Project

General

Profile

Actions

Feature #285

closed

Wouxun.us KG-UV6D Frequencies

Added by Chuck Burton over 11 years ago. Updated over 11 years ago.

Status:
Closed
Priority:
Normal
Assignee:
Category:
-
Target version:
-
Start date:
08/31/2012
Due date:
% Done:

100%

Estimated time:
Chirp Version:
daily
Model affected:
KG-UV6D
I read the instructions above:

Description

I want to point out that the new KG-UV6D HTs from Wouxun.us (2.5 and Public Service versions) have an extended UHF frequency range: TX & RX - 136-174 & 420-520 (see attached). You might want to provide a new model selection covering those ranges like you have for the KG-UV6X or update the KG-UV6D frequency range. Just a suggestion.


Files

Wouxun.us KG-UV6D.pdf (169 KB) Wouxun.us KG-UV6D.pdf Chuck Burton, 08/31/2012 02:55 PM
RadioImage.jpg (270 KB) RadioImage.jpg Chuck Burton, 10/03/2012 07:57 AM
KGUV6DV2.5.img (8 KB) KGUV6DV2.5.img Chuck Burton, 10/03/2012 09:29 AM
Actions #1

Updated by Filippi Marco over 11 years ago

  • Status changed from New to In Progress
  • Assignee set to Filippi Marco
  • Chirp Version changed from 0.2.2 to daily

More in general wouxun produce a number of KG-UV6 sub model where the only apparent difference is the frequency range.
I found where the range is stored in memory and how to decode it.
I'm now going to update KG-UV6 driver to correctly use it.

If you send an image of your radio and its frequency range it'll help me testing code.

Actions #2

Updated by Chuck Burton over 11 years ago

According to the wouxun.us website and the attachment I sent, the frequency range is: TX & RX - 136-174 & 420-520. I should point out that the sticker in the battery compartment with the frequency ranges is misprinted according to Ed Griffin of wouxun.us, and the label on the box is correct. I have attached the label from the box (RadioImage.jpg) with the correct frequency ranges.

Actions #3

Updated by Filippi Marco over 11 years ago

Please send also a memory image of your radio saved using latest chirp daily version. Tnx

Actions #4

Updated by Chuck Burton over 11 years ago

Attached.

Actions #5

Updated by Chuck Burton over 11 years ago

What is the status on the update and in which daily update are the changes installed?

Thanks

Actions #6

Updated by Filippi Marco over 11 years ago

Sorry for delay but I'm a little busy this days, writing the changes will take me a few days more.
FYI I have (or at least I believe to have) all info needed to decode the frequency range of any KG-UV6 submodel.
I'll update this issue once the update will be ready.
TNX

Actions #7

Updated by Filippi Marco over 11 years ago

  • Status changed from In Progress to Feedback
  • % Done changed from 0 to 100

I sent the patch the developer list and it will be included in next days daily build.

I'll wait for feedback before closing this issue, please let me know

Actions #8

Updated by Chuck Burton over 11 years ago

Tried chirp-daily-20121013.app, but it still rejects entry of frequencies 350.000 and 520.000 MHz as "out of supported range."

Actions #9

Updated by Filippi Marco over 11 years ago

I see in the memory image that your radio should accept frequencies in ranges 136-174 & 420-520 exactly as you wrote some messages ago.
This mean that radio should be able to go anywhere from 420.0000 to 519.9999 in the Uhf range, you should not be able to go outside this using radio keypad.
As per your information 350.0000 and 520.0000 are outside the available range so radio and chirp refuses to go there

Or I'm wrong and radio can go there?

Actions #10

Updated by Chuck Burton over 11 years ago

For my radio, it is 420-520, but there is a commercial version that goes from 350-470 (see the "Wouxun.us KG-UV6D.pdf" document). As for not being able to use 520, I did try 519.999, with the same result. The spec for the radio does say 520 and Wouxun.us says it should be able to go to that frequency, but I can live with 519.9999 - close enough for government work.

Not sure if your fix was put into the 10/13/2012 build, which is why I waited. But a new daily build did not come out yesterday, so I tried the 13th version.

Actions #11

Updated by Filippi Marco over 11 years ago

Ok, I owe you an explanation.
In the memory image is written the actual frequency range of the radio, that value is read at image load so that the software can adapt to each KG-UV6. This way the very same software check for 420-520 range when used with your radio and for 350-470 when used with a commercial version.

Now, for the 520-519.9999 question, which is the highest frequency your radio actually can be tuned?
For the information I have, your radio should go up to 519.9975 not a Hz more and this is the maximum value chirp accept.
(I'm sorry, I've written 519.9999 in the previous message, I forget to take into account the 2.5 step)

Hope this can help ... despite my bad English ;)

Actions #12

Updated by Chuck Burton over 11 years ago

No problem !!! I believe you have covered my initial Feedback input. I appreciate all the back and forth and your explanations. You can certainly close this item.

73s, Chuck K9CBX

Actions #13

Updated by Filippi Marco over 11 years ago

  • Status changed from Feedback to Closed

Tnx Chuck for your collaboration

73 de IZ3GME Marco

Actions

Also available in: Atom PDF