
|
|
import struct
|
|
import logging
|
|
|
|
LOG = logging.getLogger(__name__)
|
|
|
|
from chirp import chirp_common, directory, memmap
|
|
from chirp import bitwise, errors, util
|
|
from chirp.settings import RadioSettingGroup, RadioSetting, \
|
|
RadioSettingValueBoolean, RadioSettingValueList, \
|
|
RadioSettingValueString, RadioSettingValueInteger, \
|
|
RadioSettings, InvalidValueError
|
|
from textwrap import dedent
|
|
|
|
MEM_FORMAT = """
|
|
#seekto 0x0000;
|
|
struct {
|
|
lbcd rxfreq[4];
|
|
lbcd txfreq[4];
|
|
ul16 rxtone;
|
|
ul16 txtone;
|
|
u8 unknown0:4,
|
|
scode:4;
|
|
u8 unknown1:2,
|
|
spmute:1,
|
|
unknown2:3,
|
|
optsig:2;
|
|
u8 unknown3:3,
|
|
scramble:1,
|
|
unknown4:3,
|
|
power:1;
|
|
u8 unknown5:1,
|
|
wide:1,
|
|
unknown6:2,
|
|
bcl:1,
|
|
add:1,
|
|
pttid:2;
|
|
} memory[200];
|
|
|
|
#seekto 0x0E00;
|
|
struct {
|
|
u8 tdr;
|
|
u8 unknown1;
|
|
u8 sql;
|
|
u8 unknown2[2];
|
|
u8 tot;
|
|
u8 apo; // BTech radios use this as the Auto Power Off time
|
|
// other radios use this as pre-Time Out Alert
|
|
u8 unknown3;
|
|
u8 abr;
|
|
u8 beep;
|
|
u8 unknown4[4];
|
|
u8 dtmfst;
|
|
u8 unknown5[2];
|
|
u8 prisc;
|
|
u8 prich;
|
|
u8 screv;
|
|
u8 unknown6[2];
|
|
u8 pttid;
|
|
u8 pttlt;
|
|
u8 unknown7;
|
|
u8 emctp;
|
|
u8 emcch;
|
|
u8 ringt;
|
|
u8 unknown8;
|
|
u8 camdf;
|
|
u8 cbmdf;
|
|
u8 sync; // BTech radios use this as the display sync setting
|
|
// other radios use this as the auto keypad lock setting
|
|
u8 ponmsg;
|
|
u8 wtled;
|
|
u8 rxled;
|
|
u8 txled;
|
|
u8 unknown9[5];
|
|
u8 anil;
|
|
u8 reps;
|
|
u8 repm;
|
|
u8 tdrab;
|
|
u8 ste;
|
|
u8 rpste;
|
|
u8 rptdl;
|
|
} settings;
|
|
|
|
#seekto 0x0E80;
|
|
struct {
|
|
u8 unknown1;
|
|
u8 vfomr;
|
|
u8 keylock;
|
|
u8 unknown2;
|
|
u8 unknown3:4,
|
|
vfomren:1,
|
|
unknown4:1,
|
|
reseten:1,
|
|
menuen:1;
|
|
u8 unknown5[11];
|
|
u8 dispab;
|
|
u8 mrcha;
|
|
u8 mrchb;
|
|
u8 menu;
|
|
} settings2;
|
|
|
|
#seekto 0x0EC0;
|
|
struct {
|
|
char line1[6];
|
|
char line2[6];
|
|
} poweron_msg;
|
|
|
|
struct settings_vfo {
|
|
u8 freq[8];
|
|
u8 unknown1;
|
|
u8 offset[4];
|
|
u8 unknown2[3];
|
|
ul16 rxtone;
|
|
ul16 txtone;
|
|
u8 scode;
|
|
u8 spmute;
|
|
u8 optsig;
|
|
u8 scramble;
|
|
u8 wide;
|
|
u8 power;
|
|
u8 shiftd;
|
|
u8 step;
|
|
u8 unknown3[4];
|
|
};
|
|
|
|
#seekto 0x0F00;
|
|
struct {
|
|
struct settings_vfo a;
|
|
struct settings_vfo b;
|
|
} vfo;
|
|
|
|
#seekto 0x1000;
|
|
struct {
|
|
char name[6];
|
|
u8 unknown1[10];
|
|
} names[200];
|
|
|
|
#seekto 0x3C90;
|
|
struct {
|
|
u8 vhf_low[3];
|
|
u8 vhf_high[3];
|
|
u8 uhf_low[3];
|
|
u8 uhf_high[3];
|
|
} ranges;
|
|
|
|
// the 2501+220 has a different zone for storing ranges
|
|
|
|
#seekto 0x3CD0;
|
|
struct {
|
|
u8 vhf_low[3];
|
|
u8 vhf_high[3];
|
|
u8 unknown1[4];
|
|
u8 unknown2[6];
|
|
u8 vhf2_low[3];
|
|
u8 vhf2_high[3];
|
|
u8 unknown3[4];
|
|
u8 unknown4[6];
|
|
u8 uhf_low[3];
|
|
u8 uhf_high[3];
|
|
} ranges220;
|
|
|
|
#seekto 0x3F70;
|
|
struct {
|
|
char fp[6];
|
|
} fingerprint;
|
|
|
|
"""
|
|
|
|
# A note about the memmory in these radios
|
|
#
|
|
# The real memory of these radios extends to 0x4000
|
|
# On read the factory software only uses up to 0x3200
|
|
# On write it just uploads the contents up to 0x3100
|
|
#
|
|
# The mem beyond 0x3200 holds the ID data
|
|
|
|
MEM_SIZE = 0x4000
|
|
BLOCK_SIZE = 0x40
|
|
TX_BLOCK_SIZE = 0x10
|
|
ACK_CMD = "\x06"
|
|
MODES = ["FM", "NFM"]
|
|
SKIP_VALUES = ["S", ""]
|
|
TONES = chirp_common.TONES
|
|
DTCS = sorted(chirp_common.DTCS_CODES + [645])
|
|
NAME_LENGTH = 6
|
|
PTTID_LIST = ["OFF", "BOT", "EOT", "BOTH"]
|
|
PTTIDCODE_LIST = ["%s" % x for x in range(1, 16)]
|
|
OPTSIG_LIST = ["OFF", "DTMF", "2TONE", "5TONE"]
|
|
SPMUTE_LIST = ["Tone/DTCS", "Tone/DTCS and Optsig", "Tone/DTCS or Optsig"]
|
|
|
|
LIST_TOT = ["%s sec" % x for x in range(15, 615, 15)]
|
|
LIST_TOA = ["Off"] + ["%s seconds" % x for x in range(1, 11)]
|
|
LIST_APO = ["Off"] + ["%s minutes" % x for x in range(30, 330, 30)]
|
|
LIST_ABR = ["Off"] + ["%s seconds" % x for x in range(1, 51)]
|
|
LIST_DTMFST = ["OFF", "Keyboard", "ANI", "Keyboad + ANI"]
|
|
LIST_SCREV = ["TO (timeout)", "CO (carrier operated)", "SE (search)"]
|
|
LIST_EMCTP = ["TX alarm sound", "TX ANI", "Both"]
|
|
LIST_RINGT = ["Off"] + ["%s seconds" % x for x in range(1, 10)]
|
|
LIST_MDF = ["Frequency", "Channel", "Name"]
|
|
LIST_PONMSG = ["Full", "Message", "Battery voltage"]
|
|
LIST_COLOR = ["Off", "Blue", "Orange", "Purple"]
|
|
LIST_REPS = ["1000 Hz", "1450 Hz", "1750 Hz", "2100Hz"]
|
|
LIST_REPM = ["Off", "Carrier", "CTCSS or DCS", "Tone", "DTMF"]
|
|
LIST_RPTDL = ["Off"] + ["%s ms" % x for x in range(1, 10)]
|
|
LIST_ANIL = ["3", "4", "5"]
|
|
LIST_AB = ["A", "B"]
|
|
LIST_VFOMR = ["Frequency", "Channel"]
|
|
LIST_SHIFT = ["Off", "+", "-"]
|
|
LIST_TXP = ["High", "Low"]
|
|
LIST_WIDE = ["Wide", "Narrow"]
|
|
STEPS = [2.5, 5.0, 6.25, 10.0, 12.5, 25.0]
|
|
LIST_STEP = [str(x) for x in STEPS]
