Project

General

Profile

Actions

Bug #341

closed

Alinco DR-135T PL tones not programmed correctly

Added by Dan Butler about 12 years ago. Updated about 12 years ago.

Status:
Closed
Priority:
Normal
Assignee:
Category:
-
Target version:
Start date:
11/01/2012
Due date:
% Done:

100%

Estimated time:
Chirp Version:
0.2.3
Model affected:
DRx35
Platform:
Linux
Debug Log:
I read the instructions above:

Description

PLL tones not programmed correctly. I used CHIRP to configure my new Alinco DR-135T. Set the PL tones to 162.2 as normal for repeaters around here. Upon programming the radio, they show up in the radio as 167.9. In order to get them to show up in the radio correctly, I have to select 159.8 in CHIRP. BTW, this does not seem to be a simple "off by one" error as PL tone 100hz correctly transfers to the radio as 167.9. In order to get them to show up in the radio correctly, I have to select 159.8 in CHIRP. BTW, this does not seem to be a simple "off by one" error as PL tone 100hz correctly transfers to the radio.

Configuration: OS: Ubuntu 10.04, CHIRP Version 0.2.3, Radio: Alinco DR-135T Reproducibility: 100%

I emailed this description to Dan Smith who added the following:
"It is an off-by-one, because Alinco doesn't include a few of the higher tones, making the off-by-one start somewhere in the list."

I stand by willing to assist in resolving this issue: Recreating this bug as needed, testing patches, etc.


Files

Alinco PLL tone page.pdf (44 KB) Alinco PLL tone page.pdf Dan Butler, 11/02/2012 09:00 AM
alinco.py (12 KB) alinco.py Tom Hayward, 11/02/2012 10:29 AM
Alinco DR135T read.img (4 KB) Alinco DR135T read.img Dan Butler, 11/02/2012 07:42 PM
Actions

Also available in: Atom PDF