|
# Copyright 2010 Eric Allen <eric@hackerengineer.net>
|
|
#
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 3 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
import time
|
|
import os
|
|
|
|
from chirp import chirp_common, directory, bitwise, errors
|
|
from chirp.drivers import yaesu_clone
|
|
|
|
TONES = chirp_common.OLD_TONES
|
|
|
|
TMODES = ["", "Tone"]
|
|
|
|
MODES = ['FM', 'AM']
|
|
|
|
STEPS = [5.0, 10.0, 12.5, 15.0, 20.0, 25.0, 50.0]
|
|
|
|
DUPLEX = ["", "-", "+", "split"]
|
|
|
|
# "M" for masked memories, which are invisible until un-masked
|
|
SKIPS = ["", "S", "M"]
|
|
|
|
POWER_LEVELS_VHF = [chirp_common.PowerLevel("Low", watts=5),
|
|
chirp_common.PowerLevel("Mid", watts=20),
|
|
chirp_common.PowerLevel("High", watts=50)]
|
|
|
|
POWER_LEVELS_UHF = [chirp_common.PowerLevel("Low", watts=5),
|
|
chirp_common.PowerLevel("Mid", watts=20),
|
|
chirp_common.PowerLevel("High", watts=35)]
|
|
|
|
SPECIALS = {'1L': -1,
|
|
'1U': -2,
|
|
'2L': -3,
|
|
'2U': -4,
|
|
'Home': -5}
|
|
|
|
MEM_FORMAT = """
|
|
#seekto 0x{skips:X};
|
|
u8 skips[13];
|
|
|
|
#seekto 0x{enables:X};
|
|
u8 enables[13];
|
|
|
|
struct mem_struct {{
|
|
u8 unknown4:2,
|
|
baud9600:1,
|
|
am:1,
|
|
unknown4b:4;
|
|
u8 power:2,
|
|
duplex:2,
|
|
unknown1b:4;
|
|
u8 unknown2:1,
|
|
tone_enable:1,
|
|
tone:6;
|
|
bbcd freq[3];
|
|
bbcd offset[3];
|
|
}};
|
|
|
|
#seekto 0x{memories:X};
|
|
struct mem_struct memory[99];
|
|
"""
|
|
|
|
|
|
@directory.register
|
|
class FT8100Radio(yaesu_clone.YaesuCloneModeRadio):
|
|
"""Implementation for Yaesu FT-8100"""
|
|
MODEL = "FT-8100"
|
|
|
|
_memstart = 0
|
|
_memsize = 2968
|
|
_block_lengths = [10, 32, 114, 101, 101, 97, 128, 128, 128, 128, 128, 9, 9,
|
|
9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9,
|
|
9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9,
|
|
9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9,
|
|
9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9,
|
|
9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9,
|
|
9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9,
|
|
9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9,
|
|
9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9,
|
|
9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9,
|
|
9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9,
|
|
9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 1]
|
|
|
|
@classmethod
|
|
def match_model(cls, data, path):
|
|
if (len(data) == cls._memsize and
|
|
data[1:10] == '\x01\x01\x07\x08\x02\x01\x01\x00\x01'):
|
|
return True
|
|
|
|
return False
|
|
|
|
def get_features(self):
|
|
rf = chirp_common.RadioFeatures()
|
|
rf.memory_bounds = (1, 99)
|
|
rf.has_ctone = False
|
|
rf.has_dtcs = False
|
|
rf.has_dtcs_polarity = False
|
|
rf.has_bank = False
|
|
rf.has_name = False
|
|
|
|
rf.valid_modes = list(MODES)
|
|
rf.valid_tmodes = list(TMODES)
|
|
rf.valid_duplexes = list(DUPLEX)
|
|
rf.valid_power_levels = POWER_LEVELS_VHF
|
|
rf.has_sub_devices = self.VARIANT == ''
|
|
|
|
rf.valid_tuning_steps = list(STEPS)
|
|
|
|
rf.valid_bands = [(110000000, 550000000),
|
|
(750000000, 1300000000)]
|
|
|
|
rf.valid_skips = SKIPS
|
|
|
|
rf.can_odd_split = True
|
|
|
|
# TODO
|
|
# rf.valid_special_chans = SPECIALS.keys()
|
|
|
|
# TODO
|
|
# rf.has_tuning_step = False
|
|
return rf
|
|
|
|
def sync_in(self):
|
|
super(FT8100Radio, self).sync_in()
|
|
self.pipe.write(yaesu_clone.CMD_ACK)
|
|
self.pipe.read(1)
|
|
|
|
def sync_out(self):
|
|
self.update_checksums()
|
|
return _clone_out(self)
|
|
|
|
def process_mmap(self):
|
|
if not self._memstart:
|
|
return
|
|
|
|
mem_format = MEM_FORMAT.format(memories=self._memstart,
|
|
skips=self._skipstart,
|
|
enables=self._enablestart
|
|
)
|
|
|
|
self._memobj = bitwise.parse(mem_format, self._mmap)
|
|
|
|
def get_sub_devices(self):
|
|
return [FT8100RadioVHF(self._mmap), FT8100RadioUHF(self._mmap)]
|
|
|
|
def get_memory(self, number):
|
|
bit, byte = self._bit_byte(number)
|
|
|
|