|
|
|
|
# This is a general serial timeout for all serial read functions.
|
|
# Practice has show that about 0.7 sec will be enough to cover all radios.
|
|
STIMEOUT = 0.7
|
|
|
|
# this var controls the verbosity in the debug and by default it's low (False)
|
|
# make it True and you will to get a very verbose debug.log
|
|
debug = False
|
|
|
|
# Power Levels
|
|
NORMAL_POWER_LEVELS = [chirp_common.PowerLevel("High", watts=25),
|
|
chirp_common.PowerLevel("Low", watts=10)]
|
|
UV5001_POWER_LEVELS = [chirp_common.PowerLevel("High", watts=50),
|
|
chirp_common.PowerLevel("Low", watts=10)]
|
|
|
|
# this must be defined globaly
|
|
POWER_LEVELS = None
|
|
|
|
# valid chars on the LCD, Note that " " (space) is stored as "\xFF"
|
|
VALID_CHARS = chirp_common.CHARSET_ALPHANUMERIC + \
|
|
"`{|}!\"#$%&'()*+,-./:;<=>?@[]^_"
|
|
|
|
|
|
##### ID strings #####################################################
|
|
|
|
# BTECH UV2501 pre-production units
|
|
UV2501pp_fp = "M2C294"
|
|
# BTECH UV2501 pre-production units 2 + and 1st Gen radios
|
|
UV2501pp2_fp = "M29204"
|
|
# B-TECH UV-2501 second generation (2G) radios
|
|
UV2501G2_fp = "BTG214"
|
|
|
|
|
|
# B-TECH UV-2501+220 pre-production units
|
|
UV2501_220pp_fp = "M3C281"
|
|
# extra block read for the 2501+220 pre-production units
|
|
# the same for all of this radios so far
|
|
UV2501_220pp_id = " 280528"
|
|
# B-TECH UV-2501+220
|
|
UV2501_220_fp = "M3G201"
|
|
# new variant, let's call it Generation 2
|
|
UV2501_220G2_fp = "BTG211"
|
|
|
|
|
|
# B-TECH UV-5001 pre-production units + 1st Gen radios
|
|
UV5001pp_fp = "V19204"
|
|
# B-TECH UV-5001 alpha units
|
|
UV5001alpha_fp = "V28204"
|
|
# B-TECH UV-5001 second generation (2G) radios
|
|
UV5001G2_fp = "BTG214"
|
|
# B-TECH UV-5001 second generation (2G2)
|
|
UV5001G22_fp = "V2G204"
|
|
|
|
|
|
# WACCOM Mini-8900
|
|
MINI8900_fp = "M28854"
|
|
|
|
|
|
# QYT KT-UV980 & JetStream JT2705M
|
|
KTUV980_fp = "H28854"
|
|
|
|
|
|
# QYT KT8900 & Juentai JT-6188
|
|
KT8900_fp = "M29154"
|
|
# New generation KT8900
|
|
KT8900_fp2 = "M2C234"
|
|
# this radio has an extra ID
|
|
KT8900_id = " 303688"
|
|
|
|
|
|
# Sainsonic GT890
|
|
GT890_fp = "M2G1F4"
|
|
# this need a second id
|
|
# and is the same of the QYT KT8900
|
|
|
|
|
|
#### MAGICS
|
|
# for the Waccom Mini-8900
|
|
MSTRING_MINI8900 = "\x55\xA5\xB5\x45\x55\x45\x4d\x02"
|
|
# for the B-TECH UV-2501+220 (including pre production ones)
|
|
MSTRING_220 = "\x55\x20\x15\x12\x12\x01\x4d\x02"
|
|
# for the QYT KT8900
|
|
MSTRING_KT8900 = "\x55\x20\x15\x09\x16\x45\x4D\x02"
|
|
# magic string for all other models
|
|
MSTRING = "\x55\x20\x15\x09\x20\x45\x4d\x02"
|
|
|
|
|
|
def _clean_buffer(radio):
|
|
"""Cleaning the read serial buffer, hard timeout to survive an infinite
|
|
data stream"""
|
|
|
|
# touching the serial timeout to optimize the flushing
|
|
# restored at the end to the default value
|
|
radio.pipe.setTimeout(0.1)
|
|
dump = "1"
|
|
datacount = 0
|
|
|
|
try:
|
|
while len(dump) > 0:
|
|
dump = radio.pipe.read(100)
|
|
datacount += len(dump)
|
|
# hard limit to survive a infinite serial data stream
|
|
# 5 times bigger than a normal rx block (69 bytes)
|
|
if datacount > 345:
|
|
seriale = "Please check your serial port selection."
|
|
raise errors.RadioError(seriale)
|
|
|
|
# restore the default serial timeout
|
|
radio.pipe.setTimeout(STIMEOUT)
|
|
|
|
except Exception:
|
|
raise errors.RadioError("Unknown error cleaning the serial buffer")
|
|
|
|
|
|
def _rawrecv(radio, amount):
|
|
"""Raw read from the radio device, less intensive way"""
|
|
|
|
data = ""
|
|
|
|
try:
|
|
data = radio.pipe.read(amount)
|
|
|
|
# DEBUG
|
|
if debug is True:
|
|
LOG.debug("<== (%d) bytes:\n\n%s" %
|
|
(len(data), util.hexprint(data)))
|
|
|
|
# fail if no data is received
|
|
if len(data) == 0:
|
|
raise errors.RadioError("No data received from radio")
|
|
|
|
# notice on the logs if short
|
|
if len(data) < amount:
|
|
LOG.warn("Short reading %d bytes from the %d requested." %
|
|
(len(data), amount))
|
|
|
|
except:
|
|
raise errors.RadioError("Error reading data from radio")
|
|
|
|
return data
|
|
|
|
|
|
def _send(radio, data):
|
|
"""Send data to the radio device"""
|
|
|
|
try:
|
|
for byte in data:
|
|
radio.pipe.write(byte)
|
|
|
|
# DEBUG
|
|
if debug is True:
|
|
LOG.debug("==> (%d) bytes:\n\n%s" %
|
|
(len(data), util.hexprint(data)))
|
|
except:
|
|
raise errors.RadioError("Error sending data to radio")
|
|
|
|
|
|
def _make_frame(cmd, addr, length, data=""):
|
|
"""Pack the info in the headder format"""
|
|
frame = "\x06" + struct.pack(">BHB", ord(cmd), addr, length)
|
|
# add the data if set
|
|
if len(data) != 0:
|
|
frame += data
|
|
|
|
return frame
|
|
|
|
|
|
def _recv(radio, addr):
|
|
"""Get data from the radio all at once to lower syscalls load"""
|
|
|
|
# Get the full 69 bytes at a time to reduce load
|
|
# 1 byte ACK + 4 bytes header + 64 bytes of data (BLOCK_SIZE)
|
|
|
|
# get the whole block
|
|
block = _rawrecv(radio, BLOCK_SIZE + 5)
|
|
|
|
# basic check
|
|
if len(block) < (BLOCK_SIZE + 5):
|
|
raise errors.RadioError("Short read of the block 0x%04x" % addr)
|
|
|
|
# checking for the ack
|
|
if block[0] != ACK_CMD:
|
|
raise errors.RadioError("Bad ack from radio in block 0x%04x" % addr)
|
|
|
|
# header validation
|
|
c, a, l = struct.unpack(">BHB", block[1:5])
|
|
if a != addr or l != BLOCK_SIZE or c != ord("X"):
|
|
LOG.debug("Invalid header for block 0x%04x" % addr)
|
|
LOG.debug("CMD: %s ADDR: %04x SIZE: %02x" % (c, a, l))
|
|
raise errors.RadioError("Invalid header for block 0x%04x:" % addr)
|
|
|
|
# return the data
|
|
return block[5:]
|
|
|
|
|
|
def _start_clone_mode(radio, status):
|
|
"""Put the radio in clone mode and get the ident string, 3 tries"""
|
|
|
|
# cleaning the serial buffer
|
|
_clean_buffer(radio)
|
|
|
|
# prep the data to show in the UI
|
|
status.cur = 0
|
|
status.msg = "Identifying the radio..."
