Feature #1945

[FT-60] Feature Request: Memory Bank Support

Added by Patrick Lang over 6 years ago. Updated about 6 years ago.

Status:Closed Start date:10/02/2014
Priority:Normal Due date:
Assignee:Kosta A. % Done:

100%

Category:-
Target version:-
Chirp Version:daily Model affected:FT-60

Description

With the large 1000 memory bank, I would like to be able to assign them to memory banks on my FT-60. I did some digging in the source, and it looks like some other models such as the VX-8 support this. Has anyone looked into this?

I'm willing to help out with code or testing if someone can provide "known good" files for another model supporting banks.

Associated revisions

Revision 2315:df48657d3d5b
Added by Kosta A. about 6 years ago

[FT-60] Add Memory Bank Support

Implments a basic BankModel for Yaesu FT-60r in support of memory at address 0x69C8.

Bug #1945
Bug #675

Revision 2321:5c8cf7aa6ab3
Added by Dan Smith about 6 years ago

Revert: [FT-60] Add Memory Bank Support

Implments a basic BankModel for Yaesu FT-60r in support of memory at address 0x69C8.

Bug #1945
Bug #675

Revision 2329:ffcb904af53a
Added by Kosta A. about 6 years ago

[FT-60] Add Memory Bank Support

Implments a basic BankModel for Yaesu FT-60r in support of memory at address 0x69C8.

Bug #1945
Bug #675

Revision 2347:879a2f58b090
Added by Kosta A. about 6 years ago

[FT-60] Memory Bank Link Scan
Added settings support for memory bank link scan.
Extended bitwise int data element to support xor operator.
Note: The mbs settings are stored in the 16 bits located at
memory location 0x09E in the high order bits.
Note: A bank can be linked even if it contains no memories.
In this case the radio ignores it during the mbl scan.
Bug #675
Bug #1945

History

Updated by Patrick Lang over 6 years ago

For example:
Today I have repeaters in my local area +100 miles in memory slots <100. I have the next few counties over in 100-200. Areas I frequently travel to out of state are each in higher ranges.

If I can assign these to banks, it would be easy to scan only relevant repeaters as I travel.

Updated by Patrick Lang about 6 years ago

I'm working on a patch for this, almost done!

Updated by Kosta A. about 6 years ago

  • Status changed from New to In Progress
  • Assignee set to Kosta A.
  • % Done changed from 0 to 90

Support for memory banks added in r2315;

I will also be submitting a patch supporting memory bank scan settings now that settings support has been added.

Updated by Kosta A. about 6 years ago

  • Status changed from In Progress to Resolved
  • % Done changed from 90 to 100

Resolved in r2347 which also added ability to tune MBLS.

Resolving this bug as general FT60 memory bank support is
now supported.

Any requests for specific settings requests should be filled as
individual feature requests.

Updated by Kosta A. about 6 years ago

  • Status changed from Resolved to Closed

Also available in: Atom PDF