Bug #2041
Squelch
| Status: | Feedback | Start date: | 11/10/2014 | |
|---|---|---|---|---|
| Priority: | Normal | Due date: | ||
| Assignee: | - | % Done: | 0% |
|
| Category: | - | |||
| Target version: | chirp-daily | |||
| Chirp Version: | daily | Platform: | Windows | |
| Model affected: | Baofeng UV-82 |
Description
CHIRP daily-20141025
Firmware in Radio 82 is b82S25
When I upload to Radio VHF works fine
but the Squelch carrier level changes from .2 uvolts to 1 uvolts well the setting still reads (1)
I have three radios they all do the same thing
when i reset the VFO and punch in frequencies and remeasure it is back to normal
If I turn off the COS and use pl tone I can hear signals in the noise like I should
but the Carrier squelch is rather useless with starting set at 1 u microvolt
History
Updated by Bernhard Hailer about 1 year ago
- Status changed from New to Feedback
- Target version set to chirp-daily
- Model affected changed from Baofeng 82 to Baofeng UV-82
This ticket has been opened a long time ago. Did you try a newer Chirp version?