|
|
status.max = 3
|
|
radio.status_fn(status)
|
|
|
|
try:
|
|
for a in range(0, status.max):
|
|
# Update the UI
|
|
status.cur = a + 1
|
|
radio.status_fn(status)
|
|
|
|
# send the magic word
|
|
_send(radio, radio._magic)
|
|
|
|
# Now you get a x06 of ACK if all goes well
|
|
ack = radio.pipe.read(1)
|
|
|
|
if ack == "\x06":
|
|
# DEBUG
|
|
LOG.info("Magic ACK received")
|
|
status.cur = status.max
|
|
radio.status_fn(status)
|
|
|
|
return True
|
|
|
|
return False
|
|
|
|
except errors.RadioError:
|
|
raise
|
|
except Exception, e:
|
|
raise errors.RadioError("Error sending Magic to radio:\n%s" % e)
|
|
|
|
|
|
def _do_ident(radio, status, upload=False):
|
|
"""Put the radio in PROGRAM mode & identify it"""
|
|
# set the serial discipline
|
|
radio.pipe.setBaudrate(9600)
|
|
radio.pipe.setParity("N")
|
|
|
|
# open the radio into program mode
|
|
if _start_clone_mode(radio, status) is False:
|
|
if radio.MODEL == "KT8900":
|
|
error = "Radio didn't entered in clone mode; there is a generation"
|
|
error += " of this radios that are a clone of the WACCOM Mini-8900"
|
|
error += " please try that also."
|
|
raise errors.RadioError(error)
|
|
else:
|
|
raise errors.RadioError("Radio didn't entered in the clone mode")
|
|
|
|
# Ok, get the ident string
|
|
ident = _rawrecv(radio, 49)
|
|
|
|
# basic check for the ident
|
|
if len(ident) != 49:
|
|
raise errors.RadioError("Radio send a short ident block.")
|
|
|
|
# check if ident is OK
|
|
itis = False
|
|
for fp in radio._fileid:
|
|
if fp in ident:
|
|
itis = True
|
|
break
|
|
|
|
if itis is False:
|
|
LOG.debug("Incorrect model ID, got this:\n\n" + util.hexprint(ident))
|
|
raise errors.RadioError("Radio identification failed.")
|
|
|
|
# some radios needs a extra read and check for a code on it, this ones
|
|
# has the check value in the _id2 var, others simply False
|
|
if radio._id2 is not False:
|
|
# lower the timeout here as this radios are reseting due to timeout
|
|
radio.pipe.setTimeout(0.05)
|
|
|
|
# query & receive the extra ID
|
|
_send(radio, _make_frame("S", 0x3DF0, 16))
|
|
id2 = _rawrecv(radio, 21)
|
|
|
|
# WARNING !!!!!!
|
|
# different radios send a response with a different amount of data
|
|
# it seems that it's padded with \xff, \x20 and some times with \x00
|
|
# we just care about the first 16, our magic string is in there
|
|
if len(id2) < 16:
|
|
raise errors.RadioError("The extra ID is short, aborting.")
|
|
|
|
# ok, the correct string must be in the received data
|
|
if radio._id2 not in id2:
|
|
LOG.debug("Full *BAD* extra ID on the %s is: \n%s" %
|
|
(radio.MODEL, util.hexprint(id2)))
|
|
raise errors.RadioError("The extra ID is wrong, aborting.")
|
|
|
|
# this radios need a extra request/answer here on the upload
|
|
# the amount of data received depends of the radio type
|
|
#
|
|
# also the first block of TX must no have the ACK at the beginning
|
|
# see _upload for this.
|
|
if upload is True:
|
|
# send an ACK
|
|
_send(radio, ACK_CMD)
|
|
|
|
# the amount of data depend on the radio, so far we have two radios
|
|
# reading two bytes with an ACK at the end and just ONE with just
|
|
# one byte (QYT KT8900)
|
|
# the JT-6188 appears a clone of the last, but reads TWO bytes.
|
|
#
|
|
# we will read two bytes with a custom timeout to not penalize the
|
|
# users for this.
|
|
#
|
|
# we just check for a response and last byte being a ACK, that is
|
|
# the common stone for all radios (3 so far)
|
|
ack = _rawrecv(radio, 2)
|
|
|
|
# checking
|
|
if len(ack) == 0 or ack[-1:] != ACK_CMD:
|
|
raise errors.RadioError("Radio didn't ACK the upload")
|
|
|
|
# restore the default serial timeout
|
|
radio.pipe.setTimeout(STIMEOUT)
|
|
|
|
# DEBUG
|
|
LOG.info("Positive ident, this is a %s %s" % (radio.VENDOR, radio.MODEL))
|
|
|
|
return True
|
|
|
|
|
|
def _download(radio):
|
|
"""Get the memory map"""
|
|
|
|
# UI progress
|
|
status = chirp_common.Status()
|
|
|
|
# put radio in program mode and identify it
|
|
_do_ident(radio, status)
|
|
|
|
# the models that doesn't have the extra ID have to make a dummy read here
|
|
if radio._id2 is False:
|
|
_send(radio, _make_frame("S", 0, BLOCK_SIZE))
|
|
discard = _rawrecv(radio, BLOCK_SIZE + 5)
|
|
|
|
if debug is True:
|
|
LOG.info("Dummy first block read done, got this:\n\n %s",
|
|
util.hexprint(discard))
|
|
|
|
# reset the progress bar in the UI
|
|
status.max = MEM_SIZE / BLOCK_SIZE
|
|
status.msg = "Cloning from radio..."
|
|
status.cur = 0
|
|
radio.status_fn(status)
|
|
|
|
# cleaning the serial buffer
|
|
_clean_buffer(radio)
|
|
|
|
data = ""
|
|
for addr in range(0, MEM_SIZE, BLOCK_SIZE):
|
|
# sending the read request
|
|
_send(radio, _make_frame("S", addr, BLOCK_SIZE))
|
|
|
|
# read
|
|
d = _recv(radio, addr)
|
|
|
|
# aggregate the data
|
|
data += d
|
|
|
|
# UI Update
|
|
status.cur = addr / BLOCK_SIZE
|
|
status.msg = "Cloning from radio..."
|
|
radio.status_fn(status)
|
|
|
|
return data
|
|
|
|
|
|
def _upload(radio):
|
|
"""Upload procedure"""
|
|
|
|
# The UPLOAD mem is restricted to lower than 0x3100,
|
|
# so we will overide that here localy
|
|
MEM_SIZE = 0x3100
|
|
|
|
# UI progress
|
|
status = chirp_common.Status()
|
|
|
|
# put radio in program mode and identify it
|
|
_do_ident(radio, status, True)
|
|
|
|
# get the data to upload to radio
|
|
data = radio.get_mmap()
|
|
|
|
# Reset the UI progress
|
|
status.max = MEM_SIZE / TX_BLOCK_SIZE
|
|
status.cur = 0
|
|
status.msg = "Cloning to radio..."
|
|
radio.status_fn(status)
|
|
|
|
# the radios that doesn't have the extra ID 'may' do a dummy write, I found
|
|
# that leveraging the bad ACK and NOT doing the dummy write is ok, as the
|
|
# dummy write is accepted (it actually writes to the mem!) by the radio.
|
|
|
|
# cleaning the serial buffer
|
|
_clean_buffer(radio)
|
|
|
|
# the fun start here
|
|
for addr in range(0, MEM_SIZE, TX_BLOCK_SIZE):
|
|
# getting the block of data to send
|
|
d = data[addr:addr + TX_BLOCK_SIZE]
|
|
|
|
# build the frame to send
|
|
frame = _make_frame("X", addr, TX_BLOCK_SIZE, d)
|
|
|
|
# first block must not send the ACK at the beginning for the
|
|
# ones that has the extra id, since this have to do a extra step
|
|
if addr == 0 and radio._id2 is not False:
|
|
frame = frame[1:]
|
|
|
|
# send the frame
|
|
_send(radio, frame)
|
|
|
|
# receiving the response
|
|
ack = _rawrecv(radio, 1)
|
|
|
|
# basic check
|
|
if len(ack) != 1:
|
|
raise errors.RadioError("No ACK when writing block 0x%04x" % addr)
|
|
|
|
if not ack in "\x06\x05":
|
|
raise errors.RadioError("Bad ACK writing block 0x%04x:" % addr)
|
|
|
|
# UI Update
|
|
status.cur = addr / TX_BLOCK_SIZE
|
|
status.msg = "Cloning to radio..."
