Bug #4401

Baofeng UV-3R+ Radio does not turn on after CHIRP

Added by Tomás Senabre González about 4 years ago. Updated about 4 years ago.

Status:Rejected Start date:01/13/2017
Priority:Normal Due date:
Assignee:- % Done:

0%

Category:-
Target version:-
Chirp Version:0.4.0 Platform:Windows
Model affected:UV-3R+

Description

The radio does not turn on after programming the frequencies with chirp, the error is:

Radio did not ACK first command

1) Connect a Baofeng UV-3R+ radio to a Debian Jessie 8.2 laptop using a "Baofeng cable".
2) Power up the radio.
3) Choose "Download from Radio" in the Radio menu, with port /dev/ttyUSB0, Vendor Baofeng et Model UV-3R.
4) Copy and paste frequencies from other *.img (UV-5R)
5) "Upload to Radio" and it gives me error:
Radio did not ACK first command
6) The Radio hangs and does not respond to any key.
7) The only way to turn off the radio was to remove the battery.
8) Never again turned on

2017_01_11_Baofeng_UV-3R _ea5akm.img (3.6 kB) Tomás Senabre González, 01/13/2017 12:45 am

History

Updated by Tomás Senabre González about 4 years ago

Sorry for this bug, but after examining the radio, the fault is from the electronics of the radio and it is not a CHIRPS fault.
It was a coincidence that the fault occurred precisely when I was using the CHIRP.

I repeat, sorry and ignore this bug

Updated by Filippi Marco about 4 years ago

  • Status changed from New to Rejected

Rejected as per user info

Also available in: Atom PDF