Bug #11147
openGT-3WP errata: 6-char channel names, MR B channel set incorrectly
0%
Description
Hello,
I'm having a number of problems with a particular Baofeng GT-3WP which I bought used on ebay. It is only displaying 6 characters of channel names which have 7, and when setting the MR B channel, the setting actually programmed to the radio is incorrect. There are a number of other subtle issues, please let me know if you need further description.
I'm including a debug.log which I generated with the --log command line switch, because CHIRP was not generating one in ~/.chirp, and there was no option for one which I could see in the help menu.
I'm also including a backup of the radio I took before doing anything to it, after it arrived in the mail.
It should be noted that a different GT-3WP which I just received works fine and does not have the same issues - so far it appears to only be the 1 particular unit.
Based on what I was told on the mailing list, I'm guessing that this radio was improperly programmed before I got it??
STEPS TO REPRODUCE
Load the Baofeng_GT-3WP_20240207_first_unit_TEST.img file and upload it to the particular radio in question.
WHAT I EXPECT TO HAPPEN
The radio to work similarly to how other units I have work, after being programmed.
WHAT ACTUALLY HAPPENED
- 7-character channel names only displayed with 6 characters
- MR B channel set incorrectly
- strange behavior such as always starting on original channels rather than what was selected when radio powered off
Files
Updated by Deuterous Ino 10 months ago
I should also note that Baofeng_GT-3WP_20240207_first_unit_TEST.img was created by starting with Baofeng_GT-3WP_NOTSTOCK_20240111_on_arrival_from_ebay.img and then pasting in the channel scheme and manually setting the various settings.
Updated by Deuterous Ino 9 months ago
There are additional quirks beyond those mentioned above. Just general strange behavior, which now that I am a little more knowledgeable, do sound a lot like this radio was programmed using a .img from a different unit sometime before I purchased it secondhand.
From what I understand, there is a repo somewhere of .imgs to go with certain models and firmware versions? But, I don't know how to go about finding a .img for my particular unit if indeed one exists. I don't know where the repo is or how to figure out which img would be correct.