|
|
radio.status_fn(status)
|
|
|
|
|
|
def model_match(cls, data):
|
|
"""Match the opened/downloaded image to the correct version"""
|
|
rid = data[0x3f70:0x3f76]
|
|
|
|
if rid in cls._fileid:
|
|
return True
|
|
|
|
return False
|
|
|
|
|
|
def _decode_ranges(low, high):
|
|
"""Unpack the data in the ranges zones in the memmap and return
|
|
a tuple with the integer corresponding to the Mhz it means"""
|
|
ilow = int(low[0]) * 100 + int(low[1]) * 10 + int(low[2])
|
|
ihigh = int(high[0]) * 100 + int(high[1]) * 10 + int(high[2])
|
|
ilow *= 1000000
|
|
ihigh *= 1000000
|
|
|
|
return (ilow, ihigh)
|
|
|
|
|
|
def _split(rf, f1, f2):
|
|
"""Returns False if the two freqs are in the same band (no split)
|
|
or True otherwise"""
|
|
|
|
# determine if the two freqs are in the same band
|
|
for low, high in rf.valid_bands:
|
|
if f1 >= low and f1 <= high and \
|
|
f2 >= low and f2 <= high:
|
|
# if the two freqs are on the same Band this is not a split
|
|
return False
|
|
|
|
# if you get here is because the freq pairs are split
|
|
return False
|
|
|
|
|
|
class BTech(chirp_common.CloneModeRadio, chirp_common.ExperimentalRadio):
|
|
"""BTECH's UV-5001 and alike radios"""
|
|
VENDOR = "BTECH"
|
|
MODEL = ""
|
|
IDENT = ""
|
|
_vhf_range = (130000000, 180000000)
|
|
_220_range = (210000000, 231000000)
|
|
_uhf_range = (400000000, 521000000)
|
|
_upper = 199
|
|
_magic = MSTRING
|
|
_fileid = None
|
|
_id2 = False
|
|
|
|
@classmethod
|
|
def get_prompts(cls):
|
|
rp = chirp_common.RadioPrompts()
|
|
rp.experimental = \
|
|
('This driver is experimental.\n'
|
|
'\n'
|
|
'Please keep a copy of your memories with the original software '
|
|
'if you treasure them, this driver is new and may contain'
|
|
' bugs.\n'
|
|
'\n'
|
|
)
|
|
rp.pre_download = _(dedent("""\
|
|
Follow these instructions to download your info:
|
|
|
|
1 - Turn off your radio
|
|
2 - Connect your interface cable
|
|
3 - Turn on your radio
|
|
4 - Do the download of your radio data
|
|
|
|
"""))
|
|
rp.pre_upload = _(dedent("""\
|
|
Follow these instructions to upload your info:
|
|
|
|
1 - Turn off your radio
|
|
2 - Connect your interface cable
|
|
3 - Turn on your radio
|
|
4 - Do the upload of your radio data
|
|
|
|
"""))
|
|
return rp
|
|
|
|
def get_features(self):
|
|
"""Get the radio's features"""
|
|
|
|
# we will use the following var as global
|
|
global POWER_LEVELS
|
|
|
|
rf = chirp_common.RadioFeatures()
|
|
rf.has_settings = True
|
|
rf.has_bank = False
|
|
rf.has_tuning_step = False
|
|
rf.can_odd_split = True
|
|
rf.has_name = True
|
|
rf.has_offset = True
|
|
rf.has_mode = True
|
|
rf.has_dtcs = True
|
|
rf.has_rx_dtcs = True
|
|
rf.has_dtcs_polarity = True
|
|
rf.has_ctone = True
|
|
rf.has_cross = True
|
|
rf.valid_modes = MODES
|
|
rf.valid_characters = VALID_CHARS
|
|
rf.valid_name_length = NAME_LENGTH
|
|
rf.valid_duplexes = ["", "-", "+", "split", "off"]
|
|
rf.valid_tmodes = ['', 'Tone', 'TSQL', 'DTCS', 'Cross']
|
|
rf.valid_cross_modes = [
|
|
"Tone->Tone",
|
|
"DTCS->",
|
|
"->DTCS",
|
|
"Tone->DTCS",
|
|
"DTCS->Tone",
|
|
"->Tone",
|
|
"DTCS->DTCS"]
|
|
rf.valid_skips = SKIP_VALUES
|
|
rf.valid_dtcs_codes = DTCS
|
|
rf.memory_bounds = (0, self._upper)
|
|
|
|
# power levels
|
|
if self.MODEL == "UV-5001":
|
|
POWER_LEVELS = UV5001_POWER_LEVELS # Higher power (50W)
|
|
else:
|
|
POWER_LEVELS = NORMAL_POWER_LEVELS # Lower power (25W)
|
|
|
|
rf.valid_power_levels = POWER_LEVELS
|
|
|
|
# bands
|
|
rf.valid_bands = [self._vhf_range, self._uhf_range]
|
|
|
|
# 2501+220
|
|
if self.MODEL == "UV-2501+220":
|
|
rf.valid_bands.append(self._220_range)
|
|
|
|
return rf
|
|
|
|
def sync_in(self):
|
|
"""Download from radio"""
|
|
data = _download(self)
|
|
self._mmap = memmap.MemoryMap(data)
|
|
self.process_mmap()
|
|
|
|
def sync_out(self):
|
|
"""Upload to radio"""
|
|
try:
|
|
_upload(self)
|
|
except errors.RadioError:
|
|
raise
|
|
except Exception, e:
|
|
raise errors.RadioError("Error: %s" % e)
|
|
|
|
def set_options(self):
|
|
"""This is to read the options from the image and set it in the
|
|
environment, for now just the limits of the freqs in the VHF/UHF
|
|
ranges"""
|
|
|
|
# setting the correct ranges for each radio type
|
|
if "+220" in self.MODEL:
|
|
# the model 2501+220 has a segment in 220
|
|
# and a different position in the memmap
|
|
ranges = self._memobj.ranges220
|
|
else:
|
|
ranges = self._memobj.ranges
|
|
|
|
# the normal dual bands
|
|
vhf = _decode_ranges(ranges.vhf_low, ranges.vhf_high)
|
|
uhf = _decode_ranges(ranges.uhf_low, ranges.uhf_high)
|
|
|
|
# DEBUG
|
|
LOG.info("Radio ranges: VHF %d to %d" % vhf)
|
|
LOG.info("Radio ranges: UHF %d to %d" % uhf)
|
|
|
|
# 220Mhz case
|
|
if "+220" in self.MODEL:
|
|
vhf2 = _decode_ranges(ranges.vhf2_low, ranges.vhf2_high)
|
|
LOG.info("Radio ranges: VHF(220) %d to %d" % vhf2)
|
|
self._220_range = vhf2
|
|
|
|
# set the class with the real data
|
|
self._vhf_range = vhf
|
|
self._uhf_range = uhf
|
|
|
|
def process_mmap(self):
|
|
"""Process the mem map into the mem object"""
|
|
|
|
# Get it
|
|
self._memobj = bitwise.parse(MEM_FORMAT, self._mmap)
|
|
|
|
# load specific parameters from the radio image
|
|
self.set_options()
|
|
|
|
def get_raw_memory(self, number):
|
|
return repr(self._memobj.memory[number])
|
|
|
|
def _decode_tone(self, val):
|
|
"""Parse the tone data to decode from mem, it returns:
|
|
Mode (''|DTCS|Tone), Value (None|###), Polarity (None,N,R)"""
|
|
pol = None
|
|
|
|
if val in [0, 65535]:
|
|
return '', None, None
|
|
elif val > 0x0258:
|
|
a = val / 10.0
|
|
return 'Tone', a, pol
|
|
else:
|
|
if val > 0x69:
|
|
index = val - 0x6A
|
|
pol = "R"
|
|
else:
|
|
index = val - 1
