Project

General

Profile

Actions

Bug #10726

closed

Retevis RA685

Added by Eddi Wolf over 1 year ago. Updated over 1 year ago.

Status:
Resolved
Priority:
Normal
Assignee:
Category:
-
Target version:
Start date:
07/16/2023
Due date:
% Done:

100%

Estimated time:
Chirp Version:
next
Model affected:
Retevis RA85 and RA685
Platform:
Windows
Debug Log:
I read the instructions above:

Description

Hallo, ich habe ein Retevis RA685 was in Europa nur für 144-146 und 430 - 440 Mhz zugelassen ist. In der Stellung "Factory" kann auch VHF: 136 - 174MHz; UHF 400 - 520MHz programmiert programmiert und gesendet werden.
Bei Programmierung mit Chirp wird auserhalb von 144-146 und 430-440 Mhz das Senden gesperrt und Duplex auf "off" gestellt. kann man dies abändern?
Mit der Software "WLT-UV5F PLUS PRO" von Abbree ist dieses ohne Probleme möglich.
Gruss Eddi


Files

ch1.jpg (32 KB) ch1.jpg Eddi Wolf, 07/16/2023 12:24 AM
ch1.jpg (32 KB) ch1.jpg Eddi Wolf, 07/16/2023 12:26 AM
Actions #1

Updated by Eddi Wolf over 1 year ago

Eddi Wolf wrote:

Hallo, ich habe ein Retevis RA685 was in Europa nur für 144-146 und 430 - 440 Mhz zugelassen ist. In der Stellung "Factory" kann auch VHF: 136 - 174MHz; UHF 400 - 520MHz programmiert programmiert und gesendet werden.
Bei Programmierung mit Chirp wird auserhalb von 144-146 und 430-440 Mhz das Senden gesperrt und Duplex auf "off" gestellt. kann man dies abändern?
Mit der Software "WLT-UV5F PLUS PRO" von Abbree ist dieses ohne Probleme möglich.
Gruss Eddi

Hello, I have a Retevis RA685 which is only approved for 144-146 and 430-440 Mhz in Europe. In the "Factory" setting, VHF: 136 - 174MHz; UHF 400 - 520MHz programmed and broadcast.
When programming with chirp, transmission is blocked outside of 144-146 and 430-440 Mhz and duplex is set to "off". can this be changed?
With the software "WLT-UV5F PLUS PRO" from Abbree this is possible without any problems.
Greetings Eddie

Actions #2

Updated by Jim Unroe over 1 year ago

  • Status changed from New to In Progress
  • Assignee set to Jim Unroe
  • Target version set to chirp-py3
  • Model affected changed from Retevis RA685 to Retevis RA85 and RA685

I will work on an update to remove these restrictions. Applies to Retevis RA85 and RA685.

Jim KC9HI

Actions #3

Updated by Jim Unroe over 1 year ago

  • Status changed from In Progress to Resolved
  • % Done changed from 0 to 100

A patch has been submitted. Support will be in the CHIRP-next build following acceptance.

Jim KC9HI

Actions #4

Updated by Eddi Wolf over 1 year ago

Thanks Jim, the programming is working great now.
I can enter all frequencies on my RA685.
Now also works seamlessly with the ABBREE AR-F5. Only the programming of the side buttons is not adopted.
top work.
Greetings Eddi DG5JN

Actions #5

Updated by Jim Unroe over 1 year ago

Eddi Wolf wrote in #note-4:

Thanks Jim, the programming is working great now.
I can enter all frequencies on my RA685.
Now also works seamlessly with the ABBREE AR-F5. Only the programming of the side buttons is not adopted.
top work.
Greetings Eddi DG5JN

Please explain what you mean about the side keys. Are you saying that the side key setting should be removed for the AR-F5? Or just for the bottom button because the top works?

Thanks,
Jim KC9HI

Actions #6

Updated by Eddi Wolf over 1 year ago

Hello Jim,
With my AR-F5, the programming of the side buttons is not taken over. That's not a problem for me, just a hint for you.
Greetings
Eddie
DG5JN

Actions

Also available in: Atom PDF