Bug #3443
closedCHIRP and Baofeng UV-6r
0%
Description
Dear Friends!There is support version for Baofeng UV-6r in CHIRP? Thank you so much!
Updated by fabio dotti about 8 years ago
i've just try to use the last version of CHIRP, but no way, the sw doesn't recognize the radio.
The cable is ok, because with another sw i've just update the channel list, but also with that something isn't working.
should be good to have CHIRP working with Pofung UV-6R
Updated by Dewey Knox almost 8 years ago
fabio dotti wrote:
i've just try to use the last version of CHIRP, but no way, the sw doesn't recognize the radio.
The cable is ok, because with another sw i've just update the channel list, but also with that something isn't working.
should be good to have CHIRP working with Pofung UV-6R
I would Like to echo this issue. I now have 2 Pofung UV-6R that will not program with Chirp. I can get them to program with the same equipment just the factory software. The software to say simply, sucks. Hard programing, no copy paste, etc issues with that software.
Can we get Chirp working on these radios?
Dewey
Updated by Jim Unroe over 7 years ago
- Status changed from New to Closed
Support was added in the CHIRP-2016019 build.
Jim KC9HI
Updated by taha sinan over 7 years ago
Jim Unroe wrote:
Support was added in the CHIRP-2016019 build.
Jim KC9HI
uv-6r help
----uhf issue problem not receiving---wrong software
Updated by taha sinan over 7 years ago
taha sinan wrote:
Jim Unroe wrote:
Support was added in the CHIRP-2016019 build.
Jim KC9HI
uv-6r help
----uhf issue problem not receiving---wrong software
baofeng uv-6r software < It must be such as UV- 5R
Updated by taha sinan over 7 years ago
taha sinan wrote:
taha sinan wrote:
Jim Unroe wrote:
Support was added in the CHIRP-2016019 build.
Jim KC9HI
uv-6r help
----uhf issue problem not receiving---wrong software
baofeng uv-6r software < It must be such as UV- 5R
please help in time the short :)
Updated by taha sinan over 7 years ago
Vinicius Dias wrote:
Dear Friends!There is support version for Baofeng UV-6r in CHIRP? Thank you so much!
PLEASE HELP!!!
UHF İSSUE PROBLEM....
Updated by Jim Unroe over 7 years ago
CHIRP can't help with a hardware issue. Have you uploaded the backup image that you made from the first successful download?
Jim KC9HI
Updated by taha sinan over 7 years ago
Jim Unroe wrote:
CHIRP can't help with a hardware issue. Have you uploaded the backup image that you made from the first successful download?
Jim KC9HI
dear jim thank you :)
frequency can be expanded with the original software can be expanded frequency chirp Is it possible to add a ---Is it possible to add it to chirp software?
128-286 MHz, 400-573 MHz can be expanded with the original software (rx-tx) range...
Is it possible to add this feature a chirp ? :) thank you jimm