|
|
pol = "N"
|
|
|
|
tone = DTCS[index]
|
|
return 'DTCS', tone, pol
|
|
|
|
def _encode_tone(self, memval, mode, val, pol):
|
|
"""Parse the tone data to encode from UI to mem"""
|
|
if mode == '' or mode is None:
|
|
memval.set_raw("\x00\x00")
|
|
elif mode == 'Tone':
|
|
memval.set_value(val * 10)
|
|
elif mode == 'DTCS':
|
|
# detect the index in the DTCS list
|
|
try:
|
|
index = DTCS.index(val)
|
|
if pol == "N":
|
|
index += 1
|
|
else:
|
|
index += 0x6A
|
|
memval.set_value(index)
|
|
except:
|
|
msg = "Digital Tone '%d' is not supported" % value
|
|
LOG.error(msg)
|
|
raise errors.RadioError(msg)
|
|
else:
|
|
msg = "Internal error: invalid mode '%s'" % mode
|
|
LOG.error(msg)
|
|
raise errors.InvalidDataError(msg)
|
|
|
|
def get_memory(self, number):
|
|
"""Get the mem representation from the radio image"""
|
|
_mem = self._memobj.memory[number]
|
|
_names = self._memobj.names[number]
|
|
|
|
# Create a high-level memory object to return to the UI
|
|
mem = chirp_common.Memory()
|
|
|
|
# Memory number
|
|
mem.number = number
|
|
|
|
if _mem.get_raw()[0] == "\xFF":
|
|
mem.empty = True
|
|
return mem
|
|
|
|
# Freq and offset
|
|
mem.freq = int(_mem.rxfreq) * 10
|
|
# tx freq can be blank
|
|
if _mem.get_raw()[4] == "\xFF":
|
|
# TX freq not set
|
|
mem.offset = 0
|
|
mem.duplex = "off"
|
|
else:
|
|
# TX freq set
|
|
offset = (int(_mem.txfreq) * 10) - mem.freq
|
|
if offset != 0:
|
|
if _split(self.get_features(), mem.freq, int(_mem.txfreq) * 10):
|
|
mem.duplex = "split"
|
|
mem.offset = int(_mem.txfreq) * 10
|
|
elif offset < 0:
|
|
mem.offset = abs(offset)
|
|
mem.duplex = "-"
|
|
elif offset > 0:
|
|
mem.offset = offset
|
|
mem.duplex = "+"
|
|
else:
|
|
mem.offset = 0
|
|
|
|
# name TAG of the channel
|
|
mem.name = str(_names.name).rstrip("\xFF").replace("\xFF", " ")
|
|
|
|
# power
|
|
mem.power = POWER_LEVELS[int(_mem.power)]
|
|
|
|
# wide/narrow
|
|
mem.mode = MODES[int(_mem.wide)]
|
|
|
|
# skip
|
|
mem.skip = SKIP_VALUES[_mem.add]
|
|
|
|
# tone data
|
|
rxtone = txtone = None
|
|
txtone = self._decode_tone(_mem.txtone)
|
|
rxtone = self._decode_tone(_mem.rxtone)
|
|
chirp_common.split_tone_decode(mem, txtone, rxtone)
|
|
|
|
# Extra
|
|
mem.extra = RadioSettingGroup("extra", "Extra")
|
|
|
|
scramble = RadioSetting("scramble", "Scramble",
|
|
RadioSettingValueBoolean(bool(_mem.scramble)))
|
|
mem.extra.append(scramble)
|
|
|
|
bcl = RadioSetting("bcl", "Busy channel lockout",
|
|
RadioSettingValueBoolean(bool(_mem.bcl)))
|
|
mem.extra.append(bcl)
|
|
|
|
pttid = RadioSetting("pttid", "PTT ID",
|
|
RadioSettingValueList(PTTID_LIST,
|
|
PTTID_LIST[_mem.pttid]))
|
|
mem.extra.append(pttid)
|
|
|
|
# validating scode
|
|
scode = _mem.scode if _mem.scode != 15 else 0
|
|
pttidcode = RadioSetting("scode", "PTT ID signal code",
|
|
RadioSettingValueList(
|
|
PTTIDCODE_LIST,
|
|
PTTIDCODE_LIST[scode]))
|
|
mem.extra.append(pttidcode)
|
|
|
|
optsig = RadioSetting("optsig", "Optional signaling",
|
|
RadioSettingValueList(
|
|
OPTSIG_LIST,
|
|
OPTSIG_LIST[_mem.optsig]))
|
|
mem.extra.append(optsig)
|
|
|
|
spmute = RadioSetting("spmute", "Speaker mute",
|
|
RadioSettingValueList(
|
|
SPMUTE_LIST,
|
|
SPMUTE_LIST[_mem.spmute]))
|
|
mem.extra.append(spmute)
|
|
|
|
return mem
|
|
|
|
def set_memory(self, mem):
|
|
"""Set the memory data in the eeprom img from the UI"""
|
|
# get the eprom representation of this channel
|
|
_mem = self._memobj.memory[mem.number]
|
|
_names = self._memobj.names[mem.number]
|
|
|
|
# if empty memmory
|
|
if mem.empty:
|
|
# the channel itself
|
|
_mem.set_raw("\xFF" * 16)
|
|
# the name tag
|
|
_names.set_raw("\xFF" * 16)
|
|
return
|
|
|
|
# frequency
|
|
_mem.rxfreq = mem.freq / 10
|
|
|
|
# duplex
|
|
if mem.duplex == "+":
|
|
_mem.txfreq = (mem.freq + mem.offset) / 10
|
|
elif mem.duplex == "-":
|
|
_mem.txfreq = (mem.freq - mem.offset) / 10
|
|
elif mem.duplex == "off":
|
|
for i in _mem.txfreq:
|
|
i.set_raw("\xFF")
|
|
elif mem.duplex == "split":
|
|
_mem.txfreq = mem.offset / 10
|
|
else:
|
|
_mem.txfreq = mem.freq / 10
|
|
|
|
# tone data
|
|
((txmode, txtone, txpol), (rxmode, rxtone, rxpol)) = \
|
|
chirp_common.split_tone_encode(mem)
|
|
self._encode_tone(_mem.txtone, txmode, txtone, txpol)
|
|
self._encode_tone(_mem.rxtone, rxmode, rxtone, rxpol)
|
|
|
|
# name TAG of the channel
|
|
if len(mem.name) < NAME_LENGTH:
|
|
# we must pad to NAME_LENGTH chars, " " = "\xFF"
|
|
mem.name = str(mem.name).ljust(NAME_LENGTH, " ")
|
|
_names.name = str(mem.name).replace(" ", "\xFF")
|
|
|
|
# power, # default power level is high
|
|
_mem.power = 0 if mem.power is None else POWER_LEVELS.index(mem.power)
|
|
|
|
# wide/narrow
|
|
_mem.wide = MODES.index(mem.mode)
|
|
|
|
# scan add property
|
|
_mem.add = SKIP_VALUES.index(mem.skip)
|
|
|
|
# reseting unknowns, this have to be set by hand
|
|
_mem.unknown0 = 0
|
|
_mem.unknown1 = 0
|
|
_mem.unknown2 = 0
|
|
_mem.unknown3 = 0
|
|
_mem.unknown4 = 0
|
|
_mem.unknown5 = 0
|
|
_mem.unknown6 = 0
|
|
|
|
# extra settings
|
|
if len(mem.extra) > 0:
|
|
# there are setting, parse
|
|
for setting in mem.extra:
|
|
setattr(_mem, setting.get_name(), setting.value)
|
|
else:
|
|
# there is no extra settings, load defaults
|
|
_mem.spmute = 0
|
|
_mem.optsig = 0
|
|
_mem.scramble = 0
|
|
_mem.bcl = 0
|
|
_mem.pttid = 0
|
|
_mem.scode = 0
|
|
|
|
return mem
|
|
|
|
def get_settings(self):
|
|
"""Translate the bit in the mem_struct into settings in the UI"""
|
|
_mem = self._memobj
|
|
basic = RadioSettingGroup("basic", "Basic Settings")
|
|
advanced = RadioSettingGroup("advanced", "Advanced Settings")
|
|
other = RadioSettingGroup("other", "Other Settings")
|
|