_mem = self._memobj.memory[number - 1]
|
|
|
|
mem = chirp_common.Memory()
|
|
mem.number = number
|
|
|
|
mem.freq = int(_mem.freq) * 1000
|
|
if _mem.tone >= len(TONES) or _mem.duplex >= len(DUPLEX):
|
|
mem.empty = True
|
|
return mem
|
|
else:
|
|
mem.rtone = TONES[_mem.tone]
|
|
mem.tmode = TMODES[_mem.tone_enable]
|
|
mem.mode = MODES[_mem.am]
|
|
mem.duplex = DUPLEX[_mem.duplex]
|
|
|
|
if _mem.duplex == DUPLEX.index("split"):
|
|
tx_freq = int(_mem.offset) * 1000
|
|
print(self.VARIANT, number, tx_freq, mem.freq)
|
|
mem.offset = tx_freq - mem.freq
|
|
else:
|
|
mem.offset = int(_mem.offset) * 1000
|
|
|
|
if int(mem.freq / 100) == 4:
|
|
mem.power = POWER_LEVELS_UHF[_mem.power]
|
|
else:
|
|
mem.power = POWER_LEVELS_VHF[_mem.power]
|
|
|
|
# M01 can't be disabled
|
|
if not self._memobj.enables[byte] & bit and number != 1:
|
|
mem.empty = True
|
|
|
|
print('R', self.VARIANT, number, _mem.baud9600)
|
|
|
|
return mem
|
|
|
|
def get_raw_memory(self, number):
|
|
return repr(self._memobj.memory[number - 1])
|
|
|
|
def set_memory(self, mem):
|
|
bit, byte = self._bit_byte(mem.number)
|
|
|
|
_mem = self._memobj.memory[mem.number - 1]
|
|
|
|
_mem.freq = int(mem.freq / 1000)
|
|
_mem.tone = TONES.index(mem.rtone)
|
|
_mem.tone_enable = TMODES.index(mem.tmode)
|
|
_mem.am = MODES.index(mem.mode)
|
|
_mem.duplex = DUPLEX.index(mem.duplex)
|
|
|
|
if mem.duplex == "split":
|
|
tx_freq = mem.freq + mem.offset
|
|
_mem.split_high = tx_freq / 10000000
|
|
_mem.offset = (tx_freq % 10000000) / 1000
|
|
else:
|
|
_mem.offset = int(mem.offset / 1000)
|
|
|
|
if mem.power:
|
|
_mem.power = POWER_LEVELS_VHF.index(mem.power)
|
|
else:
|
|
_mem.power = 0
|
|
|
|
if mem.empty:
|
|
self._memobj.enables[byte] &= ~bit
|
|
else:
|
|
self._memobj.enables[byte] |= bit
|
|
|
|
# TODO expose these options
|
|
_mem.baud9600 = 0
|
|
_mem.am = 0
|
|
|
|
# These need to be cleared, otherwise strange things happen
|
|
_mem.unknown4 = 0
|
|
_mem.unknown4b = 0
|
|
_mem.unknown1b = 0
|
|
_mem.unknown2 = 0
|
|
|
|
def _checksums(self):
|
|
return [yaesu_clone.YaesuChecksum(0x0000, 0x0B96)]
|
|
|
|
# I didn't believe this myself, but it seems that there's a bit for
|
|
# enabling VHF M01, but no bit for UHF01, and the enables are shifted down,
|
|
# so that the first bit is for M02
|
|
def _bit_byte(self, number):
|
|
if self.VARIANT == 'VHF':
|
|
bit = 1 << ((number - 1) % 8)
|
|
byte = (number - 1) / 8
|
|
else:
|
|
bit = 1 << ((number - 2) % 8)
|
|
byte = (number - 2) / 8
|
|
|
|
return bit, byte
|
|
|
|
|
|
class FT8100RadioVHF(FT8100Radio):
|
|
"""Yaesu FT-8100 VHF subdevice"""
|
|
VARIANT = "VHF"
|
|
_memstart = 0x447
|
|
_skipstart = 0x02D
|
|
_enablestart = 0x04D
|
|
|
|
|
|
class FT8100RadioUHF(FT8100Radio):
|
|
"""Yaesu FT-8100 UHF subdevice"""
|
|
VARIANT = "UHF"
|
|
_memstart = 0x7E6
|
|
_skipstart = 0x03A
|
|
_enablestart = 0x05A
|
|
|
|
|
|
def _clone_out(radio):
|
|
try:
|
|
return __clone_out(radio)
|
|
except Exception as e:
|
|
raise errors.RadioError("Failed to communicate with the radio: %s" % e)
|
|
|
|
|
|
def __clone_out(radio):
|
|
pipe = radio.pipe
|
|
block_lengths = radio._block_lengths
|
|
total_written = 0
|
|
|
|
def _status():
|
|
status = chirp_common.Status()
|
|
status.msg = "Cloning to radio"
|
|
status.max = sum(block_lengths)
|
|
status.cur = total_written
|
|
radio.status_fn(status)
|
|
|
|
start = time.time()
|
|
|
|
pos = 0
|
|
for block in radio._block_lengths:
|
|
if os.getenv("CHIRP_DEBUG"):
|
|
print("\nSending %i-%i" % (pos, pos + block))
|
|
out = radio.get_mmap()[pos:pos + block]
|
|
|
|
# need to chew byte-by-byte here or else we lose the ACK...not sure why
|
|
for b in out:
|
|
pipe.write(bytes([b]))
|
|
pipe.read(1) # chew the echo
|
|
|
|
ack = pipe.read(1)
|
|
|
|
if ack != yaesu_clone.CMD_ACK:
|
|
raise Exception("block not ack'ed: %s" % repr(ack))
|
|
|
|
total_written += len(out)
|
|
_status()
|
|
|
|
pos += block
|
|
|
|
print("Clone completed in %i seconds" % (time.time() - start))
|
|
|
|
return True
|