Project

General

Profile

Actions

Bug #1917

closed

[UV-B5] Settings 'STE' and 'beep prompt' invert when changing setting 'save mode'

Added by Bertrik Sikken over 9 years ago. Updated over 9 years ago.

Status:
Closed
Priority:
Normal
Assignee:
Category:
-
Target version:
Start date:
09/20/2014
Due date:
% Done:

100%

Estimated time:
Chirp Version:
daily
Model affected:
UV-B5
Platform:
All
Debug Log:
I read the instructions above:

Description

When I change the setting 'save mode', two other settings ('STE' and 'beep prompt') change too.
In the code I see those two settings are a bit special, in hardware you have to set a bit to disable them.
There seems to be logic present already to handle this, but the mechanism does not fully work apparently.

To reproduce:

  • Disable 'STE' and 'beep prompt' manually on the radio. Enable 'save mode' manually on the radio.
  • Download from the radio in chirp
  • Change setting 'save mode' from off to on.
  • Upload to the radio in chirp
  • Download from the radio in chirp again
  • Observe that the settings 'STE' and 'beep prompt' are now enabled.
  • Observe that the 'beep prompt' icon on the radio display is showing.
Actions #1

Updated by Jim Unroe over 9 years ago

  • Status changed from New to In Progress
  • Assignee set to Jim Unroe
  • Target version set to 0.4.1
  • % Done changed from 0 to 100
  • Model affected changed from (All models) to UV-B5
  • Platform changed from Linux to All

Bertrik,

Thanks for the clear and concise steps to reproduce this bug. A patch will be submitted soon.

Jim KC9HI

Actions #2

Updated by Jim Unroe over 9 years ago

Patch submitted.

Jim KC9HI

Actions #3

Updated by Bertrik Sikken over 9 years ago

I confirm it works as expected now, thanks for the quick fix!

Actions #4

Updated by Jim Unroe over 9 years ago

  • Status changed from In Progress to Closed

New daily build is out

Actions

Also available in: Atom PDF