Actions
Bug #4455
closedNew firmware version on the Leixen VV-898S
Status:
Closed
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
01/24/2017
Due date:
% Done:
0%
Estimated time:
Chirp Version:
daily
Model affected:
Leixen VV-898S
Platform:
Windows
I read the instructions above:
Description
I wanted to programm my Leixen VV-898S and it didn't worked. The memory can't read out correctly.
According to http://www.miklor.com/VV898S/VV898S-NewModel.php there is a new firmware version out, which isn't supported by Chirp.
I've tested a bit around and found out, if I select "Jetstream JT270MH" it can read out the memory correct, but I can only select 2 power levels not 3 levels as should be.
I hope, this problem can be easily fixed and I can program my Leixen.
Related issues
Updated by Mark Jeffs about 7 years ago
Discussion about this here: [[[http://chirp.danplanet.com/issues/4069]]]
Updated by Bernhard Hailer about 4 years ago
- Tracker changed from New Model to Bug
- Status changed from New to Closed
- Model affected set to Leixen VV-898S
- Platform set to Windows
Duplicates #4069. Please follow and post there. Thanks!
Actions