Project

General

Profile

Actions

Bug #1143

closed

Boafeng BF-888S - Settings Menu

Added by John LaMartina about 11 years ago. Updated almost 11 years ago.

Status:
Closed
Priority:
Normal
Assignee:
Category:
-
Target version:
Start date:
09/19/2013
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
BF-888S
Platform:
All
Debug Log:
I read the instructions above:

Description

BF-888S Settings Tab corrections:

FM FUNCTION should be eliminated.

  • The 888S does not have an FM radio.
  • If Checked, however, it will prevent radio from scanning.

VOX LEVEL should read 1>5 not 0>4

  • Zero implies OFF
  • This also makes it compatible with factory software

Low Volume Inhibit TX / High Volume Inhibit TX

  • I believe this should read
  • Low Voltage Inhibit TX / High Voltage Inhibit TX

Thanks,
John K3NXU
http://www.miklor.com/BF888

Actions #1

Updated by John LaMartina about 11 years ago

Additional Observation:

The Sidekey 1 function has no effect on the radio.
It does not change the radios parameters
None
Hi/Lo power
Emergency Alarm
Momentary Monitor

Actions #2

Updated by Jim Unroe almost 11 years ago

  • Status changed from New to Closed
  • Assignee set to Jim Unroe
  • Target version set to 0.4.0
  • Platform changed from Windows to All

Except for the FM Function, the requested changes are in the latest daily build.

The FM Function is equivalent to the same setting in the Baofeng software for the BF-888s and provided the same functionality (although it may be broken).

Jim KC9HI

Actions

Also available in: Atom PDF