Project

General

Profile

Actions

Bug #10158

closed

ANI-ID

Added by DENNIS KINDA about 2 years ago. Updated about 2 years ago.

Status:
Closed
Priority:
Normal
Assignee:
Category:
-
Target version:
Start date:
12/04/2022
Due date:
% Done:

100%

Estimated time:
Chirp Version:
daily
Model affected:
BTECH GMRS-V2
Platform:
Windows
Debug Log:
I read the instructions above:

Description

Unable to change the ANI-ID on new BTECH GMRS V-2


Files

debug.log (165 KB) debug.log DENNIS KINDA, 12/04/2022 11:10 PM
Actions #1

Updated by Jim Unroe about 2 years ago

  • Status changed from New to In Progress
  • Assignee set to Jim Unroe
  • Model affected changed from BTECH GMRS V-2 to BTECH GMRS-V2 MURS-V2

The reason it doesn't work is because support was removed from the radio. When I get a chance I will remove the following settings from the driver (affects both the BTECH GMRS-V2 and BTECH MURS-V2).

DTMF Speed (on)
DTMF Speed (off)
ANI Code
When to send ANI ID
Alarm Code

No programming software is able to make a radio do anything it is not capable of doing. You will just have to use the per-channel Signal Code 1-15 settings (which are otherwise the same as the global ANI Code). Plus the ANI Code (when supported) must be piggybacked on top of a Signal Code to function. The ANI Code is only useful if you want the "PTT Pressed" and "PTT Released" codes to be globally different. So unless this is your goal, the lack of an ANI Code should not be missed.

Jim KC9HI

Actions #2

Updated by Jim Unroe about 2 years ago

  • Model affected changed from BTECH GMRS-V2 MURS-V2 to BTECH GMRS-V2

After contacting the dealer, it was determined that it is only the OEM software that (accidentally?) had the DTMF settings (including the ANI Code) disabled. After getting a functioning copy of the OEM software, I was able to determine what is needed to change in order to have CHIRP able to program the rest of the DTMF settings. A patch will be coming soon.

Jim KC9HI

Actions #3

Updated by Jim Unroe about 2 years ago

  • Status changed from In Progress to Resolved
  • % Done changed from 0 to 100

Patch submitted. Support will be in the next CHIRP daily build following acceptance.

Jim KC9HI

Actions #4

Updated by Anonymous about 2 years ago

  • Status changed from Resolved to Closed

Applied in changeset commit:aa7a836abfe4.

Actions

Also available in: Atom PDF