Bug #1891
openUnable to copy/paste memories on FT-8800R
0%
Description
Have an FT-8800R and wanted to duplicate the left side memories on the right side. Can do a CTRL-A and select all and then attempt a copy (either by pull down menu or by right clicking and selecting copy).
But when I attempt to paste - (either by pull down menu or by right clicking and selecting paste), no paste. No joy.
Updated by Tom Hayward over 10 years ago
I think this is a regression from #739.
It seems to only affect copying from one side of a radio to the other. It does not affect copying to and from other models of radio, or copying within one side of a radio.
A temporary workaround would be to paste everything into a CSV (Ctrl-N) or other radio, then copy the CSV, then paste back into the other side of the radio.
Updated by Brian Basura almost 10 years ago
Just wondering if any progress has been made on this? Thanks!
Updated by Jon Blackwell almost 9 years ago
Another work around I found:
I was building a file for my friend with a FT-8800 and could not copy from one side to the other. I had done so previously as I also have a FT-8800. I saved his file with only one side containing any repeater info. I then opened up his file so that both tabs contained the same file. I could then copy from the right side of one file to the left side on the other file. Re-save and you have a complete left and right file.
Updated by Bernhard Hailer over 4 years ago
- Status changed from New to Feedback
- Target version changed from 0.4.1 to chirp-legacy
- Chirp Version changed from 0.4.0 to daily
- Model affected changed from (All models) to Yaesu FT-8800R
Is this still an issue with current versions of Chirp? Thanks!