Bug #1901

FT857 Split Tone does not work

Added by Predrag Supurovic over 6 years ago. Updated over 6 years ago.

Status:Closed Start date:09/11/2014
Priority:Normal Due date:
Assignee:Filippi Marco % Done:

100%

Category:-
Target version:-
Chirp Version:daily Platform:All
Model affected:FT857/897

Description

I noticed that this bug has been reported before ans marked as resolved (http://chirp.danplanet.com/issues/100).

Yet, I stumbled on a problem.

I've set split tone for a repeater in a manner that rig sends tone to open repeater but does not expect tone on receive.

I did that this way:

Set RX/TX frequencies for a repeater, then enabled split tone using menu No079, then set split tone to 123.0 Hz using menu No083, and after thet use menu MFe and option ENC to turn Tone on TX (set option to T).

I checked everything works as expected - rig opens repeater and receives it properly. I saved it to memory location 11 named TEST.

Then I tried to download configuration to Chirp. It reported error on that memory location and all values for the record are reset to default.

I also found out that Chirp actually has no options to set split tone in this manner and I guess this is the cause of the problem. It allows setting split as >Tone but not Tone> which I actually configured in rig directly.

ft857d-chirp-bug-report.img - downloaded data from device which shows error (7.2 kB) Predrag Supurovic, 09/11/2014 03:57 am

debug.log - debug log (15.8 kB) Predrag Supurovic, 09/11/2014 03:57 am


Related issues

related to Bug #1909: Some empty memories are displayed as "error" Closed 09/14/2014

Associated revisions

Revision 2263:c2092a568154
Added by Filippi Marco over 6 years ago

[UI] add "tone->" to acceptable cross tone mode

needed for #1901

Revision 2265:3ce3e69a07d1
Added by Filippi Marco over 6 years ago

[thd8102] specify valid cross tone modes

The list of valid cross tone modes is changed in UI and can change again in the
future, we have to specify the correct list for each radio

side effect of fix for #1901

Revision 2264:d5d96a2fb832
Added by Filippi Marco over 6 years ago

[bf888] specify valid cross tone modes

The list of valid cross tone modes is changed in UI and can change again in the
future, we have to specify the correct list for each radio

side effect of fix for #1901

Revision 2266:79d6fef85d32
Added by Filippi Marco over 6 years ago

[ft857] add "tone->" to acceptable cross tone mode

fix #1901

History

Updated by Filippi Marco over 6 years ago

  • Status changed from New to In Progress
  • Assignee set to Filippi Marco
  • Model affected changed from FT857D to FT857/897
  • Platform changed from Windows to All

Updated by Filippi Marco over 6 years ago

  • Status changed from In Progress to Feedback

I sent a fix to developers list for inclusion in upcoming daily build.

Loading your image I've seen some other memories that are marked as error, can you please confirm that locations 120, 189 and 190 are actually seen as empty in the radio?
After your feedback I'll open a different issue to fix them.

Tnx
73 de IZ3GME Marco

Updated by Filippi Marco over 6 years ago

  • % Done changed from 0 to 100

Updated by Predrag Supurovic over 6 years ago

Great! Thanks!

I confirm, locations locations 120, 189 and 190 are empty in radio.

73 Pedja

Updated by Filippi Marco over 6 years ago

  • Status changed from Feedback to Resolved

Updated by Predrag Supurovic over 6 years ago

The last Daily build is dated to 13.09. it does not contain this fix.

Updated by Filippi Marco over 6 years ago

I'm sorry for delay but my patches have not been pushed to build system yet, probably our "team leader" is busy on work.
Usually it takes not more then a week so please be patient and keep on looking for next daily.

73 de IZ3GME Marco

Updated by Filippi Marco over 6 years ago

  • Status changed from Resolved to Closed

New daily build is out

Also available in: Atom PDF