work = RadioSettingGroup("work", "Work Mode Settings")
|
|
top = RadioSettings(basic, advanced, other, work)
|
|
|
|
# Basic
|
|
tdr = RadioSetting("settings.tdr", "Transceiver dual receive",
|
|
RadioSettingValueBoolean(_mem.settings.tdr))
|
|
basic.append(tdr)
|
|
|
|
sql = RadioSetting("settings.sql", "Squelch level",
|
|
RadioSettingValueInteger(0, 9, _mem.settings.sql))
|
|
basic.append(sql)
|
|
|
|
tot = RadioSetting("settings.tot", "Time out timer",
|
|
RadioSettingValueList(LIST_TOT, LIST_TOT[
|
|
_mem.settings.tot]))
|
|
basic.append(tot)
|
|
|
|
if self.MODEL in ("UV-2501", "UV-2501+220", "UV-5001"):
|
|
apo = RadioSetting("settings.apo", "Auto power off timer",
|
|
RadioSettingValueList(LIST_APO, LIST_APO[
|
|
_mem.settings.apo]))
|
|
basic.append(apo)
|
|
else:
|
|
toa = RadioSetting("settings.apo", "Time out alert timer",
|
|
RadioSettingValueList(LIST_TOA, LIST_TOA[
|
|
_mem.settings.apo]))
|
|
basic.append(toa)
|
|
|
|
abr = RadioSetting("settings.abr", "Backlight timer",
|
|
RadioSettingValueList(LIST_ABR, LIST_ABR[
|
|
_mem.settings.abr]))
|
|
basic.append(abr)
|
|
|
|
beep = RadioSetting("settings.beep", "Key beep",
|
|
RadioSettingValueBoolean(_mem.settings.beep))
|
|
basic.append(beep)
|
|
|
|
dtmfst = RadioSetting("settings.dtmfst", "DTMF side tone",
|
|
RadioSettingValueList(LIST_DTMFST, LIST_DTMFST[
|
|
_mem.settings.dtmfst]))
|
|
basic.append(dtmfst)
|
|
|
|
prisc = RadioSetting("settings.prisc", "Priority scan",
|
|
RadioSettingValueBoolean(_mem.settings.prisc))
|
|
basic.append(prisc)
|
|
|
|
prich = RadioSetting("settings.prich", "Priority channel",
|
|
RadioSettingValueInteger(0, 199,
|
|
_mem.settings.prich))
|
|
basic.append(prich)
|
|
|
|
screv = RadioSetting("settings.screv", "Scan resume method",
|
|
RadioSettingValueList(LIST_SCREV, LIST_SCREV[
|
|
_mem.settings.screv]))
|
|
basic.append(screv)
|
|
|
|
pttlt = RadioSetting("settings.pttlt", "PTT transmit delay",
|
|
RadioSettingValueInteger(0, 30,
|
|
_mem.settings.pttlt))
|
|
basic.append(pttlt)
|
|
|
|
emctp = RadioSetting("settings.emctp", "Alarm mode",
|
|
RadioSettingValueList(LIST_EMCTP, LIST_EMCTP[
|
|
_mem.settings.emctp]))
|
|
basic.append(emctp)
|
|
|
|
emcch = RadioSetting("settings.emcch", "Alarm channel",
|
|
RadioSettingValueInteger(0, 199,
|
|
_mem.settings.emcch))
|
|
basic.append(emcch)
|
|
|
|
ringt = RadioSetting("settings.ringt", "Ring time",
|
|
RadioSettingValueList(LIST_RINGT, LIST_RINGT[
|
|
_mem.settings.ringt]))
|
|
basic.append(ringt)
|
|
|
|
camdf = RadioSetting("settings.camdf", "Display mode A",
|
|
RadioSettingValueList(LIST_MDF, LIST_MDF[
|
|
_mem.settings.camdf]))
|
|
basic.append(camdf)
|
|
|
|
cbmdf = RadioSetting("settings.cbmdf", "Display mode B",
|
|
RadioSettingValueList(LIST_MDF, LIST_MDF[
|
|
_mem.settings.cbmdf]))
|
|
basic.append(cbmdf)
|
|
|
|
if self.MODEL in ("UV-2501", "UV-2501+220", "UV-5001"):
|
|
sync = RadioSetting("settings.sync", "A/B channel sync",
|
|
RadioSettingValueBoolean(_mem.settings.sync))
|
|
basic.append(sync)
|
|
else:
|
|
autolk = RadioSetting("settings.sync", "Auto keylock",
|
|
RadioSettingValueBoolean(_mem.settings.sync))
|
|
basic.append(autolk)
|
|
|
|
ponmsg = RadioSetting("settings.ponmsg", "Power-on message",
|
|
RadioSettingValueList(LIST_PONMSG, LIST_PONMSG[
|
|
_mem.settings.ponmsg]))
|
|
basic.append(ponmsg)
|
|
|
|
wtled = RadioSetting("settings.wtled", "Standby backlight Color",
|
|
RadioSettingValueList(LIST_COLOR, LIST_COLOR[
|
|
_mem.settings.wtled]))
|
|
basic.append(wtled)
|
|
|
|
rxled = RadioSetting("settings.rxled", "RX backlight Color",
|
|
RadioSettingValueList(LIST_COLOR, LIST_COLOR[
|
|
_mem.settings.rxled]))
|
|
basic.append(rxled)
|
|
|
|
txled = RadioSetting("settings.txled", "TX backlight Color",
|
|
RadioSettingValueList(LIST_COLOR, LIST_COLOR[
|
|
_mem.settings.txled]))
|
|
basic.append(txled)
|
|
|
|
anil = RadioSetting("settings.anil", "ANI length",
|
|
RadioSettingValueList(LIST_ANIL, LIST_ANIL[
|
|
_mem.settings.anil]))
|
|
basic.append(anil)
|
|
|
|
reps = RadioSetting("settings.reps", "Relay signal (tone burst)",
|
|
RadioSettingValueList(LIST_REPS, LIST_REPS[
|
|
_mem.settings.reps]))
|
|
basic.append(reps)
|
|
|
|
repm = RadioSetting("settings.repm", "Relay condition",
|
|
RadioSettingValueList(LIST_REPM, LIST_REPM[
|
|
_mem.settings.repm]))
|
|
basic.append(repm)
|
|
|
|
if self.MODEL in ("UV-2501", "UV-2501+220", "UV-5001"):
|
|
tdrab = RadioSetting("settings.tdrab", "TDR return time",
|
|
RadioSettingValueList(LIST_ABR, LIST_ABR[
|
|
_mem.settings.tdrab]))
|
|
basic.append(tdrab)
|
|
|
|
ste = RadioSetting("settings.ste", "Squelch tail eliminate",
|
|
RadioSettingValueBoolean(_mem.settings.ste))
|
|
basic.append(ste)
|
|
|
|
rpste = RadioSetting("settings.rpste", "Repeater STE",
|
|
RadioSettingValueList(LIST_RINGT, LIST_RINGT[
|
|
_mem.settings.rpste]))
|
|
basic.append(rpste)
|
|
|
|
rptdl = RadioSetting("settings.rptdl", "Repeater STE delay",
|
|
RadioSettingValueList(LIST_RPTDL, LIST_RPTDL[
|
|
_mem.settings.rptdl]))
|
|
basic.append(rptdl)
|
|
|
|
# Advanced
|
|
def _filter(name):
|
|
filtered = ""
|
|
for char in str(name):
|
|
if char in VALID_CHARS:
|
|
filtered += char
|
|
else:
|
|
filtered += " "
|
|
return filtered
|
|
|
|
_msg = self._memobj.poweron_msg
|
|
line1 = RadioSetting("poweron_msg.line1", "Power-on message line 1",
|
|
RadioSettingValueString(0, 6, _filter(
|
|
_msg.line1)))
|
|
advanced.append(line1)
|
|
line2 = RadioSetting("poweron_msg.line2", "Power-on message line 2",
|
|
RadioSettingValueString(0, 6, _filter(
|
|
_msg.line2)))
|
|
advanced.append(line2)
|
|
|
|
if self.MODEL in ("UV-2501", "UV-5001"):
|
|
vfomren = RadioSetting("settings2.vfomren", "VFO/MR switching",
