Project

General

Profile

Actions

Bug #24

closed

ID-880h Frequency corruption Issue

Added by William Mogan about 13 years ago. Updated over 12 years ago.

Status:
Closed
Priority:
Normal
Assignee:
-
Category:
-
Target version:
Start date:
11/05/2011
Due date:
% Done:

0%

Estimated time:
Chirp Version:
0.1.12
Model affected:
ID-880h
Platform:
Windows
Debug Log:
I read the instructions above:

Description

Started with fresh radio image. Imported long list of repeaters and scanning freqs.
Chirp changed some of the frequencies - it appears to be anything that required 4 digits after the decimal point - .8375, .5625, .7125
Memories that were corrupted were shifted about 92.5 Mhz downward, then a slight offset based on the frequency originally was.

445.8375 became 356.67
FRS 1 at 462.5625 became 370.05

Can't speak to this bug on other radio models.

The program will upload the corrupted list to the radio, which accepts it. As long as there are not 4 digits after the decimal, the program works fine.

Actions #1

Updated by Dan Smith almost 13 years ago

  • Status changed from New to Closed

Thanks for catching that. This is fixed in the tree (r1220) and will be in tomorrow's daily build. Please report back if it doesn't solve the problem.

Actions #2

Updated by Dan Smith over 12 years ago

  • Target version set to 0.2.0
Actions

Also available in: Atom PDF