Bug #4307
closedBF-F8HP radio model no longer working with UV-5RTP
100%
Description
I have also used this radio model profile to program UV-5RTP radios, in the past. Today it no longer seems to work. I get a "Incorrect 'Model' selected" error message. Firmware showing is: Message 1- HN5RV01, Message 2 - 1FB297
Updated by Patrick Caulfield almost 8 years ago
I am using the 20161208 CHIRP Build.
Updated by Jim Unroe almost 8 years ago
- Status changed from New to Feedback
Hi Patrick,
Unfortunately Baofeng has been recently programming firmware the UV-5RTP (a radio that has 3 power levels) so that they identify themselves to CHIRP as being radios that has 2 power levels. You will have to select UV-5R to program it.
Jim KC9HI
Updated by Michal I almost 8 years ago
Same FW (HN5RV01/1FB297), same problem. CHIRP daily-20161208.
Choosing UV-5R in Chirp works almost fine, only not able to set low power.
Currently "low" in Chirp is "middle" in HT, and "middle" is "high".
Any chances to get this device recognized properly by Chirp (and set power levels)?
Can send default memory dump if needed.
Mike EI7HQB
Updated by Jim Unroe over 7 years ago
The solution for this issue is being addressed "here":http://chirp.danplanet.com/issues/4445#note-12
Jim KC9HI
Updated by Jim Unroe almost 5 years ago
- Status changed from Feedback to Resolved
- Target version set to chirp-legacy
- % Done changed from 0 to 100
- Chirp Version changed from 0.4.0 to daily
- Platform changed from Windows to All
related to #4445