|
|
RadioSettingValueBoolean(
|
|
not _mem.settings2.vfomren))
|
|
advanced.append(vfomren)
|
|
|
|
reseten = RadioSetting("settings2.reseten", "RESET",
|
|
RadioSettingValueBoolean(
|
|
_mem.settings2.reseten))
|
|
advanced.append(reseten)
|
|
|
|
menuen = RadioSetting("settings2.menuen", "Menu",
|
|
RadioSettingValueBoolean(
|
|
_mem.settings2.menuen))
|
|
advanced.append(menuen)
|
|
|
|
# Other
|
|
def convert_bytes_to_limit(bytes):
|
|
limit = ""
|
|
for byte in bytes:
|
|
if byte < 10:
|
|
limit += chr(byte + 0x30)
|
|
else:
|
|
break
|
|
return limit
|
|
|
|
if "+220" in self.MODEL:
|
|
_ranges = self._memobj.ranges220
|
|
ranges = "ranges220"
|
|
else:
|
|
_ranges = self._memobj.ranges
|
|
ranges = "ranges"
|
|
|
|
_limit = convert_bytes_to_limit(_ranges.vhf_low)
|
|
val = RadioSettingValueString(0, 3, _limit)
|
|
val.set_mutable(False)
|
|
vhf_low = RadioSetting("%s.vhf_low" % ranges, "VHF low", val)
|
|
other.append(vhf_low)
|
|
|
|
_limit = convert_bytes_to_limit(_ranges.vhf_high)
|
|
val = RadioSettingValueString(0, 3, _limit)
|
|
val.set_mutable(False)
|
|
vhf_high = RadioSetting("%s.vhf_high" % ranges, "VHF high", val)
|
|
other.append(vhf_high)
|
|
|
|
if "+220" in self.MODEL:
|
|
_limit = convert_bytes_to_limit(_ranges.vhf2_low)
|
|
val = RadioSettingValueString(0, 3, _limit)
|
|
val.set_mutable(False)
|
|
vhf2_low = RadioSetting("%s.vhf2_low" % ranges, "VHF2 low", val)
|
|
other.append(vhf2_low)
|
|
|
|
_limit = convert_bytes_to_limit(_ranges.vhf2_high)
|
|
val = RadioSettingValueString(0, 3, _limit)
|
|
val.set_mutable(False)
|
|
vhf2_high = RadioSetting("%s.vhf2_high" % ranges, "VHF2 high", val)
|
|
other.append(vhf2_high)
|
|
|
|
_limit = convert_bytes_to_limit(_ranges.uhf_low)
|
|
val = RadioSettingValueString(0, 3, _limit)
|
|
val.set_mutable(False)
|
|
uhf_low = RadioSetting("%s.uhf_low" % ranges, "UHF low", val)
|
|
other.append(uhf_low)
|
|
|
|
_limit = convert_bytes_to_limit(_ranges.uhf_high)
|
|
val = RadioSettingValueString(0, 3, _limit)
|
|
val.set_mutable(False)
|
|
uhf_high = RadioSetting("%s.uhf_high" % ranges, "UHF high", val)
|
|
other.append(uhf_high)
|
|
|
|
val = RadioSettingValueString(0, 6, _filter(_mem.fingerprint.fp))
|
|
val.set_mutable(False)
|
|
fp = RadioSetting("fingerprint.fp", "Fingerprint", val)
|
|
other.append(fp)
|
|
|
|
# Work
|
|
dispab = RadioSetting("settings2.dispab", "Display",
|
|
RadioSettingValueList(LIST_AB,LIST_AB[
|
|
_mem.settings2.dispab]))
|
|
work.append(dispab)
|
|
|
|
vfomr = RadioSetting("settings2.vfomr", "VFO/MR mode",
|
|
RadioSettingValueList(LIST_VFOMR,LIST_VFOMR[
|
|
_mem.settings2.vfomr]))
|
|
work.append(vfomr)
|
|
|
|
keylock = RadioSetting("settings2.keylock", "Keypad lock",
|
|
RadioSettingValueBoolean(_mem.settings2.keylock))
|
|
work.append(keylock)
|
|
|
|
mrcha = RadioSetting("settings2.mrcha", "MR A channel",
|
|
RadioSettingValueInteger(0, 199,
|
|
_mem.settings2.mrcha))
|
|
work.append(mrcha)
|
|
|
|
mrchb = RadioSetting("settings2.mrchb", "MR B channel",
|
|
RadioSettingValueInteger(0, 199,
|
|
_mem.settings2.mrchb))
|
|
work.append(mrchb)
|
|
|
|
def convert_bytes_to_freq(bytes):
|
|
real_freq = 0
|
|
for byte in bytes:
|
|
real_freq = (real_freq * 10) + byte
|
|
return chirp_common.format_freq(real_freq * 10)
|
|
|
|
def my_validate(value):
|
|
value = chirp_common.parse_freq(value)
|
|
if 180000000 <= value and value < 210000000:
|
|
msg = ("Can't be between 180.00000-210.00000")
|
|
raise InvalidValueError(msg)
|
|
elif 231000000 <= value and value < 400000000:
|
|
msg = ("Can't be between 231.00000-400.00000")
|
|
raise InvalidValueError(msg)
|
|
elif 210000000 <= value and value < 231000000 \
|
|
and "+220" not in self.MODEL:
|
|
msg = ("Can't be between 180.00000-400.00000")
|
|
raise InvalidValueError(msg)
|
|
return chirp_common.format_freq(value)
|
|
|
|
def apply_freq(setting, obj):
|
|
value = chirp_common.parse_freq(str(setting.value)) / 10
|
|
for i in range(7, -1, -1):
|
|
obj.freq[i] = value % 10
|
|
value /= 10
|
|
|
|
val1a = RadioSettingValueString(0, 10, convert_bytes_to_freq(
|
|
_mem.vfo.a.freq))
|
|
val1a.set_validate_callback(my_validate)
|
|
vfoafreq = RadioSetting("vfo.a.freq", "VFO A frequency", val1a)
|
|
vfoafreq.set_apply_callback(apply_freq, _mem.vfo.a)
|
|
work.append(vfoafreq)
|
|
|
|
val1b = RadioSettingValueString(0, 10, convert_bytes_to_freq(
|
|
_mem.vfo.b.freq))
|
|
val1b.set_validate_callback(my_validate)
|
|
vfobfreq = RadioSetting("vfo.b.freq", "VFO B frequency", val1b)
|
|
vfobfreq.set_apply_callback(apply_freq, _mem.vfo.b)
|
|
work.append(vfobfreq)
|
|
|
|
vfoashiftd = RadioSetting("vfo.a.shiftd", "VFO A shift",
|
|
RadioSettingValueList(LIST_SHIFT, LIST_SHIFT[
|
|
_mem.vfo.a.shiftd]))
|
|
work.append(vfoashiftd)
|
|
|
|
vfobshiftd = RadioSetting("vfo.b.shiftd", "VFO B shift",
|
|
RadioSettingValueList(LIST_SHIFT, LIST_SHIFT[
|
|
_mem.vfo.b.shiftd]))
|
|
work.append(vfobshiftd)
|
|
|
|
def convert_bytes_to_offset(bytes):
|
|
real_offset = 0
|
|
for byte in bytes:
|
|
real_offset = (real_offset * 10) + byte
|
|
return chirp_common.format_freq(real_offset * 10000)
|
|
|
|
def apply_offset(setting, obj):
|
|
value = chirp_common.parse_freq(str(setting.value)) / 10000
|
|
for i in range(3, -1, -1):
|
|
obj.offset[i] = value % 10
|
|
value /= 10
|
|
|
|
val1a = RadioSettingValueString(0, 10, convert_bytes_to_offset(
|
|
_mem.vfo.a.offset))
|
|
vfoaoffset = RadioSetting("vfo.a.offset",
|
|
"VFO A offset (0.00-99.95)", val1a)
|
|
vfoaoffset.set_apply_callback(apply_offset, _mem.vfo.a)
|
|
work.append(vfoaoffset)
|
|
|
|
val1b = RadioSettingValueString(0, 10, convert_bytes_to_offset(
|
|
_mem.vfo.b.offset))
|
|
vfoboffset = RadioSetting("vfo.b.offset",
|
|
"VFO B offset (0.00-99.95)", val1b)
|
|
vfoboffset.set_apply_callback(apply_offset, _mem.vfo.b)
|
|
work.append(vfoboffset)
|
|
|
|
vfoatxp = RadioSetting("vfo.a.power", "VFO A power",
|
|
RadioSettingValueList(LIST_TXP,LIST_TXP[
|
|
_mem.vfo.a.power]))
|
|
work.append(vfoatxp)
|
|
|
|
vfobtxp = RadioSetting("vfo.b.power", "VFO B power",
|
|
RadioSettingValueList(LIST_TXP,LIST_TXP[
|
|
_mem.vfo.b.power]))
|
|
work.append(vfobtxp)
|
|
|
|
vfoawide = RadioSetting("vfo.a.wide", "VFO A bandwidth",
|
|
RadioSettingValueList(LIST_WIDE,LIST_WIDE[
|
|
_mem.vfo.a.wide]))
|
|
work.append(vfoawide)
|
|
|
|
vfobwide = RadioSetting("vfo.b.wide", "VFO B bandwidth",
|
|
RadioSettingValueList(LIST_WIDE,LIST_WIDE[
|
|
_mem.vfo.b.wide]))
|
|
work.append(vfobwide)
|
|
|
|
vfoastep = RadioSetting("vfo.a.step", "VFO A step",
|
|
RadioSettingValueList(LIST_STEP,LIST_STEP[
|
|
_mem.vfo.a.step]))
|
|
work.append(vfoastep)
|
|
|
|
vfobstep = RadioSetting("vfo.b.step", "VFO B step",
|
|
RadioSettingValueList(LIST_STEP,LIST_STEP[
|
|
_mem.vfo.b.step]))
|
|
work.append(vfobstep)
|
|
|
|
vfoaoptsig = RadioSetting("vfo.a.optsig", "VFO A optional signal",
|
|
RadioSettingValueList(OPTSIG_LIST,
|
|
OPTSIG_LIST[_mem.vfo.a.optsig]))
|
|
work.append(vfoaoptsig)
|
|
|
|
vfoboptsig = RadioSetting("vfo.b.optsig", "VFO B optional signal",
|
|
RadioSettingValueList(OPTSIG_LIST,
|
|
OPTSIG_LIST[_mem.vfo.b.optsig]))
|
|
work.append(vfoboptsig)
|
|
|
|
vfoaspmute = RadioSetting("vfo.a.spmute", "VFO A speaker mute",
|
|
RadioSettingValueList(SPMUTE_LIST,
|
|
SPMUTE_LIST[_mem.vfo.a.spmute]))
|
|
work.append(vfoaspmute)
|
|
|
|
vfobspmute = RadioSetting("vfo.b.spmute", "VFO B speaker mute",
|
|
RadioSettingValueList(SPMUTE_LIST,
|
|
SPMUTE_LIST[_mem.vfo.b.spmute]))
|
|
work.append(vfobspmute)
|
|
|
|
vfoascr = RadioSetting("vfo.a.scramble", "VFO A scramble",
|
|
RadioSettingValueBoolean(_mem.vfo.a.scramble))
|
|
work.append(vfoascr)
|
|
|
|
vfobscr = RadioSetting("vfo.b.scramble", "VFO B scramble",
|
|
RadioSettingValueBoolean(_mem.vfo.b.scramble))
|
|
work.append(vfobscr)
|
|
|
|
vfoascode = RadioSetting("vfo.a.scode", "VFO A PTT-ID",
|
|
RadioSettingValueList(PTTIDCODE_LIST,
|
|
PTTIDCODE_LIST[_mem.vfo.a.scode]))
|
|
work.append(vfoascode)
|
|
|
|
vfobscode = RadioSetting("vfo.b.scode", "VFO B PTT-ID",
|
|
RadioSettingValueList(PTTIDCODE_LIST,
|
|
PTTIDCODE_LIST[_mem.vfo.b.scode]))
|
|
work.append(vfobscode)
|
|
|
|
pttid = RadioSetting("settings.pttid", "PTT ID",
|
|
RadioSettingValueList(PTTID_LIST,
|
|
PTTID_LIST[_mem.settings.pttid]))
|
|
work.append(pttid)
|
|
|
|
return top
|
|
|
|
def set_settings(self, settings):
|
|
_settings = self._memobj.settings
|
|
for element in settings:
|
|
if not isinstance(element, RadioSetting):
|
|
if element.get_name() == "fm_preset":
|
|
self._set_fm_preset(element)
|
|
else:
|
|
self.set_settings(element)
|
|
continue
|
|
else:
|
|
try:
|
|
name = element.get_name()
|
|
if "." in name:
|
|
bits = name.split(".")
|
|
obj = self._memobj
|
|
for bit in bits[:-1]:
|
|
if "/" in bit:
|
|
bit, index = bit.split("/", 1)
|
|
index = int(index)
|
|
obj = getattr(obj, bit)[index]
|
|
else:
|
|
obj = getattr(obj, bit)
|
|
setting = bits[-1]
|
|
else:
|
|
obj = _settings
|
|
setting = element.get_name()
|
|
|
|
if element.has_apply_callback():
|
|
LOG.debug("Using apply callback")
|
|
element.run_apply_callback()
|
|
elif setting == "vfomren":
|
|
setattr(obj, setting, not int(element.value))
|
|
elif element.value.get_mutable():
|
|
LOG.debug("Setting %s = %s" % (setting, element.value))
|
|
setattr(obj, setting, element.value)
|
|
except Exception, e:
|
|
LOG.debug(element.get_name())
|
|
raise
|
|
|
|
@classmethod
|
|
def match_model(cls, filedata, filename):
|
|
match_size = False
|
|
match_model = False
|
|
|
|
# testing the file data size
|
|
if len(filedata) == MEM_SIZE:
|
|
match_size = True
|
|
|
|
# testing the firmware model fingerprint
|
|
match_model = model_match(cls, filedata)
|
|
|
|
if match_size and match_model:
|
|
return True
|
|
else:
|
|
return False
|
|
|
|
|
|
@directory.register
|
|
class UV2501(BTech):
|
|
"""Baofeng Tech UV2501"""
|
|
MODEL = "UV-2501"
|
|
_fileid = [UV2501G2_fp, UV2501pp2_fp, UV2501pp_fp]
|
|
|
|
|
|
@directory.register
|
|
class UV2501_220(BTech):
|
|
"""Baofeng Tech UV2501+220"""
|
|
MODEL = "UV-2501+220"
|
|
_magic = MSTRING_220
|
|
_fileid = [UV2501_220G2_fp, UV2501_220_fp, UV2501_220pp_fp]
|
|
_id2 = UV2501_220pp_id
|
|
|
|
|
|
@directory.register
|
|
class UV5001(BTech):
|
|
"""Baofeng Tech UV5001"""
|
|
MODEL = "UV-5001"
|
|
_fileid = [UV5001G22_fp, UV5001G2_fp, UV5001alpha_fp, UV5001pp_fp]
|
|
|
|
|
|
@directory.register
|
|
class MINI8900(BTech):
|
|
"""WACCOM MINI-8900"""
|
|
VENDOR = "WACCOM"
|
|
MODEL = "MINI-8900"
|
|
_magic = MSTRING_MINI8900
|
|
_fileid = [MINI8900_fp, ]
|
|
|
|
|
|
@directory.register
|
|
class KTUV980(BTech):
|
|
"""QYT KT-UV980"""
|
|
VENDOR = "QYT"
|
|
MODEL = "KT-UV980"
|
|
_vhf_range = (136000000, 175000000)
|
|
_uhf_range = (400000000, 481000000)
|
|
_magic = MSTRING_MINI8900
|
|
_fileid = [KTUV980_fp, ]
|
|
|
|
|
|
@directory.register
|
|
class KT9800(BTech):
|
|
"""QYT KT8900"""
|
|
VENDOR = "QYT"
|
|
MODEL = "KT8900"
|
|
_vhf_range = (136000000, 175000000)
|
|
_uhf_range = (400000000, 481000000)
|
|
_magic = MSTRING_KT8900
|
|
_fileid = [KT8900_fp, KT8900_fp2, GT890_fp]
|
|
_id2 = KT8900_id
|
|
|
|
|
|
@directory.register
|
|
class GT890(BTech):
|
|
"""Sainsonic GT890"""
|
|
VENDOR = "Sainsonic"
|
|
MODEL = "GT-890"
|
|
# ranges are the same as btech's defaults
|
|
_magic = MSTRING_KT8900
|
|
_fileid = [GT890_fp, KT8900_fp]
|
|
_id2 = KT8900_id
|